main-loop.c has a dependency on iohandler.c, and everything breaks
if that dependency is instead satisfied by stubs/iohandler.c.
Just put everything in the same file to avoid strange dependencies
on the order of files in util-obj-y.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <1562952875-53702-1-git-send-email-pbonzini@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The check for poll_fds in g_assert() was incorrect. The correct assertion
should check "n_poll_fds + w->num <= ARRAY_SIZE(poll_fds)" because the
subsequent for-loop is doing access to poll_fds[n_poll_fds + i] where i
is in [0, w->num). This could happen with a very high number of file
descriptors and/or wait objects.
Signed-off-by: Lidong Chen <lidong.chen@oracle.com>
Suggested-by: Peter Maydell <peter.maydell@linaro.org>
Suggested-by: Liam Merwick <liam.merwick@oracle.com>
Reviewed-by: Liran Alon <liran.alon@oracle.com>
Reviewed-by: Darren Kenny <darren.kenny@oracle.com>
Reviewed-by: Li Qiang <liq3ea@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <ded30967982811617ce7f0222d11228130c198b7.1560806687.git.lidong.chen@oracle.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Prepare for making slirp/ a standalone project.
Remove some useless includes while at it.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20190212162524.31504-5-marcandre.lureau@redhat.com>
Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
Remove hard-coded dependency on slirp in main-loop, and use a "poll"
notifier instead. The notifier is registered per slirp instance.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
When qemu_signal_init() fails in qemu_init_main_loop(), we return
without setting an error. Its callers crash then when they try to
report the error with error_report_err().
To avoid such segmentation fault, add a new Error parameter to make
the call trace to propagate the err to the final caller.
Fixes: 2f78e491d7
Cc: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Fei Li <fli@suse.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20190113140849.38339-2-lifei1214@126.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Commit d759c951f3 ("replay: push
replay_mutex_lock up the call tree") removed the !timeout lock
optimization in the main loop.
The idea of the optimization was to avoid ping-pongs between threads by
keeping the Big QEMU Lock held across non-blocking (!timeout) main loop
iterations.
A warning is printed when the main loop spins without releasing BQL for
long periods of time. These warnings were supposed to aid debugging but
in practice they just alarm users. They are considered noise because
the cause of spinning is not shown and is hard to find.
Now that the lock optimization has been removed, there is no danger of
hogging the BQL. Drop the spin counter and the infamous warning.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Jeff Cody <jcody@redhat.com>
Convert all the multi-line uses of fprintf(stderr, "warning:"..."\n"...
to use warn_report() instead. This helps standardise on a single
method of printing warnings to the user.
All of the warnings were changed using these commands:
find ./* -type f -exec sed -i \
'N; {s|fprintf(.*".*warning[,:] \(.*\)\\n"\(.*\));|warn_report("\1"\2);|Ig}' \
{} +
find ./* -type f -exec sed -i \
'N;N; {s|fprintf(.*".*warning[,:] \(.*\)\\n"\(.*\));|warn_report("\1"\2);|Ig}' \
{} +
find ./* -type f -exec sed -i \
'N;N;N; {s|fprintf(.*".*warning[,:] \(.*\)\\n"\(.*\));|warn_report("\1"\2);|Ig}' \
{} +
find ./* -type f -exec sed -i \
'N;N;N;N {s|fprintf(.*".*warning[,:] \(.*\)\\n"\(.*\));|warn_report("\1"\2);|Ig}' \
{} +
find ./* -type f -exec sed -i \
'N;N;N;N;N {s|fprintf(.*".*warning[,:] \(.*\)\\n"\(.*\));|warn_report("\1"\2);|Ig}' \
{} +
find ./* -type f -exec sed -i \
'N;N;N;N;N;N {s|fprintf(.*".*warning[,:] \(.*\)\\n"\(.*\));|warn_report("\1"\2);|Ig}' \
{} +
find ./* -type f -exec sed -i \
'N;N;N;N;N;N;N; {s|fprintf(.*".*warning[,:] \(.*\)\\n"\(.*\));|warn_report("\1"\2);|Ig}' \
{} +
Indentation fixed up manually afterwards.
Some of the lines were manually edited to reduce the line length to below
80 charecters. Some of the lines with newlines in the middle of the
string were also manually edit to avoid checkpatch errrors.
