x86_cpudef_init() doesn't do anything anymore, cpudef_init(),
cpudef_setup(), and x86_cpudef_init() can be finally removed.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
exec-all.h contains TCG-specific definitions. It is not needed outside
TCG-specific files such as translate.c, exec.c or *helper.c.
One generic function had snuck into include/exec/exec-all.h; move it to
include/qom/cpu.h.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This decouples logging further from config-target.h
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The new-in-ARMv8 YIELD instruction has been implemented to throw
an EXCP_YIELD back up to the QEMU main loop. In system emulation
we use this to decide to schedule a different guest CPU in SMP
configurations. In usermode emulation there is nothing to do,
so just ignore it and resume the guest.
This prevents an abort with "unhandled CPU exception 0x10004"
if the guest process uses the YIELD instruction.
Reported-by: Hunter Laux <hunterlaux@gmail.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1456833171-31900-1-git-send-email-peter.maydell@linaro.org
Move declarations out of qemu-common.h for functions declared in
utils/ files: e.g. include/qemu/path.h for utils/path.c.
Move inline functions out of qemu-common.h and into new files (e.g.
include/qemu/bcd.h)
Signed-off-by: Veronia Bahaa <veroniabahaa@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The windows socket functions look identical to the normal POSIX
sockets functions, but instead of setting errno, the caller needs
to call WSAGetLastError(). QEMU has tried to deal with this
incompatibility by defining a socket_error() method that callers
must use that abstracts the difference between WSAGetLastError()
and errno.
This approach is somewhat error prone though - many callers of
the sockets functions are just using errno directly because it
is easy to forget the need use a QEMU specific wrapper. It is
not always immediately obvious that a particular function will
in fact call into Windows sockets functions, so the dev may not
even realize they need to use socket_error().
This introduces an alternative approach to portability inspired
by the way GNULIB fixes portability problems. We use a macro to
redefine the original socket function names to refer to a QEMU
wrapper function. The wrapper function calls the original Win32
sockets method and then sets errno from the WSAGetLastError()
value.
Thus all code can simply call the normal POSIX sockets APIs are
have standard errno reporting on error, even on Windows. This
makes the socket_error() method obsolete.
We also bring closesocket & ioctlsocket into this approach. Even
though they are non-standard Win32 names, we can't wrap the normal
close/ioctl methods since there's no reliable way to distinguish
between a file descriptor and HANDLE in Win32.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Now that CPSR.E is set correctly, prepare for when setend will be able
to change it; bswap data in and out of strex manually by comparing
SCTLR.B, CPSR.E and TARGET_WORDS_BIGENDIAN (we do not have the luxury
of using TCGMemOps).
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
[ PC changes:
* Moved SCTLR/CPSR logic to arm_cpu_data_is_big_endian
]
Signed-off-by: Peter Crosthwaite <crosthwaite.peter@gmail.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
If doing big-endian linux-user mode, set both the CPSR.E and SCTLR.E0E
bits. This sets big-endian mode for data accesses.
Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
bswap_code is a CPU property of sorts ("is the iside endianness the
opposite way round to TARGET_WORDS_BIGENDIAN?") but it is not the
actual CPU state involved here which is SCTLR.B (set for BE32
binaries, clear for BE8).
Replace bswap_code with SCTLR.B, and pass that to arm_ld*_code.
The next patches will make data fetches honor both SCTLR.B and
CPSR.E appropriately.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
[PC changes:
* rebased on master (Jan 2016)
* s/TARGET_USER_ONLY/CONFIG_USER_ONLY
* Use bswap_code() for disas_set_info() instead of raw sctlr_b
]
Signed-off-by: Peter Crosthwaite <crosthwaite.peter@gmail.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This matches the idiom used by get_user_data_* later in the series,
and will help when bswap_code will be replaced by SCTLR.B.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Peter Crosthwaite <crosthwaite.peter@gmail.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Peter Crosthwaite <crosthwaite.peter@gmail.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
When linux-user code is calling cpsr_write(), use a restrictive
mask to ensure we are limiting the set of CPSR bits we update.
In particular, don't allow the mode bits to be changed.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Sergey Fedorov <serge.fdrv@gmail.com>
Message-id: 1455556977-3644-5-git-send-email-peter.maydell@linaro.org
Add an argument to cpsr_write() to indicate what kind of CPSR
write is being requested, since the exact behaviour should
differ for the different cases.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Sergey Fedorov <serge.fdrv@gmail.com>
Message-id: 1455556977-3644-3-git-send-email-peter.maydell@linaro.org
getrandom() has been introduced in kernel 3.17 and is now used during
the boot sequence of Debian unstable (stretch/sid).
