Coverity warns (CID 1390634) that open_net_route() is not
checking the return value from sscanf(), which means that
it might then use values that aren't initialized.
Errors here should in general not happen since we're passing
an assumed-good /proc/net/route from the host kernel, but
if we do fail to parse a line then just skip it in the output
we pass to the guest.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20190205174207.9278-1-peter.maydell@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Summary:
This is to fix bug https://bugs.launchpad.net/qemu/+bug/1796754.
It is valid for ifc_buf to be NULL according to
http://man7.org/linux/man-pages/man7/netdevice.7.html.
Signed-off-by: Kan Li <likan_999.student@sina.com>
Reviewed-by: Laurent Vivier <lvivier@redhat.com>
Message-Id: <20181024201303.114-1-likan_999.student@sina.com>
[lv: fix errors reported by checkpatch.pl]
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20190201195404.30486-2-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Initialize the keys to a non-zero value on process start.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
It's either "GNU *Library* General Public License version 2" or
"GNU Lesser General Public License version *2.1*", but there was
no "version 2.0" of the "Lesser" license. So assume that version
2.1 is meant here.
Also some files mention the GPL instead of the LGPL after declaring
that the files are licensed under the LGPL, so change these spots to
use LGPL, too.
Reviewed-by: Liam Merwick <liam.merwick@oracle.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <1548769438-28942-1-git-send-email-thuth@redhat.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Clang version 3.4.2 does not know the -Wpragmas option yet and bails
out with an error when we try to disable it in linux-user/qemu.h.
Fortunately, clang has a __has_warning() macro which allows us to add
an explicit check for the option that we want to ignore. With that we
can check for the availability of "-Waddress-of-packed-member" properly
and do not need the "-Wpragmas" at all here.
Fixes: 850d5e330a
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Most files that have TABs only contain a handful of them. Change
them to spaces so that we don't confuse people.
disas, standard-headers, linux-headers and libdecnumber are imported
from other projects and probably should be exempted from the check.
Outside those, after this patch the following files still contain both
8-space and TAB sequences at the beginning of the line. Many of them
have a majority of TABs, or were initially committed with all tabs.
bsd-user/i386/target_syscall.h
bsd-user/x86_64/target_syscall.h
crypto/aes.c
hw/audio/fmopl.c
hw/audio/fmopl.h
hw/block/tc58128.c
hw/display/cirrus_vga.c
hw/display/xenfb.c
hw/dma/etraxfs_dma.c
hw/intc/sh_intc.c
hw/misc/mst_fpga.c
hw/net/pcnet.c
hw/sh4/sh7750.c
hw/timer/m48t59.c
hw/timer/sh_timer.c
include/crypto/aes.h
include/disas/bfd.h
include/hw/sh4/sh.h
libdecnumber/decNumber.c
linux-headers/asm-generic/unistd.h
linux-headers/linux/kvm.h
linux-user/alpha/target_syscall.h
linux-user/arm/nwfpe/double_cpdo.c
linux-user/arm/nwfpe/fpa11_cpdt.c
linux-user/arm/nwfpe/fpa11_cprt.c
linux-user/arm/nwfpe/fpa11.h
linux-user/flat.h
linux-user/flatload.c
linux-user/i386/target_syscall.h
linux-user/ppc/target_syscall.h
linux-user/sparc/target_syscall.h
linux-user/syscall.c
linux-user/syscall_defs.h
linux-user/x86_64/target_syscall.h
slirp/cksum.c
slirp/if.c
slirp/ip.h
slirp/ip_icmp.c
slirp/ip_icmp.h
slirp/ip_input.c
slirp/ip_output.c
slirp/mbuf.c
slirp/misc.c
slirp/sbuf.c
slirp/socket.c
slirp/socket.h
slirp/tcp_input.c
slirp/tcpip.h
slirp/tcp_output.c
slirp/tcp_subr.c
slirp/tcp_timer.c
slirp/tftp.c
slirp/udp.c
slirp/udp.h
target/cris/cpu.h
target/cris/mmu.c
target/cris/op_helper.c
target/sh4/helper.c
target/sh4/op_helper.c
target/sh4/translate.c
tcg/sparc/tcg-target.inc.c
tests/tcg/cris/check_addo.c
tests/tcg/cris/check_moveq.c
tests/tcg/cris/check_swap.c
tests/tcg/multiarch/test-mmap.c
ui/vnc-enc-hextile-template.h
ui/vnc-enc-zywrle.h
util/envlist.c
util/readline.c
The following have only TABs:
bsd-user/i386/target_signal.h
bsd-user/sparc64/target_signal.h
bsd-user/sparc64/target_syscall.h
bsd-user/sparc/target_signal.h
