mirror of
https://github.com/xemu-project/xemu.git
synced 2024-11-27 05:20:50 +00:00
7848023ae4
The properties to attach a CANBUS object to the xlnx-zcu102 machine have a period in them. We want to use periods in properties for compound QAPI types, and besides the "xlnx-zcu102." prefix is both unnecessary and different from any other machine property name. Remove it. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Message-id: 20210118162537.779542-1-pbonzini@redhat.com Reviewed-by: Vikram Garhwal <fnu.vikram@xilinx.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
361 lines
13 KiB
C
361 lines
13 KiB
C
/*
|
|
* QTests for the Xilinx ZynqMP CAN controller.
|
|
*
|
|
* Copyright (c) 2020 Xilinx Inc.
|
|
*
|
|
* Written-by: Vikram Garhwal<fnu.vikram@xilinx.com>
|
|
*
|
|
* Permission is hereby granted, free of charge, to any person obtaining a copy
|
|
* of this software and associated documentation files (the "Software"), to deal
|
|
* in the Software without restriction, including without limitation the rights
|
|
* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
|
|
* copies of the Software, and to permit persons to whom the Software is
|
|
* furnished to do so, subject to the following conditions:
|
|
*
|
|
* The above copyright notice and this permission notice shall be included in
|
|
* all copies or substantial portions of the Software.
|
|
*
|
|
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
|
|
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
|
|
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
|
|
* THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
|
|
* LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
|
|
* OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
|
|
* THE SOFTWARE.
|
|
*/
|
|
|
|
#include "qemu/osdep.h"
|
|
#include "libqos/libqtest.h"
|
|
|
|
/* Base address. */
|
|
#define CAN0_BASE_ADDR 0xFF060000
|
|
#define CAN1_BASE_ADDR 0xFF070000
|
|
|
|
/* Register addresses. */
|
|
#define R_SRR_OFFSET 0x00
|
|
#define R_MSR_OFFSET 0x04
|
|
#define R_SR_OFFSET 0x18
|
|
#define R_ISR_OFFSET 0x1C
|
|
#define R_ICR_OFFSET 0x24
|
|
#define R_TXID_OFFSET 0x30
|
|
#define R_TXDLC_OFFSET 0x34
|
|
#define R_TXDATA1_OFFSET 0x38
|
|
#define R_TXDATA2_OFFSET 0x3C
|
|
#define R_RXID_OFFSET 0x50
|
|
#define R_RXDLC_OFFSET 0x54
|
|
#define R_RXDATA1_OFFSET 0x58
|
|
#define R_RXDATA2_OFFSET 0x5C
|
|
#define R_AFR 0x60
|
|
#define R_AFMR1 0x64
|
|
#define R_AFIR1 0x68
|
|
#define R_AFMR2 0x6C
|
|
#define R_AFIR2 0x70
|
|
#define R_AFMR3 0x74
|
|
#define R_AFIR3 0x78
|
|
#define R_AFMR4 0x7C
|
|
#define R_AFIR4 0x80
|
|
|
|
/* CAN modes. */
|
|
#define CONFIG_MODE 0x00
|
|
#define NORMAL_MODE 0x00
|
|
#define LOOPBACK_MODE 0x02
|
|
#define SNOOP_MODE 0x04
|
|
#define SLEEP_MODE 0x01
|
|
#define ENABLE_CAN (1 << 1)
|
|
#define STATUS_NORMAL_MODE (1 << 3)
|
|
#define STATUS_LOOPBACK_MODE (1 << 1)
|
|
#define STATUS_SNOOP_MODE (1 << 12)
|
|
#define STATUS_SLEEP_MODE (1 << 2)
|
|
#define ISR_TXOK (1 << 1)
|
|
#define ISR_RXOK (1 << 4)
|
|
|
|
static void match_rx_tx_data(const uint32_t *buf_tx, const uint32_t *buf_rx,
|
|
uint8_t can_timestamp)
|
|
{
|
|
uint16_t size = 0;
|
|
uint8_t len = 4;
|
|
|
|
while (size < len) {
|
|
