Commit Graph

1225 Commits

Author SHA1 Message Date
Igor Mammedov
e358edc8e9 hw:piix4:acpi: reuse pcihp code for legacy PCI hotplug
reduces acpi PCI hotplug code duplication by ~200LOC

Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2014-02-05 16:55:50 +02:00
Igor Mammedov
a1b4d9eff9 pcihp: remove unused AcpiPciHpPciStatus.device_present field
Remove now unused 'device_present' field wich was obsoleted by
patch "pcihp: reduce number of device check events"

Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2014-02-05 16:55:50 +02:00
Igor Mammedov
99d09dd328 pcihp: make pci_read() mmio calback compatible with legacy ACPI hotplug
due to recent change introduced by:
"pcihp: reduce number of device check events"

'up' field is cleared right after it's read.
This is incompatible with legacy BIOS ACPI code
where PCNF ACPI method reads this field 32 times.

To make pci_read mmio callback compatible with legacy
'up' behavior, pcihp code will need to know in which
mode it runs add 'legacy_piix' field to AcpiPciHpState
structure and alter register behavior accordingly.

Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2014-02-05 16:55:49 +02:00
Michael S. Tsirkin
5a2223ca26 pcihp: reduce number of device check events
PIIX created a made-up value for the UP register since it was read by
guest 32 times for each interrupt.
There's no reason to do this for the new PCIHP: register is only read
once for each interrupt, so clean up code by making read act as an
interrupt acknowledgement: the new UP register clear on read.

In this way we cut down the number of bus rescans
by a factor of 32, and drop a bunch of code that's
now unused.

Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2014-02-05 16:55:49 +02:00
Peter Maydell
2b2449f7e4 This patch set contains the sclp defines and events for cpu hotplug,
the initial sclp defines (without code yet) for standby memory (some
 sort of memory hotplug) as well as a cleanup of the kvm register
 synchronization.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.11 (GNU/Linux)
 
 iQIcBAABAgAGBQJS62TFAAoJEBF7vIC1phx8JxkP/08axK8hluncGLU8P5p1y6JG
 iNiD4j7/zUj+5gDf6eC3r0/F4brhiXhZdBXrXqPpnrzX5NsWuhzlXKJpdmobB7Q6
 G2BR8pDm8iz6ljLv77Um1PCrpPteExKP8HJrWO1JivQmzLvCEZg+muf426rokpPp
 h9W3UpQNKBnvPuLrOx8keU+XyyBi9CzXt/w+KsiB7YWJ/nGBwW8a4MSca+/x0JTo
 XGmpy6x8j0ewqi9LNxq20CSHriNsbdng3/4nauA8oU9RyWGA9sW1F2YwWGRZCGDz
 aXAhzYkzuUUjPytWFrGMAohcbcUZKMhEakiovxt7E+PccQcCyx13pguaR3OzRAZs
 btVlnPevHw3uqxcLmTPG6rYFJ/mDWxWJilykYF6aGp5Jdw3lMx1tQbW1EZwXbkqo
 6oPqSsHe4vs0GXjcGdDS4PbOtode2vMt4mJqZyX+5W+Jr8ZYmIG9b98WqUXB+jfK
 nkjjxT6MPeKhP1UIyncSdNqLnwOIc3uSSiKnrvOs0I7TJbRt1lWlyb/plmRKDqu1
 57XhfKAjtl9tpwaZcZ76x3K8tRzouVj7RfEywpuODLMNLqGGFtObl1OTbRrOjIgM
 lhK3+mqhjpZ/HZTyFOHKpzxId+P7mlyiDppeGU3H5ySrwOeKnDz2hlfTWh4B10c4
 umP35zBhKTeU4qXFYfRG
 =Aodz
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'remotes/borntraeger/tags/kvm-s390-20140131' into staging

This patch set contains the sclp defines and events for cpu hotplug,
the initial sclp defines (without code yet) for standby memory (some
sort of memory hotplug) as well as a cleanup of the kvm register
synchronization.

