The WHPX build is broken since commit 12e9493df92 which removed the
"hw/boards.h" where MachineState is declared:
$ ./configure \
--enable-hax --enable-whpx
$ make x86_64-softmmu/all
[...]
CC x86_64-softmmu/target/i386/whpx-all.o
target/i386/whpx-all.c: In function 'whpx_accel_init':
target/i386/whpx-all.c:1378:25: error: dereferencing pointer to
incomplete type 'MachineState' {aka 'struct MachineState'}
whpx->mem_quota = ms->ram_size;
^~
make[1]: *** [rules.mak:69: target/i386/whpx-all.o] Error 1
CC x86_64-softmmu/trace/generated-helpers.o
make[1]: Target 'all' not remade because of errors.
make: *** [Makefile:471: x86_64-softmmu/all] Error 2
Restore this header, partially reverting commit 12e9493df92.
Fixes: 12e9493df92
Reported-by: Ilias Maratos <i.maratos@gmail.com>
Reviewed-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20190920113329.16787-2-philmd@redhat.com>
Remove a redundant masking of ignore. Once that's gone it is
obvious that the system-mode inner test is redundant with the
outer test. Move the fpcr_exc_enable masking up and tidy.
No functional change.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20190921043256.4575-8-richard.henderson@linaro.org>
The kernel masks the integer overflow exception with the
software invalid exception mask. Include IOV in the set
of exception bits masked by fpcr_exc_enable.
Fixes the new float_convs test.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20190921043256.4575-7-richard.henderson@linaro.org>
Tidy the computation of the value; no functional change.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20190921043256.4575-6-richard.henderson@linaro.org>
Since we're converting the swcr to fpcr format for exceptions,
it's trivial to add FPCR_DNZ to the set of fpcr bits overriden.
No functional change.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20190921043256.4575-5-richard.henderson@linaro.org>
The CONFIG_USER_ONLY adjustment blindly mashed the swcr
exception enable bits into the fpcr exception disable bits.
However, fpcr_exc_enable has already converted the exception
disable bits into the exception status bits in order to make
it easier to mask status bits at runtime.
Instead, merge the swcr enable bits with the fpcr before we
convert to status bits.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20190921043256.4575-4-richard.henderson@linaro.org>
We were setting the wrong bit. The fp_status.flush_to_zero
setting is overwritten by either the constant 1 or the value
of fpcr_flush_to_zero depending on bits within an fp insn.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20190921043256.4575-3-richard.henderson@linaro.org>
This is a bit more straight-forward than using a switch statement.
No functional change.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20190921043256.4575-2-richard.henderson@linaro.org>
Each operand can have a maximum length of 16. Make sure to prepare all
reads/writes before writing.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: David Hildenbrand <david@redhat.com>
Access at most single pages and document why. Using the access helpers
might over-indicate watchpoints within the same page, I guess we can
live with that.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: David Hildenbrand <david@redhat.com>
We can process a maximum of 256 bytes, crossing two pages.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: David Hildenbrand <david@redhat.com>
We can process a maximum of 256 bytes, crossing two pages.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: David Hildenbrand <david@redhat.com>
We can process a maximum of 256 bytes, crossing two pages. Calculate the
accessed range upfront - src is accessed right-to-left.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: David Hildenbrand <david@redhat.com>
We can process a maximum of 256 bytes, crossing two pages.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: David Hildenbrand <david@redhat.com>
We can process a maximum of 256 bytes, crossing two pages. While at it,
increment the length once.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: David Hildenbrand <david@redhat.com>
We can process a maximum of 256 bytes, crossing two pages.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: David Hildenbrand <david@redhat.com>
The last remaining bit is padding with two bytes.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: David Hildenbrand <david@redhat.com>
The last remaining bit for MVC is handling destructive overlaps in a
fault-safe way.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: David Hildenbrand <david@redhat.com>
As we are moving between address spaces, we can use access_memmove()
without checking for destructive overlaps (especially of real storage
locations):
"Each storage operand is processed left to right. The
storage-operand-consistency rules are the same as
for MOVE (MVC), except that when the operands
overlap in real storage, the use of the common real-
storage locations is not necessarily recognized."
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: David Hildenbrand <david@redhat.com>
Replace fast_memmove() variants by access_memmove() variants, that
first try to probe access to all affected pages (maximum is two pages).
Introduce access_get_byte()/access_set_byte(). We might be able to speed
up memmove in special cases even further (do single-byte access, use
memmove() for remaining bytes in page), however, we'll skip that for now.
In MVCOS, simply always call access_memmove_as() and drop the TODO
about LAP. LAP is already handled in the MMU.
Get rid of adj_len_to_page(), which is now unused.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: David Hildenbrand <david@redhat.com>
Replace fast_memset() by access_memset(), that first tries to probe
access to all affected pages (maximum is two). We'll use the same
mechanism for other types of accesses soon.
Only in very rare cases (especially TLB_NOTDIRTY), we'll have to
fallback to ld/st helpers. Try to speed up that case as suggested by
Richard.
We'll rework most involved handlers soon to do all accesses via new
fault-safe helpers, especially MVC.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: David Hildenbrand <david@redhat.com>
Although we basically ignore the index all the time for CONFIG_USER_ONLY,
let's simply skip all the checks and always return MMU_USER_IDX in
cpu_mmu_index() and get_mem_index().
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: David Hildenbrand <david@redhat.com>
24 and 31-bit address space handling is wrong when it comes to storing
back the addresses to the register.
