We check whether the passed in timer id is negative on all calls
that involve g_posix_timers.
However, these checks are bogus. First off we limit the timer_id to
16 bits which is not what Linux does. Then we check whether it's negative
which it can't be because we masked it.
We can safely remove the masking. For the negativity check we can just
treat the timerid as unsigned and only check for upper boundaries.
Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
The blkpg ioctl can take different payloads depending on the opcode in
its payload structure. Create a new special ioctl handler that can only
deal with partition style ones for now.
This patch fixes running parted for me.
Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
We have support for the epoll_pwait syscall, but it wasn't enabled for
ARM guests because we hadn't defined the syscall number; correct this
deficiency.
Reported-by: Dave Flogeras <dflogeras2@gmail.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
The current implementation of watchpoints requires that they
have a power of 2 length which is not greater than TARGET_PAGE_SIZE
and that their address is a multiple of their length. Watchpoints
on ARM don't fit these restrictions, so change the implementation
so they can be relaxed.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Function pointers in the 64-bit ELFv2 PowerPC ABI are actual (internal)
entry point addresses. However, when invoking a function via a function
pointer, GPR 12 must also be set to this address so that the TOC may be
handled properly.
Add this support to the invocation of a signal handler.
Signed-off-by: Tom Musta <tommusta@gmail.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
Eliminate the stub for the do_setcontext() function for TARGET_PPC64. The
implementation re-uses the existing TARGET_PPC32 code with the only change
being the computation of the address of the register save area.
Signed-off-by: Tom Musta <tommusta@gmail.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
Properly dereference 64-bit PPC ELF V1 ABIT function pointers to signal handlers.
On this platform, function pointers are pointers to structures and the first 64
bits of such a structure contains the function's entry point. The second 64 bits
contains the TOC pointer, which must be placed into GPR 2.
Signed-off-by: Tom Musta <tommusta@gmail.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
Enable the 64-bit PowerPC signal handling code that was previously
disabled via #ifdefs. Specifically:
- Move the target_mcontext (register save area) structure and
append it to the 64-bit target_sigcontext structure. This
provides the space on the stack for saving and restoring
context.
- Define the target_rt_sigframe for 64-bit.
- Adjust the setup_frame and setup_rt_frame routines to properly
select the target_mcontext area and trampoline within the stack
frame; tthis is different for 32-bit and 64-bit implementations.
- Adjust the do_setcontext stub for 64-bit so that it compiles
without warnings.
The 64-bit signal handling code is still not functional after this
change; but the 32-bit code is. Subsequent changes will address
specific issues with the 64-bit code.
Signed-off-by: Tom Musta <tommusta@gmail.com>
[agraf: fix build on 32bit hosts, ppc64abi32]
Signed-off-by: Alexander Graf <agraf@suse.de>
Split the encoding of the PowerPC sigreturn trampoline from the saving of
register state onto the signal handler stack. This will make it easier
in subsequent patches to deal with variations in the stack frame layouts between
32 and 64 bit PowerPC.
Signed-off-by: Tom Musta <tommusta@gmail.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
The code that sets the stack frame back pointer is incorrect for
the setup_rt_frame() code; qemu will abort (SIGSEGV) in some
environments. The setup_frame code was fixed in commit
beb526b121 but the setup_rt_frame
code was not.
Make the setup_rt_frame code consistent with the setup_frame
code.
Signed-off-by: Tom Musta <tommusta@gmail.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
Handle variable "fd_orig" going out of scope leaks the handle.
Signed-off-by: zhanghailiang <zhang.zhanghailiang@huawei.com>
Reviewed-by: Gonglei <arei.gonglei@huawei.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Although not technically not required by POSIX, the writev system call will
typically write out its buffers individually. That is, if the first buffer
is written successfully, but the second buffer pointer is invalid, then
the first chuck will be written and its size is returned.
Signed-off-by: Tom Musta <tommusta@gmail.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
The argument to the mlockall system call is not necessarily the same on
all platforms and thus may require translation prior to passing to the
host.
