# -*- Mode: makefile -*- GENERATED_HEADERS = config-target.h CONFIG_NO_KVM = $(if $(subst n,,$(CONFIG_KVM)),n,y) include ../config-host.mak include config-devices.mak include config-target.mak include $(SRC_PATH)/rules.mak ifneq ($(HWDIR),) include $(HWDIR)/config.mak endif TARGET_PATH=$(SRC_PATH)/target-$(TARGET_BASE_ARCH) $(call set-vpath, $(SRC_PATH):$(TARGET_PATH):$(SRC_PATH)/hw) QEMU_CFLAGS+= -I.. -I$(TARGET_PATH) -DNEED_CPU_H include $(SRC_PATH)/Makefile.objs ifdef CONFIG_USER_ONLY # user emulator name QEMU_PROG=qemu-$(TARGET_ARCH2) else # system emulator name ifeq ($(TARGET_ARCH), i386) QEMU_PROG=qemu$(EXESUF) else QEMU_PROG=qemu-system-$(TARGET_ARCH2)$(EXESUF) endif endif PROGS=$(QEMU_PROG) LIBS+=-lm kvm.o kvm-all.o vhost.o vhost_net.o: QEMU_CFLAGS+=$(KVM_CFLAGS) config-target.h: config-target.h-timestamp config-target.h-timestamp: config-target.mak all: $(PROGS) # Dummy command so that make thinks it has done something @true ######################################################### # cpu emulator library libobj-y = exec.o translate-all.o cpu-exec.o translate.o libobj-y += tcg/tcg.o libobj-$(CONFIG_SOFTFLOAT) += fpu/softfloat.o libobj-$(CONFIG_NOSOFTFLOAT) += fpu/softfloat-native.o libobj-y += op_helper.o helper.o ifeq ($(TARGET_BASE_ARCH), i386) libobj-y += cpuid.o endif libobj-$(CONFIG_NEED_MMU) += mmu.o libobj-$(TARGET_ARM) += neon_helper.o iwmmxt_helper.o libobj-y += disas.o $(libobj-y): $(GENERATED_HEADERS) # libqemu translate.o: translate.c cpu.h translate-all.o: translate-all.c cpu.h tcg/tcg.o: cpu.h # HELPER_CFLAGS is used for all the code compiled with static register # variables op_helper.o cpu-exec.o: QEMU_CFLAGS += $(HELPER_CFLAGS) # Note: this is a workaround. The real fix is to avoid compiling # cpu_signal_handler() in cpu-exec.c. signal.o: QEMU_CFLAGS += $(HELPER_CFLAGS) ######################################################### # Linux user emulator target ifdef CONFIG_LINUX_USER $(call set-vpath, $(SRC_PATH)/linux-user:$(SRC_PATH)/linux-user/$(TARGET_ABI_DIR)) QEMU_CFLAGS+=-I$(SRC_PATH)/linux-user -I$(SRC_PATH)/linux-user/$(TARGET_ABI_DIR) obj-y = main.o syscall.o strace.o mmap.o signal.o thunk.o \ elfload.o linuxload.o uaccess.o gdbstub.o cpu-uname.o obj-$(TARGET_HAS_BFLT) += flatload.o obj-$(TARGET_I386) += vm86.o obj-i386-y += ioport-user.o nwfpe-obj-y = fpa11.o fpa11_cpdo.o fpa11_cpdt.o fpa11_cprt.o fpopcode.o nwfpe-obj-y += single_cpdo.o double_cpdo.o extended_cpdo.o obj-arm-y += $(addprefix nwfpe/, $(nwfpe-obj-y)) obj-arm-y += arm-semi.o obj-m68k-y += m68k-sim.o m68k-semi.o $(obj-y) $(obj-$(TARGET_BASE_ARCH)-y): $(GENERATED_HEADERS) obj-y += $(addprefix ../libuser/, $(user-obj-y)) obj-y += $(addprefix ../libdis-user/, $(libdis-y)) obj-y += $(libobj-y) endif #CONFIG_LINUX_USER ######################################################### # Darwin user emulator target ifdef CONFIG_DARWIN_USER $(call set-vpath, $(SRC_PATH)/darwin-user) QEMU_CFLAGS+=-I$(SRC_PATH)/darwin-user -I$(SRC_PATH)/darwin-user/$(TARGET_ARCH) # Leave some space for the regular program loading zone LDFLAGS+=-Wl,-segaddr,__STD_PROG_ZONE,0x1000 -image_base 0x0e000000 