Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20210902113551.461632-11-imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20210902113551.461632-10-imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20210902113551.461632-8-imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20210902113551.461632-7-imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Set -smp 1,maxcpus=288 to test for ACPI code that
deal with CPUs with large APIC ID (>255).
PS:
Test requires KVM and in-kernel irqchip support,
so skip test if KVM is not available.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20210902113551.461632-5-imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20210902113551.461632-4-imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Currently it is not possible to create tests that have KVM as a hard
requirement on a host that doesn't support KVM for tested target
binary (modulo going through the trouble of compiling out
the offending test case).
Following scenario makes test fail when it's run on non x86 host:
qemu-system-x86_64 -enable-kvm -M q35,kernel-irqchip=on -smp 1,maxcpus=288
This patch introduces qtest_has_accel() to let users check if accel is
available in advance and avoid executing non run-able test-cases.
It implements detection of TCG and KVM only, the rest could be
added later on, when we actually start testing them in qtest.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20210902113551.461632-3-imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20210902113551.461632-2-imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The iothread isn't called 'iothread0', but 'thread0'. Depending on the
order that properties are parsed, the error message may change from the
expected one to another one saying that the iothread doesn't exist.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20211008133442.141332-7-kwolf@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Tested-by: Peter Krempa <pkrempa@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
iothread is a string property, so None (= JSON null) is not a valid
value for it. Pass the empty string instead to get the default iothread.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20211008133442.141332-6-kwolf@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Tested-by: Peter Krempa <pkrempa@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Cc: Alexander Oleinik <alxndr@bu.edu>
Reviewed-by: Alexander Bulekov <alxndr@bu.edu>
Tested-by: Alexander Bulekov <alxndr@bu.edu>
Message-Id: <20211007130829.632254-2-pbonzini@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
binutils started adding a .note.gnu.property ELF section which
makes the PVH test fail:
TEST hello on x86_64
qemu-system-x86_64: Error loading uncompressed kernel without PVH ELF Note
Discard .note.gnu* while keeping the PVH .note bits intact.
This also strips the build-id note, so drop the related comment.
Signed-off-by: Cole Robinson <crobinso@redhat.com>
Message-Id: <5ab2a54c262c61f64c22dbb49ade3e2db8a740bb.1633708346.git.crobinso@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This makes it possible to see what is happening, even if the output of
"make check-block" is not sent to a tty (for example if it is sent to
grep or tee).
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
"make check", if not preceded by "make", will not build the tools
needed by qemu-iotests. This happens because qemu-iotests, aka
"make check-block", is not yet part of meson.build.
While at it, remove the reference to the now-dead QEMU_IOTESTS_HELPERS-y
variable.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
It's not used anymore, now.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Hanna Reitz <hreitz@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-id: 20210923004938.3999963-11-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
This image is intended for building whatever the native versions of
QEMU are for the host architecture. This will hopefully be an aid for
3rd parties who want to be able to build QEMU themselves without
redoing all the dependencies themselves.
We disable the registry because we currently don't have multi-arch
support there.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Tested-by: Anders Roxell <anders.roxell@linaro.org>
Acked-by: Willian Rampazzo <willianr@redhat.com>
Message-Id: <20210922151528.2192966-1-alex.bennee@linaro.org>
To be able to cross build QEMU itself we need to include a few more
libraries. These are only available in Debian's unstable ports repo
for now so we need to base the riscv64 image on sid with the the
minimal libs needed to build QEMU (glib/pixman).
The result works but is not as clean as using build-dep to bring in
more dependencies. However sid is by definition a shifting pile of
sand and by keeping the list of libs minimal we reduce the chance of
having an image we can't build. It's good enough for a basic cross
build testing of TCG.
Cc: "Daniel P. Berrangé" <berrange@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20210914185830.1378771-2-richard.henderson@linaro.org>
[AJB: tweak allow_failure]
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20210917162332.3511179-5-alex.bennee@linaro.org>
We had some messy code to filter out stuff we can't build. Lets junk
that and simplify the logic by pushing some stuff into subdirs. In
particular we move:
float_helpers into libs - not a standalone test
linux-test into linux - so we only build on Linux hosts
This allows for at least some of the tests to be nominally usable
by *BSD user builds.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Cc: Warner Losh <imp@bsdimp.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Warner Losh <imp@bsdimp.com>
Message-Id: <20210917162332.3511179-4-alex.bennee@linaro.org>
This doesn't exist in BSD world and doesn't seem to be needed by
either.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Warner Losh <imp@bsdimp.com>
Message-Id: <20210917162332.3511179-3-alex.bennee@linaro.org>
v2: add small fix by Stefano, Hanna's series fixed
-----BEGIN PGP SIGNATURE-----
iQIzBAABCAAdFiEEi5wmzbL9FHyIDoahVh8kwfGfefsFAmFfEVMACgkQVh8kwfGf
eftAVA//WLtOaiVYPSjEl5EK80kry39VknZkQyeYUzyV7JNr/FRMlbJaIF2sOjH5
KPRpfwBiuijOc8R0s34HY0BpyweRd1rbypHblZkO7EO4XwHx1FLF5kNHF6yV7wPL
c9W564sZpc6Z96wSMgC4Is9QHJ6JbO4TJNJsG8v/PHEqGQV/yCYkgBox4loJckww
uSAZ7l63IWA8uPSq/rOu34bREKN9s0kHkvFq0JNWk2HtOBLDiRDUYmbSfdjfT4jz
np7ojKiffcAJED9JA28Zo2Y+MSId+FyoO4lbt+deMNzIHboy2oVlHouoHHprr61x
dIO7Qt1IoMk5IBIfkPRYkReMwxxSVKuIJcWm8Qqtkcg2X0g5ayNUmHwpBMd50h2z
XPjrr0YdOixhxMHoBnqlkPlWU0Y/B+YJIQ+mjqp+vRNkk94NoXhsXnCod1ajkgWO
zjc/dztew7HvNStJaMM0rnEjanLhzFZKtlMO4WwZHQp2yZG2AINkPStswo2f3AmL
FI+2By/UhFKm3BEemf0wYWDPWrPHU+BOiu16KjSKeS0GA9t7GXBUDRxNYPhUheXJ
eJKIpNsGbseNxKrAbLyRhAB75Fa/ReZqqybmEcLyal/ball3R/cNF3gaMHeX0o1n
HTGIAF5JOAXNGApS5TilkXPZ7jHFOVPh/Fi6/16/08tcgxjVfro=
=TVTu
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/vsementsov/tags/pull-jobs-2021-10-07-v2' into staging
mirror: Handle errors after READY cancel
v2: add small fix by Stefano, Hanna's series fixed
# gpg: Signature made Thu 07 Oct 2021 08:25:07 AM PDT
# gpg: using RSA key 8B9C26CDB2FD147C880E86A1561F24C1F19F79FB
# gpg: Good signature from "Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 8B9C 26CD B2FD 147C 880E 86A1 561F 24C1 F19F 79FB
* remotes/vsementsov/tags/pull-jobs-2021-10-07-v2:
iotests: Add mirror-ready-cancel-error test
mirror: Do not clear .cancelled
mirror: Stop active mirroring after force-cancel
mirror: Check job_is_cancelled() earlier
mirror: Use job_is_cancelled()
job: Add job_cancel_requested()
job: Do not soft-cancel after a job is done
jobs: Give Job.force_cancel more meaning
job: @force parameter for job_cancel_sync()
job: Force-cancel jobs in a failed transaction
mirror: Drop s->synced
mirror: Keep s->synced on error
job: Context changes in job_completed_txn_abort()
block/aio_task: assert `max_busy_tasks` is greater than 0
block/backup: avoid integer overflow of `max-workers`
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Test what happens when there is an I/O error after a mirror job in the
READY phase has been cancelled.
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Tested-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20211006151940.214590-14-hreitz@redhat.com>
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Callers should be able to specify whether they want job_cancel_sync() to
force-cancel the job or not.
In fact, almost all invocations do not care about consistency of the
result and just want the job to terminate as soon as possible, so they
should pass force=true. The replication block driver is the exception,
specifically the active commit job it runs.
As for job_cancel_sync_all(), all callers want it to force-cancel all
jobs, because that is the point of it: To cancel all remaining jobs as
quickly as possible (generally on process termination). So make it
invoke job_cancel_sync() with force=true.
This changes some iotest outputs, because quitting qemu while a mirror
job is active will now lead to it being cancelled instead of completed,
which is what we want. (Cancelling a READY mirror job with force=false
may take an indefinite amount of time, which we do not want when
quitting. If users want consistent results, they must have all jobs be
done before they quit qemu.)
