mirror of
https://github.com/xemu-project/xemu.git
synced 2024-11-25 04:30:02 +00:00
300 lines
7.6 KiB
C
300 lines
7.6 KiB
C
/*
|
|
* Arm PrimeCell PL011 UART
|
|
*
|
|
* Copyright (c) 2006 CodeSourcery.
|
|
* Written by Paul Brook
|
|
*
|
|
* This code is licensed under the GPL.
|
|
*/
|
|
|
|
#include "sysbus.h"
|
|
#include "qemu-char.h"
|
|
|
|
typedef struct {
|
|
SysBusDevice busdev;
|
|
MemoryRegion iomem;
|
|
uint32_t readbuff;
|
|
uint32_t flags;
|
|
uint32_t lcr;
|
|
uint32_t cr;
|
|
uint32_t dmacr;
|
|
uint32_t int_enabled;
|
|
uint32_t int_level;
|
|
uint32_t read_fifo[16];
|
|
uint32_t ilpr;
|
|
uint32_t ibrd;
|
|
uint32_t fbrd;
|
|
uint32_t ifl;
|
|
int read_pos;
|
|
int read_count;
|
|
int read_trigger;
|
|
CharDriverState *chr;
|
|
qemu_irq irq;
|
|
const unsigned char *id;
|
|
} pl011_state;
|
|
|
|
#define PL011_INT_TX 0x20
|
|
#define PL011_INT_RX 0x10
|
|
|
|
#define PL011_FLAG_TXFE 0x80
|
|
#define PL011_FLAG_RXFF 0x40
|
|
#define PL011_FLAG_TXFF 0x20
|
|
#define PL011_FLAG_RXFE 0x10
|
|
|
|
static const unsigned char pl011_id_arm[8] =
|
|
{ 0x11, 0x10, 0x14, 0x00, 0x0d, 0xf0, 0x05, 0xb1 };
|
|
static const unsigned char pl011_id_luminary[8] =
|
|
{ 0x11, 0x00, 0x18, 0x01, 0x0d, 0xf0, 0x05, 0xb1 };
|
|
|
|
static void pl011_update(pl011_state *s)
|
|
{
|
|
uint32_t flags;
|
|
|
|
flags = s->int_level & s->int_enabled;
|
|
qemu_set_irq(s->irq, flags != 0);
|
|
}
|
|
|
|
static uint64_t pl011_read(void *opaque, target_phys_addr_t offset,
|
|
unsigned size)
|
|
{
|
|
pl011_state *s = (pl011_state *)opaque;
|
|
uint32_t c;
|
|
|
|
if (offset >= 0xfe0 && offset < 0x1000) {
|
|
return s->id[(offset - 0xfe0) >> 2];
|
|
}
|
|
switch (offset >> 2) {
|
|
case 0: /* UARTDR */
|
|
s->flags &= ~PL011_FLAG_RXFF;
|
|
c = s->read_fifo[s->read_pos];
|
|
if (s->read_count > 0) {
|
|
s->read_count--;
|
|
if (++s->read_pos == 16)
|
|
s->read_pos = 0;
|
|
}
|
|
if (s->read_count == 0) {
|
|
s->flags |= PL011_FLAG_RXFE;
|
|
}
|
|
if (s->read_count == s->read_trigger - 1)
|
|
s->int_level &= ~ PL011_INT_RX;
|
|
pl011_update(s);
|
|
qemu_chr_accept_input(s->chr);
|
|
return c;
|
|
case 1: /* UARTCR */
|
|
return 0;
|
|
case 6: /* UARTFR */
|
|
return s->flags;
|
|
case 8: /* UARTILPR */
|
|
return s->ilpr;
|
|
case 9: /* UARTIBRD */
|
|
return s->ibrd;
|
|
case 10: /* UARTFBRD */
|
|
return s->fbrd;
|
|
case 11: /* UARTLCR_H */
|
|
return s->lcr;
|
|
case 12: /* UARTCR */
|
|
return s->cr;
|
|
case 13: /* UARTIFLS */
|
|
return s->ifl;
|
|
case 14: /* UARTIMSC */
|
|
return s->int_enabled;
|
|
case 15: /* UARTRIS */
|
|
return s->int_level;