# gpg: Signature made Fri 31 Jan 2014 08:54:29 GMT using RSA key ID B5A61C7C
# gpg: Can't check signature: public key not found

* remotes/borntraeger/tags/kvm-s390-20140131:
  s390x/kvm: cleanup partial register handling
  sclp-s390: Define new SCLP codes and structures
  s390-sclp: SCLP Event integration
  s390-sclp: SCLP CPU Info
  s390-sclp: Define New SCLP Codes

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-02-04 18:46:33 +00:00
Edgar E. Iglesias
ce603d8ef1 cris: Remove the CRIS PIC glue
Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
2014-02-03 14:04:00 +00:00
Peter Maydell
2f61120c10 Merge remote-tracking branch 'qmp-unstable/queue/qmp' into staging
* qmp-unstable/queue/qmp:
  monitor: Cleanup mon->outbuf on write error
  virtio_rng: replace custom backend API with UserCreatable.complete() callback
  add optional 2nd stage initialization to -object/object-add commands
  vl.c: -object: don't ignore duplicate 'id'
  object_add: consolidate error handling

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-02-01 23:32:31 +00:00
Peter Maydell
b4a8c9ae97 target-arm queue:
* implementation of first part of the A64 Neon instruction set
  * v8 AArch32 rounding and 16<->64 fp conversion instructions
  * fix MIDR value on Zynq boards
  * some minor bugfixes/code cleanups
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.11 (GNU/Linux)
 
 iQIcBAABCAAGBQJS67v6AAoJEDwlJe0UNgzeQfQP/26wGyhmrdBzbEa3OK2LRRHz
 4zif7QXnIo9teo18ch0RaRthNAJX7NpfnhhCxrRWiw2RynvD/YrDwUKptxDZOzTx
 msVFL64ZdR+7xtTS0etYpMgUzF/MXwlq11I0dmod9eD1tETUaEcC8XJkGZDr6o16
 2uTNjAfBjOBK0mDoYdKMJuz7d+qqhl8s/TRYTA50kWUERFfXxI03/axHtCkI7/fa
 aT8c2tkyVs8pqCmcs5BXU1Wn+8H15EeYIWIqGEB8sWTGsxfie95aIlqex2m1RtVI
 Rij231HimiQdVkTMVeI5Yxu400PeQ8igGbjDyLJB6UgzX/5otGKaKL1x2LI0ArxU
 oCjY3WV4OGnLYdSyMsSocemd/nBkeH2ntCDY3yl1XCqavR09UlgNgnffBAWq2qgA
 twmCXXGjj4B0KLECqAMtsLspVqSPaZDjrh6+lzMJB04xS0A7M0g+GPpioibg8XXR
 caGYbcRlCd8UwtLx8w1dnephiZtUTnits/C0bcHfmUwQ+JHGwLnCmRhuJnVze6mQ
 62Of6A++P0+/1CofMxn+DqfZT6uwVM2gcexE2YLShnD3k147yWjivAoE8kpEDNSt
 kfOf6CcdAORw4Q3/1KLF59WYyvJQ5bwx9Tlg3BY+uQspBJooGL9klDV0J+DQc170
 XoOYkaUPoHELWhW+nH9P
 =KIzb
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'pmaydell/tags/pull-target-arm-20140131' into staging

target-arm queue:
 * implementation of first part of the A64 Neon instruction set
 * v8 AArch32 rounding and 16<->64 fp conversion instructions
 * fix MIDR value on Zynq boards
 * some minor bugfixes/code cleanups

# gpg: Signature made Fri 31 Jan 2014 15:06:34 GMT using RSA key ID 14360CDE
# gpg: Good signature from "Peter Maydell <peter.maydell@linaro.org>"