Buglink: https://gitlab.com/qemu-project/qemu/-/issues/462
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20211006151940.214590-6-hreitz@redhat.com>
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Change from Philippe - Remove unused TCG temp
Change from Taylor - Probe the stores in a packet at start of commit
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJhXcRNAAoJEHsCRPsS3kQitBkH/0en3UJ5FYZVMbdhZW8UEsY7
Pg9I4zcLCwGWBnUSkhgdJbzjQPRDAs5rGl+fVswLrjjvtHE/528Yn4B+31s+GDwK
Ofz5RlwTM1rVfh/NW2PMhY97+/VUakH6lS6bEmcXyTmtwWx9OciEvxn8KblVENNG
a3F82cByh+G91Gw6n1fXER/Ksebtq22Cu/O3f8PAZU5UqqEbGoxStTptstG6BEDR
vPS2PBROn4S9W4YPjUUXds+RoW53TV1c/cdkAvWwa8bC2q/LJS3JqaoG9eaSQgkd
S3XObETATgaXdByXmqUYaioWsgRevRtEct44RZxG6e8qmyFuvEcLqTlDi8qqYl0=
=bmyK
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/quic/tags/pull-hex-20211006' into staging
Change from Philippe - Use tcg_constant_*
Change from Philippe - Remove unused TCG temp
Change from Taylor - Probe the stores in a packet at start of commit
# gpg: Signature made Wed 06 Oct 2021 08:44:13 AM PDT
# gpg: using RSA key 7B0244FB12DE4422
# gpg: Good signature from "Taylor Simpson (Rock on) <tsimpson@quicinc.com>" [marginal]
# gpg: WARNING: This key is not certified with sufficiently trusted signatures!
# gpg: It is not certain that the signature belongs to the owner.
# Primary key fingerprint: 3635 C788 CE62 B91F D4C5 9AB4 7B02 44FB 12DE 4422
* remotes/quic/tags/pull-hex-20211006:
target/hexagon: Use tcg_constant_*
target/hexagon: Remove unused TCG temporary from predicated loads
Hexagon (target/hexagon) probe the stores in a packet at start of commit
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
When a packet has 2 stores, either both commit or neither commit.
At the beginning of gen_commit_packet, we check for multiple stores.
If there are multiple stores, call a helper that will probe each of
them before proceeding with the commit.
Note that we don't call the probe helper for packets with only one
store. Therefore, we call process_store_log before anything else
involved in committing the packet.
We also fix a typo in the comment in process_store_log.
Test case added in tests/tcg/hexagon/hex_sigsegv.c
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Taylor Simpson <tsimpson@quicinc.com>
Message-Id: <1633036599-7637-1-git-send-email-tsimpson@quicinc.com>
1. Ignore the new f-strings warning, we're not interested in doing a
full conversion at this time.
2. Just mute the unbalanced-tuple-unpacking warning, it's not a real
error in this case and muting the dozens of callsites is just not
worth it.
3. Add encodings to read_text().
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20210923180715.4168522-7-jsnow@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Mostly uninteresting stuff. Move the test injections under a function
named main() so that the variables used during that process aren't in
the global scope.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Hanna Reitz <hreitz@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20210923180715.4168522-6-jsnow@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
We need to import subpackages from the qemu namespace package; importing
the namespace package alone doesn't bring the subpackages with it --
unless someone else (like iotests.py) imports them too.
Adjust the imports.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Hanna Reitz <hreitz@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20210923180715.4168522-5-jsnow@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
We can circumvent the '__main__' redefinition problem by passing
--scripts-are-modules. Take mypy out of the loop per-filename and check
everything in one go: it's quite a bit faster.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Hanna Reitz <hreitz@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20210923180715.4168522-4-jsnow@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
We can drop the sys.path hacking in various places by doing
this. Additionally, by doing it in one place right up top, we can print
interesting warnings in case the environment does not look correct. (See
next commit.)
If we ever decide to change how the environment is crafted, all of the
"help me find my python packages" goop is all in one place, right in one
function.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20210923180715.4168522-2-jsnow@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Now test fails if copy-before-write is not white-listed.
Let's skip test instead.
Fixes: c060598569
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20210920115538.264372-6-vsementsov@virtuozzo.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
By using PKG_CONFIG_PATH instead of PKG_CONFIG_LIBDIR,
we were still including the 64-bit packages. Install
pcre-devel.i686 to fill a missing glib2 dependency.
By using --extra-cflags instead of --cpu, we incorrectly
use the wrong probing during meson.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Richard W.M. Jones <rjones@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20210930163636.721311-3-richard.henderson@linaro.org>
The image was upgraded to a full image in ee381b7fe1.
This makes it possible to use docker-test@image syntax
with this container.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20210930163636.721311-2-richard.henderson@linaro.org>
For unknown and unrepeatable reasons, the cross-i386-tci test has
started failing. "Fix" this by updating the container to use fedora 34.
Add sysprof-capture-devel as a new dependency of glib2-devel that
was not correctly spelled out in the rpm rules.
Use dnf update Just In Case -- there are presently out-of-date
packages in the upstream docker registry.
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20211005205846.153724-1-richard.henderson@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
A huge acpi refactoring.
Fixes, cleanups all over the place.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
iQFDBAABCAAtFiEEXQn9CHHI+FuUyooNKB8NuNKNVGkFAmFcxB8PHG1zdEByZWRo
YXQuY29tAAoJECgfDbjSjVRpldIH/jpPtsQr8oC1RrP8lTmiWh9vC9c3Xa5xfH7k
lXOn01kPprAWsm+qpoydOKJk/6v8TJ2E5nQ5AIU5EQvOEqSp8VnO0swHvTC7bwBa
1mGBvN3Ssjd/XFcgEc1xRJMzTO+Z1uF9tlq9ymDhLDtnuswyu5fl71NoXNVqE4st
r9wQrDX1lgzAUzL2QBr/g8wzx7aDS9HIyTrbl+ehzVEBrNKggo+AQgtSpyS1lxEC
NCIirfoaGgTKKrMASms5dXW44XNL/lXsZtheYrfF5nLiatCcthJNGnZ/BhUelH2B
EjXax7zs3IpWvRoGxRyqxElWgaCA2IXVvtLsT3WBqrTmi0Hoku8=
=nFLU
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/mst/tags/for_upstream' into staging
pc,pci,virtio: features, fixes
A huge acpi refactoring.
Fixes, cleanups all over the place.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
# gpg: Signature made Tue 05 Oct 2021 02:31:11 PM PDT
# gpg: using RSA key 5D09FD0871C8F85B94CA8A0D281F0DB8D28D5469
# gpg: issuer "mst@redhat.com"
# gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>" [full]
# gpg: aka "Michael S. Tsirkin <mst@redhat.com>" [full]
* remotes/mst/tags/for_upstream: (47 commits)
hw/i386/amd_iommu: Add description/category to TYPE_AMD_IOMMU_PCI
hw/i386/amd_iommu: Rename SysBus specific functions as amdvi_sysbus_X()
hw/i386/amd_iommu: Rename amdviPCI TypeInfo
nvdimm: release the correct device list
virtio-balloon: Fix page-poison subsection name
bios-tables-test: Update ACPI DSDT table golden blobs for q35
hw/i386/acpi: fix conflicting IO address range for acpi pci hotplug in q35
bios-tables-test: allow changes in DSDT ACPI tables for q35
acpi: AcpiGenericAddress no longer used to map/access fields of MMIO, drop packed attribute
acpi: remove no longer used build_header()
acpi: build_facs: use build_append_int_noprefix() API to compose table
acpi: arm/virt: build_gtdt: use acpi_table_begin()/acpi_table_end() instead of build_header()
acpi: arm/virt: build_spcr: use acpi_table_begin()/acpi_table_end() instead of build_header()
acpi: arm/virt: build_spcr: fix invalid cast
acpi: arm/virt: convert build_iort() to endian agnostic build_append_FOO() API
acpi: arm: virt: build_iort: use acpi_table_begin()/acpi_table_end() instead of build_header()
acpi: arm: virt: build_dsdt: use acpi_table_begin()/acpi_table_end() instead of build_header()
acpi: build_dsdt_microvm: use acpi_table_begin()/acpi_table_end() instead of build_header()
acpi: arm/virt: madt: use build_append_int_noprefix() API to compose MADT table
acpi: x86: madt: use build_append_int_noprefix() API to compose MADT table
...
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
We are going to commit a change to fix IO address range allocated for acpi pci
hotplug in q35. This affects DSDT tables. This change allows DSDT table
modification so that unit tests are not broken.
Signed-off-by: Ani Sinha <ani@anisinha.ca>
Acked-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20210916132838.3469580-2-ani@anisinha.ca>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Meson 0.58.2 does not need b_staticpic=$pie anymore, and has
stabilized the keyval module. Remove the workaround and use a few
replacements for features deprecated in the 0.57.0 release cycle.
One feature that we would like to use is passing dependencies to
summary. However, that was broken in 0.59.0 and 0.59.1. Therefore,
use the embedded Meson if the host has anything older than 0.59.2,
but allow --meson= to use 0.58.2.
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
True, we do not check the validity of this symbol -- but we don't check
the validity of definition names during parse, either -- that happens
later, during the expr check. I don't want to introduce a dependency on
expr.py:check_name_str here and introduce a cycle.
Instead, rest assured that a documentation block is required for each
definition. This requirement uses the names of each section to ensure
that we fulfilled this requirement.
e.g., let's say that block-core.json has a comment block for
"Snapshot!Info" by accident. We'll see this error message:
In file included from ../../qapi/block.json:8:
../../qapi/block-core.json: In struct 'SnapshotInfo':
../../qapi/block-core.json:38: documentation comment is for 'Snapshot!Info'
That's a pretty decent error message.
Now, let's say that we actually mangle it twice, identically:
../../qapi/block-core.json: In struct 'Snapshot!Info':
../../qapi/block-core.json:38: struct has an invalid name
That's also pretty decent. If we forget to fix it in both places, we'll
just be back to the first error.
Therefore, let's just drop this FIXME and adjust the error message to
not imply a more thorough check than is actually performed.
Signed-off-by: John Snow <jsnow@redhat.com>
Message-Id: <20210930205716.1148693-6-jsnow@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Several QGA definitions omit a blank line after the symbol
declaration. This works OK currently, but it's the only place where we
do this. Adjust it for consistency.