The #include lines were manually updated to allow the code to compile.
Several of the warning messages can be improved after this patch, to
keep this patch mechanical this has been moved into a later patch.
Signed-off-by: Alistair Francis <alistair.francis@xilinx.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Kevin Wolf <kwolf@redhat.com>
Cc: Max Reitz <mreitz@redhat.com>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Igor Mammedov <imammedo@redhat.com>
Cc: Peter Maydell <peter.maydell@linaro.org>
Cc: Stefano Stabellini <sstabellini@kernel.org>
Cc: Anthony Perard <anthony.perard@citrix.com>
Cc: Richard Henderson <rth@twiddle.net>
Cc: Eduardo Habkost <ehabkost@redhat.com>
Cc: Aurelien Jarno <aurelien@aurel32.net>
Cc: Yongbok Kim <yongbok.kim@imgtec.com>
Cc: Cornelia Huck <cohuck@redhat.com>
Cc: Christian Borntraeger <borntraeger@de.ibm.com>
Cc: Alexander Graf <agraf@suse.de>
Cc: Jason Wang <jasowang@redhat.com>
Cc: David Gibson <david@gibson.dropbear.id.au>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <5def63849ca8f551630c6f2b45bcb1c482f765a6.1505158760.git.alistair.francis@xilinx.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
When running virt-rescue the serial console hangs from time to time.
Virt-rescue runs an ordinary Linux kernel "appliance", but there is
only a single idle process running inside, so the qemu main loop is
largely idle. With virt-rescue >= 1.37 you may be able to observe the
hang by doing:
$ virt-rescue -e ^] --scratch
><rescue> while true; do ls -l /usr/bin; done
The hang in virt-rescue can be resolved by pressing a key on the
serial console.
Possibly with the same root cause, we also observed hangs during very
early boot of regular Linux VMs with a serial console. Those hangs
are extremely rare, but you may be able to observe them by running
this command on baremetal for a sufficiently long time:
$ while libguestfs-test-tool -t 60 >& /tmp/log ; do echo -n . ; done
(Check in /tmp/log that the failure was caused by a hang during early
boot, and not some other reason)
During investigation of this bug, Paolo Bonzini wrote:
> glib is expecting QEMU to use g_main_context_acquire around accesses to
> GMainContext. However QEMU is not doing that, instead it is taking its
> own mutex. So we should add g_main_context_acquire and
> g_main_context_release in the two implementations of
> os_host_main_loop_wait; these should undo the effect of Frediano's
> glib patch.
This patch exactly implements Paolo's suggestion in that paragraph.
This fixes the serial console hang in my testing, across 3 different
physical machines (AMD, Intel Core i7 and Intel Xeon), over many hours
of automated testing. I wasn't able to reproduce the early boot hangs
(but as noted above, these are extremely rare in any case).
Bugzilla: https://bugzilla.redhat.com/show_bug.cgi?id=1435432
Reported-by: Richard W.M. Jones <rjones@redhat.com>
Tested-by: Richard W.M. Jones <rjones@redhat.com>
Signed-off-by: Richard W.M. Jones <rjones@redhat.com>
Message-Id: <20170331205133.23906-1-rjones@redhat.com>
[Paolo: this is actually a glib bug: recent glib versions are also
expecting g_main_context_acquire around g_poll---but that is not
documented and probably not even intended].
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
There is no change for now, because the callback just invokes
qemu_notify_event.
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This dependency is the wrong way, and we will need util/qemu-timer.h from
sysemu/cpus.h in the next patch.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The cast is there because sigbus_handler is invoked via sigfd_handler.
But it feels just wrong to use struct qemu_signalfd_siginfo in the
prototype of a function that is passed to sigaction.
Instead, do a simple-minded conversion of qemu_signalfd_siginfo to
siginfo_t.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
AioContext is fairly self contained, the only dependency is QEMUTimer but
that in turn doesn't need anything else. So move them out of block-obj-y
to avoid introducing a dependency from io/ to block-obj-y.
main-loop and its dependency iohandler also need to be moved, because
later in this series io/ will call iohandler_get_aio_context.
[Changed copyright "the QEMU team" to "other QEMU contributors" as
suggested by Daniel Berrange and agreed by Paolo.
--Stefan]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Message-id: 20170213135235.12274-2-pbonzini@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