if (R_RXID_OFFSET + 4 * size == R_RXDLC_OFFSET) {
|
|
g_assert_cmpint(buf_rx[size], ==, buf_tx[size] + can_timestamp);
|
|
} else {
|
|
g_assert_cmpint(buf_rx[size], ==, buf_tx[size]);
|
|
}
|
|
|
|
size++;
|
|
}
|
|
}
|
|
|
|
static void read_data(QTestState *qts, uint64_t can_base_addr, uint32_t *buf_rx)
|
|
{
|
|
uint32_t int_status;
|
|
|
|
/* Read the interrupt on CAN rx. */
|
|
int_status = qtest_readl(qts, can_base_addr + R_ISR_OFFSET) & ISR_RXOK;
|
|
|
|
g_assert_cmpint(int_status, ==, ISR_RXOK);
|
|
|
|
/* Read the RX register data for CAN. */
|
|
buf_rx[0] = qtest_readl(qts, can_base_addr + R_RXID_OFFSET);
|
|
buf_rx[1] = qtest_readl(qts, can_base_addr + R_RXDLC_OFFSET);
|
|
buf_rx[2] = qtest_readl(qts, can_base_addr + R_RXDATA1_OFFSET);
|
|
buf_rx[3] = qtest_readl(qts, can_base_addr + R_RXDATA2_OFFSET);
|
|
|
|
/* Clear the RX interrupt. */
|
|
qtest_writel(qts, CAN1_BASE_ADDR + R_ICR_OFFSET, ISR_RXOK);
|
|
}
|
|
|
|
static void send_data(QTestState *qts, uint64_t can_base_addr,
|
|
const uint32_t *buf_tx)
|
|
{
|
|
uint32_t int_status;
|
|
|
|
/* Write the TX register data for CAN. */
|
|
qtest_writel(qts, can_base_addr + R_TXID_OFFSET, buf_tx[0]);
|
|
qtest_writel(qts, can_base_addr + R_TXDLC_OFFSET, buf_tx[1]);
|
|
qtest_writel(qts, can_base_addr + R_TXDATA1_OFFSET, buf_tx[2]);
|
|
qtest_writel(qts, can_base_addr + R_TXDATA2_OFFSET, buf_tx[3]);
|
|
|
|
/* Read the interrupt on CAN for tx. */
|
|
int_status = qtest_readl(qts, can_base_addr + R_ISR_OFFSET) & ISR_TXOK;
|
|
|
|
g_assert_cmpint(int_status, ==, ISR_TXOK);
|
|
|
|
/* Clear the interrupt for tx. */
|
|
qtest_writel(qts, CAN0_BASE_ADDR + R_ICR_OFFSET, ISR_TXOK);
|
|
}
|
|
|
|
/*
|
|
* This test will be transferring data from CAN0 and CAN1 through canbus. CAN0
|
|
* initiate the data transfer to can-bus, CAN1 receives the data. Test compares
|
|
* the data sent from CAN0 with received on CAN1.
|
|
*/
|
|
static void test_can_bus(void)
|
|
{
|
|
const uint32_t buf_tx[4] = { 0xFF, 0x80000000, 0x12345678, 0x87654321 };
|
|
uint32_t buf_rx[4] = { 0x00, 0x00, 0x00, 0x00 };
|
|
uint32_t status = 0;
|
|
uint8_t can_timestamp = 1;
|
|
|
|
QTestState *qts = qtest_init("-machine xlnx-zcu102"
|
|
" -object can-bus,id=canbus"
|
|
" -machine canbus0=canbus"
|
|
" -machine canbus1=canbus"
|
|
);
|
|
|
|
/* Configure the CAN0 and CAN1. */
|
|
qtest_writel(qts, CAN0_BASE_ADDR + R_SRR_OFFSET, ENABLE_CAN);
|
|
qtest_writel(qts, CAN0_BASE_ADDR + R_MSR_OFFSET, NORMAL_MODE);
|
|
qtest_writel(qts, CAN1_BASE_ADDR + R_SRR_OFFSET, ENABLE_CAN);
|
|
qtest_writel(qts, CAN1_BASE_ADDR + R_MSR_OFFSET, NORMAL_MODE);
|
|
|
|
/* Check here if CAN0 and CAN1 are in normal mode. */
|
|
status = qtest_readl(qts, CAN0_BASE_ADDR + R_SR_OFFSET);
|
|
g_assert_cmpint(status, ==, STATUS_NORMAL_MODE);
|
|
|
|
status = qtest_readl(qts, CAN1_BASE_ADDR + R_SR_OFFSET);
|
|
g_assert_cmpint(status, ==, STATUS_NORMAL_MODE);
|
|
|
|
send_data(qts, CAN0_BASE_ADDR, buf_tx);
|
|
|
|
read_data(qts, CAN1_BASE_ADDR, buf_rx);
|
|
match_rx_tx_data(buf_tx, buf_rx, can_timestamp);
|
|
|
|
qtest_quit(qts);
|
|
}
|
|
|
|
/*
|
|
* This test is performing loopback mode on CAN0 and CAN1. Data sent from TX of
|
|
* each CAN0 and CAN1 are compared with RX register data for respective CAN.