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
x86, m68k, ppc, sh4 and sparc failed to enable timerfd, because they
didn't have timerfd_create system call defined. Instead QEMU
defined timerfd syscall. Checking with kernel sources, it appears
kernel developers reused timerfd syscall number with timerfd_create,
presumably since no userspace called the old syscall number.
Reported-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
QEMU lists deprecated system call numbers in for Aarch64. These
are never enabled for Linux kernel, so don't define them in Qemu
either. Remove the ifdef around host_to_target_stat64 since
all architectures need it now.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
Sync syscall numbers to match the linux v4.5-rc1 kernel.
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
Our implementation of shmat() and shmdt() for linux-user was
using "zero guest address" as its marker for "entry in the
shm_regions[] array is not in use". This meant that if the
guest did a shmdt(0) we would match on an unused array entry
and call page_set_flags() with both start and end addresses zero,
which causes an assertion failure.
Use an explicit in_use flag to manage the shm_regions[] array,
so that we avoid this problem.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reported-by: Pavel Shamis <pasharesearch@gmail.com>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
Set the default to the latest CPU version to have the
largest set of available features.
It is also really needed in little-endian mode because
POWER7 is not really supported in this mode and some distros
(at least debian) generate POWER8 code for their ppc64le target.
Fixes: https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=813698
Signed-off-by: Laurent Vivier <lvivier@redhat.com>
Reviewed-by: Alexander Graf <agraf@suse.de>
Reviewed-by: Michael Tokarev <mjt@tls.msk.ru>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
This fixes double-definitions in linux-user builds when using the UST
tracing backend (which indirectly includes the system's "syscall.h").
Signed-off-by: Lluís Vilanova <vilanova@ac.upc.edu>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
target_fd_trans is an array of "TargetFdTrans *": compute size
accordingly. Use g_renew() as proposed by Paolo.
Reported-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
Clean up includes so that osdep.h is included first and headers
which it implies are not included manually.
This commit was created with scripts/clean-includes.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Eric Blake <eblake@redhat.com>
Split the bits that require it to exec/log.h.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Denis V. Lunev <den@openvz.org>
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Message-id: 1452174932-28657-8-git-send-email-den@openvz.org
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Clean up includes so that osdep.h is included first and headers
which it implies are not included manually.
This commit was created with scripts/clean-includes.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1453832250-766-10-git-send-email-peter.maydell@linaro.org
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=WeIo
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/riku/tags/pull-linux-user-20160111' into staging
January 2016 Linux-user queque
# gpg: Signature made Mon 11 Jan 2016 14:13:57 GMT using RSA key ID DE3C9BC0
# gpg: Good signature from "Riku Voipio <riku.voipio@iki.fi>"
# gpg: aka "Riku Voipio <riku.voipio@linaro.org>"
* remotes/riku/tags/pull-linux-user-20160111:
linux-user/mmap.c: Use end instead of real_end in target_mmap
linux-user: Add SOCKOP_sendmmsg and SOCKOP_recvmmsg socket call, wire them up.
linux-user: Update m68k syscall definitions to match Linux 4.4.
linux-user/syscall.c: Use SOL_SOCKET instead of level for setsockopt()
linux-user: enable sigaltstack for all architectures
unicore32: convert get_sp_from_cpustate from macro to inline
linux-user/mmap.c: Always zero MAP_ANONYMOUS memory in mmap_frag()
linux-user,sh4: fix signal retcode address
linux-user: check fd is >= 0 in fd_trans_host_to_target_data/fd_trans_host_to_target_addr
linux-user: manage bind with a socket of SOCK_PACKET type.
linux-user: add a function hook to translate sockaddr
linux-user: rename TargetFdFunc to TargetFdDataFunc, and structure fields accordingly
linux-user: SOCK_PACKET uses network endian to encode protocol in socket()
linux-user/syscall.c: malloc()/calloc() to g_malloc()/g_try_malloc()/g_new0()
linux-user: in poll(), if nfds is 0, pfd can be NULL
linux-user: correctly align target_epoll_event
linux-user: add signalfd/signalfd4 syscalls
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The fragment must effectively be mapped only to "end" not to "real_end"
(which is a host page aligned address, and thus this is not a fragment).