While at it, read gprs 0 implicitly.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: David Hildenbrand <david@redhat.com>
Bit position 32-55 of general register 0 must be zero.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: David Hildenbrand <david@redhat.com>
... and don't perform any move in case the length is zero.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: David Hildenbrand <david@redhat.com>
Triggered by a review comment from Richard, also MVCOS has a 32-bit
length in 24/31-bit addressing mode. Add a new helper.
Rename wrap_length() to wrap_length31().
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: David Hildenbrand <david@redhat.com>
Let's stay within single pages.
... and indicate cc=3 in case there is work remaining. Keep unicode
padding simple.
While reworking, properly wrap the addresses.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: David Hildenbrand <david@redhat.com>
We have to mask of any unused bits. While at it, document what exactly is
missing.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: David Hildenbrand <david@redhat.com>
Perform the checks documented in the PoP.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: David Hildenbrand <david@redhat.com>
Let's use the new helper, that also detects destructive overlaps when
wrapping.
We'll make the remaining code (e.g., fast_memmove()) aware of wrapping
later.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: David Hildenbrand <david@redhat.com>
Let's increment the length once.
While at it, cleanup the comment. The memset() example is given as a
programming note in the PoP, so drop the description.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: David Hildenbrand <david@redhat.com>
Process max 4k bytes at a time, writing back registers between the
accesses. The instruction is interruptible.
"For operands longer than 2K bytes, access exceptions are not
recognized for locations more than 2K bytes beyond the current location
being processed."
Note that on z/Architecture, 2k vs. 4k access cannot get differentiated as
long as pages are not crossed. This seems to be a leftover from ESA/390.
Simply stay within single pages.
MVCL handling is quite different than MVCLE/MVCLU handling, so split up
the handlers.
Defer interrupt handling, as that will require more thought, add a TODO
for that.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: David Hildenbrand <david@redhat.com>
We'll have to zero-out unused bit positions, so make sure to write the
addresses back.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: David Hildenbrand <david@redhat.com>
We have to zero out unused bits in 24 and 31-bit addressing mode.
Provide a new helper.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: David Hildenbrand <david@redhat.com>
We use the marker "-1" for "no exception". s390_cpu_do_interrupt() might
get confused by that.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: David Hildenbrand <david@redhat.com>
Since QEMU v2.10, the KVM acceleration does not work on older kernels
anymore since the code accidentally requires the KVM_CAP_DEVICE_CTRL
capability now - it should have been optional instead.
Instead of fixing the bug, we asked in the ChangeLog of QEMU 2.11 - 3.0
that people should speak up if they still need support of QEMU running
with KVM on older kernels, but seems like nobody really complained.
Thus let's make this official now and turn it into a proper error
message, telling the users to use at least kernel 3.15 now.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20190913091443.27565-1-thuth@redhat.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
The "access" arguments clash with a macro under Windows with MinGW:
CC m68k-softmmu/target/m68k/fpu_helper.o
target/m68k/fpu_helper.c: In function 'fmovem_predec':
target/m68k/fpu_helper.c:405:56: error: macro "access" passed 4 arguments,
but takes just 2
size = access(env, addr, &env->fregs[i], ra);
So this renames them access_fn.
Tested with:
./configure --target-list=m68k-softmmu
make -j8
Signed-off-by: KONRAD Frederic <frederic.konrad@adacore.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <1568296920-29939-1-git-send-email-frederic.konrad@adacore.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
While debugging an application with GDB the following might happen:
(gdb) return
Make xxx return now? (y or n) y
Could not fetch register "fflags"; remote failure reply 'E14'
This is because riscv_gdb_get_fpu calls riscv_csrrw_debug with a wrong csr
number (8). It should use the csr_register_map in order to reach the
riscv_cpu_get_fflags callback.
Signed-off-by: KONRAD Frederic <frederic.konrad@adacore.com>
Reviewed-by: Palmer Dabbelt <palmer@sifive.com>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
Use the TB_FLAGS_MSTATUS_FS macro when enabling floating point in the tb
flags.
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Palmer Dabbelt <palmer@sifive.com>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
This is meant to mask off the hypervisor bits, but a typo caused it to
mask MPP instead.
Fixes: 1f0419cb04 ("target/riscv: Allow setting mstatus virtulisation bits")
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
Use both the generic register name and ABI name for the general purpose
registers and floating point registers.
Signed-off-by: Atish Patra <atish.patra@wdc.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
This adds 'info mem' command for RISC-V, to show virtual memory
mappings that aids debugging.
Rather than showing every valid PTE, the command compacts the
output by merging all contiguous physical address mappings into
one block and only shows the merged block mapping details.
Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Acked-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Palmer Dabbelt <palmer@sifive.com>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
For RV32, the root page table's PPN has 22 bits hence its address
bits could be larger than the maximum bits that target_ulong is
able to represent. Use hwaddr instead.
Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
Update the Hypervisor CSR addresses to match the v0.4 spec.
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Palmer Dabbelt <palmer@sifive.com>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
Let's create a function that tests if floating point support is
enabled. We can then protect all floating point operations based on if
they are enabled.
This patch so far doesn't change anything, it's just preparing for the
Hypervisor support for floating point operations.
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Christophe de Dinechin <dinechin@redhat.com>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
Use the always-compiled trace events, remove the now unused
RISCV_DEBUG_PMP definition.
Note pmpaddr_csr_read() could previously do out-of-bound accesses
passing addr_index >= MAX_RISCV_PMPS.
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
