At the moment presence of vfio-pci devices on a bus affect the way
the guest view table is allocated. If there is no vfio-pci on a PHB
and the host kernel supports KVM acceleration of H_PUT_TCE, a table
is allocated in KVM. However, if there is vfio-pci and we do yet not
KVM acceleration for these, the table has to be allocated by
the userspace. At the moment the table is allocated once at boot time
but next patches will reallocate it.
This moves kvmppc_create_spapr_tce/g_malloc0 and their counterparts
to helpers.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
The user could have picked LIOBN via the CLI but the device tree
rendering code would still use the value derived from the PHB index
(which is the default fallback if LIOBN is not set in the CLI).
This replaces SPAPR_PCI_LIOBN() with the actual DMA LIOBN value.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
There are possible racing situations involving hotplug events and
guest migration. For cases where a hotplug event is migrated, or
the guest is in the process of fetching device tree at the time of
migration, we need to ensure the device tree is created and
associated with the corresponding DRC for devices that were
hotplugged on the source, but 'coldplugged' on the target.
Signed-off-by: Jianjun Duan <duanj@linux.vnet.ibm.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
This patch adds check for negative return value from get_image_size(),
where it is missing. It avoids unnecessary two function calls.
Signed-off-by: Zhou Jie <zhoujie2011@cn.fujitsu.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
The last 8 bytes of the receive buffer list page (that has been supplied
by the guest with the H_REGISTER_LOGICAL_LAN call) contain a counter
for frames that have been dropped because there was no suitable receive
buffer available. This patch introduces code to use this field to
provide the information about dropped rx packets to the guest.
There it can be queried with "ethtool -S eth0 | grep rx_no_buffer".
Signed-off-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Currently, the spapr-vlan device is trying to flush the RX queue
after each RX buffer that has been added by the guest via the
H_ADD_LOGICAL_LAN_BUFFER hypercall. In case the receive buffer pool
was empty before, we only pass single packets to the guest this
way. This can cause very bad performance if a sender is trying
to stream fragmented UDP packets to the guest. For example when
using the UDP_STREAM test from netperf with UDP packets that are
much bigger than the MTU size, almost all UDP packets are dropped
in the guest since the chances are quite high that at least one of
the fragments got lost on the way.
When flushing the receive queue, it's much better if we'd have
a bunch of receive buffers available already, so that fragmented
packets can be passed to the guest in one go. To do this, the
spapr_vlan_receive() function should return 0 instead of -1 if there
are no more receive buffers available, so that receive_disabled = 1
gets temporarily set for the receive queue, and we have to delay
the queue flushing at the end of h_add_logical_lan_buffer() a little
bit by using a timer, so that the guest gets a chance to add multiple
RX buffers before we flush the queue again.
This improves the UDP_STREAM test with the spapr-vlan device a lot:
Running
netserver -p 44444 -L <guestip> -f -D -4
in the guest, and
netperf -p 44444 -L <hostip> -H <guestip> -t UDP_STREAM -l 60 -- -m 16384
in the host, I get the following values _without_ this patch:
Socket Message Elapsed Messages
Size Size Time Okay Errors Throughput
bytes bytes secs # # 10^6bits/sec
229376 16384 60.00 1738970 0 3798.83
229376 60.00 23 0.05
That "0.05" means that almost all UDP packets got lost/discarded
at the receiving side.
With this patch applied, the value look much better:
Socket Message Elapsed Messages
Size Size Time Okay Errors Throughput
bytes bytes secs # # 10^6bits/sec
229376 16384 60.00 1789104 0 3908.35
229376 60.00 22818 49.85
Signed-off-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
At the moment IOMMU MR only translate to the system memory.
However if some new code changes this, we will need clear indication why
it is not working so here is the check.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Since a788f227 "memory: Allow replay of IOMMU mapping notifications"
when new VFIO listener is added, all existing IOMMU mappings are
replayed. However there is a problem that the base address of
an IOMMU memory region (IOMMU MR) is ignored which is not a problem
for the existing user (which is pseries) with its default 32bit DMA
window starting at 0 but it is if there is another DMA window.
This stores the IOMMU's offset_within_address_space and adjusts
the IOVA before calling vfio_dma_map/vfio_dma_unmap.