* pmaydell/tags/pull-target-arm-20140131: (34 commits)
  arm_gic: Fix GICD_ICPENDR and GICD_ISPENDR writes
  arm_gic: Introduce define for GIC_NR_SGIS
  target-arm: A64: Add SIMD shift by immediate
  target-arm: A64: Add simple SIMD 3-same floating point ops
  target-arm: A64: Add integer ops from SIMD 3-same group
  target-arm: A64: Add logic ops from SIMD 3 same group
  target-arm: A64: Add top level decode for SIMD 3-same group
  target-arm: A64: Add SIMD scalar 3 same add, sub and compare ops
  target-arm: A64: Add SIMD three-different ABDL instructions
  target-arm: A64: Add SIMD three-different multiply accumulate insns
  target-arm: Add AArch32 SIMD VCVTA, VCVTN, VCVTP and VCVTM
  target-arm: Add AArch32 FP VCVTA, VCVTN, VCVTP and VCVTM
  target-arm: Add AArch32 SIMD VRINTA, VRINTN, VRINTP, VRINTM, VRINTZ
  target-arm: Add set_neon_rmode helper
  target-arm: Add support for AArch32 SIMD VRINTX
  target-arm: Add support for AArch32 FP VRINTX
  target-arm: Add support for AArch32 FP VRINTZ
  target-arm: Add support for AArch32 FP VRINTR
  target-arm: Add AArch32 FP VRINTA, VRINTN, VRINTP and VRINTM
  target-arm: Move arm_rmode_to_sf to a shared location.
  ...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-02-01 23:06:26 +00:00
Peter Maydell
850bbe1b94 vfio-pci updates include:
- Destroy MemoryRegions on device teardown
  - Print warnings around PCI option ROM failures
  - Skip bogus mappings from 64bit BAR sizing
  - Act on DMA mapping failures
  - Fix alignment to avoid MSI-X table mapping
  - Fix debug macro typo
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJS58xzAAoJECObm247sIsiuqIP/24fhvWwRRwgc/gFpQ/7KbeP
 nUkQdx6TEOK6f0+HOQOD9HtQAiSytJhB6jZQVYfN8MWrp3QzizGH56enR6FOj86C
 9/bnpWYvjDpO/CkdxOdl7aEX/S4LMjoz/2+UmulTxrpt5cpJrsnBTqEuBiMfqwDP
 A50DHHk89uEZWaDkZvdUOc8cOFNAw4p+c20UY6DWIi/SSJlD2BPdH2FhxWE2sT9Z
 60qShybMBTYBYdom3PURzIX8g+DyY9Kzn0d2g108ereaVvYjjwOLcB3HM4W/dSJ6
 rKNGQH+lZHmL4LpWflXlqkZPn31OhOkkks6xncLnfGztRz8ghBs/wj9M+wd8hFKT
 tTf+iwmTCMFF/Lg8RIK4zUMmWgeGq0KN+9bgtJ02nuXe2q782xghxjowJPkbkuHr
 Z+ja+xmL84MyU0UD66oOubxO1RmkBPAzagBjzkJEzj/Kl0JgTqFLYhdo1bQJ1KlV
 3AbnhyR+7p+eHh7AayymhLbwdW1p6qNnEKEKc2yofsV58u4j5teed6WL/QOQQsR2
 lAdR2o6/BjELVQ/ibsbR6yqQxGoG2Y/FdPwiA3IiN+g5dw/oiYOEOHvTHAVB3f4C
 gMPCny+qO4v27Am0iuNrlA6udpc8zNMcgwrVFU+ZmCvePU08+6Jvu8PwgJLruSTx
 l29PsKGSk8fa4a2d0DJO
 =J3ON
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'remotes/awilliam/tags/vfio-pci-for-qemu-20140128.0' into staging

vfio-pci updates include:
 - Destroy MemoryRegions on device teardown
 - Print warnings around PCI option ROM failures
 - Skip bogus mappings from 64bit BAR sizing
 - Act on DMA mapping failures
 - Fix alignment to avoid MSI-X table mapping
 - Fix debug macro typo

# gpg: Signature made Tue 28 Jan 2014 15:27:47 GMT using RSA key ID 3BB08B22
# gpg: Can't check signature: public key not found

* remotes/awilliam/tags/vfio-pci-for-qemu-20140128.0:
  vfio: correct debug macro typo
  vfio: fix mapping of MSIX bar
  kvm: initialize qemu_host_page_size
  vfio-pci: Fail initfn on DMA mapping errors
  vfio: Filter out bogus mappings
  vfio: Do not reattempt a failed rom read
  vfio: warn if host device rom can't be read
  vfio: Destroy memory regions

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-02-01 21:08:06 +00:00
Christoffer Dall
41ab7b5510 arm_gic: Introduce define for GIC_NR_SGIS
Instead of hardcoding 16 various places in the code, use a define to
make it more clear what is going on.

Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-01-31 14:47:38 +00:00
Peter Maydell
0159a64397 acpi,pci,pc,virtio fixes and enhancements
This includes new unit-tests for acpi by Marcel,
 hotplug for pci bridges by myself (piix only so far)
 and cpu hotplug for q35.
 And a bunch of fixes all over the place as usual.
 
 I included the patch to fix memory alignment for q35
 as well - even though it limits 32 bit guests to 3G (they
 previously could address more memory with PAE).
 To remove the limit, this will have to be fixed in seabios.
 
 I also added self as virtio co-maintainer so I don't need
 to troll the list for patches to review.
 
 Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQEcBAABAgAGBQJS5O2JAAoJECgfDbjSjVRpBRsH/iueYMYqtlIOCFSBf4TSU5LN
 3369DwM0EncrEIZhv6jjtX+CSKUca9IXkKcvBBHJOTwhUodGNZ1wJ/FpO9+AhjpB
 5XlIcF4nOi2eYDGs/8JToecK+edggTrSjJ8Bg5n7/bEtJ/oNyjTQ0RMX+2jXq1y3
 jnpVjO1ntQXkZQZWNM3O+8biVT1o8wJlFhFbYpx4TKgFplPnRrg1gZR3MtnhsZ+M
 OoBenpJYrh5Gw52d6HPauMDAux51MjGymzrk2Wmd/w3hPMP9BcxX7NvoapKlGTg9
 DkVr7cvbIzZ2JnsRLFNeWsJIupOjl6MwqhGJo5WcB5VS7NZTbVHmtBRvqKa76EU=
 =y3wE
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'mst/tags/for_anthony' into staging

acpi,pci,pc,virtio fixes and enhancements

This includes new unit-tests for acpi by Marcel,
hotplug for pci bridges by myself (piix only so far)
and cpu hotplug for q35.
And a bunch of fixes all over the place as usual.

I included the patch to fix memory alignment for q35
as well - even though it limits 32 bit guests to 3G (they
previously could address more memory with PAE).
To remove the limit, this will have to be fixed in seabios.

I also added self as virtio co-maintainer so I don't need
to troll the list for patches to review.

Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

# gpg: Signature made Sun 26 Jan 2014 11:12:09 GMT using RSA key ID D28D5469
# gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>"
# gpg:                 aka "Michael S. Tsirkin <mst@redhat.com>"
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg:          There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 0270 606B 6F3C DF3D 0B17  0970 C350 3912 AFBE 8E67
#      Subkey fingerprint: 5D09 FD08 71C8 F85B 94CA  8A0D 281F 0DB8 D28D 5469

* mst/tags/for_anthony: (35 commits)
  MAINTAINERS: add self as virtio co-maintainer
  q35: document gigabyte_align
  q35: gigabyte alignment for ram
  acpi: Fix PCI hole handling on build_srat()
  pc: Save size of RAM below 4GB
  hw/pci: fix error flow in pci multifunction init
  acpi-test: update expected AML since recent changes
  pc: ACPI: update acpi-dsdt.hex.generated q35-acpi-dsdt.hex.generated
  pc: ACPI: unify source of CPU hotplug IO base/len
  pc: ACPI: expose PRST IO range via _CRS
  pc: Q35 DSDT: exclude CPU hotplug IO range from PCI bus resources
  pc: PIIX DSDT: exclude CPU/PCI hotplug & GPE0 IO range from PCI bus resources
  pc: set PRST base in DSDT depending on chipset
  acpi: ich9: add CPU hotplug handling to Q35 machine
  acpi: factor out common cpu hotplug code for PIIX4/Q35
  acpi-build: enable hotplug for PCI bridges
  piix4: add acpi pci hotplug support
  pcihp: generalization of piix4 acpi
  pci: add pci_for_each_bus_depth_first
  pc: make: fix dependencies: rebuild when included file is changed
  ...

Message-id: 1390735289-15563-1-git-send-email-mst@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-01-31 00:23:27 +00:00
Peter Maydell
0706f7c85b trivial-patches for 2014-01-16
-----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.12 (GNU/Linux)
 
 iJwEAAECAAYFAlLYFuEACgkQUlPFrXTwyDjuGAQAqa23FDOF4VLnNNAkL37Aje3V
 CyroMi1Dj3WcKcbD8mEZOgZV5B/W5h6+v11JJdTkCTdOuiXYM3O+y4l3jxGhxcS2
 yxzCOMP5NrM7D1WogeFogbjabTq1Lm83FLXCgPCWi2rDIhPLQ6RPaMNNPyDdHHih
 aSuZo8EfnJOUcephR0I=
 =HvPH
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'mjt/tags/trivial-patches-2014-01-16' into staging

trivial-patches for 2014-01-16

# gpg: Signature made Thu 16 Jan 2014 17:29:05 GMT using RSA key ID 74F0C838
# gpg: Good signature from "Michael Tokarev <mjt@tls.msk.ru>"
# gpg:                 aka "Michael Tokarev <mjt@corpit.ru>"
# gpg:                 aka "Michael Tokarev <mjt@debian.org>"
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg:          There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 6EE1 95D1 886E 8FFB 810D  4324 457C E0A0 8044 65C5
#      Subkey fingerprint: E190 8639 3B10 B51B AC2C  8B73 5253 C5AD 74F0 C838

Message-id: 1389893719-16336-1-git-send-email-mjt@msgid.tls.msk.ru
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-01-30 13:56:00 +00:00
Igor Mammedov
57d3e1b3f5 virtio_rng: replace custom backend API with UserCreatable.complete() callback
in addition fix default backend leak by releasing it if its
initialization failed.

Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2014-01-28 12:47:11 -05:00
Igor Mammedov
269e09f3fc add optional 2nd stage initialization to -object/object-add commands
Introduces USER_CREATABLE interface that must be implemented by
objects which are designed to created with -object CLI option or
object-add QMP command.

Interface provides an ability to do an optional second stage
initialization of the object created with -object/object-add
commands. By providing complete() callback, which is called
after the object properties were set.

It allows to:
 * prevents misusing of -object/object-add by filtering out
   objects that are not designed for it.
 * generalize second stage backend initialization instead of
   adding custom APIs to perform it
 * early error detection of backend initialization at -object/
   object-add time rather than through a proxy DEVICE object
   that tries to use backend.

Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2014-01-28 12:47:02 -05:00
Matthew Rosato
234eef51a1 sclp-s390: Define new SCLP codes and structures
Define new SCLP codes and structures that will be needed for
s390 memory hotplug.

Signed-off-by: Matthew Rosato <mjrosato@linux.vnet.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2014-01-28 12:22:33 +01:00
Eduardo Habkost
f30ee8a968 pc: Save size of RAM below 4GB
The ram_below_4g value will be useful in other places, such as the ACPI
table code, and other code that currently requires passing
below_4g_mem_size around in function arguments.

Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2014-01-26 13:11:45 +02:00
Igor Mammedov
e4cf8ed08a pc: ACPI: unify source of CPU hotplug IO base/len
use C headers defines as source of IO base/len for respective
values in ASL code.

Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2014-01-26 13:11:44 +02:00
Igor Mammedov
d6610bc2ad acpi: ich9: add CPU hotplug handling to Q35 machine
.. use IO port 0cd8-0xcf7 range for CPU present bitmap

Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2014-01-26 13:11:44 +02:00
Igor Mammedov
81cea5e7f2 acpi: factor out common cpu hotplug code for PIIX4/Q35
.. so it could be used for adding CPU hotplug to Q35 machine

Add an additional header with that will be shared between
C and ASL code: include/hw/acpi/cpu_hotplug_defs.h

Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2014-01-26 13:11:44 +02:00
Michael S. Tsirkin
9e047b9824 piix4: add acpi pci hotplug support
Add support for acpi pci hotplug using the
new infrastructure.
PIIX4 legacy interface is maintained as is for
machine types 1.7 and older.

Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2014-01-26 13:11:44 +02:00
Michael S. Tsirkin
db4728e6fe pcihp: generalization of piix4 acpi
Add ACPI based PCI hotplug library with bridge hotplug
support.
Design
   - each bus gets assigned "bsel" property.
   - ACPI code writes this number
     to a new BNUM register, then uses existing
     UP/DOWN registers to probe slot status;
     to eject, write number to BNUM register,
     then slot into existing EJ.

The interface is actually backwards-compatible with
existing PIIX4 ACPI (though not migration compatible).

This is split out from PIIX4 codebase so we can
reuse it for Q35 as well.

Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2014-01-26 13:06:49 +02:00
Michael S. Tsirkin
eb0acfdde6 pci: add pci_for_each_bus_depth_first
Useful for ACPI hotplug.

Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2014-01-26 13:06:49 +02:00
Gabriel L. Somlo
15bce1b7c5 Add DSDT node for AppleSMC
AppleSMC (-device isa-applesmc) is required to boot OS X guests.
OS X expects a SMC node to be present in the ACPI DSDT. This patch
adds a SMC node to the DSDT, and dynamically patches the return value
of SMC._STA to either 0x0B if the chip is present, or otherwise to 0x00,
before booting the guest.

