This will allow test cases to run command in qtest protocol. It's
write-only for now.
Signed-off-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-id: 1422586186-9925-4-git-send-email-famz@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
When the drive-mirror block job is completed, it will call bdrv_swap()
on the source and the target BDS; this should obviously not result in a
segmentation fault.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-id: 1423256778-3340-4-git-send-email-mreitz@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
The qemu process does not always need to be killed, just waiting for it
can be fine, too. This introduces a way to do so.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-id: 1423256778-3340-3-git-send-email-mreitz@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
This patch makes use of the Error object for nbd_receive_negotiate() so
that errors during negotiation look nicer.
Furthermore, this patch adds an additional error message if the received
magic was wrong, but would be correct for the other protocol version,
respectively: So if an export name was specified, but the NBD server
magic corresponds to an old handshake, this condition is explicitly
signaled to the user, and vice versa.
As these messages are now part of the "Could not open image" error
message, additional filtering has to be employed in iotest 083, which
this patch does as well.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
_make_test_img sets up an NBD server, _cleanup_test_img shuts it down;
thus, _cleanup_test_img has to be called before _make_test_img is
invoked another time.
Furthermore, the pipe through _filter_test_img was unnecessary;
_make_test_img already takes care of that.
And finally, a filter is added to _filter_img_info to replace
"nbd://127.0.0.1:10810" by "TEST_DIR/t.IMGFMT", since the former is the
way to express the full image path (normally the latter) for NBD tests.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
In case of NBD, _make_test_img starts a new NBD server. Therefore,
_cleanup_test_img (which shuts that server down) has to be invoked
before the next _make_test_img call in order to make 100 work for NBD.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
As of 8f9e835fd2, probing should be
disabled in the qemu-iotests (at least when using qemu-io). This broke
083's reference output (which consisted mostly of "Could not read image
for determining its format").
This patch fixes it.
Note that one case which failed before is now successful: Disconnect
after data. This is due to qemu having read twice before (once for
probing, once for the qemu-io read command), but only once now (the
qemu-io read command). Therefore, reading is successful (which is
correct).
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
These tests exercise error code paths in the QED image format. The
tests are very simple, they just prove that the error path exits
cleanly.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 1421065893-18875-3-git-send-email-stefanha@redhat.com
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Managing applications, like oVirt (http://www.ovirt.org), make extensive
use of thin-provisioned disk images.
To let the guest run smoothly and be not unnecessarily paused, oVirt sets
a disk usage threshold (so called 'high water mark') based on the occupation
of the device, and automatically extends the image once the threshold
is reached or exceeded.
In order to detect the crossing of the threshold, oVirt has no choice but
aggressively polling the QEMU monitor using the query-blockstats command.
This lead to unnecessary system load, and is made even worse under scale:
deployments with hundreds of VMs are no longer rare.
To fix this, this patch adds:
* A new monitor command `block-set-write-threshold', to set a mark for
a given block device.
* A new event `BLOCK_WRITE_THRESHOLD', to report if a block device
usage exceeds the threshold.
* A new `write_threshold' field into the `BlockDeviceInfo' structure,
to report the configured threshold.
This will allow the managing application to use smarter and more
efficient monitoring, greatly reducing the need of polling.
[Updated qemu-iotests 067 output to add the new 'write_threshold'
property. --Stefan]
[Changed g_assert_false() to !g_assert() to fix the build on older glib
versions. --Kevin]
Signed-off-by: Francesco Romani <fromani@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 1421068273-692-1-git-send-email-fromani@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This patch is necessary to suppress the "probed raw" warning when
running raw over nbd tests.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
There is a bug in the recently added sys.platform test, and we no longer
run python tests, because "linux2" is the value to compare here. So do a
prefix match. According to python doc [1], the way to use sys.platform
is "unless you want to test for a specific system version, it is
therefore recommended to use the following idiom":
if sys.platform.startswith('freebsd'):
# FreeBSD-specific code here...
elif sys.platform.startswith('linux'):
# Linux-specific code here...
[1]: https://docs.python.org/2.7/library/sys.html#sys.platform
Signed-off-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Test 064 reads a lot of data at once which currently results in qemu-io
having to allocate up to about 1 GB of memory (958 MB, to be exact).