Future commits may wind up enforcing this formatting.
Signed-off-by: John Snow <jsnow@redhat.com>
Message-Id: <20210930205716.1148693-5-jsnow@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Pylint informs us we're not using these arguments. Oops, it's
right. Correct the error message and remove the remaining unused
parameter.
Fix test output now that the error message is improved.
Fixes: e151941d1b
Signed-off-by: John Snow <jsnow@redhat.com>
Message-Id: <20210930205716.1148693-4-jsnow@redhat.com>
[Commit message formatting tweaked]
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Since commit 80d7835749 (qemu-options: rewrite help for -smp options),
the preference of sockets/cores in -smp parsing is considered liable
to change, and actually we are going to change it in a coming commit.
So it'll be more stable to use detailed -smp CLIs in the testcases
that have strong dependency on the parsing results.
Currently, test_def_cpu_split use "-smp 8" and will get 8 CPU sockets
based on current parsing rule. But if we change to prefer cores over
sockets we will get one CPU socket with 8 cores, and this testcase
will not get expected numa set by default on x86_64 (Ok on aarch64).
So now explicitly use "-smp 8,sockets=8" to avoid affect from parsing
logic change.
Signed-off-by: Yanan Wang <wangyanan55@huawei.com>
Reviewed-by: Andrew Jones <drjones@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20210929025816.21076-9-wangyanan55@huawei.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Since commit 80d7835749 (qemu-options: rewrite help for -smp options),
the preference of sockets/cores in -smp parsing is considered liable
to change, and actually we are going to change it in a coming commit.
So it'll be more stable to use detailed -smp CLIs in testing if we
have strong dependency on the parsing results.
pc_dynamic_cpu_cfg currently assumes/needs that there will be 2 CPU
sockets with "-smp 2". To avoid breaking the test because of parsing
logic change, now explicitly use "-smp 2,sockets=2".
Signed-off-by: Yanan Wang <wangyanan55@huawei.com>
Reviewed-by: Andrew Jones <drjones@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20210929025816.21076-8-wangyanan55@huawei.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
With signal trampolines safely off the stack for all
guests besides hppa, we can re-enable this test.
It does show up a problem with sh4 (unrelated?),
so leave that test disabled for now.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20210929130553.121567-27-richard.henderson@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Skip the test if bzip2 is not available, and run it after they are
uncompressed.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20210923105529.3845741-2-pbonzini@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Libvirt can use query-sgx-capabilities to get the host
sgx capabilities to decide how to allocate SGX EPC size to VM.
Signed-off-by: Yang Zhong <yang.zhong@intel.com>
Message-Id: <20210910102258.46648-3-yang.zhong@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The QMP and HMP interfaces can be used by monitor or QMP tools to retrieve
the SGX information from VM side when SGX is enabled on Intel platform.
Signed-off-by: Yang Zhong <yang.zhong@intel.com>
Message-Id: <20210910102258.46648-2-yang.zhong@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
We are generally moving to int64_t for both offset and bytes parameters
on all io paths.
Main motivation is realization of 64-bit write_zeroes operation for
fast zeroing large disk chunks, up to the whole disk.
We chose signed type, to be consistent with off_t (which is signed) and
with possibility for signed return type (where negative value means
error).
So, convert driver discard handlers bytes parameter to int64_t.
The only caller of all updated function is bdrv_co_pdiscard in
block/io.c. It is already prepared to work with 64bit requests, but
pass at most max(bs->bl.max_pdiscard, INT_MAX) to the driver.
Let's look at all updated functions:
blkdebug: all calculations are still OK, thanks to
bdrv_check_qiov_request().
both rule_check and bdrv_co_pdiscard are 64bit
blklogwrites: pass to blk_loc_writes_co_log which is 64bit
blkreplay, copy-on-read, filter-compress: pass to bdrv_co_pdiscard, OK
copy-before-write: pass to bdrv_co_pdiscard which is 64bit and to
cbw_do_copy_before_write which is 64bit
file-posix: one handler calls raw_account_discard() is 64bit and both
handlers calls raw_do_pdiscard(). Update raw_do_pdiscard, which pass
to RawPosixAIOData::aio_nbytes, which is 64bit (and calls
raw_account_discard())
gluster: somehow, third argument of glfs_discard_async is size_t.
Let's set max_pdiscard accordingly.
iscsi: iscsi_allocmap_set_invalid is 64bit,
!is_byte_request_lun_aligned is 64bit.
list.num is uint32_t. Let's clarify max_pdiscard and
pdiscard_alignment.
mirror_top: pass to bdrv_mirror_top_do_write() which is
64bit
nbd: protocol limitation. max_pdiscard is alredy set strict enough,
keep it as is for now.
nvme: buf.nlb is uint32_t and we do shift. So, add corresponding limits
to nvme_refresh_limits().
preallocate: pass to bdrv_co_pdiscard() which is 64bit.
rbd: pass to qemu_rbd_start_co() which is 64bit.
qcow2: calculations are still OK, thanks to bdrv_check_qiov_request(),
qcow2_cluster_discard() is 64bit.
raw-format: raw_adjust_offset() is 64bit, bdrv_co_pdiscard too.
throttle: pass to bdrv_co_pdiscard() which is 64bit and to
throttle_group_co_io_limits_intercept() which is 64bit as well.
test-block-iothread: bytes argument is unused
Great! Now all drivers are prepared to handle 64bit discard requests,
or else have explicit max_pdiscard limits.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20210903102807.27127-11-vsementsov@virtuozzo.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
We are generally moving to int64_t for both offset and bytes parameters
on all io paths.
Main motivation is realization of 64-bit write_zeroes operation for
fast zeroing large disk chunks, up to the whole disk.
We chose signed type, to be consistent with off_t (which is signed) and
with possibility for signed return type (where negative value means
error).
So, convert driver write handlers parameters which are already 64bit to
signed type.
While being here, convert also flags parameter to be BdrvRequestFlags.
Now let's consider all callers. Simple
git grep '\->bdrv_\(aio\|co\)_pwritev\(_part\)\?'
shows that's there three callers of driver function:
bdrv_driver_pwritev() and bdrv_driver_pwritev_compressed() in
block/io.c, both pass int64_t, checked by bdrv_check_qiov_request() to
be non-negative.
qcow2_save_vmstate() does bdrv_check_qiov_request().
Still, the functions may be called directly, not only by drv->...
Let's check:
git grep '\.bdrv_\(aio\|co\)_pwritev\(_part\)\?\s*=' | \
awk '{print $4}' | sed 's/,//' | sed 's/&//' | sort | uniq | \
while read func; do git grep "$func(" | \
grep -v "$func(BlockDriverState"; done
shows several callers:
qcow2:
qcow2_co_truncate() write at most up to @offset, which is checked in
generic qcow2_co_truncate() by bdrv_check_request().
qcow2_co_pwritev_compressed_task() pass the request (or part of the
request) that already went through normal write path, so it should
be OK
qcow:
qcow_co_pwritev_compressed() pass int64_t, it's updated by this patch
quorum:
quorum_co_pwrite_zeroes() pass int64_t and int - OK
throttle:
throttle_co_pwritev_compressed() pass int64_t, it's updated by this
patch
vmdk:
vmdk_co_pwritev_compressed() pass int64_t, it's updated by this
patch
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20210903102807.27127-5-vsementsov@virtuozzo.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
We are generally moving to int64_t for both offset and bytes parameters
on all io paths.
Main motivation is realization of 64-bit write_zeroes operation for
fast zeroing large disk chunks, up to the whole disk.
We chose signed type, to be consistent with off_t (which is signed) and
with possibility for signed return type (where negative value means
error).
So, convert driver read handlers parameters which are already 64bit to
signed type.
While being here, convert also flags parameter to be BdrvRequestFlags.
Now let's consider all callers. Simple
git grep '\->bdrv_\(aio\|co\)_preadv\(_part\)\?'
shows that's there three callers of driver function:
bdrv_driver_preadv() in block/io.c, passes int64_t, checked by
bdrv_check_qiov_request() to be non-negative.
qcow2_load_vmstate() does bdrv_check_qiov_request().
do_perform_cow_read() has uint64_t argument. And a lot of things in
qcow2 driver are uint64_t, so converting it is big job. But we must
not work with requests that don't satisfy bdrv_check_qiov_request(),
so let's just assert it here.
Still, the functions may be called directly, not only by drv->...
Let's check:
git grep '\.bdrv_\(aio\|co\)_preadv\(_part\)\?\s*=' | \
awk '{print $4}' | sed 's/,//' | sed 's/&//' | sort | uniq | \
while read func; do git grep "$func(" | \
grep -v "$func(BlockDriverState"; done
The only one such caller:
QEMUIOVector qiov = QEMU_IOVEC_INIT_BUF(qiov, &data, 1);
...
ret = bdrv_replace_test_co_preadv(bs, 0, 1, &qiov, 0);
in tests/unit/test-bdrv-drain.c, and it's OK obviously.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20210903102807.27127-4-vsementsov@virtuozzo.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
[eblake: fix typos]
Signed-off-by: Eric Blake <eblake@redhat.com>
Fetch the OpenPOWER images to boot the powernv8 and powernv9 machines
with a simple PCI layout.
Cc: Cleber Rosa <crosa@redhat.com>
Cc: Philippe Mathieu-Daudé <philmd@redhat.com>
Cc: Wainer dos Santos Moschetta <wainersm@redhat.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20210817093036.1288791-1-clg@kaod.org>
Just a removal of an unused imported symbol.