Signed-off-by: Gabriel Somlo <somlo@cmu.edu>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2014-01-26 13:06:48 +02:00
Anthony Liguori
f4b27793a8 usb core+hid: add support for microsoft os descriptors
-----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.22 (GNU/Linux)
 
 iQIcBAABAgAGBQJS3kopAAoJEEy22O7T6HE4PjkP/0NZqOSU3e9GmgeBfEpvgFfP
 4axBVEycXJtGc9nNfahmEIyUkk1+DMa8oMHnVSoVzelrdm2VNHs6qk9yC9EPa9YG
 HTXZuLvHbuIVL/NXY5b+loh4fOjbOPWEthdUd+RpNfH545Azoi2T/cYgtNz8BTyf
 eO3vCZy69NJjcsuk0zlRhEEAhnhKb+jkYgzARecL6JrAC7uuDrIhdz9peT1Du8k8
 lUnCLHFXrDaZUprkLrgvB+TTHJw9IgRq1g0gV20Gu+hDzBOJsG3cKXAl4X2b3lzO
 Ih+jcORu4ubURvOJSqTpcnObsQWKJHDR3sPeMAVD2ZzCd82ZOeH/+cEhfVBp+dZX
 qV2XbFU6yEiQBbzIuZEbsE4XWQVEAsfa8MaP/SdodJ4WueW21Rq8KDlnWzalPfDc
 T0hofDyLLcpkr2O3AM7OfBfLa37B4joV5FnuinvOo5r6byMMNgAYp7gbDVeIzEXJ
 Cs8N6KF0m8wX0KNyFms49VMTQnKm0MbuTYFbDBkW5jnxKHZ1ZLXdIP1HvYCvWp3w
 or0hxGze6Mrv8Aya9HUu7K0BEEbz8OLhVISkpOi35PGii2PcSm3lYHHhsohRYOcW
 EHilDyCn3Q20RkwcHi6YMy43T3eSJJnYwN4VWEb4lnDT5sjh/ehthxdtjCQHt8+f
 O1cBVvdDyh/BZt6SSuy8
 =sFbE
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'kraxel/tags/pull-usb-2' into staging

usb core+hid: add support for microsoft os descriptors

# gpg: Signature made Tue 21 Jan 2014 02:21:29 AM PST using RSA key ID D3E87138
# gpg: Can't check signature: public key not found

* kraxel/tags/pull-usb-2:
  usb-hid: add microsoft os descriptor support
  usb: add support for microsoft os descriptors

Message-id: 1390299772-5368-1-git-send-email-kraxel@redhat.com
Signed-off-by: Anthony Liguori <aliguori@amazon.com>
2014-01-24 15:51:23 -08:00
Kevin Wolf
9e1cb96d9a qemu-iotests: Test pwritev RMW logic
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
2014-01-24 17:40:25 +01:00
Kevin Wolf
8407d5d7e2 block: Make bdrv_pwrite() a bdrv_prwv_co() wrapper
Instead of implementing the alignment adjustment here, use the now
existing functionality of bdrv_co_do_pwritev().

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
2014-01-24 17:40:03 +01:00
Kevin Wolf
6460440f34 block: Allow wait_serialising_requests() at any point
We can only have a single wait_serialising_requests() call per request
because otherwise we can run into deadlocks where requests are waiting
for each other. The same is true when wait_serialising_requests() is not
at the very beginning of a request, so that other requests can be issued
between the start of the tracking and wait_serialising_requests().

Fix this by changing wait_serialising_requests() to ignore requests that
are already (directly or indirectly) waiting for the calling request.

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Benoit Canet <benoit@irqsave.net>
2014-01-24 17:40:02 +01:00
Kevin Wolf
7327145f63 block: Make overlap range for serialisation dynamic
Copy on Read wants to serialise with all requests touching the same
cluster, so wait_serialising_requests() rounded to cluster boundaries.
Other users like alignment RMW will have different requirements, though
(requests touching the same sector), so make it dynamic.

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Benoit Canet <benoit@irqsave.net>
2014-01-24 17:40:02 +01:00
Kevin Wolf
2dbafdc012 block: Generalise and optimise COR serialisation
Change the API so that specific requests can be marked serialising. Only
these requests are checked for overlaps then.

This means that during a Copy on Read operation, not all requests
overlapping other requests are serialised any more, but only those that
actually overlap with the specific COR request.

Also remove COR from function and variable names because this
functionality can be useful in other contexts.

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Benoit Canet <benoit@irqsave.net>
2014-01-24 17:40:02 +01:00
Kevin Wolf
793ed47a7a block: Switch BdrvTrackedRequest to byte granularity
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Benoit Canet <benoit@irqsave.net>
2014-01-24 17:40:02 +01:00
Paolo Bonzini
c25f53b06e raw: Probe required direct I/O alignment
Add a bs->request_alignment field that contains the required
offset/length alignment for I/O requests and fill it in the raw block
drivers. Use ioctls if possible, else see what alignment it takes for
O_DIRECT to succeed.

