a target may issue a SCSI_STATUS_TASK_SET_FULL status
if there is more than one "BUSY" command queued already.
Signed-off-by: Peter Lieven <pl@kamp.de>
Message-id: 1429193313-4263-8-git-send-email-pl@kamp.de
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The idea is that a command is retried in a BUSY condition
up a time of approx. 60 seconds before it is failed. This should
be far higher than any command timeout in the guest.
Signed-off-by: Peter Lieven <pl@kamp.de>
Message-id: 1429193313-4263-7-git-send-email-pl@kamp.de
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
SCSI allowes to tell the target to not return from a write command
if the date is not written to the disk. Use this so called FUA
bit if it is supported to optimize WRITE commands if writeback is
not allowed.
In this case qemu always issues a WRITE followed by a FLUSH. This
is 2 round trip times. If we set the FUA bit we can ignore the
following FLUSH.
Signed-off-by: Peter Lieven <pl@kamp.de>
Message-id: 1429193313-4263-6-git-send-email-pl@kamp.de
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Peter Lieven <pl@kamp.de>
Message-id: 1429193313-4263-5-git-send-email-pl@kamp.de
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Peter Lieven <pl@kamp.de>
Message-id: 1429193313-4263-4-git-send-email-pl@kamp.de
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Peter Lieven <pl@kamp.de>
Message-id: 1429193313-4263-3-git-send-email-pl@kamp.de
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
We actually were always impolitely dropping the connection and
not cleanly logging out.
CC: qemu-stable@nongnu.org
Signed-off-by: Peter Lieven <pl@kamp.de>
Message-id: 1429193313-4263-2-git-send-email-pl@kamp.de
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
newer libiscsi versions may return zero events from iscsi_which_events.
In this case iscsi_service will return immediately without any progress.
To avoid busy waiting for iscsi_which_events to change we deregister all
read and write handlers in this case and schedule a timer to periodically
check iscsi_which_events for changed events.
Next libiscsi version will introduce async reconnects and zero events
are returned while libiscsi is waiting for a reconnect retry.
Signed-off-by: Peter Lieven <pl@kamp.de>
Message-id: 1428437295-29577-1-git-send-email-pl@kamp.de
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
The variable user in struct iscsi_url is a character array, not a pointer.
Therefore its address will never be NULL.
clang reports this error:
block/iscsi.c:1329:20: warning:
comparison of array 'iscsi_url->user' not equal to a null pointer
is always true [-Wtautological-pointer-compare]
Reviewed-by: Peter Lieven <pl@kamp.de>
Acked-by: Peter Lieven <pl@kamp.de>
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Message-Id: <1425719670-5486-1-git-send-email-sw@weilnetz.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Save the write protected flag and check before reopen.
Signed-off-by: Fam Zheng <famz@redhat.com>
Message-Id: <1424839208-5195-1-git-send-email-famz@redhat.com>
[Fixed typo in the name of the new field. - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Version: GnuPG v1
iQEcBAABAgAGBQJUV2wdAAoJEJykq7OBq3PIjcAH/29rl938ETw1wjXxYe3uH+R6
K2yFEiPh9/cOJSH0mJ+gD8DZIN+iyR4eoQGP2s5ALFPcX3bkYxRLlUeYK0BCp883
esc7gO6XPhLvTVqP0xgACRCdUwH2I0VTToDlHjXXZogyI/DuDX3gzWJufE3x1DGs
WNTMOp5n/uYkWH3rI3DkInmbSddEz3pgX65a8BuYtw0V/RSeSRnHKDYHMygvJBRL
EVfWRNeOIrZ730CyJry0t8ITjsZxiBDKXR5glNSwaIfQUfGkTSWi9YNSurNYkUDr
aMS2rgvOVlrOUDKTHUj9oS3jgoGWcDtlk9E1MeSoyIptbRoMhdFVl1AUJZsrMJU=
=Mfbu
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/stefanha/tags/block-pull-request' into staging
# gpg: Signature made Mon 03 Nov 2014 11:50:53 GMT using RSA key ID 81AB73C8
# gpg: Good signature from "Stefan Hajnoczi <stefanha@redhat.com>"
# gpg: aka "Stefan Hajnoczi <stefanha@gmail.com>"
* remotes/stefanha/tags/block-pull-request: (53 commits)
block: declare blockjobs and dataplane friends!