bsd-user/sparc/target_syscall.h
bsd-user/x86_64/target_signal.h
crypto/desrfb.c
hw/audio/intel-hda-defs.h
hw/core/uboot_image.h
hw/sh4/sh7750_regnames.c
hw/sh4/sh7750_regs.h
include/hw/cris/etraxfs_dma.h
linux-user/alpha/termbits.h
linux-user/arm/nwfpe/fpopcode.h
linux-user/arm/nwfpe/fpsr.h
linux-user/arm/syscall_nr.h
linux-user/arm/target_signal.h
linux-user/cris/target_signal.h
linux-user/i386/target_signal.h
linux-user/linux_loop.h
linux-user/m68k/target_signal.h
linux-user/microblaze/target_signal.h
linux-user/mips64/target_signal.h
linux-user/mips/target_signal.h
linux-user/mips/target_syscall.h
linux-user/mips/termbits.h
linux-user/ppc/target_signal.h
linux-user/sh4/target_signal.h
linux-user/sh4/termbits.h
linux-user/sparc64/target_syscall.h
linux-user/sparc/target_signal.h
linux-user/x86_64/target_signal.h
linux-user/x86_64/termbits.h
pc-bios/optionrom/optionrom.h
slirp/mbuf.h
slirp/misc.h
slirp/sbuf.h
slirp/tcp.h
slirp/tcp_timer.h
slirp/tcp_var.h
target/i386/svm.h
target/sparc/asi.h
target/xtensa/core-dc232b/xtensa-modules.inc.c
target/xtensa/core-dc233c/xtensa-modules.inc.c
target/xtensa/core-de212/core-isa.h
target/xtensa/core-de212/xtensa-modules.inc.c
target/xtensa/core-fsf/xtensa-modules.inc.c
target/xtensa/core-sample_controller/core-isa.h
target/xtensa/core-sample_controller/xtensa-modules.inc.c
target/xtensa/core-test_kc705_be/core-isa.h
target/xtensa/core-test_kc705_be/xtensa-modules.inc.c
tests/tcg/cris/check_abs.c
tests/tcg/cris/check_addc.c
tests/tcg/cris/check_addcm.c
tests/tcg/cris/check_addoq.c
tests/tcg/cris/check_bound.c
tests/tcg/cris/check_ftag.c
tests/tcg/cris/check_int64.c
tests/tcg/cris/check_lz.c
tests/tcg/cris/check_openpf5.c
tests/tcg/cris/check_sigalrm.c
tests/tcg/cris/crisutils.h
tests/tcg/cris/sys.c
tests/tcg/i386/test-i386-ssse3.c
ui/vgafont.h
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20181213223737.11793-3-pbonzini@redhat.com>
Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
Acked-by: Richard Henderson <richard.henderson@linaro.org>
Acked-by: Eric Blake <eblake@redhat.com>
Acked-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Stefan Markovic <smarkovic@wavecomp.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
There are not many, and they are all simple mistakes that ended up
being committed. Remove them.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20181213223737.11793-2-pbonzini@redhat.com>
Reviewed-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
Acked-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Most list head structs need not be given a name. In most cases the
name is given just in case one is going to use QTAILQ_LAST, QTAILQ_PREV
or reverse iteration, but this does not apply to lists of other kinds,
and even for QTAILQ in practice this is only rarely needed. In addition,
we will soon reimplement those macros completely so that they do not
need a name for the head struct. So clean up everything, not giving a
name except in the rare case where it is necessary.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Linux returns success if pwrite64() or pread64() are called with a
zero length NULL buffer, but QEMU was returning -TARGET_EFAULT.
This is the same bug that we fixed in commit 58cfa6c2e6
for the write syscall, and long before that in 38d840e679
for the read syscall.
Fixes: https://bugs.launchpad.net/qemu/+bug/1810433
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20190108184900.9654-1-peter.maydell@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
The VSX register array is a block of 64 128-bit registers where the first 32
registers consist of the existing 64-bit FP registers extended to 128-bit
using new VSR registers, and the last 32 registers are the VMX 128-bit
registers as show below:
64-bit 64-bit
+--------------------+--------------------+
| FP0 | | VSR0
+--------------------+--------------------+
| FP1 | | VSR1
+--------------------+--------------------+
| ... | ... | ...
+--------------------+--------------------+
| FP30 | | VSR30
+--------------------+--------------------+
| FP31 | | VSR31
+--------------------+--------------------+
| VMX0 | VSR32
+-----------------------------------------+
| VMX1 | VSR33
+-----------------------------------------+
| ... | ...
