Many source files have doubled words (eg "the the", "to to",
and so on). Most of these can simply be removed, but a couple
were actual mis-spellings (eg "to to" instead of "to do").
There was even one triple word score "to to to" :-)
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
This reverts commit 830d70db69.
The interface isn't fully backwards-compatible, which is bad.
Let's redo this properly after 2.4.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
A few last minute PPC changes for 2.4:
- spapr: Update SLOF
- spapr: Fix a few bugs
- spapr: Preparation for hotplug
- spapr: Minor code cleanups
- linux-user: Add mftb handling
- kvm: Enable hugepage support with memory-backend-file
- mac99: Remove nonexistent interrupt pin (Mac OS 9 fix)
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.19 (GNU/Linux)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=+Uma
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/agraf/tags/signed-ppc-for-upstream' into staging
Patch queue for ppc - 2015-07-07
A few last minute PPC changes for 2.4:
- spapr: Update SLOF
- spapr: Fix a few bugs
- spapr: Preparation for hotplug
- spapr: Minor code cleanups
- linux-user: Add mftb handling
- kvm: Enable hugepage support with memory-backend-file
- mac99: Remove nonexistent interrupt pin (Mac OS 9 fix)
# gpg: Signature made Tue Jul 7 16:48:41 2015 BST using RSA key ID 03FEDC60
# gpg: Good signature from "Alexander Graf <agraf@suse.de>"
# gpg: aka "Alexander Graf <alex@csgraf.de>"
* remotes/agraf/tags/signed-ppc-for-upstream: (30 commits)
sPAPR: Clear stale MSIx table during EEH reset
sPAPR: Reenable EEH functionality on reboot
sPAPR: Don't enable EEH on emulated PCI devices
spapr-vty: Use TYPE_ definition instead of hardcoding
spapr_vty: lookup should only return valid VTY objects
spapr_pci: drop redundant args in spapr_[populate, create]_pci_child_dt
spapr_pci: populate ibm,loc-code
spapr_pci: enumerate and add PCI device tree
xics_kvm: Don't enable KVM_CAP_IRQ_XICS if already enabled
ppc: Update cpu_model in MachineState
spapr: Consolidate cpu init code into a routine
spapr: Reorganize CPU dt generation code
cpus: Add a macro to walk CPUs in reverse
spapr: Support ibm, lrdr-capacity device tree property
spapr: Consider max_cpus during xics initialization
Revert "hw/ppc/spapr_pci.c: Avoid functions not in glib 2.12 (g_hash_table_iter_*)"
spapr_iommu: translate sPAPRTCEAccess to IOMMUAccessFlags
spapr_iommu: drop erroneous check in h_put_tce_indirect()
spapr_pci: set device node unit address as hex
spapr_pci: encode class code including Prog IF register
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Add support for ibm,lrdr-capacity since this is needed by the guest
kernel to know about the possible hot-pluggable CPUs and Memory. With
this, pseries kernels will start reporting correct maxcpus in
/sys/devices/system/cpu/possible.
Also define the minimum hotpluggable memory size as 256MB.
Signed-off-by: Bharata B Rao <bharata@linux.vnet.ibm.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
[agraf: Fix compile error on 32bit hosts]
Signed-off-by: Alexander Graf <agraf@suse.de>
For pkts copied to the CPU (to be processed by guest driver), mark the Rx
descriptor with flag "OFFLOAD_FWD" to indicate device has already forwarded
pkt. The guest driver will use this indicator to avoid duplicate
forwarding in the guest OS.
Examples include bcast/mcast/unknown ucast pkts flooded to bridged ports.
We want to avoid both the device and the guest bridge driver flooding these
pkts, which would result in duplicates pkts on the wire. Packet sampling,
such as sFlow, can also use this technique to mark pkts for the guest OS to
record but otherwise drop.
Signed-off-by: Scott Feldman <sfeldma@gmail.com>
Message-id: 1435746792-41278-5-git-send-email-sfeldma@gmail.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Simplifies multiseat configuration, see
docs/multiseat.txt update for details.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Add ROCKER_TLV_CMD_PORT_SETTINGS_PHYS_NAME to port settings. This attribute
exports the port name to the guest OS allowing it to name interfaces with
sensible defaults.
Mostly done by Scott for phys_id support; adapted to phys_name by David.