Signed-off-by: Cleber Rosa <crosa@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20210924185506.2542588-16-crosa@redhat.com>
The NetBSD-7.1.2-prep.iso is no longer available on the CDN, but it's
still available in the archive.
Let's update its location so that users without the file on cache can
still fetch it and run the test.
Signed-off-by: Cleber Rosa <crosa@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20210924185506.2542588-15-crosa@redhat.com>
Just a clean up for an unused import.
Signed-off-by: Cleber Rosa <crosa@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20210924185506.2542588-13-crosa@redhat.com>
This matches the command line on 82a17d1d67, where the "on" or "off"
should be explicitly given.
Signed-off-by: Cleber Rosa <crosa@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20210924185506.2542588-9-crosa@redhat.com>
The "check-acceptance" make rule won't necessarily run *all* available
tests, because it employs a filter based on the currently configured
targets. This change in the description of the rule makes that
behavior extra clear.
Signed-off-by: Cleber Rosa <crosa@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20210924185506.2542588-3-crosa@redhat.com>
machine_ppc.py contains tests for 3 different ppc based machine types. It
is listed in MAINTAINERS along with the PPC TCG cpu code. That's not
really accurate though, since it's really more about testing those machines
than the CPUs.
Therefore, split it up into separate files for the separate machine types,
and list those along with their machine types in MAINTAINERS.
Suggested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20210927044808.73391-2-david@gibson.dropbear.id.au>
Add the possibility of running all the tests from a single file, or
multiple files, running a single test within a file or multiple tests
within multiple files using `make check-acceptance` and the
AVOCADO_TESTS environment variable.
Suggested-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Willian Rampazzo <willianr@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20210923161141.232208-4-willianr@redhat.com>
Although it is possible to run a specific test using the avocado
command-line, a user may want to use a specific tag while running the
``make check-acceptance`` during the development or debugging.
This allows using the AVOCADO_TAGS environment variable where the user
takes total control of which tests should run based on the tags defined.
This also makes the check-acceptance command flexible to restrict tests
based on tags while running on CI.
e.g.:
AVOCADO_TAGS="foo bar baz" make check-acceptance
Signed-off-by: Willian Rampazzo <willianr@redhat.com>
Tested-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
Reviewed-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20210923161141.232208-2-willianr@redhat.com>
Class hierarchy on Python is defined from right to left. Although the
current code is not harmful, let's fix it to avoid problems in the future.
Signed-off-by: Willian Rampazzo <willianr@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20210920204932.94132-7-willianr@redhat.com>
The linter is complaining the `pick_default_qemu_bin` is not explicitly
returning None. Fix it to explicitly return None and avoid R1710
inconsistent-return-statements.
Signed-off-by: Willian Rampazzo <willianr@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20210920204932.94132-6-willianr@redhat.com>
The current implementation will crash if the connection fails as the
`time` module is not imported. Fix the import problem. While here,
tweaks the connection to wait progressively when the connection fails.
Signed-off-by: Willian Rampazzo <willianr@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
[PMD: Reworded description]
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20210920204932.94132-5-willianr@redhat.com>
PEP3135 states when calling super(), there is no need to use arguments.
This changes the calls on avocado_qemu to standardize according to
PEP3135 and avoid warnings from linters.
Signed-off-by: Willian Rampazzo <willianr@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20210920204932.94132-3-willianr@redhat.com>
The avocado.Test class, used as the basis of the avocado_qemu.Test
class, performs a clean of temporary directories up as part of its own
tearDown() implementation.
But the avocado_qemu.Test class is currently missing the same clean
up, as it implemented its own tearDown() method without resorting to
the upper class behavior.
This brings avocado_qemu.Test behavior in sync with the standard
avocado.Test behavior and prevents temporary directories from
cluttering the test results directory (unless instructed to do so with
Avocado's "--keep-tmp" option).
Reported-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Cleber Rosa <crosa@redhat.com>
[willianr: respin to new Python super format]
Signed-off-by: Willian Rampazzo <willianr@redhat.com>
Reviewed-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20210920204932.94132-2-willianr@redhat.com>
This patch adds a test for record/replay, which boots Linux
image from the disk and interacts with the network.
The idea and code of this test is borrowed from boot_linux.py
This test includes only x86_64 platform. Other platforms and
machines will be added later after testing and improving
record/replay to completely support them.
Each test consists of the following phases:
- downloading the disk image
- recording the execution
- replaying the execution
Replay does not validates the output, but waits until QEMU
finishes the execution. This is reasonable, because
QEMU usually hangs when replay goes wrong.
Signed-off-by: Pavel Dovgalyuk <Pavel.Dovgaluk@ispras.ru>
Reviewed-by: Willian Rampazzo <willianr@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <162737554047.1735673.13133593401566029378.stgit@pasha-ThinkPad-X280>
This patch adds record/replay test which boots Linux
kernel on alpha platform. The test uses kernel binaries
taken from boot_linux_console test.
Signed-off-by: Pavel Dovgalyuk <Pavel.Dovgalyuk@ispras.ru>
Reviewed-by: Willian Rampazzo <willianr@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <162737553482.1735673.10021851966976933952.stgit@pasha-ThinkPad-X280>
This patch adds record/replay test which boots Linux
kernel on nios2 platform. The test uses kernel binaries
taken from boot_linux_console test.
Signed-off-by: Pavel Dovgalyuk <Pavel.Dovgalyuk@ispras.ru>
Reviewed-by: Willian Rampazzo <willianr@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <162737552919.1735673.12493523185952280539.stgit@pasha-ThinkPad-X280>
This patch adds record/replay test which boots Linux
kernel on openrisc platform. The test uses kernel binaries
taken from boot_linux_console test.
Signed-off-by: Pavel Dovgalyuk <Pavel.Dovgalyuk@ispras.ru>
Reviewed-by: Willian Rampazzo <willianr@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <162737552350.1735673.14603125561530143423.stgit@pasha-ThinkPad-X280>
This patch adds record/replay test which boots Linux
kernel on s390x platform. The test uses kernel binaries
taken from boot_linux_console test.
Signed-off-by: Pavel Dovgalyuk <Pavel.Dovgalyuk@ispras.ru>
Reviewed-by: Willian Rampazzo <willianr@redhat.com>
Acked-by: Thomas Huth <thuth@redhat.com>
[PMD: Drop default '-smp 1' as suggested by Thomas]
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <162737551785.1735673.6775108576116333386.stgit@pasha-ThinkPad-X280>
test-qapi.py -u updates the expected files. Since it fails when they
are absent, users have to create them manually before they can use
test-qapi.py to fill in the contents, say for a new test. Silly.
Improve -u to create them.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20210922125619.670673-3-armbru@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
https://docs.python.org/3.6/library/exceptions.html has
Changed in version 3.3: EnvironmentError, IOError, WindowsError,
socket.error, select.error and mmap.error have been merged into
OSError, and the constructor may return a subclass.
and
The following exceptions are kept for compatibility with previous
versions; starting from Python 3.3, they are aliases of OSError.
exception EnvironmentError
exception IOError
exception WindowsError
Only available on Windows.
Switch to the preferred name.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20210922125619.670673-2-armbru@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
[Details added to commit message]
Commit b359f4b203 "tests: Rename UserDefNativeListUnion to
UserDefListUnion" renamed test_clone_native_list() to
test_clone_list_union(). The function has nothing to do with unions.
Rename it to test_clone_list().
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20210917143134.412106-24-armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20210917143134.412106-23-armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com
Simple unions predate flat unions. Having both complicates the QAPI
schema language and the QAPI generator. We haven't been using simple
unions in new code for a long time, because they are less flexible and
somewhat awkward on the wire.
The previous commits eliminated simple union from the tree. Now drop
them from the QAPI schema language entirely, and update mentions of
"flat union" to just "union".
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20210917143134.412106-22-armbru@redhat.com>
Drop tests that are specifically about simple unions:
* SugaredUnion in doc-good: flat unions are covered by @Object.
* union-branch-case and union-clash-branches: branch naming for flat
unions is enforced for the tag enum instead, which is covered by
enum-member-case and enum-clash-member.
* union-empty: empty flat unions are covered by flat-union-empty.
Rewrite the remainder to use flat unions: args-union, bad-base,
flat-union-base-union, union-branch-invalid-dict, union-unknown.
Except drop union-optional-branch. because converting this one is not
worth the trouble; we don't explicitly check names beginning with '*'
in other places, either.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20210917143134.412106-21-armbru@redhat.com>
Replace simple union __org.qemu_x-Union1 with flat union
__org.qemu_x-Union2, except drop it from __org.qemu_x-command, because
there it's only used to pull it into QMP. Now drop the unused
-Union1, and rename -Union2 to -Union.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20210917143134.412106-20-armbru@redhat.com>
test_clone_complex3() uses simple union __org.qemu_x-Union1 to cover
arrays. Use UserDefOneList instead. Unions are still covered by
test_clone_complex1().
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20210917143134.412106-19-armbru@redhat.com>
Simple unions predate flat unions. Having both complicates the QAPI
schema language and the QAPI generator. We haven't been using simple
unions in new code for a long time, because they are less flexible and
somewhat awkward on the wire.
