As the virtio-serial-pci and virtio-serial-s390 are switched to the new
API, we can use QOM casts.
Signed-off-by: KONRAD Frederic <fred.konrad@greensocs.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Tested-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Acked-by: Amit Shah <amit.shah@redhat.com>
Message-id: 1365512016-21944-7-git-send-email-fred.konrad@greensocs.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This remove old init and exit function as they are no longer needed.
Signed-off-by: KONRAD Frederic <fred.konrad@greensocs.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Tested-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Acked-by: Amit Shah <amit.shah@redhat.com>
Message-id: 1365512016-21944-6-git-send-email-fred.konrad@greensocs.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Here the virtio-serial-ccw is modified for the new API. The device
virtio-serial-ccw extends virtio-ccw-device as before. It creates and
connects a virtio-serial during the init. The properties are not modified.
Signed-off-by: KONRAD Frederic <fred.konrad@greensocs.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Tested-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Acked-by: Amit Shah <amit.shah@redhat.com>
Message-id: 1365512016-21944-5-git-send-email-fred.konrad@greensocs.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Here the virtio-serial-s390 is modified for the new API. The device
virtio-serial-s390 extends virtio-s390-device as before. It creates and
connects a virtio-serial during the init. The properties are not
modified.
Signed-off-by: KONRAD Frederic <fred.konrad@greensocs.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Tested-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Acked-by: Amit Shah <amit.shah@redhat.com>
Message-id: 1365512016-21944-4-git-send-email-fred.konrad@greensocs.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Here the virtio-serial-pci is modified for the new API. The device
virtio-serial-pci extends virtio-pci. It creates and connects a
virtio-serial during the init. The properties are not changed.
Signed-off-by: KONRAD Frederic <fred.konrad@greensocs.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Tested-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Acked-by: Amit Shah <amit.shah@redhat.com>
Message-id: 1365512016-21944-3-git-send-email-fred.konrad@greensocs.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Create virtio-serial which extends virtio-device, so it can be connected
on virtio-bus.
Signed-off-by: KONRAD Frederic <fred.konrad@greensocs.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Tested-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Acked-by: Amit Shah <amit.shah@redhat.com>
Message-id: 1365512016-21944-2-git-send-email-fred.konrad@greensocs.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This fix the broken aliases, by renaming the devices.
So: * virtio-blk => virtio-blk-device.
* virtio-balloon => virtio-balloon-device.
* virtio-scsi => virtio-scsi-device.
All virtio-*-pci, virtio-*-s390, virtio-*-ccw didn't change.
Signed-off-by: KONRAD Frederic <fred.konrad@greensocs.com>
Message-id: 1365501888-14602-1-git-send-email-fred.konrad@greensocs.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Commit c45e5b5b30 made a switch use the efi-enabled nic roms by default.
This patch updates the Makefile to install the roms so they can actually be used.
Signed-off-by: Sander Eikelenboom <linux@eikelenboom.it>
Message-id: 1365455293-7084-1-git-send-email-linux@eikelenboom.it
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Headers shouldn't assume another header is included,
pull in everything necessary.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Message-id: 20130415081250.GA7374@redhat.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
The operands for MAQ_SA_W.PHL/MAQ_SA_W.PHR must in specified format.
Otherwise, the results are unpredictable. Once the operands were corrected
in the tests (part of this change), a bug in mipsdsp_mul_q15_q15 became
visible.
This change corrects the tests for MAQ_SA_W.PHL/MAQ_SA_W.PHR and fixes
sign-related issue in mipsdsp_mul_q15_q15. It also removes unnecessary
comment.
Signed-off-by: Petar Jovanovic <petar.jovanovic@imgtec.com>
In handling float64_muladd, if we end up doing a subtraction of the
product and c, and the 128 bit result of this subtraction happens to
have its most significant bit in bit 63, we weren't handling this
correctly when attempting to normalize to put the most significant
bit into bit 126. We would end up doing a right shift by a negative
number (undefined behaviour in C) so at best we would return an
incorrect result to the guest. MSB in bit 63 has to be handled as a
special case separately from MSB in 0..62 and MSB in 63..126. (MSB
in 127 is not possible.)
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
A non-native i386 or x86_64 emulator should not have TPM passthrough
support, since the TPM is only present for those hosts.
Reviewed-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Headers shouldn't assume another header is included,
pull in everything necessary.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Functions defined in acpi/ should be declared in
acpi.h
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Commit 0434e30afb accidentally removed
the compilation of arm11mpcore.c.