|
|
case 16: /* UARTMIS */
|
|
return s->int_level & s->int_enabled;
|
|
case 18: /* UARTDMACR */
|
|
return s->dmacr;
|
|
default:
|
|
hw_error("pl011_read: Bad offset %x\n", (int)offset);
|
|
return 0;
|
|
}
|
|
}
|
|
|
|
static void pl011_set_read_trigger(pl011_state *s)
|
|
{
|
|
#if 0
|
|
/* The docs say the RX interrupt is triggered when the FIFO exceeds
|
|
the threshold. However linux only reads the FIFO in response to an
|
|
interrupt. Triggering the interrupt when the FIFO is non-empty seems
|
|
to make things work. */
|
|
if (s->lcr & 0x10)
|
|
s->read_trigger = (s->ifl >> 1) & 0x1c;
|
|
else
|
|
#endif
|
|
s->read_trigger = 1;
|
|
}
|
|
|
|
static void pl011_write(void *opaque, target_phys_addr_t offset,
|
|
uint64_t value, unsigned size)
|
|
{
|
|
pl011_state *s = (pl011_state *)opaque;
|
|
unsigned char ch;
|
|
|
|
switch (offset >> 2) {
|
|
case 0: /* UARTDR */
|
|
/* ??? Check if transmitter is enabled. */
|
|
ch = value;
|
|
if (s->chr)
|
|
qemu_chr_fe_write(s->chr, &ch, 1);
|
|
s->int_level |= PL011_INT_TX;
|
|
pl011_update(s);
|
|
break;
|
|
case 1: /* UARTCR */
|
|
s->cr = value;
|
|
break;
|
|
case 6: /* UARTFR */
|
|
/* Writes to Flag register are ignored. */
|
|
break;
|
|
case 8: /* UARTUARTILPR */
|
|
s->ilpr = value;
|
|
break;
|
|
case 9: /* UARTIBRD */
|
|
s->ibrd = value;
|
|
break;
|
|
case 10: /* UARTFBRD */
|
|
s->fbrd = value;
|
|
break;
|
|
case 11: /* UARTLCR_H */
|
|
s->lcr = value;
|
|
pl011_set_read_trigger(s);
|
|
break;
|
|
case 12: /* UARTCR */
|
|
/* ??? Need to implement the enable and loopback bits. */
|
|
s->cr = value;
|
|
break;
|
|
case 13: /* UARTIFS */
|
|
s->ifl = value;
|
|
pl011_set_read_trigger(s);
|
|
break;
|
|
case 14: /* UARTIMSC */
|
|
s->int_enabled = value;
|
|
pl011_update(s);
|
|
break;
|
|
case 17: /* UARTICR */
|
|
s->int_level &= ~value;
|
|
pl011_update(s);
|
|
break;
|
|
case 18: /* UARTDMACR */
|
|
s->dmacr = value;
|
|
if (value & 3)
|
|
hw_error("PL011: DMA not implemented\n");
|
|
break;
|
|
default:
|
|
hw_error("pl011_write: Bad offset %x\n", (int)offset);
|
|
}
|
|
}
|
|
|
|
static int pl011_can_receive(void *opaque)
|
|
{
|
|
pl011_state *s = (pl011_state *)opaque;
|
|
|
|
if (s->lcr & 0x10)
|
|
return s->read_count < 16;
|
|
else
|
|
return s->read_count < 1;
|
|
}
|
|
|
|
static void pl011_put_fifo(void *opaque, uint32_t value)
|
|
{
|
|
pl011_state *s = (pl011_state *)opaque;
|
|
int slot;
|
|
|
|
slot = s->read_pos + s->read_count;
|
|
if (slot >= 16)
|
|
slot -= 16;
|
|
s->read_fifo[slot] = value;
|
|
s->read_count++;
|
|
s->flags &= ~PL011_FLAG_RXFE;
|
|