block: let commit blockjob run in BDS AioContext
block: let mirror blockjob run in BDS AioContext
block: let stream blockjob run in BDS AioContext
block: let backup blockjob run in BDS AioContext
block: add bdrv_drain()
blockjob: add block_job_defer_to_main_loop()
blockdev: add note that block_job_cb() must be thread-safe
blockdev: acquire AioContext in blockdev_mark_auto_del()
blockdev: acquire AioContext in do_qmp_query_block_jobs_one()
block: acquire AioContext in generic blockjob QMP commands
iotests: Expand test 061
block/qcow2: Simplify shared L2 handling in amend
block/qcow2: Make get_refcount() global
block/qcow2: Implement status CB for amend
qemu-img: Fix insignificant memleak
qemu-img: Add progress output for amend
block: Add status callback to bdrv_amend_options()
block: qemu-iotest 107 supports NFS
iotests: Add test for qcow2's bdrv_make_empty
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Cancel oversized requests early. They would generate
an iSCSI protocol error anyway; after having transferred
possibly a lot of data over the wire.
Suggested-By: Max Reitz <mreitz@redhat.com>
Signed-off-by: Peter Lieven <pl@kamp.de>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
As Max pointed out there is a hidden cast from int64_t to int for all
limits. So use the newly introduced sector_limits_lun2qemu for all
limits received from the target.
Signed-off-by: Peter Lieven <pl@kamp.de>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Copy the max_xfer_len from the BlockLimits VPD or use the
maximum value fitting in the CDB.
The helper function sector_limits_lun2qemu is introduced to convert
and cap the limits from the VPD to the maximum power of two fitting
in an integer; integer is the range for nb_sectors throughout
the block layer.
Signed-off-by: Peter Lieven <pl@kamp.de>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Before, when a write protected iSCSI target is attached as scsi-disk
with BDRV_O_RDWR, we report it as writable, while in fact all writes
will fail.
One way to improve this is to report write protect flag as true to
guest, but a even better way is to refuse using a write protected LUN to
guest.
Target write protect flag is checked with a mode sense query.
Signed-off-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
I'll use it with block backends shortly, and the name is going to fit
badly there. It's a block layer thing anyway, not just a block driver
thing.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
I'll use BlockDriverAIOCB with block backends shortly, and the name is
going to fit badly there. It's a block layer thing anyway, not just a
block driver thing.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Creating an anonymous BDS can't fail. Make that obvious.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Benoît Canet <benoit.canet@nodalink.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
yet 100% thread-safe, though, which makes it really, really
experimental. It also brings asynchronous cancellation to
the SCSI subsystem and implements it in virtio-scsi. This
is a pretty important feature. Almost all the work here
was done by Fam Zheng.
I also included the virtio refcount fixes from Gonglei,
because they had a small conflict with virtio-scsi dataplane.
This pull request is using the new subkey 4E6B09D7.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.22 (GNU/Linux)
iQEcBAABAgAGBQJUKpR2AAoJEBRUblpOawnXNLAH/RBeF66ZqWc29dl78JKEbv0+
C5pL61GhlI5vFIjSbPU3/iaZQifw3E4NLvX3SCN5ImsLzBw4r3qerapP2Ut96K/j
5CYdWTF1oqE32oCefvlWhJulHmE1vxGN53BvOz3HHxoehdF1/tJ0wUoZyfztGTOF
tiW85VMewi6CKm47/ns5tSNfGMVzWHqnUg67z/mwN6ZmPFU1dXBlgmiIv8Znahrn
B1AOAeMjWaKvOS+tiYNVG6k0GENWGoiypxiTR3ZXLQKxOYdkh/X0ARULqLMonASX
YsT772nzO9KZDIsdLj9QZZmM7vxs7UhW0MgQlvcSWP9vfZa5SeuRSgoXorPDj3Q=
=54T3
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/bonzini/tags/for-upstream' into staging
This update brings dataplane to virtio-scsi (NOT
yet 100% thread-safe, though, which makes it really, really
experimental. It also brings asynchronous cancellation to
the SCSI subsystem and implements it in virtio-scsi. This
is a pretty important feature. Almost all the work here
was done by Fam Zheng.