As the IOMMU notifier expects IOVA offset rather than the absolute
address, this also adjusts IOVA in sPAPR H_PUT_TCE handler before
calling notifier(s).
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
7532d3cbf "vfio: Fix 128 bit handling" added support for 64bit IOMMU
memory regions when those are added to VFIO address space; however
removing code cannot cope with these as int128_get64() will fail on
1<<64.
This copies 128bit handling from region_add() to region_del().
Since the only machine type which is actually going to use 64bit IOMMU
is pseries and it never really removes them (instead it will dynamically
add/remove subregions), this should cause no behavioral change.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
The IGD OpRegion is enabled automatically when running in legacy mode,
but it can sometimes be useful in universal passthrough mode as well.
Without an OpRegion, output spigots don't work, and even though Intel
doesn't officially support physical outputs in UPT mode, it's a
useful feature. Note that if an OpRegion is enabled but a monitor is
not connected, some graphics features will be disabled in the guest
versus a headless system without an OpRegion, where they would work.
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
Tested-by: Gerd Hoffmann <kraxel@redhat.com>
Enable quirks to support SandyBridge and newer IGD devices as primary
VM graphics. This requires new vfio-pci device specific regions added
in kernel v4.6 to expose the IGD OpRegion, the shadow ROM, and config
space access to the PCI host bridge and LPC/ISA bridge. VM firmware
support, SeaBIOS only so far, is also required for reserving memory
regions for IGD specific use. In order to enable this mode, IGD must
be assigned to the VM at PCI bus address 00:02.0, it must have a ROM,
it must be able to enable VGA, it must have or be able to create on
its own an LPC/ISA bridge of the proper type at PCI bus address
00:1f.0 (sorry, not compatible with Q35 yet), and it must have the
above noted vfio-pci kernel features and BIOS. The intention is that
to enable this mode, a user simply needs to assign 00:02.0 from the
host to 00:02.0 in the VM:
-device vfio-pci,host=0000:00:02.0,bus=pci.0,addr=02.0
and everything either happens automatically or it doesn't. In the
case that it doesn't, we leave error reports, but assume the device
will operate in universal passthrough mode (UPT), which doesn't
require any of this, but has a much more narrow window of supported
devices, supported use cases, and supported guest drivers.
When using IGD in this mode, the VM firmware is required to reserve
some VM RAM for the OpRegion (on the order or several 4k pages) and
stolen memory for the GTT (up to 8MB for the latest GPUs). An
additional option, x-igd-gms allows the user to specify some amount
of additional memory (value is number of 32MB chunks up to 512MB) that
is pre-allocated for graphics use. TBH, I don't know of anything that
requires this or makes use of this memory, which is why we don't
allocate any by default, but the specification suggests this is not
actually a valid combination, so the option exists as a workaround.
Please report if it's actually necessary in some environment.
See code comments for further discussion about the actual operation
of the quirks necessary to assign these devices.
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
Tested-by: Gerd Hoffmann <kraxel@redhat.com>
Capability probing modifies wmask, which quirks may be interested in
changing themselves. Apply our BAR quirks after the capability scan
to make this possible.
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
Tested-by: Gerd Hoffmann <kraxel@redhat.com>
Combine VGA discovery and registration. Quirks can have dependencies
on BARs, so the quirks push out until after we've scanned the BARs.
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
Tested-by: Gerd Hoffmann <kraxel@redhat.com>
This function returns success if either we setup the VGA region or
the host vfio doesn't return enough regions to support the VGA index.
This latter case doesn't make any sense. If we're asked to populate
VGA, fail if it doesn't exist and let the caller decide if that's
important.
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
Tested-by: Gerd Hoffmann <kraxel@redhat.com>
Given a device specific region type and sub-type, find it. Also
cleanup return point on error in vfio_get_region_info() so that we
always return 0 with a valid pointer or -errno and NULL.
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
Tested-by: Gerd Hoffmann <kraxel@redhat.com>
The sparse mmap capability in a vfio region info allows vfio to tell
us which sub-areas of a region may be mmap'd. Thus rather than
assuming a single mmap covers the entire region and later frobbing it
ourselves for things like the PCI MSI-X vector table, we can read that
directly from vfio.
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
Tested-by: Gerd Hoffmann <kraxel@redhat.com>
This is a big refactoring of the migration backend code - moving away from
QEMUFile to the new QIOChannel framework introduced here. This brings a
good level of abstraction and reduction of many lines of code.