Signed-off-by: Scott Feldman <sfeldma@gmail.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
Message-id: 1433985681-56138-2-git-send-email-sfeldma@gmail.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Allow user supplied files to be inserted into the fw_cfg
device before starting the guest. Since fw_cfg_add_file()
already disallows duplicate fw_cfg file names, qemu will
exit with an error message if the user supplies multiple
blobs with the same fw_cfg file name, or if a blob name
collides with a fw_cfg name programmatically added from
within the QEMU source code. A warning message will be
printed if the fw_cfg item name does not begin with the
prefix "opt/", which is recommended for external, user
provided blobs.
Signed-off-by: Gabriel Somlo <somlo@cmu.edu>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
This adds a general overview of hotplug/dynamic-reconfiguration
for sPAPR/pSeries guest.
As specified in PAPR+ v2.7.
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Alexander Graf <agraf@suse.de>
Based on patch by Nikolay Nikolaev:
Vhost-user will implement the multi queue support in a similar way
to what vhost already has - a separate thread for each queue.
To enable the multi queue functionality - a new command line parameter
"queues" is introduced for the vhost-user netdev.
Signed-off-by: Nikolay Nikolaev <n.nikolaev@virtualopensystems.com>
Signed-off-by: Changchun Ouyang <changchun.ouyang@intel.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This is the register programming guide for the Rocker device. It's intended
for driver writers and device writers. It covers the device's PCI space,
the register set, DMA interface, and interrupts.
Signed-off-by: Scott Feldman <sfeldma@gmail.com>
Signed-off-by: Jiri Pirko <jiri@resnulli.us>
Message-id: 1426306173-24884-4-git-send-email-sfeldma@gmail.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
- implements QEMU hardware part of memory hot unplug protocol
described at "docs/spec/acpi_mem_hotplug.txt"
- handles memory remove notification event
- handles device eject notification
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Zhu Guihua <zhugh.fnst@cn.fujitsu.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
0 bit in Memory device control fields must be cleared before writing to
register. But now this field isn't cleared when other fields are written.
To solve this bug, This patch fixes UpdateRule to WriteAsZeros in "Memory
device control fields" register.
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Zhu Guihua <zhugh.fnst@cn.fujitsu.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Add specification about how to use memory hot unplug, and add
a flow diagram to explain memory hot unplug process.
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Zhu Guihua <zhugh.fnst@cn.fujitsu.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This document covers the guest-side hardware interface, as
well as the host-side programming API of QEMU's firmware
configuration (fw_cfg) device.
Signed-off-by: Jordan Justen <jordan.l.justen@intel.com>
Signed-off-by: Gabriel Somlo <somlo@cmu.edu>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
I am using qemu for teaching the Linux kernel at our university. I
wrote a simple PCI device that can answer to writes/reads, generate
interrupts and perform DMA. As I am dragging it locally over 2 years,
I am sending it to you now.
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
[Fix 32-bit compilation. - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The rocker device uses same PCI device ID as sdhci. Since rocker device driver
has already been accepted into Linux 3.18, and REDHAT_SDHCI device ID isn't
used by any drivers, it's safe to move REDHAT_SDHCI device ID, avoiding
conflict with rocker.
Signed-off-by: Scott Feldman <sfeldma@gmail.com>
Signed-off-by: Jiri Pirko <jiri@resnulli.us>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Specify the upper limit of refcount_order to be 6 (that is,
refcount_bits = 64). Any larger value does not make much sense when all
offsets, sizes, cluster counts etc. "only" have a width of 64 bit as
well, and very large values would be very difficult to support.
Therefore, just cap it at the largest reasonable value.
Suggested-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
A refblock entry may have a different size than 16 bits, it may even be
smaller than a byte. Correct the refcount_block_entries calculation
accordingly.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Add a qemu extented register range to the standard vga mmio bar.
Right nowe there are two registers: One readonly register returning the
size of the region (so we can easily add more registers there if needed)
and one endian control register, so guests (especially ppc) can flip
the framebuffer endianness as they need it.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
The current version of the qcow2 specification recommends to save the backing
file name in the end of the first cluster. It follows that the backing file
name can be saved somewhere in the image, but the first cluster, which
contradicts the current QEMU implementation.
The patch makes the backing file name required to be placed after the header
extensions in the first image cluster.
Signed-off-by: Maria Kustova <maria.k@catit.be>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Old code was affected by memory gaps which resulted in buffer pointers
pointing to address outside of the mapped regions.
Here we are introducing following changes:
- new function qemu_get_ram_block_host_ptr() returns host pointer
to the ram block, it is needed to calculate offset of specific
region in the host memory
- new field mmap_offset is added to the VhostUserMemoryRegion. It
contains offset where specific region starts in the mapped memory.