I also included the virtio refcount fixes from Gonglei,
because they had a small conflict with virtio-scsi dataplane.
This pull request is using the new subkey 4E6B09D7.
# gpg: Signature made Tue 30 Sep 2014 12:31:02 BST using RSA key ID 4E6B09D7
# gpg: Good signature from "Paolo Bonzini <pbonzini@redhat.com>"
# gpg: aka "Paolo Bonzini <bonzini@gnu.org>"
* remotes/bonzini/tags/for-upstream: (39 commits)
block/iscsi: handle failure on malloc of the allocationmap
util: introduce bitmap_try_new
virtio-scsi: Handle TMF request cancellation asynchronously
scsi: Introduce scsi_req_cancel_async
scsi: Introduce scsi_req_cancel_complete
scsi: Drop SCSIReqOps.cancel_io
scsi: Unify request unref in scsi_req_cancel
scsi-generic: Handle canceled request in scsi_command_complete
scsi: Drop scsi_req_abort
virtio-scsi: Process ".iothread" property
virtio-scsi: Call bdrv_io_plug/bdrv_io_unplug in cmd request handling
virtio-scsi: Batched prepare for cmd reqs
virtio-scsi: Two stages processing of cmd request
virtio-scsi: Add migration state notifier for dataplane code
virtio-scsi: Hook up with dataplane
virtio-scsi-dataplane: Code to run virtio-scsi on iothread
virtio-scsi: Add VirtIOSCSIVring in VirtIOSCSIReq
virtio-scsi: Add 'iothread' property to virtio-scsi
virtio: add a wrapper for virtio-backend initialization
virtio-9p: fix virtio-9p child refcount in transports
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
iscsi_aio_write16_cb, iscsi_aio_writev, iscsi_aio_read16_cb, and
iscsi_aio_readv have not not been in use since commit
063c3378a9 ("block/iscsi: introduce
bdrv_co_{readv, writev, flush_to_disk}").
These were the only trace events in block/iscsi.c so drop the the
trace.h include.
Cc: Peter Lieven <pl@kamp.de>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-id: 1411394595-15300-4-git-send-email-stefanha@redhat.com
Currently the file size requested by user is rounded down to nearest
sector, causing the actual file size could be a bit less than the size
user requested. Since some formats (like qcow2) record virtual disk
size in bytes, this can make the last few bytes cannot be accessed.
This patch fixes it by rounding up file size to nearest sector so that
the actual file size is no less than the requested file size.
Signed-off-by: Hu Tao <hutao@cn.fujitsu.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
bs->total_sectors is not yet updated at this point. resulting
in memory corruption if the volume has grown and data is written
to the newly availble areas.
CC: qemu-stable@nongnu.org
Signed-off-by: Peter Lieven <pl@kamp.de>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
g_new(T, n) is neater than g_malloc(sizeof(T) * n). It's also safer,
for two reasons. One, it catches multiplication overflowing size_t.
Two, it returns T * rather than void *, which lets the compiler catch
more type errors.