This series also adds the ability for many backends (all except RDMA) to
use TLS for encrypting the migration data between the endpoints.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2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=AYEK
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/amit-migration/tags/migration-2.7-2' into staging
migration: add TLS support to the migration data channel
This is a big refactoring of the migration backend code - moving away from
QEMUFile to the new QIOChannel framework introduced here. This brings a
good level of abstraction and reduction of many lines of code.
This series also adds the ability for many backends (all except RDMA) to
use TLS for encrypting the migration data between the endpoints.
# gpg: Signature made Thu 26 May 2016 07:07:08 BST using RSA key ID 657EF670
# gpg: Good signature from "Amit Shah <amit@amitshah.net>"
# gpg: aka "Amit Shah <amit@kernel.org>"
# gpg: aka "Amit Shah <amitshah@gmx.net>"
* remotes/amit-migration/tags/migration-2.7-2: (28 commits)
migration: remove qemu_get_fd method from QEMUFile
migration: remove support for non-iovec based write handlers
migration: add support for encrypting data with TLS
migration: define 'tls-creds' and 'tls-hostname' migration parameters
migration: don't use an array for storing migrate parameters
migration: move definition of struct QEMUFile back into qemu-file.c
migration: delete QEMUFile stdio implementation
migration: delete QEMUFile sockets implementation
migration: delete QEMUSizedBuffer struct
migration: delete QEMUFile buffer implementation
migration: convert savevm to use QIOChannel for writing to files
migration: convert RDMA to use QIOChannel interface
migration: convert exec socket protocol to use QIOChannel
migration: convert fd socket protocol to use QIOChannel
migration: convert tcp socket protocol to use QIOChannel
migration: rename unix.c to socket.c
migration: convert unix socket protocol to use QIOChannel
migration: convert post-copy to use QIOChannelBuffer
migration: add reporting of errors for outgoing migration
migration: add helpers for creating QEMUFile from a QIOChannel
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.22 (GNU/Linux)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=g40O
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/kevin/tags/for-upstream' into staging
Block layer patches
# gpg: Signature made Wed 25 May 2016 18:32:40 BST using RSA key ID C88F2FD6
# gpg: Good signature from "Kevin Wolf <kwolf@redhat.com>"
* remotes/kevin/tags/for-upstream: (31 commits)
blockjob: Remove BlockJob.bs
commit: Use BlockBackend for I/O
backup: Use BlockBackend for I/O
backup: Remove bs parameter from backup_do_cow()
backup: Pack Notifier within BackupBlockJob
backup: Don't leak BackupBlockJob in error path
mirror: Use BlockBackend for I/O
mirror: Allow target that already has a BlockBackend
stream: Use BlockBackend for I/O
block: Make blk_co_preadv/pwritev() public
block: Convert block job core to BlockBackend
block: Default to enabled write cache in blk_new()
block: Cancel jobs first in bdrv_close_all()
block: keep a list of block jobs
block: Rename blk_write_zeroes()
dma-helpers: change BlockBackend to opaque value in DMAIOFunc
dma-helpers: change interface to byte-based
block: Propagate .drained_begin/end callbacks
block: Fix reconfiguring graph with drained nodes
block: Make bdrv_drain() use bdrv_drained_begin/end()
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Move bus type and related APIs to a separate file bus.c.
This is a first step in breaking up qdev.c into more manageable chunks.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
[AF: Rebased onto osdep.h]
Signed-off-by: Andreas Färber <afaerber@suse.de>
[PMM: added bus.o to link line for test-qdev-global-props]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The s390 skeys monitor command needs to write out a plain text
file. Currently it is using the QEMUFile class for this, but
work is ongoing to refactor QEMUFile and eliminate much code
related to it. The only feature qemu_fopen() gives over fopen()
is support for QEMU FD passing, but this can be achieved with
qemu_open() + fdopen() too. Switching to regular stdio FILE
APIs avoids the need to sprintf via an intermedia buffer which
slightly simplifies the code.