LIBS+=-lmx obj-y = main.o commpage.o machload.o mmap.o signal.o syscall.o thunk.o \ gdbstub.o obj-i386-y += ioport-user.o $(obj-y) $(obj-$(TARGET_BASE_ARCH)-y): $(GENERATED_HEADERS) obj-y += $(addprefix ../libuser/, $(user-obj-y)) obj-y += $(addprefix ../libdis-user/, $(libdis-y)) obj-y += $(libobj-y) endif #CONFIG_DARWIN_USER ######################################################### # BSD user emulator target ifdef CONFIG_BSD_USER $(call set-vpath, $(SRC_PATH)/bsd-user) QEMU_CFLAGS+=-I$(SRC_PATH)/bsd-user -I$(SRC_PATH)/bsd-user/$(TARGET_ARCH) obj-y = main.o bsdload.o elfload.o mmap.o signal.o strace.o syscall.o \ gdbstub.o uaccess.o obj-i386-y += ioport-user.o $(obj-y) $(obj-$(TARGET_BASE_ARCH)-y): $(GENERATED_HEADERS) obj-y += $(addprefix ../libuser/, $(user-obj-y)) obj-y += $(addprefix ../libdis-user/, $(libdis-y)) obj-y += $(libobj-y) endif #CONFIG_BSD_USER ######################################################### # System emulator target ifdef CONFIG_SOFTMMU obj-y = arch_init.o cpus.o monitor.o machine.o gdbstub.o balloon.o # virtio has to be here due to weird dependency between PCI and virtio-net. # need to fix this properly obj-y += virtio-blk.o virtio-balloon.o virtio-net.o virtio-serial-bus.o obj-$(CONFIG_VIRTIO_PCI) += virtio-pci.o obj-y += vhost_net.o obj-$(CONFIG_VHOST_NET) += vhost.o obj-$(CONFIG_LINUX) += virtio-9p.o obj-y += rwhandler.o obj-$(CONFIG_KVM) += kvm.o kvm-all.o obj-$(CONFIG_NO_KVM) += kvm-stub.o LIBS+=-lz QEMU_CFLAGS += $(VNC_TLS_CFLAGS) QEMU_CFLAGS += $(VNC_SASL_CFLAGS) # xen backend driver support obj-$(CONFIG_XEN) += xen_machine_pv.o xen_domainbuild.o # USB layer obj-$(CONFIG_USB_OHCI) += usb-ohci.o # PCI network cards obj-y += rtl8139.o obj-y += e1000.o # Hardware support obj-i386-y = pckbd.o dma.o obj-i386-y += vga.o obj-i386-y += mc146818rtc.o i8259.o pc.o obj-i386-y += cirrus_vga.o apic.o ioapic.o piix_pci.o obj-i386-y += vmmouse.o vmport.o hpet.o obj-i386-y += device-hotplug.o pci-hotplug.o smbios.o wdt_ib700.o obj-i386-y += debugcon.o multiboot.o obj-i386-y += pm_smbus.o apm.o acpi_piix4.o # shared objects obj-ppc-y = ppc.o obj-ppc-y += vga.o dma.o # PREP target obj-ppc-y += pckbd.o i8259.o mc146818rtc.o obj-ppc-y += ppc_prep.o # OldWorld PowerMac obj-ppc-y += ppc_oldworld.o # NewWorld PowerMac obj-ppc-y += ppc_newworld.o # PowerPC 4xx boards obj-ppc-y += ppc4xx_devs.o ppc4xx_pci.o ppc405_uc.o ppc405_boards.o obj-ppc-y += ppc440.o ppc440_bamboo.o # PowerPC E500 boards obj-ppc-y += ppce500_mpc8544ds.o obj-ppc-$(CONFIG_KVM) += kvm_ppc.o obj-ppc-$(CONFIG_FDT) += device_tree.o obj-mips-y = mips_r4k.o mips_jazz.o mips_malta.o mips_mipssim.o obj-mips-y += mips_addr.o mips_timer.o mips_int.o obj-mips-y += dma.o vga.o i8259.o obj-mips-y += g364fb.o jazz_led.o obj-mips-y += gt64xxx.o pckbd.o mc146818rtc.o obj-mips-y += piix4.o cirrus_vga.o obj-mips-y += pm_smbus.o apm.o acpi_piix4.o obj-microblaze-y = petalogix_s3adsp1800_mmu.o obj-microblaze-y += microblaze_pic_cpu.o obj-microblaze-y += xilinx_intc.o obj-microblaze-y += xilinx_timer.o obj-microblaze-y += xilinx_uartlite.o obj-microblaze-y += xilinx_ethlite.o