For example, PowerPC 64 bit platforms define values for MCL_CURRENT
(0x2000) and MCL_FUTURE (0x4000) which are different from Intel platforms
(0x1 and 0x2, respectively)
Signed-off-by: Tom Musta <tommusta@gmail.com>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
The clock_nanosleep syscall is unusual in that it returns positive
numbers in error handling situations, versus returning -1 and setting
errno, or returning a negative errno value. On POWER, the kernel will
set the SO bit of CR0 to indicate failure in a syscall. QEMU has
generic handling to do this for syscalls with standard return values.
Add special case code for clock_nanosleep to handle CR0 properly.
Signed-off-by: Tom Musta <tommusta@gmail.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
The ELF V2 ABI for PPC64 defines MINSIGSTKSZ as 4096 bytes whereas it was
2048 previously.
Signed-off-by: Tom Musta <tommusta@gmail.com>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
The get_ppc64_abi is used to determine the ELF ABI (i.e. V1 or V2). This
routine is currently implemented in the linux-user/elfload.c file but
is useful in other scenarios. Move the routine to a more generally
available location (linux-user/ppc/target_cpu.h).
Signed-off-by: Tom Musta <tommusta@gmail.com>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
Properly detect a fault when attempting to store into an invalid
struct timespec pointer.
Signed-off-by: Tom Musta <tommusta@gmail.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
The sched_getparam, sched_setparam and sched_setscheduler system
calls take a pointer argument to a sched_param structure. When
this pointer is null, errno should be set to EINVAL.
Signed-off-by: Tom Musta <tommusta@gmail.com>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
The msgsnd system call takes an argument that describes the message
size (msgsz) and is of type size_t. The system call should set
errno to EINVAL in the event that a negative message size is passed.
Signed-off-by: Tom Musta <tommusta@gmail.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
The mq_open system call takes an optional struct mq_attr pointer
argument in the fourth position. This pointer is used when O_CREAT
is specified in the flags (second) argument. It may be NULL, in
which case the queue is created with implementation defined attributes.
Change the code to properly handle the case when NULL is passed in the
arg4 position.
Signed-off-by: Tom Musta <tommusta@gmail.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
For those target ABIs that use the ipc system call (e.g. POWER),
the third argument is used in the shmat path as a pointer. It
therefore must be declared as an abi_long (versus int) so that
the address bits are not lost in truncation. In fact, all arguments
to do_ipc should be declared as abit_long.
In fact, it makes more sense for all of the arguments to be declaried
as abi_long (except call).
Signed-off-by: Tom Musta <tommusta@gmail.com>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
The semun union used in the semctl system call contains both an int (val) and
pointers. In cross-endian situations on 64 bit targets, the value passed to
semctl is an 8 byte (abi_long) value and thus does not have the 4-byte val
field in the correct location. In order to rectify this, the other half
of the union must be accessed. This is achieved in code by performing
a byte swap on the entire 8 byte union, followed by a 4-byte swap of the
first half.
Also, eliminate an extraneous (dead) line of code that sets target_su.val in
the IPC_SET/IPC_GET case.
Signed-off-by: Tom Musta <tommusta@gmail.com>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
When the ipc system call is used to wrap a semctl system call,
the ptr argument to ipc needs to be dereferenced prior to passing
it to the semctl handler. This is because the fourth argument to
semctl is a union and not a pointer to a union.
Signed-off-by: Tom Musta <tommusta@gmail.com>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
The 64 bit PowerPC platforms eliminate the _unused1 and _unused2
elements of the semid_ds structure from <sys/sem.h>. So eliminate
these from the target_semid_ds structure.
Signed-off-by: Tom Musta <tommusta@gmail.com>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
Add support for the setns and unshare syscalls, trivially passed through to
the host. Based on patches by Paul Burton, added configure check.
Signed-off-by: Paul Burton <paul@archlinuxmips.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
Add support for the ioprio_get & ioprio_set syscalls, allowing their
use by target programs.
