xemu/hw/syborg_serial.c
Alexander Graf 2507c12ab0 Add endianness as io mem parameter
As stated before, devices can be little, big or native endian. The
target endianness is not of their concern, so we need to push things
down a level.

This patch adds a parameter to cpu_register_io_memory that allows a
device to choose its endianness. For now, all devices simply choose
native endian, because that's the same behavior as before.

Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-12-11 15:24:25 +00:00

360 lines
9.7 KiB
C

/*
* Syborg serial port
*
* Copyright (c) 2008 CodeSourcery
*
* Permission is hereby granted, free of charge, to any person obtaining a copy
* of this software and associated documentation files (the "Software"), to deal
* in the Software without restriction, including without limitation the rights
* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
* copies of the Software, and to permit persons to whom the Software is
* furnished to do so, subject to the following conditions:
*
* The above copyright notice and this permission notice shall be included in
* all copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
* THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
* LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
* OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
* THE SOFTWARE.
*/
#include "sysbus.h"
#include "qemu-char.h"
#include "syborg.h"
//#define DEBUG_SYBORG_SERIAL
#ifdef DEBUG_SYBORG_SERIAL
#define DPRINTF(fmt, ...) \
do { printf("syborg_serial: " fmt , ##args); } while (0)
#define BADF(fmt, ...) \
do { fprintf(stderr, "syborg_serial: error: " fmt , ## __VA_ARGS__); \
exit(1);} while (0)
#else
#define DPRINTF(fmt, ...) do {} while(0)
#define BADF(fmt, ...) \
do { fprintf(stderr, "syborg_serial: error: " fmt , ## __VA_ARGS__);} while (0)
#endif
enum {
SERIAL_ID = 0,
SERIAL_DATA = 1,
SERIAL_FIFO_COUNT = 2,
SERIAL_INT_ENABLE = 3,
SERIAL_DMA_TX_ADDR = 4,
SERIAL_DMA_TX_COUNT = 5, /* triggers dma */
SERIAL_DMA_RX_ADDR = 6,
SERIAL_DMA_RX_COUNT = 7, /* triggers dma */
SERIAL_FIFO_SIZE = 8
};
#define SERIAL_INT_FIFO (1u << 0)
#define SERIAL_INT_DMA_TX (1u << 1)
#define SERIAL_INT_DMA_RX (1u << 2)
typedef struct {
SysBusDevice busdev;
uint32_t int_enable;
uint32_t fifo_size;
uint32_t *read_fifo;
int read_pos;
int read_count;
CharDriverState *chr;
qemu_irq irq;
uint32_t dma_tx_ptr;
uint32_t dma_rx_ptr;
uint32_t dma_rx_size;
} SyborgSerialState;
static void syborg_serial_update(SyborgSerialState *s)
{
int level;
level = 0;
if ((s->int_enable & SERIAL_INT_FIFO) && s->read_count)
level = 1;
if (s->int_enable & SERIAL_INT_DMA_TX)
level = 1;
if ((s->int_enable & SERIAL_INT_DMA_RX) && s->dma_rx_size == 0)
level = 1;
qemu_set_irq(s->irq, level);
}
static uint32_t fifo_pop(SyborgSerialState *s)
{
const uint32_t c = s->read_fifo[s->read_pos];
s->read_count--;
s->read_pos++;
if (s->read_pos == s->fifo_size)
s->read_pos = 0;
DPRINTF("FIFO pop %x (%d)\n", c, s->read_count);
return c;
}
static void fifo_push(SyborgSerialState *s, uint32_t new_value)
{
int slot;
DPRINTF("FIFO push %x (%d)\n", new_value, s->read_count);
slot = s->read_pos + s->read_count;
if (slot >= s->fifo_size)
slot -= s->fifo_size;
s->read_fifo[slot] = new_value;
s->read_count++;
}
static void do_dma_tx(SyborgSerialState *s, uint32_t count)
{
unsigned char ch;
if (count == 0)
return;
if (s->chr != NULL) {
/* optimize later. Now, 1 byte per iteration */
while (count--) {
cpu_physical_memory_read(s->dma_tx_ptr, &ch, 1);
qemu_chr_write(s->chr, &ch, 1);
s->dma_tx_ptr++;
}
} else {
s->dma_tx_ptr += count;
}
/* QEMU char backends do not have a nonblocking mode, so we transmit all
the data imediately and the interrupt status will be unchanged. */
}
/* Initiate RX DMA, and transfer data from the FIFO. */
static void dma_rx_start(SyborgSerialState *s, uint32_t len)
{
uint32_t dest;
unsigned char ch;
dest = s->dma_rx_ptr;
if (s->read_count < len) {
s->dma_rx_size = len - s->read_count;
len = s->read_count;
} else {
s->dma_rx_size = 0;
}
while (len--) {
ch = fifo_pop(s);
cpu_physical_memory_write(dest, &ch, 1);
dest++;
}
s->dma_rx_ptr = dest;
syborg_serial_update(s);
}
static uint32_t syborg_serial_read(void *opaque, target_phys_addr_t offset)
{
SyborgSerialState *s = (SyborgSerialState *)opaque;
uint32_t c;
offset &= 0xfff;
DPRINTF("read 0x%x\n", (int)offset);
switch(offset >> 2) {