While at it, also expose the memory alignment requirements, which may be
(and in practice are) different from the disk alignment requirements.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
2014-01-24 17:40:02 +01:00
Paolo Bonzini
1b7fd72955 block: rename buffer_alignment to guest_block_size
The alignment field is now set to the value that is promised to the
guest, rather than required by the host.  The next patches will make
QEMU aware of the host-provided values, so make this clear.

The alignment is also not about memory buffers, but about the sectors on
the disk, change the documentation of the field.

At this point, the field is set by the device emulation, but completely
ignored by the block layer.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Wenchao Xia <xiawenc@linux.vnet.ibm.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Benoit Canet <benoit@irqsave.net>
2014-01-24 17:40:01 +01:00
Kevin Wolf
339064d506 block: Don't use guest sector size for qemu_blockalign()
bs->buffer_alignment is set by the device emulation and contains the
logical block size of the guest device. This isn't something that the
block layer should know, and even less something to use for determining
the right alignment of buffers to be used for the host.

The new BlockLimits field opt_mem_alignment tells the qemu block layer
the optimal alignment to be used so that no bounce buffer must be used
in the driver.

This patch may change the buffer alignment from 4k to 512 for all
callers that used qemu_blockalign() with the top-level image format
BlockDriverState. The value was never propagated to other levels in the
tree, so in particular raw-posix never required anything else than 512.

While on disks with 4k sectors direct I/O requires a 4k alignment,
memory may still be okay when aligned to 512 byte boundaries. This is
what must have happened in practice, because otherwise this would
already have failed earlier. Therefore I don't expect regressions even
with this intermediate state. Later, raw-posix can implement the hook
and expose a different memory alignment requirement.

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Wenchao Xia <xiawenc@linux.vnet.ibm.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
2014-01-24 17:40:01 +01:00
Kevin Wolf
355ef4ac95 block: Update BlockLimits when they might have changed
When reopening with different flags, or when backing files disappear
from the chain, the limits may change. Make sure they get updated in
these cases.

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Wenchao Xia <xiawenc@linux.vnet.ibm.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Benoît Canet <benoit@irqsave.net>
2014-01-24 17:40:01 +01:00
Kevin Wolf
d34682cd4a block: Move initialisation of BlockLimits to bdrv_refresh_limits()
This function separates filling the BlockLimits from bdrv_open(), which
allows it to call it from other operations which may change the limits
(e.g. modifications to the backing file chain or bdrv_reopen)

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Benoit Canet <benoit@irqsave.net>
2014-01-24 17:40:01 +01:00
Benoît Canet
212a5a8f09 block: Create authorizations mechanism for external snapshot and resize.
Signed-off-by: Benoit Canet <benoit@irqsave.net>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2014-01-24 16:07:08 +01:00
Benoît Canet
12d3ba821d qmp: Allow to change password on named block driver states.
Signed-off-by: Benoit Canet <benoit@irqsave.net>
Reviewed-by: Fam Zheng <famz@redhat.com>

There was two candidate ways to implement named node manipulation:

1)
{ 'command': 'block_passwd', 'data': {'*device': 'str',
                                      '*node-name': 'str', 'password': 'str'}
}

2)

{ 'command': 'block_passwd', 'data': {'device': 'str',
                                      '*device-is-node': 'bool',
                                      'password': 'str'} }

Luiz proposed 1 and says 2 was an abuse of the QMP interface and proposed to
rewrite the QMP block interface for 2.0.

Luiz does not like in 1 the fact that 2 fields are optional but one of them must
be specified leading to an abuse of the QMP semantic.

Kevin argumented that 2 what a clear abuse of the device field and would not be
practical when reading fast some log file because the user would read "device"
and think that a device is manipulated when it's in fact a node name.
Documentation of 1 make it pretty clear what to do for the user.

Kevin argued that all bs are node including devices ones so 2 does not make
sense.

Kevin also argued that rewriting the QMP block interface would not make disapear
the current one.

Kevin pushed the argument that making the QAPI generator compatible with the
semantic of the operation would need a rewrite that no one has done yet.

A vote has been done on the list to elect the version to use and 1 won.

For reference the complete thread is:
"[Qemu-devel] [PATCH V4 4/7] qmp: Allow to change password on names block driver
states."

Signed-off-by: Benoit Canet <benoit@irqsave.net>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2014-01-24 16:07:08 +01:00
Benoît Canet
c13163fba1 qmp: Add QMP query-named-block-nodes to list the named BlockDriverState nodes.
Signed-off-by: Benoit Canet <benoit@irqsave.net>
Reviewed-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2014-01-24 16:07:08 +01:00
Benoît Canet
dc364f4cdc block: Add bs->node_name to hold the name of a bs node of the bs graph.
Add the minimum of code to prepare for the following patches.