Patch created with Coccinelle, with two manual changes on top:
* Add const to bdrv_iterate_format() to keep the types straight
* Convert the allocation in bdrv_drop_intermediate(), which Coccinelle
inexplicably misses
Coccinelle semantic patch:
@@
type T;
@@
-g_malloc(sizeof(T))
+g_new(T, 1)
@@
type T;
@@
-g_try_malloc(sizeof(T))
+g_try_new(T, 1)
@@
type T;
@@
-g_malloc0(sizeof(T))
+g_new0(T, 1)
@@
type T;
@@
-g_try_malloc0(sizeof(T))
+g_try_new0(T, 1)
@@
type T;
expression n;
@@
-g_malloc(sizeof(T) * (n))
+g_new(T, n)
@@
type T;
expression n;
@@
-g_try_malloc(sizeof(T) * (n))
+g_try_new(T, n)
@@
type T;
expression n;
@@
-g_malloc0(sizeof(T) * (n))
+g_new0(T, n)
@@
type T;
expression n;
@@
-g_try_malloc0(sizeof(T) * (n))
+g_try_new0(T, n)
@@
type T;
expression p, n;
@@
-g_realloc(p, sizeof(T) * (n))
+g_renew(T, p, n)
@@
type T;
expression p, n;
@@
-g_try_realloc(p, sizeof(T) * (n))
+g_try_renew(T, p, n)
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Jeff Cody <jcody@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Some code in the block layer makes potentially huge allocations. Failure
is not completely unexpected there, so avoid aborting qemu and handle
out-of-memory situations gracefully.
This patch addresses the allocations in the iscsi block driver.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Benoit Canet <benoit@irqsave.net>
Reviewed-by: Eric Blake <eblake@redhat.com>
during rebasing the changed init value for the
retry counter was missed. This resulted in no retries
being performed at all.
Signed-off-by: Peter Lieven <pl@kamp.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This patch lifts the minimum supported libiscsi version from 1.4.0 to
1.9.0 since the BUSY patch required that change.
On one this allows us to remove all #ifdefs from the code which
makes the code easier to maintain and read. On the other hand
I would not recommend libiscsi prior to 1.8.0 for production use
because the following important libiscsi fixes for deadlocks and
protocol errors are missing prior to 1.8.0:
dbe9a1e SOCKET queue cmd PDUs directly in waitpdu queue
30df192 DATA-OUT set pdu->cmdsn appropriately
548bd22 ISCSI fix broken send logic in iscsi_scsi_async_command
14bee10 RECONNECT do not increase CmdSN for immediate PDUs
1f4a66a PDU queue out PDUs in order of itt.
562dd46 PDU avoid incrementing itt to 0xffffffff
cd09c0f PDU use serial32 arithmetic for cmdsn, maxcmdsn and expcmdsn.
89e918e SOCKET validate data_size in in_pdu header
91267f5 Limit immediate and unsolicited data to FirstBurstLength
Note that libiscsi 1.9.0 was released on Feb 24th, 2013, about
one month after 1.8.0.
Signed-off-by: Peter Lieven <pl@kamp.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
this patch changes the driver to uses 16 Byte CDBs for
READ/WRITE only if the target requires 64bit lba addressing.
On one hand this saves 6 bytes in each PDU on the other
hand it seems that 10 Byte CDBs seems to be much better
supported and tested as a recent issue I had with a
major storage supplier lined out.
For WRITESAME the logic is a bit more tricky as WRITESAME10
with UNMAP was added really late. Thus a fallback to WRITESAME16
is possible if it supports UNMAP and WRITESAME10 not.
Signed-off-by: Peter Lieven <pl@kamp.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
it might happen in the future that a function directly invokes its callback.
In this case we end up in a segfault because the iTask is gone when the BH
is scheduled.
Signed-off-by: Peter Lieven <pl@kamp.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
this patch adds handling of BUSY status reponse from an iSCSI target.
Currently, we fail with -EIO in case of SCSI_STATUS_BUSY while the
obvious reaction would be to retry the operation after some time.
The retry time is randomly choosen from a range with exponential
growth increasing with each retry.
This patch includes most of the changes by a an upcoming patch
from Stefan Hajnoczi:
iscsi: implement .bdrv_detach/attach_aio_context()
because I also need the reference to the aio_context for
the retry timer to work. I included the changes to maintain
better mergeability.
Signed-off-by: Peter Lieven <pl@kamp.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Now that all backend drivers are using QemuOpts, remove all
QEMUOptionParameter related codes.