This patch lowers that amount to 128 MB by making the test read smaller
chunks.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Jeff Cody <jcody@redhat.com>
Message-id: 1422025185-25229-1-git-send-email-mreitz@redhat.com
If I understand correctly, qemu-iotests never meant to be portable. We
only support Linux for all the shell cases, but didn't specify it for
python tests. Now add this and default all the python tests as Linux
only. If we cares enough later, we can override the parameter in
individual cases.
Signed-off-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Other cases have this, and this test is not portable as well, as we want
to add "make check-block" to "make check", it shouldn't fail on Mac OS
X.
Reported-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
The former is not portable because on Mac OSX it is /usr/bin/true.
Signed-off-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Filter out the "main loop: WARNING: I/O thread spun for..." warning from
qemu output (it hardly matters for code specifically testing I/O).
Furthermore, use _filter_qemu in all the custom functions which run
qemu.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This applies cases on drive-backup on blockdev-backup, except cases with
target format and mode.
Also add a case to check source == target.
Signed-off-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-id: 1418899027-8445-5-git-send-email-famz@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
Sometimes, qemu does not have a filename to work with, so it does not
know which directory to use for a backing file specified by a relative
filename. Add a test which tests that qemu exits with an appropriate
error message.
Additionally, add a test for qemu-img create with a backing filename
relative to the backed image's base directory while omitting the image
size.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Using /tmp, which is usually mounted as tmpfs, the quick group can be
quicker.
On my laptop (Lenovo T430s with Fedora 20), this reduces the time from
50s to 30s.
Signed-off-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This is simply:
$ cd tests/qemu-iotests; sed -i -e 's/ *$//' *.out
Signed-off-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-id: 1418110684-19528-2-git-send-email-famz@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Test 039 used qemu-io -c abort for simulating a qemu crash; however,
abort() generally results in a core dump and ulimit -c 0 is no reliable
way of preventing that. Use "sigraise $(kill -l KILL)" instead to have
it crash without a core dump.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Message-id: 1418032092-16813-4-git-send-email-mreitz@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
_filter_qemu_io already filters out the process ID when qemu-io is
aborted; the same should be done when it is killed.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Message-id: 1418032092-16813-3-git-send-email-mreitz@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Add a test for vmdk files which use a file with a JSON file name, and
which then try to open extents. That should fail and the error message
should at least try to look helpful.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Message-id: 1417615043-26174-3-git-send-email-mreitz@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
VMDK extent parsing code doesn't handle the JSON file name, so the case
fails for these subformats. Disabled them.
Signed-off-by: Fam Zheng <famz@redhat.com>
Message-id: 1417571370-19495-1-git-send-email-famz@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
qcow2_cache_flush() may fail; if one of the caches failed to be flushed
successfully to disk in qcow2_close() the image should not be marked
clean, and we should emit a warning.
This breaks the (qcow2-specific) iotests 026, 071 and 089; change their
output accordingly.
Cc: qemu-stable@nongnu.org
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Add a test for creating and amending images (amendment uses the creation
options) with formats not supporting creation over protocols not
supporting creation.
Cc: qemu-stable@nongnu.org
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
There may be NBD tests which do not create a sample image and simply
test whether wrong usage of the protocol is rejected as expected. In
this case, there will be no NBD server and trying to kill it during
clean-up will fail.
Cc: qemu-stable@nongnu.org
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
There are two instances of iotest 059 using qemu-io on a qcow2 image. As
of "qemu-iotests: Use qemu-io -f $IMGFMT" the iotests can no longer rely
on $QEMU_IO doing probing, therefore the qcow2 format has to be
specified explicitly here.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The real on-disk size of an image depends on things like the host
filesystem. _img_info already filters it out, use the function in 082.
Signed-off-by: Michael Mueller <mimu@linux.vnet.ibm.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The real on-disk size of an image depends on things like the host
filesystem. _img_info already filters it out, use the function in 060.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Michael Mueller <mimu@linux.vnet.ibm.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
If a qcow2 image specifies a backing file format that doesn't correspond
to any format driver that qemu knows, we shouldn't fall back to probing,
but simply error out.