Signed-off-by: Paul Burton <paul@archlinuxmips.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
Adds support for the timerfd_create, timerfd_gettime & timerfd_settime
syscalls, allowing use of timerfds by target programs.
v2: By Riku - added configure check for timerfd and ifdefs
for benefit of old distributions like RHEL5.
Signed-off-by: Paul Burton <paul@archlinuxmips.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
The current code always returns the length of the path when it should
be returning the number of bytes it wrote to the output string.
Further, readlink is not supposed to append a NUL byte, but the current
snprintf logic will always do just that.
Even further, if you pass in a length of 0, you're suppoesd to get back
an error (EINVAL), but the current logic just returns 0.
Further still, if there was an error reading the symlink, we should not
go ahead and try to read the target buffer as it is garbage.
Simple test for the first two issues:
$ cat test.c
int main() {
char buf[50];
size_t len;
for (len = 0; len < 10; ++len) {
memset(buf, '!', sizeof(buf));
ssize_t ret = readlink("/proc/self/exe", buf, len);
buf[20] = '\0';
printf("readlink(/proc/self/exe, {%s}, %zu) = %zi\n", buf, len, ret);
}
return 0;
}
Now compare the output of the native:
$ gcc test.c -o /tmp/x
$ /tmp/x
$ strace /tmp/x
With what qemu does:
$ armv7a-cros-linux-gnueabi-gcc test.c -o /tmp/x -static
$ qemu-arm /tmp/x
$ qemu-arm -strace /tmp/x
Signed-off-by: Mike Frysinger <vapier@chromium.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
There were a number of bugs in the conversion of the sigevent
argument to timer_create from target to host format:
* signal number not converted from target to host
* thread ID not copied across
* sigev_value not copied across
* we never unlocked the struct when we were done
Between them, these problems meant that SIGEV_THREAD_ID
timers (and the glibc-implemented SIGEV_THREAD timers which
depend on them) didn't work.
Fix these problems and clean up the code a little by pulling
the struct conversion out into its own function, in line with
how we convert various other structs. This allows the test
program in bug LP:1042388 to run.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
Currently syscall instruction is buggy on user mode X86_64,
the EIP is updated after do_syscall(), that is too late for
clone(). Because clone() will create a thread at the env->EIP
(the address of syscall insn), and then child thread enters
do_syscall() again, that is not expected. Sometimes it is tragic.
User mode syscall insn emulation is not used MSR, so the
action should be same to INT 0x80. INT 0x80 will update EIP in
do_interrupt(), ditto for syscall() for consistency.
Signed-off-by: Jincheng Miao <jmiao@redhat.com>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
While Mikhail fixed /proc/self/maps, it was noticed openat calls are
not redirected currently. Some archs don't have open at all, so
openat needs to be redirected.
Fix this by consolidating open/openat code to do_openat - open
is implemented using openat(AT_FDCWD, ... ), which according
to open(2) man page is identical.
Since all targets now have openat, remove the ifdef around sys_openat
and openat: case in do_syscall.
Cc: Mikhail Ilin <m.ilin@samsung.com>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
Build /proc/self/maps doing a match against guest memory translation table.
Output only that map records which are valid for guest memory layout.
Signed-off-by: Mikhail Ilyin <m.ilin@samsung.com>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
As reported by Laurent, which should use TARGET_SA_ONSTACK
on arm, microblaze and openrisc targets like we do on all
others. Practical matter is minimal as for almost all archs
SA_ONSTACK is 0x08000000:
http://lxr.free-electrons.com/ident?i=SA_ONSTACK
Reported-by: Laurent Desnogues <laurent.desnogues@gmail.com>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
target_to_host_sockaddr() may increase the lenth with 1 byte
for AF_UNIX sockets so allocate 1 extra byte.
Signed-off-by: Joakim Tjernlund <Joakim.Tjernlund@transmode.se>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
Wrong type was used in ioctl definition.