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Message-Id: <1461751518-12128-2-git-send-email-berrange@redhat.com>
Signed-off-by: Amit Shah <amit.shah@redhat.com>
Commit 983a1600 changed the semantics of blk_write_zeroes() to
be byte-based rather than sector-based, but did not change the
name, which is an open invitation for other code to misuse the
function. Renaming to pwrite_zeroes() makes it more in line
with other byte-based interfaces, and will help make it easier
to track which remaining write_zeroes interfaces still need
conversion.
Reported-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Callers of dma_blk_io have no way to pass extra data to the DMAIOFunc,
because the original callback and opaque are gone by the time DMAIOFunc
is called. On the other hand, the BlockBackend is usually derived
from those extra data that you could pass to the DMAIOFunc (in the
next patch, that would be the SCSIRequest).
So change DMAIOFunc's prototype, decoupling it from blk_aio_readv
and blk_aio_writev's. The new prototype loses the BlockBackend
and gains an extra opaque value which, in the case of dma_blk_readv
and dma_blk_writev, is of course used for the BlockBackend.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=Rh0Q
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/ehabkost/tags/x86-pull-request' into staging
X86 queue, 2016-05-23
# gpg: Signature made Mon 23 May 2016 23:48:27 BST using RSA key ID 984DC5A6
# gpg: Good signature from "Eduardo Habkost <ehabkost@redhat.com>"
* remotes/ehabkost/tags/x86-pull-request:
target-i386: kvm: Eliminate kvm_msr_entry_set()
target-i386: kvm: Simplify MSR setting functions
target-i386: kvm: Simplify MSR array construction
target-i386: kvm: Increase MSR_BUF_SIZE
target-i386: kvm: Allocate kvm_msrs struct once per VCPU
target-i386: Call cpu_exec_init() on realize
target-i386: Move TCG initialization to realize time
target-i386: Move TCG initialization check to tcg_x86_init()
cpu: Eliminate cpudef_init(), cpudef_setup()
target-i386: Set constant model_id for qemu64/qemu32/athlon
pc: Set CPU model-id on compat_props for pc <= 2.4
osdep: Move default qemu_hw_version() value to a macro
target-i386: kvm: Use X86XSaveArea struct for xsave save/load
target-i386: Use xsave structs for ext_save_area
target-i386: Define structs for layout of xsave area
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
open_eth_start_xmit has a huge stack usage of 65536 bytes approx.
Moving large arrays to heap to reduce stack usage.
Reduce size of a buffer allocated on stack to 0x600 bytes, which is the
maximal frame length when HUGEN bit is not set in MODER, only allocate
buffer on heap when that is too small. Thus heap is not used in typical
use case.
Signed-off-by: Zhou Jie <zhoujie2011@cn.fujitsu.com>
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Drop local definitions of MII registers and use constants from mii.h for
registers and register bits. No functional changes.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Instead of relying on x86_cpudef_setup() calling
qemu_hw_version(), just make old machines set model-id explicitly
on compat_props for qemu64, qemu32, and athlon. This will allow
us to eliminate x86_cpudef_setup() later.
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
* RAMBlock/Memory cleanups and fixes (Dominik, Gonglei, Fam, me)
* first part of linuxboot support for fw_cfg DMA (Richard)
* IOAPIC fix (Peter Xu)
* iSCSI SG_IO fix (Vadim)
* Various infrastructure bug fixes (Zhijian, Peter M., Stefan)
* CVE fixes (Prasad)
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.22 (GNU/Linux)
iQEcBAABAgAGBQJXQxxqAAoJEL/70l94x66DDxsH/ivM720+5xfAOjPmOzSrzwYf
wGqsP5Z1kxbvQ9KSFq+DNb3aooqyiPLkv8lDqn+RAy7Hba3d61NW8exYGB/sMn59
lKaEOcs+1eUFYF+G5K2wH+O/7l7cowqIMNmlN5sLKfmEjK7CsBAZyBYYRPl4Stft
pLYGfnu9BWPXynwJS1aNpAsHXE2XvPHimCc2+wKad/g72Sk21Mls6nohM2yn7bip
J511t4IAIcsQ8x81NDUDIzVX/1YoMUWhNDygHskgn0dEP6b5vLod0yZmAsaJWxxm
xMgyZAV5W71rOKt8cVek/dESncPBXgR5FDjvO8Ec3Z7gOBCcKZYG/p7VGBhrI0E=
=RNrL
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/bonzini/tags/for-upstream' into staging
* NMI cleanups (Bandan)
* RAMBlock/Memory cleanups and fixes (Dominik, Gonglei, Fam, me)
* first part of linuxboot support for fw_cfg DMA (Richard)
* IOAPIC fix (Peter Xu)
* iSCSI SG_IO fix (Vadim)
* Various infrastructure bug fixes (Zhijian, Peter M., Stefan)
* CVE fixes (Prasad)
# gpg: Signature made Mon 23 May 2016 16:06:18 BST using RSA key ID 78C7AE83
# gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>"
# gpg: aka "Paolo Bonzini <pbonzini@redhat.com>"
* remotes/bonzini/tags/for-upstream: (24 commits)
cpus: call the core nmi injection function
nmi: remove x86 specific nmi handling
target-i386: add a generic x86 nmi handler
coccinelle: add g_assert_cmp* to macro file
iscsi: pass SCSI status back for SG_IO
esp: check dma length before reading scsi command(CVE-2016-4441)
esp: check command buffer length before write(CVE-2016-4439)
scripts/signrom.py: Check for magic in option ROMs.