|
|
*/
|
|
static void test_can_loopback(void)
|
|
{
|
|
uint32_t buf_tx[4] = { 0xFF, 0x80000000, 0x12345678, 0x87654321 };
|
|
uint32_t buf_rx[4] = { 0x00, 0x00, 0x00, 0x00 };
|
|
uint32_t status = 0;
|
|
|
|
QTestState *qts = qtest_init("-machine xlnx-zcu102"
|
|
" -object can-bus,id=canbus"
|
|
" -machine canbus0=canbus"
|
|
" -machine canbus1=canbus"
|
|
);
|
|
|
|
/* Configure the CAN0 in loopback mode. */
|
|
qtest_writel(qts, CAN0_BASE_ADDR + R_SRR_OFFSET, CONFIG_MODE);
|
|
qtest_writel(qts, CAN0_BASE_ADDR + R_MSR_OFFSET, LOOPBACK_MODE);
|
|
qtest_writel(qts, CAN0_BASE_ADDR + R_SRR_OFFSET, ENABLE_CAN);
|
|
|
|
/* Check here if CAN0 is set in loopback mode. */
|
|
status = qtest_readl(qts, CAN0_BASE_ADDR + R_SR_OFFSET);
|
|
|
|
g_assert_cmpint(status, ==, STATUS_LOOPBACK_MODE);
|
|
|
|
send_data(qts, CAN0_BASE_ADDR, buf_tx);
|
|
read_data(qts, CAN0_BASE_ADDR, buf_rx);
|
|
match_rx_tx_data(buf_tx, buf_rx, 0);
|
|
|
|
/* Configure the CAN1 in loopback mode. */
|
|
qtest_writel(qts, CAN1_BASE_ADDR + R_SRR_OFFSET, CONFIG_MODE);
|
|
qtest_writel(qts, CAN1_BASE_ADDR + R_MSR_OFFSET, LOOPBACK_MODE);
|
|
qtest_writel(qts, CAN1_BASE_ADDR + R_SRR_OFFSET, ENABLE_CAN);
|
|
|
|
/* Check here if CAN1 is set in loopback mode. */
|
|
status = qtest_readl(qts, CAN1_BASE_ADDR + R_SR_OFFSET);
|
|
|
|
g_assert_cmpint(status, ==, STATUS_LOOPBACK_MODE);
|
|
|
|
send_data(qts, CAN1_BASE_ADDR, buf_tx);
|
|
read_data(qts, CAN1_BASE_ADDR, buf_rx);
|
|
match_rx_tx_data(buf_tx, buf_rx, 0);
|
|
|
|
qtest_quit(qts);
|
|
}
|
|
|
|
/*
|
|
* Enable filters for CAN1. This will filter incoming messages with ID. In this
|
|
* test message will pass through filter 2.