As there is stil no wider adoption of vhost-user agreement was made
that we will not bump version number due to this change
- other fileds in VhostUserMemoryRegion struct are not changed, as
they are all needed for usermode app implementation
- region data is not taken from ram_list.blocks anymore, instead we
use region data which is alredy calculated for use in vhost-net
- Now multiple regions can have same FD and user applicaton can call
mmap() multiple times with the same FD but with different offset
(user needs to take care for offset page alignment)
Signed-off-by: Damjan Marion <damarion@cisco.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Damjan Marion <damarion@cisco.com>
This document describes the basic message format used by vhost-user
for communication over a unix domain socket. The protocol is based
on the existing ioctl interface used for the kernel version of vhost.
Signed-off-by: Antonios Motakis <a.motakis@virtualopensystems.com>
Signed-off-by: Nikolay Nikolaev <n.nikolaev@virtualopensystems.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
- implements QEMU hardware part of memory hotplug protocol
described at "docs/specs/acpi_mem_hotplug.txt"
- handles only memory add notification event for now
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The 'refcount_bits' term used in the description of refcount block entry is
not defined in the specification. The definition is added in the
'refcount_order' section where refcount_bits was used as 'width in bits'.
Signed-off-by: Maria Kustova <maria.k@catit.be>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Add a standard vga variant which doesn't occupy any legacy
resources and thus can easily be used as secondary (or legacy-free)
graphics adapter. Programming must be done using the MMIO bar.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
.. use IO port 0cd8-0xcf7 range for CPU present bitmap
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The qcow2 specification does not explicitly state so far that every
snapshot table entry is aligned to 8 bytes. QEMU, in contrast, does this
alignment, thus it should be properly documented (which this patch
does).
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Reviewd-By: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
This adds an incompatible bit indicating corruption to qcow2. Any image
with this bit set may not be written to unless for repairing (and
subsequently clearing the bit if the repair has been successful).
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
* introduce processor status bitmask visible to guest at 0xaf00 addr,
where ACPI asl code expects it
* set bit corresponding to APIC ID in processor status bitmask on
receiving CPU hot-plug notification
* trigger CPU hot-plug SCI, to notify guest about CPU hot-plug event
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
# By Paolo Bonzini (5) and others
# Via Paolo Bonzini
* bonzini/scsi-next:
vhost-scsi-s390: new device supporting the tcm_vhost Linux kernel module
vhost-scsi-ccw: new device supporting the tcm_vhost Linux kernel module
vhost-scsi-pci: new device supporting the tcm_vhost Linux kernel module
vhost-scsi: new device supporting the tcm_vhost Linux kernel module
virtio: simplify Makefile conditionals
virtio-scsi: create VirtIOSCSICommon
vhost: Add vhost_commit callback for SeaBIOS ROM region re-mapping
scsi: VMWare PVSCSI paravirtual device implementation
scsi: avoid assertion failure on VERIFY command
Message-id: 1366381460-6041-1-git-send-email-pbonzini@redhat.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Signed-off-by: Dmitry Fleytman <dmitry@daynix.com>
Signed-off-by: Yan Vugenfirer <yan@daynix.com>
[ Rename files to vmw_pvscsi, fix setting of hostStatus in
pvscsi_request_cancelled - Paolo ]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This device is used for kvm unit tests,
currently it supports testing performance of ioeventfd.
Using updated kvm unittest, here's an example output:
mmio-no-eventfd:pci-mem 8796
mmio-wildcard-eventfd:pci-mem 3609
mmio-datamatch-eventfd:pci-mem 3685
portio-no-eventfd:pci-io 5287
portio-wildcard-eventfd:pci-io 1762
portio-datamatch-eventfd:pci-io 1777
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Due to disagreement on a name that is generic enough for hw/pci/pci.h,
the symbolic constants are placed in the .c files.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Some devices were missing, and we're using two PCI vendor ids.
This patch only adds devices that are already documented in hw/pci/pci.h.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The bochs dispi interface traditionally uses port 0x1ce as 16bit index
register and port 0x1cf as 16bit data register. The later is unaligned,
and probably for that reason the the data register was moved to 0x1d0
for non-x86 archs.
This patch makes the data register available at 0x1d0 on x86 too. The
old x86 location is kept for compatibility reasons, so both 0x1cf and
0x1d0 can be used as data register on x86.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
These wrong spellings were detected by codespell:
* successully -> successfully
* alot -> a lot
* wanna -> want to
* infomation -> information
* occured -> occurred
["also is" -> "is also" and "ressources" -> "resources" suggested by
Peter Maydell <peter.maydell@linaro.org>]
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
