xemu/hw/timer/imx_gpt.c
Peter Maydell 6783ecf144 hw: Avoid use of QOM type name macros in VMStateDescriptions
The name field in a VMStateDescription is part of the migration state
versioning, so changing it will break migration.  It's therefore a
bad idea to use a QOM typename macro to initialize it, because in
general we're free to rename QOM types as part of code refactoring
and cleanup.  For the handful of devices that were doing this by
mistake, replace the QOM typenames with the corresponding literal
strings.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
[AF: Use TYPE_PVSCSI for TypeInfo instead]
Signed-off-by: Andreas Färber <afaerber@suse.de>
2013-07-23 00:37:32 +02:00

558 lines
14 KiB
C

/*
* IMX GPT Timer
*
* Copyright (c) 2008 OK Labs
* Copyright (c) 2011 NICTA Pty Ltd
* Originally written by Hans Jiang
* Updated by Peter Chubb
* Updated by Jean-Christophe Dubois
*
* This code is licensed under GPL version 2 or later. See
* the COPYING file in the top-level directory.
*
*/
#include "hw/hw.h"
#include "qemu/bitops.h"
#include "qemu/timer.h"
#include "hw/ptimer.h"
#include "hw/sysbus.h"
#include "hw/arm/imx.h"
#define TYPE_IMX_GPT "imx.gpt"
/*
* Define to 1 for debug messages
*/
#define DEBUG_TIMER 0
#if DEBUG_TIMER
static char const *imx_gpt_reg_name(uint32_t reg)
{
switch (reg) {
case 0:
return "CR";
case 1:
return "PR";
case 2:
return "SR";
case 3:
return "IR";
case 4:
return "OCR1";
case 5:
return "OCR2";
case 6:
return "OCR3";
case 7:
return "ICR1";
case 8:
return "ICR2";
case 9:
return "CNT";
default:
return "[?]";
}
}
# define DPRINTF(fmt, args...) \
do { printf("%s: " fmt , __func__, ##args); } while (0)
#else
# define DPRINTF(fmt, args...) do {} while (0)
#endif
/*
* Define to 1 for messages about attempts to
* access unimplemented registers or similar.
*/
#define DEBUG_IMPLEMENTATION 1
#if DEBUG_IMPLEMENTATION
# define IPRINTF(fmt, args...) \
do { fprintf(stderr, "%s: " fmt, __func__, ##args); } while (0)
#else
# define IPRINTF(fmt, args...) do {} while (0)
#endif
#define IMX_GPT(obj) \
OBJECT_CHECK(IMXGPTState, (obj), TYPE_IMX_GPT)
/*
* GPT : General purpose timer
*
* This timer counts up continuously while it is enabled, resetting itself
* to 0 when it reaches TIMER_MAX (in freerun mode) or when it
* reaches the value of one of the ocrX (in periodic mode).
*/
#define TIMER_MAX 0XFFFFFFFFUL
/* Control register. Not all of these bits have any effect (yet) */
#define GPT_CR_EN (1 << 0) /* GPT Enable */
#define GPT_CR_ENMOD (1 << 1) /* GPT Enable Mode */
#define GPT_CR_DBGEN (1 << 2) /* GPT Debug mode enable */
#define GPT_CR_WAITEN (1 << 3) /* GPT Wait Mode Enable */
#define GPT_CR_DOZEN (1 << 4) /* GPT Doze mode enable */
#define GPT_CR_STOPEN (1 << 5) /* GPT Stop Mode Enable */
#define GPT_CR_CLKSRC_SHIFT (6)
#define GPT_CR_CLKSRC_MASK (0x7)
#define GPT_CR_FRR (1 << 9) /* Freerun or Restart */
#define GPT_CR_SWR (1 << 15) /* Software Reset */
#define GPT_CR_IM1 (3 << 16) /* Input capture channel 1 mode (2 bits) */
#define GPT_CR_IM2 (3 << 18) /* Input capture channel 2 mode (2 bits) */
#define GPT_CR_OM1 (7 << 20) /* Output Compare Channel 1 Mode (3 bits) */
#define GPT_CR_OM2 (7 << 23) /* Output Compare Channel 2 Mode (3 bits) */
#define GPT_CR_OM3 (7 << 26) /* Output Compare Channel 3 Mode (3 bits) */
#define GPT_CR_FO1 (1 << 29) /* Force Output Compare Channel 1 */
#define GPT_CR_FO2 (1 << 30) /* Force Output Compare Channel 2 */
#define GPT_CR_FO3 (1 << 31) /* Force Output Compare Channel 3 */
