Add a flag to EHCIPCIInfo saying whenever the controller supports
companions or not. Make sure we only allow registering companions for
ehci versions supporting that. Enable pci hotplug for the ehci
variants not supporting companions.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
since hotunplug the ehci host adapter, we should
delete vm_change_state_handler also, so the
VMChangeStateEntry should be saved in EHCIState.
Signed-off-by: Gonglei <arei.gonglei@huawei.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
imitate nearby code about using '!value' or 'value == NULL'
Signed-off-by: Gonglei <arei.gonglei@huawei.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
After previous Peter patch, they are redundant. This way we don't
assign them except when needed. Once there, there were lots of case
where the ".fields" indentation was wrong:
.fields = (VMStateField []) {
and
.fields = (VMStateField []) {
Change all the combinations to:
.fields = (VMStateField[]){
The biggest problem (appart from aesthetics) was that checkpatch complained
when we copy&pasted the code from one place to another.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Bugfixes for uas emulation.
Add remote wakeup support for ehci.
Add suspend support for xhci.
Misc minor tweaks and fixes.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.22 (GNU/Linux)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=2yvC
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'kraxel/tags/pull-usb-1' into staging
Improvements for usb3 bulk stream (usb core, xhci).
Bugfixes for uas emulation.
Add remote wakeup support for ehci.
Add suspend support for xhci.
Misc minor tweaks and fixes.
# gpg: Signature made Thu 28 Nov 2013 11:44:49 PM PST using RSA key ID D3E87138
# gpg: Can't check signature: public key not found
# By Hans de Goede (11) and others
# Via Gerd Hoffmann
* kraxel/tags/pull-usb-1:
usb: move usb_{hi,lo} helpers to header file.
usb: add vendor request defines
trace-events: Clean up after removal of old usb-host code
Revert "usb-tablet: Don't claim wakeup capability for USB-2 version"
ehci: implement port wakeup
xhci: Call usb_device_alloc/free_streams
usb: Add usb_device_alloc/free_streams
usb: Add max_streams attribute to endpoint info
uas: s/ui/iu/
uas: Fix response iu struct definition
uas: Bounds check tags when using streams
uas: Streams are numbered 1-y, rather then 0-x
uas: Fix / cleanup usb_uas_task error handling
uas: Only use report iu-s for task_mgmt status reporting
scsi: Add 2 new sense codes needed by uas
xhci: add support for suspend/resume
xhci: Add a few missing checks for disconnected devices
Message-id: 1385712381-30918-1-git-send-email-kraxel@redhat.com
Signed-off-by: Anthony Liguori <aliguori@amazon.com>
This reduces the dependencies on trace.h.
Only one source file which needs hcd-ehci.h also needs trace.h.
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Update portsc register and raise irq in case a suspended
port is woken up, so remote wakeup works on our ehci ports.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
To be passed to qbus_create_inplace().
Use DEVICE() cast to avoid a direct parent field access.
Reviewed-by: Wenchao Xia <xiawenc@linux.vnet.ibm.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
This is an autogenerated patch using scripts/switch-timer-api.
Switch the entire code base to using the new timer API.
Note this patch may introduce some line length issues.
Signed-off-by: Alex Bligh <alex@alex.org.uk>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
The macro g_assert_not_reached is a better self documenting replacement
for assert(0) or assert(false).
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Replace PORTSC macros with variables which could then be
configured in ehci_xxxx_class_init(...)
Signed-off-by: Kuo-Jung Su <dantesu@faraday-tech.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
This makes the mem MemoryRegion available to derived instance_inits.
Keep the bus in realize for now since naming breaks in instance_init.
Signed-off-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
The SysBus qdev initfn merely calls SysBusDeviceClass::init, so we can
replace it with a realizefn already. This avoids getting into any initfn
ambiguity with the upcoming Faraday EHCI implementation.
Rename internal usb_ehci_initfn() to usb_ehci_realize() to allow to
return Errors from common initialization code as well.
Signed-off-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
The DMAContext is a simple pointer to an AddressSpace that is now always
already available. Make everyone hold the address space directly,
and clean up the DMA API to use the AddressSpace directly.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
With pipelining it is possible to encounter a finished packet when cleaning
the queue due to a halt. This happens when a non stall error happens while
talking to a real device. In this case the queue on the usb-host side will
continue processing packets, and we can have completed packets waiting in
the queue after an error condition packet causing a halt.