Signed-off-by: Joakim Tjernlund <Joakim.Tjernlund@transmode.se>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
The default, 970fx, doesn't support MSR_LE. So even though we set LE in
ppc_cpu_reset, it gets cleared again in hreg_store_msr. Error out if a
user-selected cpu model doesn't support LE.
Signed-off-by: Richard Henderson <rth@twiddle.net>
[agraf: switch to POWER7 as default for BE and LE]
Signed-off-by: Alexander Graf <agraf@suse.de>
* remotes/riku/linux-user-for-upstream:
linux-user: support the SIOCGIFINDEX ioctl
linux-user: support the KDSIGACCEPT ioctl
linux-user: allow NULL tv argument for settimeofday
linux-user: respect timezone for settimeofday
linux-user: fix struct target_epoll_event layout for MIPS
linux-user: support strace of epoll_create1
linux-user: allow NULL arguments to mount
linux-user: support SO_PASSSEC setsockopt option
linux-user: support SO_{SND, RCV}BUFFORCE setsockopt options
linux-user: support SO_ACCEPTCONN getsockopt option
linux-user: translate the result of getsockopt SO_TYPE
linux-user: added fake open() for /proc/self/cmdline
Add support for MAP_NORESERVE mmap flag.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Add a definition of the SIOCGIFINDEX ioctl, allowing its use by target
programs.
Signed-off-by: Paul Burton <paul@archlinuxmips.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
Add a definition of the KDSIGACCEPT ioctl & allow its use by target
programs.
Signed-off-by: Paul Burton <paul@archlinuxmips.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
The tv argument to the settimeofday syscall is allowed to be NULL, if
the program only wishes to provide the timezone. QEMU previously
returned -EFAULT when tv was NULL. Instead, execute the syscall &
provide NULL to the kernel as the target program expected.
Signed-off-by: Paul Burton <paul@archlinuxmips.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
The settimeofday syscall accepts a tz argument indicating the desired
timezone to the kernel. QEMU previously ignored any argument provided
by the target program & always passed NULL to the kernel. Instead,
translate the argument & pass along the data userland provided.
Although this argument is described by the settimeofday man page as
obsolete, it is used by systemd as of version 213.
Signed-off-by: Paul Burton <paul@archlinuxmips.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
MIPS requires the pad field to 64b-align the data field just as ARM
does.
Signed-off-by: Paul Burton <paul@archlinuxmips.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
Add the epoll_create1 syscall to strace.list in order to display that
syscall when it occurs, rather than a message about the syscall being
unknown despite QEMU already implementing support for it.
Signed-off-by: Paul Burton <paul@archlinuxmips.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
Calls to the mount syscall can legitimately provide NULL as the value
for the source of filesystemtype arguments, which QEMU would previously
reject & return -EFAULT to the target program. An example of this is
remounting an already mounted filesystem with different properties.
Instead of rejecting such syscalls with -EFAULT, pass NULL along to the
kernel as the target program expects.
Additionally this patch fixes a potential memory leak when DEBUG_REMAP
is enabled and lock_user_string fails on the target or filesystemtype
arguments but a prior argument was non-NULL and already locked.
Since the patch already touched most lines of the TARGET_NR_mount case,
it fixes the indentation & coding style for good measure.
Signed-off-by: Paul Burton <paul@archlinuxmips.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
Translate the SO_PASSSEC option to setsockopt to the host value &
perform the syscall as expected, allowing use of the option by target
programs.
Signed-off-by: Paul Burton <paul@archlinuxmips.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
Translate the SO_SNDBUFFORCE & SO_RCVBUFFORCE options to setsockopt to
the host values & perform the syscall as expected, allowing use of those
options by target programs.
Signed-off-by: Paul Burton <paul@archlinuxmips.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
Translate the SO_ACCEPTCONN option to the host value & execute the
syscall as expected.
Signed-off-by: Paul Burton <paul@archlinuxmips.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