case SERIAL_ID:
return SYBORG_ID_SERIAL;
case SERIAL_DATA:
if (s->read_count > 0)
c = fifo_pop(s);
else
c = -1;
syborg_serial_update(s);
return c;
case SERIAL_FIFO_COUNT:
return s->read_count;
case SERIAL_INT_ENABLE:
return s->int_enable;
case SERIAL_DMA_TX_ADDR:
return s->dma_tx_ptr;
case SERIAL_DMA_TX_COUNT:
return 0;
case SERIAL_DMA_RX_ADDR:
return s->dma_rx_ptr;
case SERIAL_DMA_RX_COUNT:
return s->dma_rx_size;
case SERIAL_FIFO_SIZE:
return s->fifo_size;
default:
cpu_abort(cpu_single_env, "syborg_serial_read: Bad offset %x\n",
(int)offset);
return 0;
}
}
static void syborg_serial_write(void *opaque, target_phys_addr_t offset,
uint32_t value)
{
SyborgSerialState *s = (SyborgSerialState *)opaque;
unsigned char ch;
offset &= 0xfff;
DPRINTF("Write 0x%x=0x%x\n", (int)offset, value);
switch (offset >> 2) {
case SERIAL_DATA:
ch = value;
if (s->chr)
qemu_chr_write(s->chr, &ch, 1);
break;
case SERIAL_INT_ENABLE:
s->int_enable = value;
syborg_serial_update(s);
break;
case SERIAL_DMA_TX_ADDR:
s->dma_tx_ptr = value;
break;
case SERIAL_DMA_TX_COUNT:
do_dma_tx(s, value);
break;
case SERIAL_DMA_RX_ADDR:
/* For safety, writes to this register cancel any pending DMA. */
s->dma_rx_size = 0;
s->dma_rx_ptr = value;
break;
case SERIAL_DMA_RX_COUNT:
dma_rx_start(s, value);
break;
default:
cpu_abort(cpu_single_env, "syborg_serial_write: Bad offset %x\n",
(int)offset);
break;
}
}
static int syborg_serial_can_receive(void *opaque)
{
SyborgSerialState *s = (SyborgSerialState *)opaque;
if (s->dma_rx_size)
return s->dma_rx_size;
return s->fifo_size - s->read_count;
}
static void syborg_serial_receive(void *opaque, const uint8_t *buf, int size)
{
SyborgSerialState *s = (SyborgSerialState *)opaque;
if (s->dma_rx_size) {
/* Place it in the DMA buffer. */
cpu_physical_memory_write(s->dma_rx_ptr, buf, size);
s->dma_rx_size -= size;
s->dma_rx_ptr += size;
} else {
while (size--)
fifo_push(s, *buf);
}
syborg_serial_update(s);
}
static void syborg_serial_event(void *opaque, int event)
{
/* TODO: Report BREAK events? */
}
static CPUReadMemoryFunc * const syborg_serial_readfn[] = {
syborg_serial_read,
syborg_serial_read,
syborg_serial_read
};
static CPUWriteMemoryFunc * const syborg_serial_writefn[] = {
syborg_serial_write,
syborg_serial_write,
syborg_serial_write
};
static void syborg_serial_save(QEMUFile *f, void *opaque)
{
SyborgSerialState *s = opaque;
int i;
qemu_put_be32(f, s->fifo_size);
qemu_put_be32(f, s->int_enable);
qemu_put_be32(f, s->read_pos);
qemu_put_be32(f, s->read_count);
qemu_put_be32(f, s->dma_tx_ptr);
qemu_put_be32(f, s->dma_rx_ptr);
qemu_put_be32(f, s->dma_rx_size);
for (i = 0; i < s->fifo_size; i++) {
qemu_put_be32(f, s->read_fifo[i]);
}
}
static int syborg_serial_load(QEMUFile *f, void *opaque, int version_id)
{
SyborgSerialState *s = opaque;
int i;
if (version_id != 1)
return -EINVAL;
i = qemu_get_be32(f);
if (s->fifo_size != i)
return -EINVAL;
s->int_enable = qemu_get_be32(f);
s->read_pos = qemu_get_be32(f);
s->read_count = qemu_get_be32(f);
s->dma_tx_ptr = qemu_get_be32(f);
s->dma_rx_ptr = qemu_get_be32(f);
s->dma_rx_size = qemu_get_be32(f);
for (i = 0; i < s->fifo_size; i++) {
s->read_fifo[i] = qemu_get_be32(f);
}
return 0;
}
static int syborg_serial_init(SysBusDevice *dev)
{
SyborgSerialState *s = FROM_SYSBUS(SyborgSerialState, dev);
int iomemtype;
sysbus_init_irq(dev, &s->irq);
iomemtype = cpu_register_io_memory(syborg_serial_readfn,
syborg_serial_writefn, s,
DEVICE_NATIVE_ENDIAN);
sysbus_init_mmio(dev, 0x1000, iomemtype);
s->chr = qdev_init_chardev(&dev->qdev);
if (s->chr) {
qemu_chr_add_handlers(s->chr, syborg_serial_can_receive,
syborg_serial_receive, syborg_serial_event, s);
}
if (s->fifo_size <= 0) {
fprintf(stderr, "syborg_serial: fifo too small\n");
s->fifo_size = 16;
}
s->read_fifo = qemu_mallocz(s->fifo_size * sizeof(s->read_fifo[0]));
register_savevm(&dev->qdev, "syborg_serial", -1, 1,
syborg_serial_save, syborg_serial_load, s);
return 0;
}
static SysBusDeviceInfo syborg_serial_info = {
.init = syborg_serial_init,
.qdev.name = "syborg,serial",
.qdev.size = sizeof(SyborgSerialState),
.qdev.props = (Property[]) {
DEFINE_PROP_UINT32("fifo-size", SyborgSerialState, fifo_size, 16),
DEFINE_PROP_END_OF_LIST(),
}
};
static void syborg_serial_register_devices(void)
{
sysbus_register_withprop(&syborg_serial_info);
}
device_init(syborg_serial_register_devices)