mirror of
https://github.com/xemu-project/xemu.git
synced 2024-12-05 10:16:50 +00:00
9d7b2670a3
Signed-off-by: Cao jin <caoj.fnst@cn.fujitsu.com> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
162 lines
5.8 KiB
Plaintext
162 lines
5.8 KiB
Plaintext
|
|
USB 2.0 Quick Start
|
|
===================
|
|
|
|
The QEMU EHCI Adapter can be used with and without companion
|
|
controllers. See below for the companion controller mode.
|
|
|
|
When not running in companion controller mode there are two completely
|
|
separate USB busses: One USB 1.1 bus driven by the UHCI controller and
|
|
one USB 2.0 bus driven by the EHCI controller. Devices must be
|
|
attached to the correct controller manually.
|
|
|
|
The '-usb' switch will make qemu create the UHCI controller as part of
|
|
the PIIX3 chipset. The USB 1.1 bus will carry the name "usb-bus.0".
|
|
|
|
You can use the standard -device switch to add a EHCI controller to
|
|
your virtual machine. It is strongly recommended to specify an ID for
|
|
the controller so the USB 2.0 bus gets a individual name, for example
|
|
'-device usb-ehci,id=ehci". This will give you a USB 2.0 bus named
|
|
"ehci.0".
|
|
|
|
I strongly recommend to also use -device to attach usb devices because
|
|
you can specify the bus they should be attached to this way. Here is
|
|
a complete example:
|
|
|
|
qemu -M pc ${otheroptions} \
|
|
-drive if=none,id=usbstick,file=/path/to/image \
|
|
-usb \
|
|
-device usb-ehci,id=ehci \
|
|
-device usb-tablet,bus=usb-bus.0 \
|
|
-device usb-storage,bus=ehci.0,drive=usbstick
|
|
|
|
This attaches a usb tablet to the UHCI adapter and a usb mass storage
|
|
device to the EHCI adapter.
|
|
|
|
|
|
Companion controller support
|
|
----------------------------
|
|
|
|
Companion controller support has been added recently. The operational
|
|
model described above with two completely separate busses still works
|
|
fine. Additionally the UHCI and OHCI controllers got the ability to
|
|
attach to a usb bus created by EHCI as companion controllers. This is
|
|
done by specifying the masterbus and firstport properties. masterbus
|
|
specifies the bus name the controller should attach to. firstport
|
|
specifies the first port the controller should attach to, which is
|
|
needed as usually one ehci controller with six ports has three uhci
|
|
companion controllers with two ports each.
|
|
|
|
There is a config file in docs which will do all this for you, just
|
|
try ...
|
|
|
|
qemu -readconfig docs/ich9-ehci-uhci.cfg
|
|
|
|
... then use "bus=ehci.0" to assign your usb devices to that bus.
|
|
|
|
|
|
xhci controller support
|
|
-----------------------
|
|
|
|
There is also xhci host controller support available. It got a lot
|
|
less testing than ehci and there are a bunch of known limitations, so
|
|
ehci may work better for you. On the other hand the xhci hardware
|
|
design is much more virtualization-friendly, thus xhci emulation uses
|
|
less resources (especially cpu). If you want to give xhci a try
|
|
use this to add the host controller ...
|
|
|
|
qemu -device nec-usb-xhci,id=xhci
|
|
|
|
... then use "bus=xhci.0" when assigning usb devices.
|
|
|
|
|
|
More USB tips & tricks
|
|
======================
|
|
|
|
Recently the usb pass through driver (also known as usb-host) and the
|
|
qemu usb subsystem gained a few capabilities which are available only
|
|
via qdev properties, i,e. when using '-device'.
|
|
|
|
|
|
physical port addressing
|
|
------------------------
|
|
|
|
First you can (for all usb devices) specify the physical port where
|
|
the device will show up in the guest. This can be done using the
|
|
"port" property. UHCI has two root ports (1,2). EHCI has four root
|
|
ports (1-4), the emulated (1.1) USB hub has eight ports.
|
|
|
|
Plugging a tablet into UHCI port 1 works like this:
|
|
|
|
-device usb-tablet,bus=usb-bus.0,port=1
|
|
|
|
Plugging a hub into UHCI port 2 works like this:
|
|
|
|
-device usb-hub,bus=usb-bus.0,port=2
|
|
|
|
Plugging a virtual usb stick into port 4 of the hub just plugged works
|
|
this way:
|
|
|
|
-device usb-storage,bus=usb-bus.0,port=2.4,drive=...
|
|
|
|
You can do basically the same in the monitor using the device_add
|
|
command. If you want to unplug devices too you should specify some
|
|
unique id which you can use to refer to the device ...
|
|
|
|
(qemu) device_add usb-tablet,bus=usb-bus.0,port=1,id=my-tablet
|
|
(qemu) device_del my-tablet
|
|
|
|
... when unplugging it with device_del.
|
|
|
|
|
|
USB pass through hints
|
|
----------------------
|
|
|
|
The usb-host driver has a bunch of properties to specify the device
|
|
which should be passed to the guest:
|
|
|
|
hostbus=<nr> -- Specifies the bus number the device must be attached
|
|
to.
|
|
|
|
hostaddr=<nr> -- Specifies the device address the device got
|
|
assigned by the guest os.
|
|
|
|
hostport=<str> -- Specifies the physical port the device is attached
|
|
to.
|
|
|
|
vendorid=<hexnr> -- Specifies the vendor ID of the device.
|
|
productid=<hexnr> -- Specifies the product ID of the device.
|
|
|
|
In theory you can combine all these properties as you like. In
|
|
practice only a few combinations are useful:
|
|
|
|
(1) vendorid+productid -- match for a specific device, pass it to
|
|
the guest when it shows up somewhere in the host.
|
|
|
|
(2) hostbus+hostport -- match for a specific physical port in the
|
|
host, any device which is plugged in there gets passed to the
|
|
guest.
|
|
|
|
(3) hostbus+hostaddr -- most useful for ad-hoc pass through as the
|
|
hostaddr isn't stable, the next time you plug in the device it
|
|
gets a new one ...
|
|
|
|
Note that USB 1.1 devices are handled by UHCI/OHCI and USB 2.0 by
|
|
EHCI. That means a device plugged into the very same physical port
|
|
may show up on different busses depending on the speed. The port I'm
|
|
using for testing is bus 1 + port 1 for 2.0 devices and bus 3 + port 1
|
|
for 1.1 devices. Passing through any device plugged into that port
|
|
and also assign them to the correct bus can be done this way:
|
|
|
|
qemu -M pc ${otheroptions} \
|
|
-usb \
|
|
-device usb-ehci,id=ehci \
|
|
-device usb-host,bus=usb-bus.0,hostbus=3,hostport=1 \
|
|
-device usb-host,bus=ehci.0,hostbus=1,hostport=1
|
|
|
|
enjoy,
|
|
Gerd
|
|
|
|
--
|
|
Gerd Hoffmann <kraxel@redhat.com>
|