mirror of
https://github.com/xemu-project/xemu.git
synced 2024-11-30 15:00:34 +00:00
b66ff2c298
There are many existing qcow2 images that specify a backing file but no format. This has been the source of CVEs in the past, but has become more prominent of a problem now that libvirt has switched to -blockdev. With older -drive, at least the probing was always done by qemu (so the only risk of a changed format between successive boots of a guest was if qemu was upgraded and probed differently). But with newer -blockdev, libvirt must specify a format; if libvirt guesses raw where the image was formatted, this results in data corruption visible to the guest; conversely, if libvirt guesses qcow2 where qemu was using raw, this can result in potential security holes, so modern libvirt instead refuses to use images without explicit backing format. The change in libvirt to reject images without explicit backing format has pointed out that a number of tools have been far too reliant on probing in the past. It's time to set a better example in our own iotests of properly setting this parameter. iotest calls to create, rebase, and convert are all impacted to some degree. It's a bit annoying that we are inconsistent on command line - while all of those accept -o backing_file=...,backing_fmt=..., the shortcuts are different: create and rebase have -b and -F, while convert has -B but no -F. (amend has no shortcuts, but the previous patch just deprecated the use of amend to change backing chains). Signed-off-by: Eric Blake <eblake@redhat.com> Message-Id: <20200706203954.341758-9-eblake@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
96 lines
4.0 KiB
Plaintext
96 lines
4.0 KiB
Plaintext
QA output created by 039
|
|
|
|
== Checking that image is clean on shutdown ==
|
|
Formatting 'TEST_DIR/t.IMGFMT', fmt=IMGFMT size=134217728
|
|
wrote 512/512 bytes at offset 0
|
|
512 bytes, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
|
|
incompatible_features []
|
|
No errors were found on the image.
|
|
|
|
== Creating a dirty image file ==
|
|
Formatting 'TEST_DIR/t.IMGFMT', fmt=IMGFMT size=134217728
|
|
wrote 512/512 bytes at offset 0
|
|
512 bytes, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
|
|
./common.rc: Killed ( VALGRIND_QEMU="${VALGRIND_QEMU_IO}" _qemu_proc_exec "${VALGRIND_LOGFILE}" "$QEMU_IO_PROG" $QEMU_IO_ARGS "$@" )
|
|
incompatible_features [0]
|
|
ERROR cluster 5 refcount=0 reference=1
|
|
ERROR OFLAG_COPIED data cluster: l2_entry=8000000000050000 refcount=0
|
|
|
|
2 errors were found on the image.
|
|
Data may be corrupted, or further writes to the image may corrupt it.
|
|
|
|
== Read-only access must still work ==
|
|
read 512/512 bytes at offset 0
|
|
512 bytes, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
|
|
incompatible_features [0]
|
|
|
|
== Repairing the image file must succeed ==
|
|
ERROR cluster 5 refcount=0 reference=1
|
|
Rebuilding refcount structure
|
|
Repairing cluster 1 refcount=1 reference=0
|
|
Repairing cluster 2 refcount=1 reference=0
|
|
The following inconsistencies were found and repaired:
|
|
|
|
0 leaked clusters
|
|
1 corruptions
|
|
|
|
Double checking the fixed image now...
|
|
No errors were found on the image.
|
|
incompatible_features []
|
|
|
|
== Data should still be accessible after repair ==
|
|
read 512/512 bytes at offset 0
|
|
512 bytes, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
|
|
|
|
== Opening a dirty image read/write should repair it ==
|
|
Formatting 'TEST_DIR/t.IMGFMT', fmt=IMGFMT size=134217728
|
|
wrote 512/512 bytes at offset 0
|
|
512 bytes, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
|
|
./common.rc: Killed ( VALGRIND_QEMU="${VALGRIND_QEMU_IO}" _qemu_proc_exec "${VALGRIND_LOGFILE}" "$QEMU_IO_PROG" $QEMU_IO_ARGS "$@" )
|
|
incompatible_features [0]
|
|
ERROR cluster 5 refcount=0 reference=1
|
|
Rebuilding refcount structure
|
|
Repairing cluster 1 refcount=1 reference=0
|
|
Repairing cluster 2 refcount=1 reference=0
|
|
wrote 512/512 bytes at offset 0
|
|
512 bytes, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
|
|
incompatible_features []
|
|
|
|
== Creating an image file with lazy_refcounts=off ==
|
|
Formatting 'TEST_DIR/t.IMGFMT', fmt=IMGFMT size=134217728
|
|
wrote 512/512 bytes at offset 0
|
|
512 bytes, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
|
|
./common.rc: Killed ( VALGRIND_QEMU="${VALGRIND_QEMU_IO}" _qemu_proc_exec "${VALGRIND_LOGFILE}" "$QEMU_IO_PROG" $QEMU_IO_ARGS "$@" )
|
|
incompatible_features []
|
|
No errors were found on the image.
|
|
|
|
== Committing to a backing file with lazy_refcounts=on ==
|
|
Formatting 'TEST_DIR/t.IMGFMT.base', fmt=IMGFMT size=134217728
|
|
Formatting 'TEST_DIR/t.IMGFMT', fmt=IMGFMT size=134217728 backing_file=TEST_DIR/t.IMGFMT.base backing_fmt=IMGFMT
|
|
wrote 512/512 bytes at offset 0
|
|
512 bytes, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
|
|
Image committed.
|
|
incompatible_features []
|
|
incompatible_features []
|
|
No errors were found on the image.
|
|
No errors were found on the image.
|
|
|
|
== Changing lazy_refcounts setting at runtime ==
|
|
Formatting 'TEST_DIR/t.IMGFMT', fmt=IMGFMT size=134217728
|
|
wrote 512/512 bytes at offset 0
|
|
512 bytes, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
|
|
./common.rc: Killed ( VALGRIND_QEMU="${VALGRIND_QEMU_IO}" _qemu_proc_exec "${VALGRIND_LOGFILE}" "$QEMU_IO_PROG" $QEMU_IO_ARGS "$@" )
|
|
incompatible_features [0]
|
|
ERROR cluster 5 refcount=0 reference=1
|
|
ERROR OFLAG_COPIED data cluster: l2_entry=8000000000050000 refcount=0
|
|
|
|
2 errors were found on the image.
|
|
Data may be corrupted, or further writes to the image may corrupt it.
|
|
Formatting 'TEST_DIR/t.IMGFMT', fmt=IMGFMT size=134217728
|
|
wrote 512/512 bytes at offset 0
|
|
512 bytes, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
|
|
./common.rc: Killed ( VALGRIND_QEMU="${VALGRIND_QEMU_IO}" _qemu_proc_exec "${VALGRIND_LOGFILE}" "$QEMU_IO_PROG" $QEMU_IO_ARGS "$@" )
|
|
incompatible_features []
|
|
No errors were found on the image.
|
|
*** done
|