|
|
*/
|
|
static void test_can_filter(void)
|
|
{
|
|
uint32_t buf_tx[4] = { 0x14, 0x80000000, 0x12345678, 0x87654321 };
|
|
uint32_t buf_rx[4] = { 0x00, 0x00, 0x00, 0x00 };
|
|
uint32_t status = 0;
|
|
uint8_t can_timestamp = 1;
|
|
|
|
QTestState *qts = qtest_init("-machine xlnx-zcu102"
|
|
" -object can-bus,id=canbus"
|
|
" -machine canbus0=canbus"
|
|
" -machine canbus1=canbus"
|
|
);
|
|
|
|
/* Configure the CAN0 and CAN1. */
|
|
qtest_writel(qts, CAN0_BASE_ADDR + R_SRR_OFFSET, ENABLE_CAN);
|
|
qtest_writel(qts, CAN0_BASE_ADDR + R_MSR_OFFSET, NORMAL_MODE);
|
|
qtest_writel(qts, CAN1_BASE_ADDR + R_SRR_OFFSET, ENABLE_CAN);
|
|
qtest_writel(qts, CAN1_BASE_ADDR + R_MSR_OFFSET, NORMAL_MODE);
|
|
|
|
/* Check here if CAN0 and CAN1 are in normal mode. */
|
|
status = qtest_readl(qts, CAN0_BASE_ADDR + R_SR_OFFSET);
|
|
g_assert_cmpint(status, ==, STATUS_NORMAL_MODE);
|
|
|
|
status = qtest_readl(qts, CAN1_BASE_ADDR + R_SR_OFFSET);
|
|
g_assert_cmpint(status, ==, STATUS_NORMAL_MODE);
|
|
|
|
/* Set filter for CAN1 for incoming messages. */
|
|
qtest_writel(qts, CAN1_BASE_ADDR + R_AFR, 0x0);
|
|
qtest_writel(qts, CAN1_BASE_ADDR + R_AFMR1, 0xF7);
|
|
qtest_writel(qts, CAN1_BASE_ADDR + R_AFIR1, 0x121F);
|
|
qtest_writel(qts, CAN1_BASE_ADDR + R_AFMR2, 0x5431);
|
|
qtest_writel(qts, CAN1_BASE_ADDR + R_AFIR2, 0x14);
|
|
qtest_writel(qts, CAN1_BASE_ADDR + R_AFMR3, 0x1234);
|
|
qtest_writel(qts, CAN1_BASE_ADDR + R_AFIR3, 0x5431);
|
|
qtest_writel(qts, CAN1_BASE_ADDR + R_AFMR4, 0xFFF);
|
|
qtest_writel(qts, CAN1_BASE_ADDR + R_AFIR4, 0x1234);
|
|
|
|
qtest_writel(qts, CAN1_BASE_ADDR + R_AFR, 0xF);
|
|
|
|
send_data(qts, CAN0_BASE_ADDR, buf_tx);
|
|
|
|
read_data(qts, CAN1_BASE_ADDR, buf_rx);
|
|
match_rx_tx_data(buf_tx, buf_rx, can_timestamp);
|
|
|
|
qtest_quit(qts);
|
|
}
|
|
|
|
/* Testing sleep mode on CAN0 while CAN1 is in normal mode. */
|
|
static void test_can_sleepmode(void)
|
|
{
|
|
uint32_t buf_tx[4] = { 0x14, 0x80000000, 0x12345678, 0x87654321 };
|
|
uint32_t buf_rx[4] = { 0x00, 0x00, 0x00, 0x00 };
|
|
uint32_t status = 0;
|
|
uint8_t can_timestamp = 1;
|
|
|
|
QTestState *qts = qtest_init("-machine xlnx-zcu102"
|
|
" -object can-bus,id=canbus"
|
|
" -machine canbus0=canbus"
|
|
" -machine canbus1=canbus"
|
|
);
|
|
|
|
/* Configure the CAN0. */
|
|
qtest_writel(qts, CAN0_BASE_ADDR + R_SRR_OFFSET, CONFIG_MODE);
|
|
qtest_writel(qts, CAN0_BASE_ADDR + R_MSR_OFFSET, SLEEP_MODE);
|
|
qtest_writel(qts, CAN0_BASE_ADDR + R_SRR_OFFSET, ENABLE_CAN);
|
|
|
|
qtest_writel(qts, CAN1_BASE_ADDR + R_SRR_OFFSET, ENABLE_CAN);
|
|
qtest_writel(qts, CAN1_BASE_ADDR + R_MSR_OFFSET, NORMAL_MODE);
|
|
|
|
/* Check here if CAN0 is in SLEEP mode and CAN1 in normal mode. */
|
|
status = qtest_readl(qts, CAN0_BASE_ADDR + R_SR_OFFSET);
|
|
g_assert_cmpint(status, ==, STATUS_SLEEP_MODE);
|
|
|
|
status = qtest_readl(qts, CAN1_BASE_ADDR + R_SR_OFFSET);
|
|
g_assert_cmpint(status, ==, STATUS_NORMAL_MODE);
|
|
|
|
send_data(qts, CAN1_BASE_ADDR, buf_tx);
|
|
|
|
/*
|
|
* Once CAN1 sends data on can-bus. CAN0 should exit sleep mode.