+-----------------------------------------+
| VMX30 | VSR62
+-----------------------------------------+
| VMX31 | VSR63
+-----------------------------------------+
In order to allow for future conversion of VSX instructions to use TCG vector
operations, recreate the same layout using an aligned version of the existing
vsr register array.
Since the old fpr and avr register arrays are removed, the existing callers
must also be updated to use the correct offset in the vsr register array. This
also includes switching the relevant VMState fields over to using subarrays
to make sure that migration is preserved.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Acked-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Michael Clark <mjc@sifive.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <9d777f619840a8dd8e4f3834dcfc3bd28e052ccd.1545246859.git.alistair.francis@wdc.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Michael Clark <mjc@sifive.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <76f8f9383a766dbcade883e897dec8cfef669799.1545246859.git.alistair.francis@wdc.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Perform needed checks before actual prctl() PR_SET_FP_MODE and
PR_GET_FP_MODE work based on kernel implementation. Also, update
necessary hflags.
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: Stefan Markovic <smarkovic@wavecomp.com>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Coverity complains (CID 1390847) about some dead code in
do_sigreturn(). This is an if (err) clause that can never be
true, copied from the kernel (where __get_user returns an error).
The one code path that could report an error is in the
currently commented-out pseudocode for handling FPU register
restoring, so move the if into that comment (and fix the
broken indent in the comment in the process).
(The new position for the error check is also the semantically
correct one -- we should not restore the signal mask from
the signal frame if we get an error here, so the check must
be done before set_sigmask(), not after.)
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-id: 20181115114616.26265-1-peter.maydell@linaro.org
Add support for SO_REUSEPORT, including strace support. SO_REUSEPORT
was introduced relatively recently, since Linux 3.9, so use
'#if defined SO_REUSEPORT'.
Signed-off-by: Yunqiang Su <ysu@wavecomp.com>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <1540904108-30873-4-git-send-email-aleksandar.markovic@rt-rk.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
The nios2 main loop code's code does some odd
things with gdb_handlesig() that no other target
CPU does: it has some signals that are delivered
to gdb and only to gdb. Stop doing this, and instead
behave like all the other targets:
* a trap instruction becomes a SIGTRAP
* an unhandled exception type returned from cpu_exec()
causes us to abort(), not to try to hand gdb a SIGILL
This fixes in passing Coverity issue CID 1390853,
which was a complaint that the old code failed to
check the return value from gdb_handlesig().
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20181019174958.26616-3-peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
[lv: removed gdbsig unused variable]
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
The CPU main-loop routines for linux-user generally
call gdb_handlesig() when they're about to queue a
SIGTRAP signal. This is wrong, because queue_signal()
will cause us to pend a signal, and process_pending_signals()
will then call gdb_handlesig() itself. So the effect is that
we notify gdb of the SIGTRAP, and then if gdb says "OK,
continue with signal X" we will incorrectly notify
gdb of the signal X as well. We don't do this double-notify
for anything else, only SIGTRAP.
Remove this unnecessary and incorrect code from all
the targets except for nios2 (whose main loop is
doing something different and broken, and will be handled
in a separate patch).
This bug only manifests if the user responds to the reported
SIGTRAP using "signal SIGFOO" rather than "continue"; since
the latter is the overwhelmingly common thing to do after a
breakpoint most people won't have hit this.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20181019174958.26616-2-peter.maydell@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Remove some dead code spotted by Coverity (CID 1009855,
1390854, 1390847). The underlying cause in all these cases
is the same: QEMU's put_user operations can't result in
errors, but the kernel's equivalent does. So when code
was copied from the kernel signal-frame-setup/teardown
code, checks on error flags that were needed in the kernel
became dead code for us.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20181019161715.12122-1-peter.maydell@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Coldfire defines an "Unsupported instruction" exception if execution
of a valid instruction is attempted but the required hardware is not
present in the processor.
We use it with instructions that are in fact undefined or illegal,
and the exception expected in this case by the kernel is the
illegal exception, so this patch fixes that.