It is consistent with what it is done in the case of one single page.
Signed-off-by: Chen Gang <gang.chen.5i5j@gmail.com>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
Adds the definitions for the socket calls SOCKOP_sendmmsg
and SOCKOP_recvmmsg and wires them up with the rest of the code.
The necessary function do_sendrecvmmsg() is already present in
linux-user/syscall.c. After adding these two definitions and wiring
them up, I no longer receive an error message about the
unimplemented socket calls when running "apt-get update" on Debian
unstable running on qemu with glibc_2.21 on m68k.
Signed-off-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
Signed-off-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
In this case, level is TARGET_SOL_SOCKET, but we need SOL_SOCKET for
setsockopt().
Signed-off-by: Chen Gang <gang.chen.5i5j@gmail.com>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
This change covers arm, aarch64, mips. Others to follow?
The change was prompted by QEMU warning about a syscall 384 (get_random())
with Debian armhf binaries (ARMv7).
Signed-off-by: Johan Ouwerkerk <jm.ouwerkerk@gmail.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
There is no reason to limit sigaltstack syscall to just a few
architectures and pretend it is not implemented for others.
If some architecture is not ready for this, that architecture
should be fixed instead.
This fixes LP#1516408.
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
All other architectures define get_sp_from_cpustate as an inline function,
only unicore32 uses a #define. With this, some usages are impossible, for
example, enabling sigaltstack in linux-user/syscall.c results in
linux-user/syscall.c: In function ‘do_syscall’:
linux-user/syscall.c:8299:39: error: dereferencing ‘void *’ pointer [-Werror]
get_sp_from_cpustate(arg1, arg2, get_sp_from_cpustate((CPUArchState *)cpu_env));
^
linux-user/syscall.c:8299:39: error: request for member ‘regs’ in something not a structure or union
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
There is no reason to limit sigaltstack syscall to just a few
architectures and pretend it is not implemented for others.
If some architecture is not ready for this, that architecture
should be fixed instead.
This fixes LP#1516408.
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
All other architectures define get_sp_from_cpustate as an inline function,
only unicore32 uses a #define. With this, some usages are impossible, for
example, enabling sigaltstack in linux-user/syscall.c results in
linux-user/syscall.c: In function ‘do_syscall’:
linux-user/syscall.c:8299:39: error: dereferencing ‘void *’ pointer [-Werror]
get_sp_from_cpustate(arg1, arg2, get_sp_from_cpustate((CPUArchState *)cpu_env));
^
linux-user/syscall.c:8299:39: error: request for member ‘regs’ in something not a structure or union
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
When mapping MAP_ANONYMOUS memory fragments, still need notice about to
set it zero, or it will cause issues.
Signed-off-by: Chen Gang <gang.chen.5i5j@gmail.com>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
To return from a signal, setup_frame() puts an instruction to
be executed in the stack. This sequence calls the syscall sigreturn().
The address of the instruction must be set in the PR register
to be executed.
This patch fixes this: the current code sets the register to the address
of the instruction in the host address space (which can be 64bit whereas
PR is only 32bit), but the virtual CPU can't access this address space,
so we put in PR the address of the instruction in the guest address space.
This patch also removes an useless variable (ret) in the modified functions.
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
This is obsolete, but if we want to use dhcp with an old distro (like debian
etch), we need it. Some users (like dhclient) use SOCK_PACKET with AF_PACKET
and the kernel allows that.
packet(7)
In Linux 2.0, the only way to get a packet socket was by calling
socket(AF_INET, SOCK_PACKET, protocol). This is still supported but
strongly deprecated. The main difference between the two methods is
that SOCK_PACKET uses the old struct sockaddr_pkt to specify an inter‐
face, which doesn't provide physical layer independence.
struct sockaddr_pkt {
unsigned short spkt_family;
unsigned char spkt_device[14];
unsigned short spkt_protocol;
};
spkt_family contains the device type, spkt_protocol is the IEEE 802.3
protocol type as defined in <sys/if_ether.h> and spkt_device is the
device name as a null-terminated string, for example, eth0.