Not looking up the backing file driver in bdrv_open_backing_file(), but
just filling in the "driver" option if it isn't there moves us closer to
the goal of having everything in QDict options and gets us the error
handling of bdrv_open(), which correctly refuses unknown drivers.
Cc: qemu-stable@nongnu.org
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-id: 1416935562-7760-4-git-send-email-kwolf@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The qcow2 specification requires that the header extension data be
padded to round up the extension size to the next multiple of 8 bytes.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-id: 1416935562-7760-3-git-send-email-kwolf@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
After reading the extension header, offset is incremented, but not
checked against end_offset any more. This way an integer overflow could
happen when checking whether the extension end is within the allowed
range, effectively disabling the check.
This patch adds the missing check and a test case for it.
Cc: qemu-stable@nongnu.org
Reported-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-id: 1416935562-7760-2-git-send-email-kwolf@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This is forbidden if the raw driver was probed.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-id: 1416497234-29880-10-git-send-email-kwolf@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The original intention was to pipe stderr of qemu into $fifo_out.
However, the redirections were specified in the wrong order for this.
This patch fixes it.
Now qemu's output on stderr can be retrieved with _send_qemu_cmd, which
applies several useful filters on the output that were missing before.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-id: 1416497234-29880-9-git-send-email-kwolf@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-id: 1416497234-29880-4-git-send-email-kwolf@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This patch changes $QEMU_IO so that all tests by default pass a format
argument to qemu-io.
There are a few cases where -f $IMGFMT is not wanted because it selects
the wrong driver or json: filenames including a driver are used. They
are changed to use $QEMU_IO_PROG, which doesn't include any options.
Tests 071 and 081 have output changes because now the actual request
fails instead of reading the 2k probing buffer.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-id: 1416497234-29880-3-git-send-email-kwolf@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
When which(1) is not installed, we would complain "perl not found"
because it's the first set_prog_path check. The error message is
wrong.
Fix it by using "command -v", a native way to query the existence of a
command.
Suggested-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 1416380832-9697-1-git-send-email-famz@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Add one test whether blkdebug is able to generate a plain filename if
given a configuration file and a file to be tested only; and add another
test whether blkdebug is able to do the same without being given a
configuration file.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 1415697825-26678-3-git-send-email-mreitz@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Instead of actually recreating the options from scratch, just reuse the
options given for creating the BDS, which are the configuration file
name and additional options. In case there are no additional options we
can thus create a plain filename.
This obviously results in a different output for qemu-iotest 099 which
exactly tests this filename generation. Fix it up as well.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 1415697825-26678-2-git-send-email-mreitz@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
067 invokes query-block, resulting in a reference output with really
long lines (which may pose a problem in email patches and always poses a
problem when the output changes, because it is hard to see what has
actually changed). Use -qmp-pretty to mitigate this issue.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
_filter_qmp should be able to correctly filter out the QMP version
object for pretty JSON output.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The block layer read and write functions do not like requests which are
bigger than INT_MAX bytes. Since the VDI bmap is read and written in a
single operation, its size is therefore limited accordingly. This
reduces the maximum VDI image size supported by QEMU to half of what it
currently is (down to approximately 512 TB).
The VDI test 084 has to be adapted accordingly. Actually, one could
clearly see that it was broken from the "Could not open
'TEST_DIR/t.IMGFMT': Invalid argument" line for an image which was
supposed to work just fine.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Peter Lieven <pl@kamp.de>
Test the error message when a COW file is about to be created which is
supposed to inherit the size of its backing file, while the backing file
given does not actually exist.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Peter Lieven <pl@kamp.de>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Add some tests for progress output to 061.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Benoît Canet <benoit.canet@nodalink.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Benoit Canet <benoit@irqsave.net>
Message-id: 1414404776-4919-8-git-send-email-mreitz@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
As discussed during review a follow up for Max's fix.
Signed-off-by: Peter Lieven <pl@kamp.de>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-id: 1414249537-29257-1-git-send-email-pl@kamp.de
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Add a test for qcow2's fast bdrv_make_empty implementation on images
without internal snapshots.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 1414159063-25977-15-git-send-email-mreitz@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