To prepare for their removal, rewrite TestIfUnion to be flat.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20210917143134.412106-18-armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20210917143134.412106-17-armbru@redhat.com>
Command boxed-union uses simple union UserDefListUnion to cover
unions. Use UserDefFlatUnion instead.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20210917143134.412106-16-armbru@redhat.com>
test_clone_complex1() uses simple union UserDefListUnion to cover
unions. Use UserDefFlatUnion instead. Arrays are still covered by
test_clone_complex3().
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20210917143134.412106-15-armbru@redhat.com>
The test_visitor_out_list_union_FOO() use simple union
UserDefListUnion to cover lists of builtin types. Rewrite as
test_visitor_out_list_struct(), using struct ArrayStruct and a lot
less code.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20210917143134.412106-14-armbru@redhat.com>
The test_visitor_in_list_union_FOO() use simple union UserDefListUnion
to cover lists of builtin types. Rewrite as
test_visitor_in_list_struct(), using struct ArrayStruct and a lot less
code.
test_visitor_in_fail_union_list() uses UserDefListUnion to cover
"variant members don't match the discriminator value". Cover that in
test_visitor_in_fail_union_flat() instead, and drop
test_visitor_in_fail_union_list(). Appropriating the former for this
purpose is okay, because it actually failed due to missing
discriminator, which is still covered by
test_visitor_in_fail_union_flat_no_discrim().
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20210917143134.412106-13-armbru@redhat.com>
Simple unions predate flat unions. Having both complicates the QAPI
schema language and the QAPI generator. We haven't been using simple
unions in new code for a long time, because they are less flexible and
somewhat awkward on the wire.
To prepare for their removal, simple union UserDefListUnion has to go.
It is used to cover arrays. The next few commits will eliminate its
uses, and then it gets deleted. As a first step, provide struct
ArrayStruct for the tests to be rewritten.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20210917143134.412106-12-armbru@redhat.com>
Simple unions predate flat unions. Having both complicates the QAPI
schema language and the QAPI generator. We haven't been using simple
unions in new code for a long time, because they are less flexible and
somewhat awkward on the wire.
To prepare for their removal, convert simple union SocketAddressLegacy
to an equivalent flat one, with existing enum SocketAddressType
replacing implicit enum type SocketAddressLegacyKind. Adds some
boilerplate to the schema, which is a bit ugly, but a lot easier to
maintain than the simple union feature.
Cc: "Daniel P. Berrangé" <berrange@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20210917143134.412106-9-armbru@redhat.com>
I'm about to convert simple unions to flat unions, then drop simple
union support. The conversion involves making the implict enum types
explicit. To reduce churn, I'd like to name them exactly like the
implicit types they replace. However, these names are reserved for
the generator's use. They won't be once simple unions are gone. Stop
enforcing this naming rule now rather than then.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20210917143134.412106-3-armbru@redhat.com>
Break lines between members instead of within members.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20210917143134.412106-2-armbru@redhat.com>
Although we have long supported 'qemu-img convert -o
backing_file=foo,backing_fmt=bar', the fact that we have a shortcut -B
for backing_file but none for backing_fmt has made it more likely that
users accidentally run into:
qemu-img: warning: Deprecated use of backing file without explicit backing format
when using -B instead of -o. For similarity with other qemu-img
commands, such as create and compare, add '-F $fmt' as the shorthand
for '-o backing_fmt=$fmt'. Update iotest 122 for coverage of both
spellings.
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <20210913131735.1948339-1-eblake@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
There is no conflict and no dependency if we have parallel writes to
different subclusters of one cluster when the cluster itself is already
allocated. So, relax extra dependency.
Measure performance:
First, prepare build/qemu-img-old and build/qemu-img-new images.
cd scripts/simplebench
./img_bench_templater.py
Paste the following to stdin of running script:
qemu_img=../../build/qemu-img-{old|new}
$qemu_img create -f qcow2 -o extended_l2=on /ssd/x.qcow2 1G
$qemu_img bench -c 100000 -d 8 [-s 2K|-s 2K -o 512|-s $((1024*2+512))] \
-w -t none -n /ssd/x.qcow2
The result:
All results are in seconds
------------------ --------- ---------
old new
-s 2K 6.7 ± 15% 6.2 ± 12%
-7%
-s 2K -o 512 13 ± 3% 11 ± 5%
-16%
-s $((1024*2+512)) 9.5 ± 4% 8.4
-12%
------------------ --------- ---------
So small writes are more independent now and that helps to keep deeper
io queue which improves performance.
271 iotest output becomes racy for three allocation in one cluster.
Second and third writes may finish in different order. Second and
third requests don't depend on each other any more. Still they both
depend on first request anyway. Filter out second and third write
offsets to cover both possible outputs.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20210824101517.59802-4-vsementsov@virtuozzo.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Hanna Reitz <hreitz@redhat.com>
[hreitz: s/ an / and /]
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
We must not inactivate child when parent has write permissions on
it.
Calling .bdrv_inactivate() doesn't help: actually only qcow2 has this
handler and it is used to flush caches, not for permission
manipulations.
So, let's simply check cumulative parent permissions before
inactivating the node.
This commit fixes a crash when we do migration during backup: prior to
the commit nothing prevents all nodes inactivation at migration finish
and following backup write to the target crashes on assertion
"assert(!(bs->open_flags & BDRV_O_INACTIVE));" in
bdrv_co_write_req_prepare().
After the commit, we rely on the fact that copy-before-write filter
keeps write permission on target node to be able to write to it. So
inactivation fails and migration fails as expected.
Corresponding test now passes, so, enable it.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Hanna Reitz <hreitz@redhat.com>
Message-Id: <20210911120027.8063-3-vsementsov@virtuozzo.com>
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
Add a simple test which tries to run migration during backup.
bdrv_inactivate_all() should fail. But due to bug (see next commit with
fix) it doesn't, nodes are inactivated and continued backup crashes
on assertion "assert(!(bs->open_flags & BDRV_O_INACTIVE));" in
bdrv_co_write_req_prepare().
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20210911120027.8063-2-vsementsov@virtuozzo.com>
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
297 so far does not check the named tests, which reside in the tests/
directory (i.e. full path tests/qemu-iotests/tests). Fix it.
Thanks to the previous two commits, all named tests pass its scrutiny,
so we do not have to add anything to SKIP_FILES.
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
Reviewed-by: Willian Rampazzo <willianr@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20210902094017.32902-6-hreitz@redhat.com>
The AbnormalShutdown exception class is not in qemu.machine, but in
qemu.machine.machine. (qemu.machine.AbnormalShutdown was enough for
Python to find it in order to run this test, but pylint complains about
it.)
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
Message-Id: <20210902094017.32902-5-hreitz@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
There are a couple of things pylint takes issue with:
- The "time" import is unused
- The import order (iotests should come last)
- get_bitmap_hash() doesn't use @self and so should be a function
- Semicolons at the end of some lines
- Parentheses after "if"
- Some lines are too long (80 characters instead of 79)
- inject_test_case()'s @name parameter shadows a top-level @name
variable
- "lambda self: mc(self)" were equivalent to just "mc", but in
inject_test_case(), it is not equivalent, so add a comment and disable
the warning locally
- Always put two empty lines after a function
- f'exec: cat > /dev/null' does not need to be an f-string
Fix them.
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
Message-Id: <20210902094017.32902-4-hreitz@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
pylint complains that discards1_sha256 and all_discards_sha256 are first
set in non-__init__ methods.
These variables are not really class-variables anyway, so let them
instead be returned by start_postcopy(), thus silencing pylint.
Suggested-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20210902094017.32902-3-hreitz@redhat.com>
169 and 199 have been renamed and moved to tests/ (commit a44be0334b:
"iotests: rename and move 169 and 199 tests"), so we can drop them from
the skip list.
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
Reviewed-by: Willian Rampazzo <willianr@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20210902094017.32902-2-hreitz@redhat.com>
pylint proposes using `[]` instead of `list()` and `{}` instead of
`dict()`, because it is faster. That seems simple enough, so heed its
advice.
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
Message-Id: <20210824153540.177128-3-hreitz@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
As of recently, pylint complains when `open()` calls are missing an
`encoding=` specified. Everything we have should be UTF-8 (and in fact,
everything should be UTF-8, period (exceptions apply)), so use that.
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
Message-Id: <20210824153540.177128-2-hreitz@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Added expected IORT files applicable with latest GICv3
ITS changes.Temporarily differences in these files are
okay.
Signed-off-by: Shashi Mallela <shashi.mallela@linaro.org>
Acked-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20210910143951.92242-8-shashi.mallela@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20210908045428.2689093-6-armbru@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
[check_infix()'s type hint fixed]
We flag this, but the error message is bogus:
bad-if-not.json:2: 'if' condition [] of struct is useless
The next commit will fix it.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20210908045428.2689093-5-armbru@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Verify that s390x-specific uc_mcontext.psw.addr is reported correctly
and that signal handling interacts properly with debugging.