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This is a regression introduced by c0907c9e64. How to reproduce:
$ qemu-system-x86_64 -nodefaults -vnc :0 -M q35
qemu-system-x86_64: Unknown device 'q35-pcihost' for default sysbus
Aborted (core dumped)
Tested-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Hu Tao <hutao@cn.fujitsu.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
virtio/dataplane/vring.c requires the Linux headers and is built for all
targets. So we need to add the corresponding include to QEMU_INCLUDES to
avoid that outdated distribution headers are used.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The recent rearrangement of include files had some minor errors:
devices.h is not ARM specific and should not be in arm/
arm.h should be in arm/
Move these two headers to correct this.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
* stefanha/block:
rbd: add an asynchronous flush
iotests: Add 'check -ssh' option to test Secure Shell block device.
block: ssh: Use libssh2_sftp_fsync (if supported by libssh2) to flush to disk.
block: Add support for Secure Shell (ssh) block device.
ide: refuse WIN_READ_NATIVE_MAX on empty device
qemu-iotests: filter QEMU_PROG in 051.out
qemu-iotests: Add test for -drive options
qemu-iotests: A few more bdrv_pread/pwrite tests
block: Introduce bdrv_pwritev() for qcow2_save_vmstate
savevm: Implement block_writev_buffer()
block: Introduce bdrv_writev_vmstate
Conflicts:
savevm.c
aliguori: add f->pos parameter to writev_buffer().
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
# By Michal Novotny (2) and Eric Blake (1)
# Via Luiz Capitulino
* luiz/queue/qmp:
qapi: use valid JSON in schema
Revert "New QMP command query-cpu-max and HMP command cpu_max"
New cpu-max field in query-machines QMP command output
Message-id: 1365775103-18737-1-git-send-email-lcapitulino@redhat.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
# By Paolo Bonzini
# Via Juan Quintela
* quintela/migration.next:
migration: simplify writev vs. non-writev logic
migration: drop is_write complications
migration: use a single I/O operation when writev_buffer is not defined
migration: set f->is_write and flush in add_to_iovec
Message-id: 1365512961-15623-1-git-send-email-quintela@redhat.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
The existing bdrv_co_flush_to_disk implementation uses rbd_flush(),
which is sychronous and causes the main qemu thread to block until it
is complete. This results in unresponsiveness and extra latency for
the guest.
Fix this by using an asynchronous version of flush. This was added to
librbd with a special #define to indicate its presence, since it will
be backported to stable versions. Thus, there is no need to check the
version of librbd.
Implement this as bdrv_aio_flush, since it matches other aio functions
in the rbd block driver, and leave out bdrv_co_flush_to_disk when the
asynchronous version is available.
Reported-by: Oliver Francke <oliver@filoo.de>
Signed-off-by: Josh Durgin <josh.durgin@inktank.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Note in order to run these tests on ssh, you must be running a local
ssh daemon, and that daemon must accept loopback connections, and
ssh-agent has to be set up to allow logins on the local daemon. In
other words, the following command should just work without demanding
any passphrase:
ssh localhost
Signed-off-by: Richard W.M. Jones <rjones@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
libssh2_sftp_fsync is an extension to libssh2 to support fsync(2) over
sftp, which is itself an extension of OpenSSH.
If both libssh2 and the ssh daemon support it, this will allow
bdrv_flush_to_disk to commit changes through to disk on the remote
server.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
qemu-system-x86_64 -drive file=ssh://hostname/some/image
QEMU will ssh into 'hostname' and open '/some/image' which is made
available as a standard block device.
You can specify a username (ssh://user@host/...) and/or a port number
(ssh://host:port/...). You can also use an alternate syntax using
properties (file.user, file.host, file.port, file.path).
Current limitations:
- Authentication must be done without passwords or passphrases, using
ssh-agent. Other authentication methods are not supported.
- Uses a single connection, instead of concurrent AIO with multiple
SSH connections.
This is implemented using libssh2 on the client side. The server just
requires a regular ssh daemon with sftp-server support. Most ssh
daemons on Unix/Linux systems will work out of the box.
Signed-off-by: Richard W.M. Jones <rjones@redhat.com>
Cc: Stefan Hajnoczi <stefanha@gmail.com>
Cc: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
What is the highest addressable sector on an empty CD-ROM? Nothing is
addressable so produce an error.
This patch prevents a divide-by-zero in ide_set_sector() since
s->sectors and s->heads would be 0. Not to mention that a sector=-1
argument would be nonsense.