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
in PACKET(7) :
packet_socket = socket(AF_PACKET, int socket_type, int protocol);
[...]
protocol is the IEEE 802.3 protocol
number in network order. See the <linux/if_ether.h> include file for a
list of allowed protocols. When protocol is set to htons(ETH_P_ALL)
then all protocols are received. All incoming packets of that protocol
type will be passed to the packet socket before they are passed to the
protocols implemented in the kernel.
[...]
Compatibility
In Linux 2.0, the only way to get a packet socket was by calling
socket(AF_INET, SOCK_PACKET, protocol).
We need to tswap16() the protocol because on big-endian, the ABI is
waiting for, for instance for ETH_P_ALL, 0x0003 (big endian ==
network order), whereas on little-endian it is waiting for 0x0300.
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
Convert malloc()/ calloc() calls to g_malloc()/ g_try_malloc()/ g_new0()
All heap memory allocation should go through glib so that we can take
advantage of a single memory allocator and its debugging/tracing features.
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Harmandeep Kaur <write.harmandeep@gmail.com>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
According to comments in /usr/include/linux/eventpoll.h,
poll_event is packed only on x86_64.
And to be sure fields are correctly aligned in epoll_data,
use abi_XXX types for all of them.
Moreover, fd type is wrong: fd is int, not ulong.
This has been tested with a ppc guest on an x86_64 host:
without this patch, systemd crashes (core).
CC: Alexander Graf <agraf@suse.de>
CC: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
This patch introduces a system very similar to the one used in the kernel
to attach specific functions to a given file descriptor.
In this case, we attach a specific "host_to_target()" translator to the fd
returned by signalfd() to be able to byte-swap the signalfd_siginfo
structure provided by read().
This patch allows to execute the example program given by
man signalfd(2):
#include <sys/signalfd.h>
#include <signal.h>
#include <unistd.h>
#include <stdlib.h>
#include <stdio.h>
#define handle_error(msg) \
do { perror(msg); exit(EXIT_FAILURE); } while (0)
int
main(int argc, char *argv[])
{
sigset_t mask;
int sfd;
struct signalfd_siginfo fdsi;
ssize_t s;
sigemptyset(&mask);
sigaddset(&mask, SIGINT);
sigaddset(&mask, SIGQUIT);
/* Block signals so that they aren't handled
according to their default dispositions */
if (sigprocmask(SIG_BLOCK, &mask, NULL) == -1)
handle_error("sigprocmask");
sfd = signalfd(-1, &mask, 0);
if (sfd == -1)
handle_error("signalfd");
for (;;) {
s = read(sfd, &fdsi, sizeof(struct signalfd_siginfo));
if (s != sizeof(struct signalfd_siginfo))
handle_error("read");
if (fdsi.ssi_signo == SIGINT) {
printf("Got SIGINT\n");
} else if (fdsi.ssi_signo == SIGQUIT) {
printf("Got SIGQUIT\n");
exit(EXIT_SUCCESS);
} else {
printf("Read unexpected signal\n");
}
}
}
$ ./signalfd_demo
^CGot SIGINT
^CGot SIGINT
^\Got SIGQUIT
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
"Unimplemented" messages go to stderr, everything else goes to tracepoints
Reviewed-by: Laurent Vivier <lvivier@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Ensure that all log writes are protected by qemu_loglevel_mask or,
in serious cases, go to both the log and stderr.
Reviewed-by: Laurent Vivier <lvivier@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
In some cases, the same message is printed both on stderr and in the log.
Avoid duplicate output in the default case where stderr _is_ the log,
and standardize this to stderr+log where it used to use stdio+log.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Anthony reported that >4GB guests on Xen with 32bit QEMU broke after
commit 4ed023c ("Round up RAMBlock sizes to host page sizes", 2015-11-05).
In that patch sizes are masked against qemu_host_page_size/mask which
are uintptr_t, and thus 32bit on a 32bit QEMU, even though the ram space
might be bigger than 4GB on Xen.
Since ram_addr_t is not available on user-mode emulation targets, ensure
that we get a sign extension when masking away the low bits of the address.
Remove the ~10 year old scary comment that the type of these variables
is probably wrong, with another equally scary comment. The new comment
however does not have "???" in it, which is arguably an improvement.
For completeness use the alignment macros in linux-user and bsd-user
instead of manually doing an &. linux-user and bsd-user are not affected
by the Xen issue, however.
Reviewed-by: Juan Quintela <quintela@redhat.com>
Reported-by: Anthony PERARD <anthony.perard@citrix.com>
Fixes: 4ed023ce2a
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