scripts/signrom.py: Allow option ROM checksum script to write the size header.
Remove config-devices.mak on 'make clean'
cpus.c: Use pthread_sigmask() rather than sigprocmask()
memory: remove unnecessary masking of MemoryRegion ram_addr
memory: Drop FlatRange.romd_mode
memory: Remove code for mr->may_overlap
exec: adjust rcu_read_lock requirement
memory: drop find_ram_block()
vl: change runstate only if new state is different from current state
ioapic: clear remote irr bit for edge-triggered interrupts
ioapic: keep RO bits for IOAPIC entry
target-i386: key sfence availability on CPUID_SSE, not CPUID_SSE2
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
nmi_monitor_handle is wired to call the x86 nmi
handler. So, we can directly use it at call sites.
Signed-off-by: Bandan Das <bsd@redhat.com>
Message-Id: <1463761717-26558-3-git-send-email-bsd@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Instead of having x86 ifdefs in core nmi code, this
change adds a arch specific handler that the nmi common
code can call.
Signed-off-by: Bandan Das <bsd@redhat.com>
Message-Id: <1463761717-26558-2-git-send-email-bsd@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The 53C9X Fast SCSI Controller(FSC) comes with an internal 16-byte
FIFO buffer. It is used to handle command and data transfer.
Routine get_cmd() uses DMA to read scsi commands into this buffer.
Add check to validate DMA length against buffer size to avoid any
overrun.
Fixes CVE-2016-4441.
Reported-by: Li Qiang <liqiang6-s@360.cn>
Cc: qemu-stable@nongnu.org
Signed-off-by: Prasad J Pandit <pjp@fedoraproject.org>
Message-Id: <1463654371-11169-3-git-send-email-ppandit@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The 53C9X Fast SCSI Controller(FSC) comes with an internal 16-byte
FIFO buffer. It is used to handle command and data transfer. While
writing to this command buffer 's->cmdbuf[TI_BUFSZ=16]', a check
was missing to validate input length. Add check to avoid OOB write
access.
Fixes CVE-2016-4439.
Reported-by: Li Qiang <liqiang6-s@360.cn>
Cc: qemu-stable@nongnu.org
Signed-off-by: Prasad J Pandit <pjp@fedoraproject.org>
Message-Id: <1463654371-11169-2-git-send-email-ppandit@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This is to better emulate IOAPIC version 0x1X hardware. Linux kernel
leveraged this "feature" to do explicit EOI since EOI register is still
not introduced at that time. This will also fix the issue that level
triggered interrupts failed to work when IR enabled (tested with Linux
kernel version 4.5).
Reviewed-by: Radim Krčmář <rkrcmar@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <1462875682-1349-3-git-send-email-peterx@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Currently IOAPIC RO bits can be written. To be better aligned with
hardware, we should let them read-only.
Reviewed-by: Radim Krčmář <rkrcmar@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <1462875682-1349-2-git-send-email-peterx@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
When processing Task Priorty Register(TPR) access, it could leak
automatic stack variable 'imm32' in patch_instruction().
Initialise the variable to avoid it.