|
|
* Check the CAN0 status now. It should exit the sleep mode and receive the
|
|
* incoming data.
|
|
*/
|
|
status = qtest_readl(qts, CAN0_BASE_ADDR + R_SR_OFFSET);
|
|
g_assert_cmpint(status, ==, STATUS_NORMAL_MODE);
|
|
|
|
read_data(qts, CAN0_BASE_ADDR, buf_rx);
|
|
|
|
match_rx_tx_data(buf_tx, buf_rx, can_timestamp);
|
|
|
|
qtest_quit(qts);
|
|
}
|
|
|
|
/* Testing Snoop mode on CAN0 while CAN1 is in normal mode. */
|
|
static void test_can_snoopmode(void)
|
|
{
|
|
uint32_t buf_tx[4] = { 0x14, 0x80000000, 0x12345678, 0x87654321 };
|
|
uint32_t buf_rx[4] = { 0x00, 0x00, 0x00, 0x00 };
|
|
uint32_t status = 0;
|
|
uint8_t can_timestamp = 1;
|
|
|
|
QTestState *qts = qtest_init("-machine xlnx-zcu102"
|
|
" -object can-bus,id=canbus"
|
|
" -machine canbus0=canbus"
|
|
" -machine canbus1=canbus"
|
|
);
|
|
|
|
/* Configure the CAN0. */
|
|
qtest_writel(qts, CAN0_BASE_ADDR + R_SRR_OFFSET, CONFIG_MODE);
|
|
qtest_writel(qts, CAN0_BASE_ADDR + R_MSR_OFFSET, SNOOP_MODE);
|
|
qtest_writel(qts, CAN0_BASE_ADDR + R_SRR_OFFSET, ENABLE_CAN);
|
|
|
|
qtest_writel(qts, CAN1_BASE_ADDR + R_SRR_OFFSET, ENABLE_CAN);
|
|
qtest_writel(qts, CAN1_BASE_ADDR + R_MSR_OFFSET, NORMAL_MODE);
|
|
|
|
/* Check here if CAN0 is in SNOOP mode and CAN1 in normal mode. */
|
|
status = qtest_readl(qts, CAN0_BASE_ADDR + R_SR_OFFSET);
|
|
g_assert_cmpint(status, ==, STATUS_SNOOP_MODE);
|
|
|
|
status = qtest_readl(qts, CAN1_BASE_ADDR + R_SR_OFFSET);
|
|
g_assert_cmpint(status, ==, STATUS_NORMAL_MODE);
|
|
|
|
send_data(qts, CAN1_BASE_ADDR, buf_tx);
|
|
|
|
read_data(qts, CAN0_BASE_ADDR, buf_rx);
|
|
|
|
match_rx_tx_data(buf_tx, buf_rx, can_timestamp);
|
|
|
|
qtest_quit(qts);
|
|
}
|
|
|
|
int main(int argc, char **argv)
|
|
{
|
|
g_test_init(&argc, &argv, NULL);
|
|
|
|
qtest_add_func("/net/can/can_bus", test_can_bus);
|
|
qtest_add_func("/net/can/can_loopback", test_can_loopback);
|
|
qtest_add_func("/net/can/can_filter", test_can_filter);
|
|
qtest_add_func("/net/can/can_test_snoopmode", test_can_snoopmode);
|
|
qtest_add_func("/net/can/can_test_sleepmode", test_can_sleepmode);
|
|
|
|
return g_test_run();
|
|
}
|