Signed-off-by: Benoit Canet <benoit@irqsave.net>
Reviewed-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2014-01-24 14:33:01 +01:00
Max Reitz
da557aac18 block: Add bdrv_open_image()
Add a common function for opening images to be used for block drivers
specified through BlockdevRefs in an option QDict. The difference from
bdrv_file_open() is that this function may invoke bdrv_open() instead,
allowing auto-detection of the driver to be used; and second, it
automatically extracts the BlockdevRef from the option QDict.

Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2014-01-22 12:07:18 +01:00
Max Reitz
72daa72eee block: Allow reference for bdrv_file_open()
Allow specifying a reference to an existing block device (by name) for
bdrv_file_open() instead of a filename and/or options.

Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2014-01-22 12:07:17 +01:00
Max Reitz
adf5c449e5 qemu-option: Add qemu_config_parse_qdict()
This function basically parses command-line options given as a QDict
replacing a config file.

For instance, the QDict {"section.opt1": 42, "section.opt2": 23}
corresponds to the config file:

[section]
opt1 = 42
opt2 = 23

It is possible to specify multiple sections and also multiple sections
of the same type. On the command line, this looks like the following:

inject-error.0.event=reftable_load,\
inject-error.1.event=l2_load,\
set-state.event=l1_update

This would correspond to the following config file:

[inject-error "inject-error.0"]
event = reftable_load

[inject-error "inject-error.1"]
event = l2_load

[set-state]
event = l1_update

Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2014-01-22 12:07:17 +01:00
Max Reitz
05a8c22271 qdict: Add qdict_array_split()
This function splits a QDict consisting of entries prefixed by
incrementally enumerated indices into a QList of QDicts.

Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2014-01-22 12:07:17 +01:00
Stefan Hajnoczi
4694020d3c qemu-io: add command completion
Autocomplete qemu-io commands at the interactive prompt.

Note this only completes command names and not their options.

Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2014-01-22 12:07:17 +01:00
Stefan Hajnoczi
13401ba0b9 osdep: add qemu_set_tty_echo()
Using stdin with readline.c requires disabling echo and line buffering.
Add a portable wrapper to set the terminal attributes under Linux and
Windows.

Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2014-01-22 12:07:17 +01:00
Stefan Hajnoczi
0150cd81cf readline: move readline to a generic location
Now that the monitor and readline are decoupled, readline.h no longer
belongs in include/monitor/.  Put the header into include/qemu/.

Move the source file into util/ so it can be linked as part of
libqemuutil.a.

Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2014-01-22 12:07:17 +01:00
Stefan Hajnoczi
c60bf3391b readline: decouple readline from the monitor
Make the readline.c functionality reusable.  Instead of calling
monitor_printf() and monitor_flush() directly, invoke function pointers
provided by the user.

This way readline.c does not know about Monitor and other users will be
able to make use of readline.c.

Note that there is already an "opaque" argument to the ReadLineFunc
callback.  Consistently call it "readline_opaque" from now on to
distinguish from the ReadLinePrintfFunc/ReadLineFlushFunc "opaque"
argument.

I also dropped the printf macro trickery since it's now highly unlikely
that anyone modifying readline.c would call printf(3) directly.  We no
longer need this protection.

Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2014-01-22 12:07:17 +01:00
Jason J. Herne
492044581c s390-sclp: SCLP Event integration
Add an sclp event for "cpu was hot plugged".  This allows Qemu to deliver an
SCLP interrupt to the guest stating that the requested cpu hotplug was
completed.

Signed-off-by: Jason J. Herne <jjherne@us.ibm.com>
Reviewed-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2014-01-21 16:48:39 +01:00
Jason J. Herne
8cc3aecf84 s390-sclp: SCLP CPU Info
Implement the CPU data in SCLP "Read SCP Info".  And implement "Read CPU Info"
SCLP command. This data will be used by the guest to get information about hot
plugged cpus.

Signed-off-by: Jason J. Herne <jjherne@us.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2014-01-21 16:20:57 +01:00
Jason J. Herne
5f04c14a10 s390-sclp: Define New SCLP Codes
Define new SCLP codes to improve code readability.

Signed-off-by: Jason J. Herne <jjherne@us.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2014-01-21 16:20:54 +01:00