There are 2 reasons to discard the completed packets at this point, rather
then trying to writing them back to the guest:
1) The guest expect to be able to cancel and/or change packets after the
packet with the error without doing an unlink, so writing them back may
confuse the guest.
2) Since the queue does not advance when halted, the writing back of these
packets will fail anyways since p->qtdaddr != q->qtdaddr, so the
ehci_verify_qtd call in ehci_writeback_async_complete_packet will fail.
Note that 2) means that then only functional change this patch introduces
is the printing of a warning when this scenario happens.
Note that discarding these packets means that the guest driver and the device
will get out of sync! This is unfortunate, but should not be a problem since
with a non stall error (iow an io-error) the 2 are out of sync already anyways.
Still this patch adds a warning to signal this happening.
Note that sofar this has only been seen with a DVB-T receiver, which gives
of a MPEG-2 stream, which allows for recovering from lost packets, see:
https://bugzilla.redhat.com/show_bug.cgi?id=890320
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
This patch adds support for usb3 streams to the usb subsystem core.
This is just adding a streams field / parameter in a number of places.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Coverity worries the EHCIQueue pointer could be null when we pass it
to functions that reference it. The state machine ensures it can't be
null then. Assert that, to hush the checker.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Some usb devices (host or network redirection) can benefit from knowing when
the guest stops using an endpoint. Redirection may involve submitting packets
independently from the guest (in combination with a fifo buffer between the
redirection code and the guest), to ensure that buffers of the real usb device
are timely emptied. This is done for example for isoc traffic and for interrupt
input endpoints. But when the (re)submission of packets is done by the device
code, then how does it know when to stop this?
For isoc endpoints this is handled by detecting a set interface (change alt
setting) command, which works well for isoc endpoints. But for interrupt
endpoints currently the redirection code never stops receiving data from
the device, which is less then ideal.
However the controller emulation is aware when a guest looses interest, as
then the qh for the endpoint gets unlinked (ehci, ohci, uhci) or the endpoint
is explicitly stopped (xhci). This patch adds a new ep_stopped USBDevice
method and modifies the hcd code to call this on queue unlink / ep stop.
This makes it possible for the redirection code to properly stop receiving
interrupt input (*) data when the guest no longer has interest in it.
*) And in the future also buffered bulk input.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
ehci_raise_irq(s, USBSTS_PCD), gets applied immediately so there is no need
to call commit_irq after it.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
I tried lowering the time between raising an interrupt and rescanning the
async schedule to see if the guest has queued a new transfer before, but
that did not have any positive effect. I now believe the cause for this is
that lowering this time made it more likely to hit the 1 ms interrupt
threshold penalty for the next packet, as described in my
"ehci: Use uframe precision for interrupt threshold checking" commit.
Now that we do interrupt threshold handling with uframe precision, futher
lowering this time from .5 to .25 ms gives an extra 15% improvement in speed
(MB/s) reading from a simple USB-2.0 thumb-drive.
While at it also properly set the int_req_by_async flag for short packet
completions.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Before this patch, the following could happen:
1) Transfer completes, raises interrupt
2) .5 ms later we check if the guest has queued up any new transfers
3) We find and execute a new transfer
4) .2 ms later the new transfer completes
5) We re-run our frame_timer to write back the completion, but less then
1 ms has passed since our last run, so frindex is not changed, so the
interrupt threshold code delays the interrupt
6) 1 ms from the re-run our frame-timer runs again and finally delivers
the interrupt
This leads to unnecessary large delays of interrupts, this code fixes this
by changing frindex to uframe precision and using that for interrupt threshold
control, making the interrupt fire at step 5 for guest which have low interrupt
threshold settings (like Linux).
Note that the guest still sees the frindex move in steps of 8 for migration
compatibility.
This boosts Linux read speed of a simple cheap USB thumb drive by 6 %.
Changes in v2:
-Make the guest see frindex move in steps of 8 by modifying ehci_opreg_read,
rather then using a shadow variable
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
ehci_fill_queue assumes that there is a one on one relationship between an ep
and a qh, this patch adds a check to ensure this.