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Acked-by: Alex Bennée <alex.bennee@linaro.org>
Acked-by: David Hildenbrand <david@redhat.com>
Message-Id: <20210804225146.154513-1-iii@linux.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
* Fix g_setenv problem discovered by Coverity
* Gitlab CI improvements
* Build system improvements (configure script + meson.build)
* Removal of the show-fixed-bugs.sh script
* Clean up of the sdl and curses options
-----BEGIN PGP SIGNATURE-----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=t3uT
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/thuth-gitlab/tags/pull-request-2021-09-06' into staging
* Add definitions of terms for CI/testing
* Fix g_setenv problem discovered by Coverity
* Gitlab CI improvements
* Build system improvements (configure script + meson.build)
* Removal of the show-fixed-bugs.sh script
* Clean up of the sdl and curses options
# gpg: Signature made Mon 06 Sep 2021 10:51:49 BST
# gpg: using RSA key 27B88847EEE0250118F3EAB92ED9D774FE702DB5
# gpg: issuer "thuth@redhat.com"
# gpg: Good signature from "Thomas Huth <th.huth@gmx.de>" [full]
# gpg: aka "Thomas Huth <thuth@redhat.com>" [full]
# gpg: aka "Thomas Huth <huth@tuxfamily.org>" [full]
# gpg: aka "Thomas Huth <th.huth@posteo.de>" [unknown]
# Primary key fingerprint: 27B8 8847 EEE0 2501 18F3 EAB9 2ED9 D774 FE70 2DB5
* remotes/thuth-gitlab/tags/pull-request-2021-09-06:
softmmu/vl: Deprecate the -sdl and -curses option
softmmu/vl: Deprecate the old grab options
softmmu/vl: Add a "grab-mod" parameter to the -display sdl option
scripts: Remove the "show-fixed-bugs.sh" file
configure / meson: Move the GBM handling to meson.build
meson.build: Don't use internal libfdt if the user requested the system libfdt
meson.build: Fix the check for a usable libfdt
gitlab-ci: Don't try to use the system libfdt in the debian job
libqtest: check for g_setenv() failure
docs: add definitions of terms for CI/testing
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
g_setenv() can fail; check for it when starting a QEMU process
when we set the QEMU_AUDIO_DRV environment variable.
Because this happens after fork() reporting an exact message
via printf() is a bad idea; just exit(1), as we already do
for the case of execlp() failure.
Fixes: Coverity CID 1460117
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20210820163750.9106-1-peter.maydell@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Fixes, cleanups all over the place.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
iQFDBAABCAAtFiEEXQn9CHHI+FuUyooNKB8NuNKNVGkFAmEz5lIPHG1zdEByZWRo
YXQuY29tAAoJECgfDbjSjVRp0WMIAL/keMtzBfVNaDAER/gaaklluJ7XCFYJgKfX
Pg173ZAWd+KNryiKDEn9SVIDzjKmllvQu0P18St92hHCCRhzIqlGwZ6IpB1XgVLh
OmcRlccepb+84FNiCD6RIxE+iLQ3eTrFUrpF6CIHZlD+TUTm7u1gtZFidV3v5EZp
BaT+BFxFZgejfKnxEYjnxOgAYmyXI18fFtW/GX6VgVTiy10XRoNqNZ6DwO2sZBNu
2NI2RMVMNopwQyn/1vj3KtBvhaqPdhrPV0qGzi9isU7t5Z2JE/n14O9WHcA4K2ed
3HktAGlv+glSbNldfc+9jIIHlkwHAi/T4PAGYE3HbCP0atONl/M=
=DN6u
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/mst/tags/for_upstream' into staging
pc,pci,virtio: fixes, cleanups
Fixes, cleanups all over the place.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
# gpg: Signature made Sat 04 Sep 2021 22:34:10 BST
# gpg: using RSA key 5D09FD0871C8F85B94CA8A0D281F0DB8D28D5469
# gpg: issuer "mst@redhat.com"
# gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>" [full]
# gpg: aka "Michael S. Tsirkin <mst@redhat.com>" [full]
# Primary key fingerprint: 0270 606B 6F3C DF3D 0B17 0970 C350 3912 AFBE 8E67
# Subkey fingerprint: 5D09 FD08 71C8 F85B 94CA 8A0D 281F 0DB8 D28D 5469
* remotes/mst/tags/for_upstream: (35 commits)
vhost-vdpa: remove the unncessary queue_index assignment
vhost-vdpa: fix the wrong assertion in vhost_vdpa_init()
vhost-vdpa: tweak the error label in vhost_vdpa_add()
vhost-vdpa: fix leaking of vhost_net in vhost_vdpa_add()
vhost-vdpa: don't cleanup twice in vhost_vdpa_add()
vhost-vdpa: remove the unnecessary check in vhost_vdpa_add()
vhost_net: do not assume nvqs is always 2
vhost: use unsigned int for nvqs
vhost_net: remove the meaningless assignment in vhost_net_start_one()
vhost-vdpa: correctly return err in vhost_vdpa_set_backend_cap()
vhost-vdpa: remove unused variable "acked_features"
tests/vhost-user-bridge.c: Fix typo in help message
tests/vhost-user-bridge.c: Sanity check socket path length
hw/virtio: Add flatview update in vhost_user_cleanup()
hw/virtio: Remove NULL check in virtio_free_region_cache()
hw/virtio: Document virtio_queue_packed_empty_rcu is called within RCU
MAINTAINERS: Added myself as a reviewer for acpi/smbios subsystem
hw/acpi: use existing references to pci device struct within functions
hw/pci: remove all references to find_i440fx function
hw/i386/acpi-build: Get NUMA information from struct NumaState
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Fix a typo in the help message printed by vhost-user-bridge.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20210901152713.25701-1-peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The vhost-user-bridge binary accepts a UNIX socket path on
the command line. Sanity check that this is short enough to
fit into a sockaddr_un before copying it in.
Fixes: Coverity CID 1432866
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20210901152632.25511-1-peter.maydell@linaro.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Since commit 5d83b9a130 "qapi: replace if condition list with dict
{'all': [...]}", we represent if conditionals as trees consisting of
OrderedDict, list and str. This results in less than legible test
output. For instance:
if OrderedDict([('not', OrderedDict([('any', [OrderedDict([('not', 'TEST_IF_EVT')]), OrderedDict([('not', 'TEST_IF_STRUCT')])])]))])
We intend to replace OrderedDict by dict when we get Python 3.7, which
will result in more legible output:
if {'not': {'any': [{'not': 'TEST_IF_EVT'}, {'not': 'TEST_IF_STRUCT'}]}}
Can't wait: put in a hack to get that now, with a comment to revert it
when we replace OrderedDict.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20210831123809.1107782-11-armbru@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Commit 6cc2e4817f "qapi: introduce QAPISchemaIfCond.cgen()" caused a
minor regression: redundant parenthesis. Subsequent commits
eliminated of many of them, but not all. Get rid of the rest now.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20210831123809.1107782-8-armbru@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
When commit 5d83b9a130 "qapi: replace if condition list with dict
{'all': [...]}" made cgen_ifcond() and docgen_ifcond() recursive, it
messed up parenthesises in the former, and got them right in the
latter, as the previous commit demonstrates.
To fix, adopt the latter's working code for the former. This
generates the correct code from the previous commit's commit message.
Fixes: 5d83b9a130
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20210831123809.1107782-6-armbru@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
The C code generated for 'if' conditionals is incorrectly
parenthesized. For instance,
'if': { 'not': { 'any': [ { 'not': 'TEST_IF_EVT' },
{ 'not': 'TEST_IF_STRUCT' } ] } } }
generates
#if !(!defined(TEST_IF_EVT)) || (!defined(TEST_IF_STRUCT))
This is wrong. Correct would be:
#if !(!defined(TEST_IF_EVT) || !defined(TEST_IF_STRUCT))
Cover the issue in qapi-schema-test.json. This generates bad #if in
tests/test-qapi-events.h and other files.
Add a similar condition to doc-good.json. The generated documentation
is fine.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20210831123809.1107782-5-armbru@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
A definition's conditional should imply the conditionals of types it
uses. If it doesn't, some configurations won't compile.
Example (from tests/qapi-schema/qapi-schema-test.json):
{ 'union': 'TestIfUnion', 'data':
{ 'foo': 'TestStruct',
'bar': { 'type': 'str', 'if': 'TEST_IF_UNION_BAR'} },
'if': { 'all': ['TEST_IF_UNION', 'TEST_IF_STRUCT'] } }
{ 'command': 'test-if-union-cmd',
'data': { 'union-cmd-arg': 'TestIfUnion' },
'if': 'TEST_IF_UNION' }
generates
#if (defined(TEST_IF_UNION)) && (defined(TEST_IF_STRUCT))
typedef struct TestIfUnion TestIfUnion;
#endif /* (defined(TEST_IF_UNION)) && (defined(TEST_IF_STRUCT)) */
and
#if defined(TEST_IF_UNION)
void qmp_test_if_union_cmd(TestIfUnion *union_cmd_arg, Error **errp);
void qmp_marshal_test_if_union_cmd(QDict *args, QObject **ret, Error **errp);
#endif /* defined(TEST_IF_UNION) */
which doesn't compile when !defined(TEST_IF_STRUCT).
Messed up in f8c4fdd6ae "tests/qapi: Cover commands with 'if' and
union / alternate 'data'", v4.0.0. Harmless, as we don't actually use
this configuration. Correct it anyway, along with another instance.