Reported by: Donghai Zdh <donghai.zdh@alibaba-inc.com>
Cc: qemu-stable@nongnu.org
Signed-off-by: Prasad J Pandit <pjp@fedoraproject.org>
Message-Id: <1460013608-16670-1-git-send-email-ppandit@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
QEMU currently crashes when an OHCI controller is instantiated with
too many ports, e.g. "-device pci-ohci,num-ports=100,masterbus=1".
Thus add a proper check in usb_ohci_init() to make sure that we
do not use more than OHCI_MAX_PORTS = 15 ports here.
Ticket: https://bugs.launchpad.net/qemu/+bug/1581308
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-id: 1463995387-11710-1-git-send-email-thuth@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Commit "fd3c136 vga: make sure vga register setup for vbe stays intact
(CVE-2016-3712)." causes a regression. The win7 installer is unhappy
because it can't freely modify vga registers any more while in vbe mode.
This patch introduces a new sr_vbe register set. The vbe_update_vgaregs
will fill sr_vbe[] instead of sr[]. Normal vga register reads and
writes go to sr[]. Any sr register read access happens through a new
sr() helper function which will read from sr_vbe[] with vbe active and
from sr[] otherwise.
This way we can allow guests update sr[] registers as they want, without
allowing them disrupt vbe video modes that way.
Cc: qemu-stable@nongnu.org
Reported-by: Thomas Lamprecht <thomas@lamprecht.org>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-id: 1463475294-14119-1-git-send-email-kraxel@redhat.com
Add a backend for para-virtualized USB devices for xen domains.
The backend is using host-libusb to forward USB requests from a
domain via libusb to the real device(s) passed through.
Signed-off-by: Juergen Gross <jgross@suse.com>
Acked-by: Anthony PERARD <anthony.perard@citrix.com>
Message-id: 1463062421-613-4-git-send-email-jgross@suse.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Add a Xenstore directory for each supported pv backend. This will allow
Xen tools to decide which backend type to use in case there are
multiple possibilities.
The information is added under
/local/domain/<backend-domid>/device-model/<domid>/backends
before the "running" state is written to Xenstore. Using a directory
for each backend enables us to add parameters for specific backends
in the future.
This interface is documented in the Xen source repository in the file
docs/misc/qemu-backends.txt
In order to reuse the Xenstore directory creation already present in
hw/xen/xen_devconfig.c move the related functions to
hw/xen/xen_backend.c where they fit better.
Signed-off-by: Juergen Gross <jgross@suse.com>
Acked-by: Anthony PERARD <anthony.perard@citrix.com>
Reviewed-by: Wei Liu <wei.liu2@citrix.com>
Message-id: 1463062421-613-3-git-send-email-jgross@suse.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
The value is defined in virtio_gpu.h already (changing from 4 to 16).
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-id: 1463653560-26958-6-git-send-email-marcandre.lureau@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Introduce a new dummy system device serving as parent for virtual
buses. This will enable new pv backends to introduce virtual buses
which are removable again opposed to system buses which are meant
to stay once added.
Signed-off-by: Juergen Gross <jgross@suse.com>
Acked-by: Anthony PERARD <anthony.perard@citrix.com>
Reviewed-by: Wei Liu <wei.liu2@citrix.com>
Message-id: 1463062421-613-2-git-send-email-jgross@suse.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
The scanout id should not be above the configured num_scanouts.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-id: 1463653560-26958-5-git-send-email-marcandre.lureau@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Before accessing the g->scanout array, in order to avoid potential
out-of-bounds access.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-id: 1463653560-26958-2-git-send-email-marcandre.lureau@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Switch to adding compat properties incrementaly instead of
completly overwriting compat_props per machine type.
That removes data duplication which we have due to nested
[PC|SPAPR]_COMPAT_* macros.
It also allows to set default device properties from
default foo_machine_options() hook, which will be used
in following patch for putting VMGENID device as
a function if ISA bridge on pc/q35 machines.
Suggested-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
[ehabkost: Fixed CCW_COMPAT_* and PC_COMPAT_0_* defines]
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
All DisplayType values are just UI options that don't affect any
hardware emulation code, except for DT_NOGRAPHIC. Replace
DT_NOGRAPHIC with DT_NONE plus a new "-machine graphics=on|off"
option, so hardware emulation code don't need to use the
display_type variable.
Cc: Michael Walle <michael@walle.cc>
Cc: Blue Swirl <blauwirbel@gmail.com>
Cc: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