Signed-off-by: Dong Xu Wang <wdongxu@linux.vnet.ibm.com>
Signed-off-by: Chunyan Liu <cyliu@suse.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Dong Xu Wang <wdongxu@linux.vnet.ibm.com>
Signed-off-by: Chunyan Liu <cyliu@suse.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Drop the assumption that we're using the main AioContext for Linux
AIO. Convert qemu_aio_set_fd_handler() to aio_set_fd_handler() and
timer_new_ms() to aio_timer_new().
The .bdrv_detach/attach_aio_context() interfaces also need to be
implemented to move the fd and timer from the old to the new AioContext.
Cc: Peter Lieven <pl@kamp.de>
Cc: Ronnie Sahlberg <ronniesahlberg@gmail.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Peter Lieven <pl@kamp.de>
* remotes/bonzini/scsi-next:
megasas: remove buildtime strings
block: iscsi build fix if LIBISCSI_FEATURE_IOVECTOR is not defined
virtio-scsi: Plug memory leak on virtio_scsi_push_event() error path
scsi: Document intentional fall through in scsi_req_length()
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Commit b03c380 introduced the function
iscsi_allocationmap_is_allocated(), however it is only used within a
code block that is conditionally compiled. This produces a warning
(error with -werror) of "defined but not used" for the the function, if
LIBISCSI_FEATURE_IOVECTOR is not defined.
This wraps iscsi_allocationmap_is_allocated() in the same conditional.
Signed-off-by: Jeff Cody <jcody@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
* remotes/bonzini/scsi-next:
[PATCH] block/iscsi: bump year in copyright notice
block/iscsi: allow cluster_size of 4K and greater
block/iscsi: clarify the meaning of ISCSI_CHECKALLOC_THRES
block/iscsi: speed up read for unallocated sectors
block/iscsi: allow fall back to WRITE SAME without UNMAP
MAINTAINERS: mark megasas as maintained
megasas: Add MSI support
megasas: Enable MSI-X support
megasas: Implement LD_LIST_QUERY
scsi: Improve error messages more
scsi-disk: Improve error messager if can't get version number
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
depending on the target the opt_unmap_gran might be as low
as 4K. As we know use this also as a knob to activate the allocationmap
feature lower the barrier. The limit 4K (and not 512) is choosen
to avoid a potentially too big allocationmap.
Signed-off-by: Peter Lieven <pl@kamp.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
this patch implements a cache that tracks if a page on the
iscsi target is allocated or not. The cache is implemented in
a way that it allows for false positives
(e.g. pretending a page is allocated, but it isn't), but
no false negatives.
The cached allocation info is then used to speed up the
read process for unallocated sectors by issueing a GET_LBA_STATUS
request for all sectors that are not yet known to be allocated.
If the read request is confirmed to fall into an unallocated
range we directly return zeroes and do not transfer the
data over the wire.
Tests have shown that a relatively small amount of GET_LBA_STATUS
requests happens a vServer boot time to fill the allocation cache
(all those blocks are not queried again).
Not to transfer all the data of unallocated sectors saves a lot
of time, bandwidth and storage I/O load during block jobs or storage
migration and it saves a lot of bandwidth as well for any big sequential
read of the whole disk (e.g. block copy or speed tests) if a significant
number of blocks is unallocated.
Signed-off-by: Peter Lieven <pl@kamp.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
if the iscsi driver receives a write zeroes request with
the BDRV_REQ_MAY_UNMAP flag set it fails with -ENOTSUP
if the iscsi target does not support WRITE SAME with
UNMAP. However, the BDRV_REQ_MAY_UNMAP is only a hint
and writing zeroes with WRITE SAME will still be
better than falling back to writing zeroes with WRITE16.
Signed-off-by: Peter Lieven <pl@kamp.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Using error_is_set(errp) that way can sweep programming errors under
the carpet when we get called incorrectly with an error set.
Commit 24d3bd6 added a broken error path to iscsi_do_inquiry(): it
first calls error_setg(), then jumps to the preexisting error label,
where error_setg() gets called again, triggering an assertion failure.
Commit cbee81f fixed this by guarding the second error_setg() with an
error_is_set().
Replace this fix by a simpler and safer one: jump right behind the
second error_setg().
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