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20181030165554.5761-1-laurent@vivier.eu>
Stack pointer alignment code incorrectly adds stack_size to sp instead
of subtracting it. It also does not take flat_argvp_envp_on_stack() into
account when calculating stack_size. This results in initial stack
pointer misalignment with certain set of command line arguments and
environment variables and correct alignment for the same binary with a
different set of arguments. This misalignment causes failures in the
following tests in the testsuite of gcc built for xtensa uclinux:
gcc.dg/torture/vshuf-v64qi.c
gcc.dg/torture/vshuf-v8sf.c
gcc.dg/torture/vshuf-v8si.c
Reviewed-by: Laurent Vivier <lvivier@redhat.com>
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
(Thank you to Thomas Huth)
v2: fix 32bit build with updated patch (v3) from Philippe Mathieu-Daudé
built in a 32bit debian sid chroot
-----BEGIN PGP SIGNATURE-----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=sHPv
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/vivier2/tags/qemu-trivial-for-3.1-pull-request' into staging
QEMU trivial patches collected between June and October 2018
(Thank you to Thomas Huth)
v2: fix 32bit build with updated patch (v3) from Philippe Mathieu-Daudé
built in a 32bit debian sid chroot
# gpg: Signature made Tue 30 Oct 2018 11:23:01 GMT
# gpg: using RSA key F30C38BD3F2FBE3C
# gpg: Good signature from "Laurent Vivier <lvivier@redhat.com>"
# gpg: aka "Laurent Vivier <laurent@vivier.eu>"
# gpg: aka "Laurent Vivier (Red Hat) <lvivier@redhat.com>"
# Primary key fingerprint: CD2F 75DD C8E3 A4DC 2E4F 5173 F30C 38BD 3F2F BE3C
* remotes/vivier2/tags/qemu-trivial-for-3.1-pull-request:
milkymist-minimac2: Use qemu_log_mask(GUEST_ERROR) instead of error_report
ppc: move at24c to its own CONFIG_ symbol
hw/intc/gicv3: Remove useless parenthesis around DIV_ROUND_UP macro
hw/pci-host: Remove useless parenthesis around DIV_ROUND_UP macro
tests/bios-tables-test: Remove an useless cast
xen: Use the PCI_DEVICE macro
qobject: Catch another straggler for use of qdict_put_str()
configure: Support pkg-config for zlib
tests: Fix typos in comments and help message (found by codespell)
cpu.h: fix a typo in comment
linux-user: fix comment s/atomic_write/atomic_set/
qemu-iotests: make 218 executable
scripts/qemu.py: remove trailing quotes on docstring
scripts/decodetree.py: remove unused imports
docs/devel/testing.rst: add missing newlines after code block
qemu-iotests: fix filename containing checks
tests/tcg/README: fix location for lm32 tests
memory.h: fix typos in comments
vga_int: remove unused function protype
configs/alpha: Remove unused CONFIG_PARALLEL_ISA switch
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Implement MIPS specific prctl() PR_SET_FP_MODE and PR_GET_FP_MODE emulation.
Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Signed-off-by: Stefan Markovic <smarkovic@wavecomp.com>
Floating-point mode is calculated from MIPS.abiflags FP ABI value
(based on kernel implementation). Illegal combinations are rejected.
Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Signed-off-by: Stefan Markovic <smarkovic@wavecomp.com>
Set fp_abi and interp_fp_abi values to current fp_abi value read from
MIPS.abiflags.
Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Signed-off-by: Stefan Markovic <smarkovic@wavecomp.com>
Read MIPS.abiflags section from ELF file into Mips_elf_abiflags_v0 struct.
Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Signed-off-by: Stefan Markovic <smarkovic@wavecomp.com>
Add MIPS specific image_info struct fields fp_abi and interp_fp_abi
to store executable and interpreter fp_abi values (based on kernel
struct arch_elf_state in mips/include/asm/elf.h).
Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Signed-off-by: Stefan Markovic <smarkovic@wavecomp.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJb0HIuAAoJENSXKoln91plGcUH/3Lje5KF8kkShQ5dIrH9e8Xz
bvK6lXOLNnndEyrWqJNLaJs7eJKEV2N+E2sBmdIjKnWXVHW6gOW3QBMuVGPTT4rg
C6cntrh2HpnxibgJqrR+3RmjQHAI1Ktixhker9LWimF3ZZhcy4H6mFHwW9z7eBK4
+n/pbnk8fq4FlGHJ2teHhctVIma6slmd8lkMa9vdwVQwpAyzpP82XjrsoTeeYhmG
uuTvX3TFnXKGa9mYGxybpwKd4i+397l9fTQ4egx1KlZMR8OHuQItCBDOFdiQpHOg
yljCeG3jHEhNzVf+xW7JU692Lz097otWDbzWDJibYGJkdkhKfyHJ9PvCYaPiK6M=
=Sg8J
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/amarkovic/tags/mips-queue-oct-2018-part-2-v2' into staging
MIPS queue for October 2018 - part 2 - v2
# gpg: Signature made Wed 24 Oct 2018 14:22:54 BST
# gpg: using RSA key D4972A8967F75A65
# gpg: Good signature from "Aleksandar Markovic <amarkovic@wavecomp.com>"
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 8526 FBF1 5DA3 811F 4A01 DD75 D497 2A89 67F7 5A65
* remotes/amarkovic/tags/mips-queue-oct-2018-part-2-v2: (33 commits)
target/mips: Fix decoding of ALIGN and DALIGN instructions
target/mips: Fix the title of translate.c
linux-user/mips: Recognize the R5900 CPU model
target/mips: Define the R5900 CPU
tests/tcg/mips: Add tests for R5900 DIVU1
tests/tcg/mips: Add tests for R5900 DIV1
tests/tcg/mips: Add tests for R5900 MTLO1 and MTHI1
tests/tcg/mips: Add tests for R5900 MFLO1 and MFHI1
tests/tcg/mips: Add tests for R5900 three-operand MULTU1
tests/tcg/mips: Add tests for R5900 three-operand MULT1
tests/tcg/mips: Add tests for R5900 three-operand MULTU
tests/tcg/mips: Add tests for R5900 three-operand MULT
target/mips: Make R5900 DMULT[U], DDIV[U], LL[D] and SC[D] user only
target/mips: Support R5900 MOVN, MOVZ and PREF instructions from MIPS IV
target/mips: Support R5900 DIV1 and DIVU1 instructions
target/mips: Support R5900 MFLO1, MTLO1, MFHI1 and MTHI1 instructions
target/mips: Support R5900 three-operand MULT1 and MULTU1 instructions
target/mips: Support R5900 three-operand MULT and MULTU instructions
target/mips: Add a placeholder for R5900 MMI3 instruction subclass
target/mips: Add a placeholder for R5900 MMI2 instruction subclass
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This kind of ELF for the R5900 relies on an IEEE 754-1985 compliant FPU.
The R5900 FPU hardware is noncompliant and it is therefore emulated in
software by the Linux kernel. QEMU emulates a compliant FPU accordingly.
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Signed-off-by: Fredrik Noring <noring@nocrew.org>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20181016223115.24100-9-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20181016223115.24100-8-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Both arm and thumb2 division are controlled by the same ISAR field,
which takes care of the arm implies thumb case. Having M imply
thumb2 division was wrong for cortex-m0, which is v6m and does not
have thumb2 at all, much less thumb2 division.
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20181016223115.24100-5-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Most of the v8 extensions are self-contained within the ISAR
registers and are not implied by other feature bits, which
makes them the easiest to convert.
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20181016223115.24100-4-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
- request bflt support in configure;
- implement custom linux-user/xtensa/target_flat.h that doesn't put envp
on stack;
- fix #include "target_flat.h" in flatload.c so that it first search for
arch-customized version of the header.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Userspace submits a USB Request Buffer to the kernel, optionally
discards it, and finally reaps the URB. Thunk buffers from target
to host and back.
Tested by running an i386 scanner driver on ARMv7 and by running
the PowerPC lsusb utility on x86_64. The discardurb ioctl is
not exercised in these tests.
Signed-off-by: Cortland Tölva <cst@tolva.net>
Message-Id: <20181008163521.17341-4-cst@tolva.net>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Add infrastructure for handling MIPS-specific prctl(). This is,
for now, just an empty placeholder. The real handling will be
implemented in subsequent patches.
Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Signed-off-by: Stefan Markovic <smarkovic@wavecomp.com>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Add MIPS-specific prctl() options TARGET_PR_SET_FP_MODE and
TARGET_PR_SET_FP_MODE. These values are essentially copied from
linux kernel header include/uapi/linux/prctl.h.
This is done in a way consistent with a similar case of
aarch64-specific prctl() options TARGET_PR_SVE_SET_VL and
TARGET_PR_SVE_GET_VL.
Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Signed-off-by: Stefan Markovic <smarkovic@wavecomp.com>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Remove a comment suggesting that we need to call tb_flush()
after writing the SPARC signal frame trampoline insns.
This isn't necessary in QEMU, because (even if the guest
architecture requires explicit icache maintenance) we
ensure that memory writes result in invalidation of
translated code from that memory.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20181009184017.15675-1-peter.maydell@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Our __get_user_e() and __put_user_e() macros cause newer versions
of clang to generate false-positive -Waddress-of-packed-member
warnings if they are passed the address of a member of a packed
struct (see https://bugs.llvm.org/show_bug.cgi?id=39113).
Suppress these using the _Pragma() operator. Unfortunately
_Pragma() support in gcc is broken in some gcc versions and
in some usage contexts, so we limit the pragma usage here to clang.
To put in the pragmas we need to convert the macros from
expressions to statements, but all the callsites effectively
treat them as statements already so this is OK.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20181009161814.21257-1-peter.maydell@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