obj-microblaze-$(CONFIG_FDT) += device_tree.o # Boards obj-cris-y = cris_pic_cpu.o etraxfs.o axis_dev88.o # IO blocks obj-cris-y += etraxfs_dma.o obj-cris-y += etraxfs_pic.o obj-cris-y += etraxfs_eth.o obj-cris-y += etraxfs_timer.o obj-cris-y += etraxfs_ser.o ifeq ($(TARGET_ARCH), sparc64) obj-sparc-y = sun4u.o pckbd.o apb_pci.o obj-sparc-y += vga.o obj-sparc-y += mc146818rtc.o obj-sparc-y += cirrus_vga.o else obj-sparc-y = sun4m.o lance.o tcx.o sun4m_iommu.o slavio_intctl.o obj-sparc-y += slavio_timer.o slavio_misc.o sparc32_dma.o obj-sparc-y += cs4231.o eccmemctl.o sbi.o sun4c_intctl.o endif obj-arm-y = integratorcp.o versatilepb.o arm_pic.o arm_timer.o obj-arm-y += arm_boot.o pl011.o pl031.o pl050.o pl080.o pl110.o pl181.o pl190.o obj-arm-y += versatile_pci.o obj-arm-y += realview_gic.o realview.o arm_sysctl.o arm11mpcore.o a9mpcore.o obj-arm-y += armv7m.o armv7m_nvic.o stellaris.o pl022.o stellaris_enet.o obj-arm-y += pl061.o obj-arm-y += arm-semi.o obj-arm-y += pxa2xx.o pxa2xx_pic.o pxa2xx_gpio.o pxa2xx_timer.o pxa2xx_dma.o obj-arm-y += pxa2xx_lcd.o pxa2xx_mmci.o pxa2xx_pcmcia.o pxa2xx_keypad.o obj-arm-y += gumstix.o obj-arm-y += zaurus.o ide/microdrive.o spitz.o tosa.o tc6393xb.o obj-arm-y += omap1.o omap_lcdc.o omap_dma.o omap_clk.o omap_mmc.o omap_i2c.o obj-arm-y += omap2.o omap_dss.o soc_dma.o obj-arm-y += omap_sx1.o palm.o tsc210x.o obj-arm-y += nseries.o blizzard.o onenand.o vga.o cbus.o tusb6010.o usb-musb.o obj-arm-y += mst_fpga.o mainstone.o obj-arm-y += musicpal.o bitbang_i2c.o marvell_88w8618_audio.o obj-arm-y += framebuffer.o obj-arm-y += syborg.o syborg_fb.o syborg_interrupt.o syborg_keyboard.o obj-arm-y += syborg_serial.o syborg_timer.o syborg_pointer.o syborg_rtc.o obj-arm-y += syborg_virtio.o obj-sh4-y = shix.o r2d.o sh7750.o sh7750_regnames.o tc58128.o obj-sh4-y += sh_timer.o sh_serial.o sh_intc.o sh_pci.o sm501.o obj-sh4-y += ide/mmio.o obj-m68k-y = an5206.o mcf5206.o mcf_uart.o mcf_intc.o mcf5208.o mcf_fec.o obj-m68k-y += m68k-semi.o dummy_m68k.o obj-s390x-y = s390-virtio-bus.o s390-virtio.o obj-alpha-y = alpha_palcode.o main.o: QEMU_CFLAGS+=$(GPROF_CFLAGS) monitor.o: qemu-monitor.h $(obj-y) $(obj-$(TARGET_BASE_ARCH)-y): $(GENERATED_HEADERS) obj-y += $(addprefix ../, $(common-obj-y)) obj-y += $(addprefix ../libdis/, $(libdis-y)) obj-y += $(libobj-y) obj-y += $(addprefix $(HWDIR)/, $(hw-obj-y)) endif # CONFIG_SOFTMMU obj-$(CONFIG_GDBSTUB_XML) += gdbstub-xml.o $(QEMU_PROG): $(obj-y) $(obj-$(TARGET_BASE_ARCH)-y) $(call LINK,$(obj-y) $(obj-$(TARGET_BASE_ARCH)-y)) gdbstub-xml.c: $(TARGET_XML_FILES) $(SRC_PATH)/feature_to_c.sh $(call quiet-command,rm -f $@ && $(SHELL) $(SRC_PATH)/feature_to_c.sh $@ $(TARGET_XML_FILES)," GEN $(TARGET_DIR)$@") qemu-monitor.h: $(SRC_PATH)/qemu-monitor.hx $(call quiet-command,sh $(SRC_PATH)/hxtool -h < $< > $@," GEN $(TARGET_DIR)$@") clean: rm -f *.o *.a *~ $(PROGS) nwfpe/*.o fpu/*.o rm -f *.d */*.d tcg/*.o ide/*.o rm -f qemu-monitor.h gdbstub-xml.c install: all ifneq ($(PROGS),) $(INSTALL) -m 755 $(STRIP_OPT) $(PROGS) "$(DESTDIR)$(bindir)" endif # Include automatically generated dependency files -include $(wildcard *.d */*.d)