Note that WIN_READ_NATIVE_MAX can be triggered using hdparm -N 1024
/dev/cdrom. The LBA bit will be set to 1 though, so the only easy way
to go down the ide_set_sector() CHS code path which divides by zero is
to comment out the s->select & 0x40 case for testing.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Filter the name of the QEMU executable so the output can be diffed no
matter what QEMU_PROG is (e.g. qemu-system-x86_64).
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Directly pass the QEMUIOVector on instead of linearising it.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Instead of breaking up RAM state into many small chunks, pass the iovec
to the block layer for better performance.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Known bugs in to_json():
* A start byte for a three-byte sequence followed by less than two
continuation bytes is split into one-byte sequences.
* Start bytes for sequences longer than three bytes get misinterpreted
as start bytes for three-byte sequences. Continuation bytes beyond
byte three become one-byte sequences.
This means all characters outside the BMP are decoded incorrectly.
* One-byte sequences with the MSB are put into the JSON string
verbatim when char is unsigned, producing invalid UTF-8. When char
is signed, they're replaced by "\\uFFFF" instead.
This includes \xFE, \xFF, and stray continuation bytes.
* Overlong sequences are happily accepted, unless screwed up by the
bugs above.
* Likewise, sequences encoding surrogate code points or noncharacters.
* Unlike other control characters, ASCII DEL is not escaped. Except
in overlong encodings.
My rewrite fixes them as follows:
* Malformed UTF-8 sequences are replaced.
Except the overlong encoding \xC0\x80 of U+0000 is still accepted.
Permits embedding NUL characters in C strings. This trick is known
as "Modified UTF-8".
* Sequences encoding code points beyond Unicode range are replaced.
* Sequences encoding code points beyond the BMP produce a surrogate
pair.
* Sequences encoding surrogate code points are replaced.
* Sequences encoding noncharacters are replaced.
* ASCII DEL is now always escaped.
The replacement character is U+FFFD.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Test cases cover the two noncharacters in the BMP. Add tests for the
other 64 noncharacters.
Three existing test cases involve noncharacters U+FFFF and U+10FFFF.
Instead of deleting them as now duplicates, adjust them to use U+FFFC
and U+10FFFFD.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
* 'mingw' of git://qemu.weilnetz.de/qemu:
qemu-timer: move timeBeginPeriod/timeEndPeriod to os-win32
Release SMP restriction on Windows
Ensure good ordering of memory instruction in cpu_exec
Check effective suspension of TCG thread
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Remove static attribute to Td[0-5] and Te[0-5] tables so that they
can be used outside of aes.c. Change their type from u32 to uint32_t,
to keep the u32 udef local to aes.c. Prefix them with AES_ so that they
do not conflict with other symbols.
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Move aes.h from include/block to include/qemu to show it can be reused
by other subsystems.
Cc: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
The PCLMULQDQ instruction has been introduced on the Westmere CPU.
Reviewed-by: Richard Henderson <rth@twiddle.net>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
This brings us a step closer to QOM'ified SH7750 SoC and
fixes b350ab75 (target-sh4: Move PVR/PRR/CVR into SuperHCPUClass)
assuming SuperHCPU type for SUPERH_CPU_GET_CLASS().
Fix Coding Style issues while at it (indentation, braces).
Reported-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Print an error message as done for the r2d machine and exit.
Signed-off-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
* 'tci' of git://qemu.weilnetz.de/qemu:
tci: Make tcg temporaries local to tcg_qemu_tb_exec
tci: Delete unused tb_ret_addr
tci: Avoid code before declarations
tci: Use a local variable for env
tci: Use 32-bit signed offsets to loads/stores
* 'tcg-s390' of git://github.com/rth7680/qemu:
tcg-s390: Fix merge error in tgen_brcond
tcg-s390: Use all 20 bits of the offset in tcg_out_mem
tcg-s390: Use load-address for addition
tcg-s390: Cleanup argument shuffling fixme in softmmu code
tcg-s390: Use risbgz for andi
tcg-s390: Remove constraint letters for and
tcg-s390: Implement deposit opcodes
tcg-s390: Implement movcond opcodes
tcg-s390: Implement mulu2_i64 opcode
tcg-s390: Implement add2/sub2 opcodes
tcg-s390: Remove useless preprocessor conditions
tcg-s390: Properly allocate a stack frame.
tcg-s390: Fix movi
These are needed for any of the Win32 alarm timer implementations.
They are not tied to mmtimer exclusively.
Jacob tested this patch with both mmtimer and Win32 timers.
Cc: qemu-stable@nongnu.org
Tested-by: Jacob Kroon <jacob.kroon@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Stefan Weil <sw@weilnetz.de>