This loses coverage for 'not'. The next commit will bring it back.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20210831123809.1107782-4-armbru@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
- fix typo in execlog plugin
- clean-up and document gitlab FOO_RUNNER_AVAILABLE vars
- fix plugin build issue on OSX and modules
- add multi-core support to cache modelling plugin
- clean-ups for plugin arg=FOO handling
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEZoWumedRZ7yvyN81+9DbCVqeKkQFAmEwqF4ACgkQ+9DbCVqe
KkTCcAf/fCHK1hhXJIaxpFyMGvCkhYzUgKlpL4b05ofXFyQJ4JWp+0OadQzBcVIN
PwsVVsXik/5ibKvQiud8wt3/kbr9gj5RZdwVITZMEpod6hy9Nt5oaUhxEZpiVs3f
XZG17zaK8huwTwU6EtHWOnvIWMCuvBXpw8cM/6jF6pEiq162VJbiRo9L/aQ+n0Io
TZTy9YqEbrZUTj+XrvgPV0TewjM6T/zTujXFJtyCzYJ3P3kx9z5a3/KzfyJI9qkk
TYw0MX9MY8J5/sXcP6OjOqXqppsRe+G5Uaz0BoW9SvOmR/0nNGy/N8mVCZTD6mqs
zMsWw5RyIZsZCyWEYj4TYWEORv5Kiw==
=CBs1
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/stsquad/tags/pull-for-6.2-020921-1' into staging
Testing and plugin updates:
- fix typo in execlog plugin
- clean-up and document gitlab FOO_RUNNER_AVAILABLE vars
- fix plugin build issue on OSX and modules
- add multi-core support to cache modelling plugin
- clean-ups for plugin arg=FOO handling
# gpg: Signature made Thu 02 Sep 2021 11:33:02 BST
# gpg: using RSA key 6685AE99E75167BCAFC8DF35FBD0DB095A9E2A44
# gpg: Good signature from "Alex Bennée (Master Work Key) <alex.bennee@linaro.org>" [full]
# Primary key fingerprint: 6685 AE99 E751 67BC AFC8 DF35 FBD0 DB09 5A9E 2A44
* remotes/stsquad/tags/pull-for-6.2-020921-1: (22 commits)
docs/devel: be consistent about example plugin names
docs/deprecated: deprecate passing plugin args through `arg=`
tests/plugins/syscalls: adhere to new arg-passing scheme
tests/plugins/mem: introduce "track" arg and make args not positional
tests/plugins/insn: made arg inline not positional and parse it as bool
tests/plugins/bb: adapt to the new arg passing scheme
docs/tcg-plugins: new passing parameters scheme for cache docs
plugins/howvec: adapting to the new argument passing scheme
plugins/hwprofile: adapt to the new plugin arguments scheme
plugins/lockstep: make socket path not positional & parse bool arg
plugins/hotblocks: Added correct boolean argument parsing
plugins/hotpages: introduce sortby arg and parsed bool args correctly
plugins/api: added a boolean parsing plugin api
plugins: allow plugin arguments to be passed directly
docs/devel/tcg-plugins: added cores arg to cache plugin
plugins: sort exported symbol list
plugins/cache: supported multicore cache modelling
plugins: do not limit exported symbols if modules are active
gitlab-ci: Fix ..._RUNNER_AVAILABLE variables and document them
gitlab-ci: Remove superfluous "dnf install" statement
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
-----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEE+tTiv4cTddY0BRfETmYd3lg6lk4FAmEvZwgACgkQTmYd3lg6
lk6nCw//X5wVWFBHDw+7nQ3lpu/rYTVTdqzdwgcOih5ima4ZeqmRbEMGhKYHcekZ
YQxAP3r4k11Fp2Jev4CS18c4TVE/jYE7d8RwS5ROGTT8IOhe3Ntgd6d5MNjIdm86
HwaTmmrxpL2cCWUgCGX8H+BXT0p+sjNpMTXfgu9CYlYEgVQKVRiTBTEsCku12FRM
kwqHaFzJZoFMd45NhbH2wHt/dmDVuVYp7UuCM/HzNFKLO8E25sBLQip97RRTgInB
iT9vadTYsgkrdRbIWiQbP8vWKL4D0SS7Sw6DYlxTCYhEEZffiiXPVqEwf+qr9LRX
sLui6vMyjLB4yhjsg5AEd0IMZSP4H431su6YEuP0XOXG5yh5nSNkGVim0ezt1UBF
DDvYDumVK0P4seCVhK87fEejW9+GAlTSf65LBcK07JSo5DLyRzfmwBXQM3EKzdCK
y58Jthkmlhe4zym40WNwM91QFaNuWAD0pdvB9fa9OcidvuLgkhdgN72LJVgZSoq9
7UuWSV6laTnTAIP1YL4R5fvq1r5gNE1cnzCFf6th87pmvOUhO43Y2dT6Me8UR0v8
B7tHxtAiZJkfWvOYL4Jy3vaBXuivZCtEYUUDc0Y0Cmzfd9DnvnkxrKirZ6ECoyDs
RsR6nUO1tbpe0ekdl8EvYG3PRt8iHIahZ25GnKcUSTRFydetPqE=
=ec6M
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/a1xndr/tags/fuzz-pull-2021-09-01' into staging
Fuzzing Patches for 2021-09-01
# gpg: Signature made Wed 01 Sep 2021 12:42:00 BST
# gpg: using RSA key FAD4E2BF871375D6340517C44E661DDE583A964E
# gpg: Good signature from "Alexander Bulekov <alxndr@bu.edu>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: FAD4 E2BF 8713 75D6 3405 17C4 4E66 1DDE 583A 964E
* remotes/a1xndr/tags/fuzz-pull-2021-09-01:
MAINTAINERS: add fuzzing reviewer
MAINTAINERS: Add myself as a reviewer for Device Fuzzing
fuzz: unblock SIGALRM so the timeout works
fuzz: use ITIMER_REAL for timeouts
fuzz: add an instrumentation filter
fuzz: make object-name matching case-insensitive
fuzz: adjust timeout to allow for longer inputs
fuzz: fix sparse memory access in the DMA callback
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
- Make the backup-top filter driver available for user-created block
nodes (i.e. via blockdev-add)
- Allow running iotests with gdb or valgrind being attached to qemu
instances
- Fix the raw format driver's permissions: There is no metadata, so we
only need WRITE or RESIZE when the parent needs it
- Basic reopen implementation for win32 files (file-win32.c) so that
qemu-img commit can work
- uclibc/musl build fix for the FUSE export code
- Some iotests delinting
- block-hmp-cmds.c refactoring
-----BEGIN PGP SIGNATURE-----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=0tJJ
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/hreitz/tags/pull-block-2021-09-01' into staging
Block patches:
- Make the backup-top filter driver available for user-created block
nodes (i.e. via blockdev-add)
- Allow running iotests with gdb or valgrind being attached to qemu
instances
- Fix the raw format driver's permissions: There is no metadata, so we
only need WRITE or RESIZE when the parent needs it
- Basic reopen implementation for win32 files (file-win32.c) so that
qemu-img commit can work
- uclibc/musl build fix for the FUSE export code
- Some iotests delinting
- block-hmp-cmds.c refactoring
# gpg: Signature made Wed 01 Sep 2021 16:01:54 BST
# gpg: using RSA key CB62D7A0EE3829E45F004D34A1FA40D098019CDF
# gpg: issuer "hreitz@redhat.com"
# gpg: Good signature from "Hanna Reitz <hreitz@redhat.com>" [marginal]
# gpg: WARNING: This key is not certified with sufficiently trusted signatures!
# gpg: It is not certain that the signature belongs to the owner.
# Primary key fingerprint: CB62 D7A0 EE38 29E4 5F00 4D34 A1FA 40D0 9801 9CDF
* remotes/hreitz/tags/pull-block-2021-09-01: (56 commits)
block/file-win32: add reopen handlers
block/export/fuse.c: fix fuse-lseek on uclibc or musl
block/block-copy: block_copy_state_new(): drop extra arguments
iotests/image-fleecing: add test-case for copy-before-write filter
iotests/image-fleecing: prepare for adding new test-case
iotests/image-fleecing: rename tgt_node
iotests/image-fleecing: proper source device
iotests.py: hmp_qemu_io: support qdev
iotests: move 222 to tests/image-fleecing
iotests/222: constantly use single quotes for strings
iotests/222: fix pylint and mypy complains
python:QEMUMachine: template typing for self returning methods
python/qemu/machine: QEMUMachine: improve qmp() method
python/qemu/machine.py: refactor _qemu_args()
qapi: publish copy-before-write filter
block/copy-before-write: make public block driver
block/block-copy: make setting progress optional
block/copy-before-write: initialize block-copy bitmap
block/copy-before-write: cbw_init(): use options
block/copy-before-write: bdrv_cbw_append(): drop unused compress arg
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This commit makes the plugin adhere to the new plugins arg-passing
scheme by expecting full-form boolean args instead of short-form
booleans. This necessitates that we introduce a new argument, here
"track", to accept "r", "w", or "rw".
Also, it makes arguments not positional and we only care about the last
value specified for a certain argument.
callback/inline args are now supplied separately as bool arguments so
that both can be enabled individually.
Signed-off-by: Mahmoud Mandour <ma.mandourr@gmail.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20210730135817.17816-12-ma.mandourr@gmail.com>
Made argument "inline" not positional, this has two benefits. First is
that we adhere to how QEMU passes args generally, by taking the last
value of an argument and drop the others. And the second is that this
sets up a framework for potentially adding new args easily.