if (s->cr & 0x10 || s->read_count == 16) {
|
|
s->flags |= PL011_FLAG_RXFF;
|
|
}
|
|
if (s->read_count == s->read_trigger) {
|
|
s->int_level |= PL011_INT_RX;
|
|
pl011_update(s);
|
|
}
|
|
}
|
|
|
|
static void pl011_receive(void *opaque, const uint8_t *buf, int size)
|
|
{
|
|
pl011_put_fifo(opaque, *buf);
|
|
}
|
|
|
|
static void pl011_event(void *opaque, int event)
|
|
{
|
|
if (event == CHR_EVENT_BREAK)
|
|
pl011_put_fifo(opaque, 0x400);
|
|
}
|
|
|
|
static const MemoryRegionOps pl011_ops = {
|
|
.read = pl011_read,
|
|
.write = pl011_write,
|
|
.endianness = DEVICE_NATIVE_ENDIAN,
|
|
};
|
|
|
|
static const VMStateDescription vmstate_pl011 = {
|
|
.name = "pl011",
|
|
.version_id = 1,
|
|
.minimum_version_id = 1,
|
|
.minimum_version_id_old = 1,
|
|
.fields = (VMStateField[]) {
|
|
VMSTATE_UINT32(readbuff, pl011_state),
|
|
VMSTATE_UINT32(flags, pl011_state),
|
|
VMSTATE_UINT32(lcr, pl011_state),
|
|
VMSTATE_UINT32(cr, pl011_state),
|
|
VMSTATE_UINT32(dmacr, pl011_state),
|
|
VMSTATE_UINT32(int_enabled, pl011_state),
|
|
VMSTATE_UINT32(int_level, pl011_state),
|
|
VMSTATE_UINT32_ARRAY(read_fifo, pl011_state, 16),
|
|
VMSTATE_UINT32(ilpr, pl011_state),
|
|
VMSTATE_UINT32(ibrd, pl011_state),
|
|
VMSTATE_UINT32(fbrd, pl011_state),
|
|
VMSTATE_UINT32(ifl, pl011_state),
|
|
VMSTATE_INT32(read_pos, pl011_state),
|
|
VMSTATE_INT32(read_count, pl011_state),
|
|
VMSTATE_INT32(read_trigger, pl011_state),
|
|
VMSTATE_END_OF_LIST()
|
|
}
|
|
};
|
|
|
|
static int pl011_init(SysBusDevice *dev, const unsigned char *id)
|
|
{
|
|
pl011_state *s = FROM_SYSBUS(pl011_state, dev);
|
|
|
|
memory_region_init_io(&s->iomem, &pl011_ops, s, "pl011", 0x1000);
|
|
sysbus_init_mmio_region(dev, &s->iomem);
|
|
sysbus_init_irq(dev, &s->irq);
|
|
s->id = id;
|
|
s->chr = qdev_init_chardev(&dev->qdev);
|
|
|
|
s->read_trigger = 1;
|
|
s->ifl = 0x12;
|
|
s->cr = 0x300;
|
|
s->flags = 0x90;
|
|
if (s->chr) {
|
|
qemu_chr_add_handlers(s->chr, pl011_can_receive, pl011_receive,
|
|
pl011_event, s);
|
|
}
|
|
vmstate_register(&dev->qdev, -1, &vmstate_pl011, s);
|
|
return 0;
|
|
}
|
|
|
|
static int pl011_init_arm(SysBusDevice *dev)
|
|
{
|
|
return pl011_init(dev, pl011_id_arm);
|
|
}
|
|
|
|
static int pl011_init_luminary(SysBusDevice *dev)
|
|
{
|
|
return pl011_init(dev, pl011_id_luminary);
|
|
}
|
|
|
|
static void pl011_register_devices(void)
|
|
{
|
|
sysbus_register_dev("pl011", sizeof(pl011_state),
|
|
pl011_init_arm);
|
|
sysbus_register_dev("pl011_luminary", sizeof(pl011_state),
|
|
pl011_init_luminary);
|
|
}
|
|
|
|
device_init(pl011_register_devices)
|