Note I don't expect this to ever trigger, this is just something I noticed
the guest might do while working on other stuff. The only way this check can
trigger is if a guest mixes in and out qtd-s in a single qh for a non
control ep.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Remove the short-circuiting of fetchqtd in fetchqh, so that the
qtd gets properly verified before completing the transaction.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
This is not allowed, except for clearing active on cancellation, so don't
warn when the new token does not have its active bit set.
This unifies the cancellation path for modified qtd-s, and prepares
ehci_verify_qtd to be used ad an extra check inside
ehci_writeback_async_complete_packet().
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Also drop the warning printf, which was there mainly because this was an
untested code path (as the previous bug fixes to it show), but that no
longer is the case now :)
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Lower the timer freq if no iso schedule packets complete for 64 frames in
a row.
We can safely do this, without adding latency, because:
1) If there is isoc traffic this will never trigger
2) For async handled interrupt packets (only usb-host), the completion handler
will immediately schedule the frame_timer from a bh
3) All devices using NAK to signal no data for interrupt endpoints now use
wakeup, which will immediately schedule the frame_timer from a bh
The advantage of this is that when we only have interrupt packets in the
periodic schedule, async_stepdown can do its work and significantly lower
the frequency at which the frame_timer runs.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Starting with commit 1c380f9460 dma
transfers can actually fail. This patch makes ehci keep track
of the busmaster bit in pci config space, by setting/clearing the
dma_context pointer. Attempts to dma without context will result
in raising HSE (Host System Error) interrupt and stopping the host
controller.
This patch fixes WinXP not booting with a usb stick attached to ehci.
Root cause is seabios activating ehci so you can boot from the stick,
and WinXP clearing the busmaster bit before resetting the host
controller, leading to ehci actually trying dma while it is disabled.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
While testing the move to async packet handling for interrupt endpoints I
noticed that Windows-XP likes to play tricks with the next pointer for
periodic qh-s, so we should not fail qh / qtd verification when it changes.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Windows links interrupt qtd-s in circles, which means that when interrupt
endpoints return USB_RET_ASYNC, combined with the recent
"ehci: Retry to fill the queue while waiting for td completion" patch,
we keep adding the tds to the queue over and over again, as we detect the
circle from fill_queue, but we call it over and over again ...
This patch fixes this by changing the circle detection to also detect
circling into tds already queued up previously.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
This avoids the q->qtdaddr == p->qtdaddr asserts we have triggering, when
a queue contains multiple completed packages when we cancel the queue.
I triggered this with windows7 + async interrupt endpoint handling (*)
+ not detecting circles in ehci_fill_queue() properly, which makes the qtd
validation in ehci_fill_queue fail, causing cancellation of the queue on every
mouse event ...
*) Which is not going upstream as it will cause loss of interrupt events on
migration.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
ehci_state_writeback() will free the packet, so we should not access
the packet after calling ehci_state_writeback().
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Instead make ehci_execute and ehci_fill_queue return the again value.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Since with the ehci and xhci controllers a single packet can be larger
then maxpacketsize, it is possible for the result of a single packet
to be both having transferred some data as well as the transfer to have
an error.
An example would be an input transfer from a bulk endpoint successfully
receiving 1 or more maxpacketsize packets from the device, followed
by a packet signalling halt.
While already touching all the devices and controllers handle_packet /
handle_data / handle_control code, also change the return type of
these functions to void, solely storing the status in the packet. To
make the code paths for regular versus async packet handling more
uniform.
This patch unfortunately is somewhat invasive, since makeing the qemu
usb core deal with this requires changes everywhere. This patch only
prepares the usb core for this, all the hcd / device changes are done
in such a way that there are no functional changes.
This patch has been tested with uhci and ehci hcds, together with usb-audio,
usb-hid and usb-storage devices, as well as with usb-redir redirection
with a wide variety of real devices.
Note that there is usually no need to directly set packet->actual_length
form devices handle_data callback, as that is done by usb_packet_copy()
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Guard against re-definition of EHCI_DEBUG. Allows for turning on of debug info
from configure (using --qemu-extra-cflags="-DEHCI_DEBUG=1") rather than source
code hacking.
Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Seperate the PCI stuff from the EHCI components. Extracted the PCIDevice
out into a new wrapper struct to make EHCIState non-PCI-specific. Seperated
tho non PCI init component out into a seperate "common" init function.
Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