Signed-off-by: Mahmoud Mandour <ma.mandourr@gmail.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20210730135817.17816-11-ma.mandourr@gmail.com>
[AJB: fix check-tcg tests calling arg=inline]
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEuBi5yt+QicLVzsZrda1lgCoLQhEFAmEvbmcACgkQda1lgCoL
QhEmtggAgWR8p/4awhUoTscEkLBoilxJATTZBkxbN8NrRYmOIIn29QShhEDhvuG9
t6ch0DrJuSVMISTnMHtE5XJKBBD8vFS04SaD4Op8NgOyKTd2fQSXx6SyqgQVK0ui
zfZFjcjam9i+onIGVCSoUkGRL5GMOTougTh4SwMndR9sL9cn7lUQEJZbk7kS1II6
5r6uvKPtY4fyvxsi0wcHOYFSeajJfQOVZkav7JCnvuXiiCjQzZw2Aadsvrkmt3Y4
oaOTiOvYWJhNqFhWSuyY7gS4E4fjShwr3UuOcsmKUTu56Uf2GgdA9w4+AfZJQSxG
C1Vi+u5J8+oZzVHna9T1lRKQ5wLfCA==
=IprO
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/stefanberger/tags/pull-tpm-2021-09-01-1' into staging
Merge tpm 2021/09/01 v1
# gpg: Signature made Wed 01 Sep 2021 13:13:27 BST
# gpg: using RSA key B818B9CADF9089C2D5CEC66B75AD65802A0B4211
# gpg: Good signature from "Stefan Berger <stefanb@linux.vnet.ibm.com>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: B818 B9CA DF90 89C2 D5CE C66B 75AD 6580 2A0B 4211
* remotes/stefanberger/tags/pull-tpm-2021-09-01-1:
tests: acpi: tpm1.2: Add expected TPM 1.2 ACPI blobs
tests: acpi: Add test cases for TPM 1.2 with TCPA table
tests: Use QMP to check whether a TPM device model is available
tests: acpi: prepare for new TPM 1.2 related tables
tests: tpm: Create TPM 1.2 response in TPM emulator
tests: acpi: tpm2: Add the renamed ACPI files and drop old ones
tests: Add suffix 'tpm2' or 'tpm12' to ACPI table files
tests: acpi: Prepare for renaming of TPM2 related ACPI files
tests: Add tpm_version field to TPMTestState and fill it
tests: Rename TestState to TPMTestState
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
New fleecing method becomes available: copy-before-write filter.
Actually we don't need backup job to setup image fleecing. Add test
for new recommended way of image fleecing.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-Id: <20210824083856.17408-34-vsementsov@virtuozzo.com>
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
We are going to add a test-case with some behavior modifications. So,
let's prepare a function to be reused.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-Id: <20210824083856.17408-33-vsementsov@virtuozzo.com>
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
Actually target of backup(sync=None) is not a final backup target:
image fleecing is intended to be used with external tool, which will
copy data from fleecing node to some real backup target.
Also, we are going to add a test case for "push backup with fleecing",
where instead of exporting fleecing node by NBD, we'll start a backup
job from fleecing node to real backup target.
To avoid confusion, let's rename temporary fleecing node now.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-Id: <20210824083856.17408-32-vsementsov@virtuozzo.com>
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
Define scsi device to operate with it by qom-set in further patch.
Give a new node-name to source block node, to not look like device
name.
Job now don't want to work without giving explicit id, so, let's call
it "fleecing".
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-Id: <20210824083856.17408-31-vsementsov@virtuozzo.com>
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Message-Id: <20210824083856.17408-30-vsementsov@virtuozzo.com>
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
Give a good name to test file.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-Id: <20210824083856.17408-29-vsementsov@virtuozzo.com>
[hreitz: Adjust .gitlab-ci.d/buildtest.yml]
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
The file use both single and double quotes for strings. Let's be
consistent.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-Id: <20210824083856.17408-28-vsementsov@virtuozzo.com>
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
Here:
- long line
- move to new interface of vm.qmp() (direct passing dict), to avoid
mypy false-positive, as it thinks that unpacked dict is a positional
argument.
- extra parenthesis
- handle event_wait possible None value
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-Id: <20210824083856.17408-27-vsementsov@virtuozzo.com>
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
We are going to publish copy-before-write filter. So, user should be
able to create it with blockdev-add first, specifying both filtered and
target children. And then do blockdev-reopen, to actually insert the
filter where needed.
Currently, filter unshares write permission unconditionally on source
node. It's good, but it will not allow to do blockdev-add. So, let's
relax restrictions when filter doesn't have any parent.
Test output is modified, as now permission conflict happens only when
job creates a blk parent for filter node.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-Id: <20210824083856.17408-11-vsementsov@virtuozzo.com>
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
The timeout mechanism won't work if SIGALRM is blocked. This changes
unmasks SIGALRM when the timer is installed. This doesn't completely
solve the problem, as the fuzzer could trigger some device activity that
re-masks SIGALRM. However, there are currently no inputs on OSS-Fuzz
that re-mask SIGALRM and timeout. If that turns out to be a real issue,
we could try to hook sigmask-type calls, or use a separate timer thread.
Based-on: <20210713150037.9297-1-alxndr@bu.edu>
Signed-off-by: Alexander Bulekov <alxndr@bu.edu>
Reviewed-by: Darren Kenny <darren.kenny@oracle.com>
Using ITIMER_VIRTUAL is a bad idea, if the fuzzer hits a blocking
syscall - e.g. ppoll with a NULL timespec. This causes timeout issues
while fuzzing some block-device code. Fix that by using wall-clock time.
This might cause inputs to timeout sometimes due to scheduling
effects/ambient load, but it is better than bringing the entire fuzzing
process to a halt.
Based-on: <20210713150037.9297-1-alxndr@bu.edu>
Signed-off-by: Alexander Bulekov <alxndr@bu.edu>
Reviewed-by: Darren Kenny <darren.kenny@oracle.com>
We have some configs for devices such as the AC97 and ES1370 that were
not matching memory-regions correctly, because the configs provided
lowercase names. To resolve these problems and prevent them from
occurring again in the future, convert both the pattern and names to
lower-case, prior to checking for a match.
Suggested-by: Darren Kenny <darren.kenny@oracle.com>
Reviewed-by: Darren Kenny <darren.kenny@oracle.com>
Signed-off-by: Alexander Bulekov <alxndr@bu.edu>
Using a custom timeout is useful to continue fuzzing complex devices,
even after we run into some slow code-path. However, simply adding a
fixed timeout to each input effectively caps the maximum input
length/number of operations at some artificial value. There are two
major problems with this:
1. Some code might only be reachable through long IO sequences.
2. Longer inputs can actually be _better_ for performance. While the
raw number of fuzzer executions decreases with larger inputs, the
number of MMIO/PIO/DMA operation/second actually increases, since
were are speding proportionately less time fork()ing.
With this change, we keep the custom-timeout, but we renew it, prior to
each MMIO/PIO/DMA operation. Thus, we time-out only when a specific
operation takes a long time.
Reviewed-by: Darren Kenny <darren.kenny@oracle.com>
Signed-off-by: Alexander Bulekov <alxndr@bu.edu>
The code mistakenly relied on address_space_translate to store the
length remaining until the next memory-region. We care about this
because when there is RAM or sparse-memory neighboring on an MMIO
region, we should only write up to the border, to prevent inadvertently
invoking MMIO handlers within the DMA callback.
However address_space_translate_internal only stores the length until
the end of the MemoryRegion if memory_region_is_ram(mr). Otherwise
the *len is left unmodified. This caused some false-positive issues,
where the fuzzer found a way to perform a nested MMIO write through a
DMA callback on an [address, length] that started within sparse memory
and spanned some device MMIO regions.
To fix this, write to sparse memory in small chunks of
memory_access_size (similar to the underlying address_space_write code),
which will prevent accidentally hitting MMIO handlers through large
writes.
Signed-off-by: Alexander Bulekov <alxndr@bu.edu>
Reviewed-by: Darren Kenny <darren.kenny@oracle.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
We are going to convert backup_top to full featured public filter,
which can be used in separate of backup job. Start from renaming from
"how it used" to "what it does".
While updating comments in 283 iotest, drop and rephrase also things
about ".active", as this field is now dropped, and filter doesn't have
"inactive" mode.
Note that this change may be considered as incompatible interface
change, as backup-top filter format name was visible through
query-block and query-named-block-nodes.
Still, consider the following reasoning:
1. backup-top was never documented, so if someone depends on format
name (for driver that can't be used other than it is automatically
inserted on backup job start), it's a kind of "undocumented feature
use". So I think we are free to change it.
2. There is a hope, that there is no such users: it's a lot more native
to give a good node-name to backup-top filter if need to operate
with it somehow, and don't touch format name.
3. Another "incompatible" change in further commit would be moving
copy-before-write filter from using backing child to file child. And
this is even more reasonable than renaming: for now all public
filters are file-child based.
So, it's a risky change, but risk seems small and good interface worth
it.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-Id: <20210824083856.17408-6-vsementsov@virtuozzo.com>
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
Avoids a warning from pylint not to use open() outside of a
with-statement, and is ... probably more portable anyway. Not that I
think we care too much about running tests *on* Windows, but... eh.
Signed-off-by: John Snow <jsnow@redhat.com>
Message-Id: <20210720173336.1876937-3-jsnow@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
Silences a new pylint warning. The dangers of *not* doing this are
somewhat unclear; I believe the file object gets garbage collected
eventually, but possibly the way in which it happens is
non-deterministic. Maybe this is a valid warning, but if there are
consequences of not doing it, I am not aware of them at present.
Signed-off-by: John Snow <jsnow@redhat.com>
Message-Id: <20210720173336.1876937-2-jsnow@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
Using the flag -p, allow the qemu binary to print to stdout.
Also create the common function _close_qemu_log_file() to
avoid accessing machine.py private fields directly and have
duplicate code.
Signed-off-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-Id: <20210809090114.64834-16-eesposit@redhat.com>
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