#define GPT_SR_OF1 (1 << 0)
#define GPT_SR_OF2 (1 << 1)
#define GPT_SR_OF3 (1 << 2)
#define GPT_SR_ROV (1 << 5)
#define GPT_IR_OF1IE (1 << 0)
#define GPT_IR_OF2IE (1 << 1)
#define GPT_IR_OF3IE (1 << 2)
#define GPT_IR_ROVIE (1 << 5)
typedef struct {
SysBusDevice busdev;
ptimer_state *timer;
MemoryRegion iomem;
DeviceState *ccm;
uint32_t cr;
uint32_t pr;
uint32_t sr;
uint32_t ir;
uint32_t ocr1;
uint32_t ocr2;
uint32_t ocr3;
uint32_t icr1;
uint32_t icr2;
uint32_t cnt;
uint32_t next_timeout;
uint32_t next_int;
uint32_t freq;
qemu_irq irq;
} IMXGPTState;
static const VMStateDescription vmstate_imx_timer_gpt = {
.name = "imx.gpt",
.version_id = 3,
.minimum_version_id = 3,
.minimum_version_id_old = 3,
.fields = (VMStateField[]) {
VMSTATE_UINT32(cr, IMXGPTState),
VMSTATE_UINT32(pr, IMXGPTState),
VMSTATE_UINT32(sr, IMXGPTState),
VMSTATE_UINT32(ir, IMXGPTState),
VMSTATE_UINT32(ocr1, IMXGPTState),
VMSTATE_UINT32(ocr2, IMXGPTState),
VMSTATE_UINT32(ocr3, IMXGPTState),
VMSTATE_UINT32(icr1, IMXGPTState),
VMSTATE_UINT32(icr2, IMXGPTState),
VMSTATE_UINT32(cnt, IMXGPTState),
VMSTATE_UINT32(next_timeout, IMXGPTState),
VMSTATE_UINT32(next_int, IMXGPTState),
VMSTATE_UINT32(freq, IMXGPTState),
VMSTATE_PTIMER(timer, IMXGPTState),
VMSTATE_END_OF_LIST()
}
};
static const IMXClk imx_gpt_clocks[] = {
NOCLK, /* 000 No clock source */
IPG, /* 001 ipg_clk, 532MHz*/
IPG, /* 010 ipg_clk_highfreq */
NOCLK, /* 011 not defined */
CLK_32k, /* 100 ipg_clk_32k */
NOCLK, /* 101 not defined */
NOCLK, /* 110 not defined */
NOCLK, /* 111 not defined */
};
static void imx_gpt_set_freq(IMXGPTState *s)
{
uint32_t clksrc = extract32(s->cr, GPT_CR_CLKSRC_SHIFT, 3);
uint32_t freq = imx_clock_frequency(s->ccm, imx_gpt_clocks[clksrc])
/ (1 + s->pr);
s->freq = freq;
DPRINTF("Setting clksrc %d to frequency %d\n", clksrc, freq);
if (freq) {
ptimer_set_freq(s->timer, freq);
}
}
static void imx_gpt_update_int(IMXGPTState *s)
{
if ((s->sr & s->ir) && (s->cr & GPT_CR_EN)) {
qemu_irq_raise(s->irq);
} else {
qemu_irq_lower(s->irq);
}
}
static uint32_t imx_gpt_update_count(IMXGPTState *s)
{
s->cnt = s->next_timeout - (uint32_t)ptimer_get_count(s->timer);
return s->cnt;
}
static inline uint32_t imx_gpt_find_limit(uint32_t count, uint32_t reg,
uint32_t timeout)
{
if ((count < reg) && (timeout > reg)) {
timeout = reg;
}
return timeout;
}
static void imx_gpt_compute_next_timeout(IMXGPTState *s, bool event)
{
uint32_t timeout = TIMER_MAX;
uint32_t count = 0;
long long limit;
if (!(s->cr & GPT_CR_EN)) {
/* if not enabled just return */
return;
}
if (event) {
/* This is a timer event */
if ((s->cr & GPT_CR_FRR) && (s->next_timeout != TIMER_MAX)) {
/*
* if we are in free running mode and we have not reached
* the TIMER_MAX limit, then update the count
*/
count = imx_gpt_update_count(s);
}
} else {
/* not a timer event, then just update the count */
count = imx_gpt_update_count(s);
}
/* now, find the next timeout related to count */
if (s->ir & GPT_IR_OF1IE) {
timeout = imx_gpt_find_limit(count, s->ocr1, timeout);
}
if (s->ir & GPT_IR_OF2IE) {
timeout = imx_gpt_find_limit(count, s->ocr2, timeout);
}
if (s->ir & GPT_IR_OF3IE) {
timeout = imx_gpt_find_limit(count, s->ocr3, timeout);
}
/* find the next set of interrupts to raise for next timer event */
s->next_int = 0;
if ((s->ir & GPT_IR_OF1IE) && (timeout == s->ocr1)) {
s->next_int |= GPT_SR_OF1;
}
if ((s->ir & GPT_IR_OF2IE) && (timeout == s->ocr2)) {
s->next_int |= GPT_SR_OF2;
}
if ((s->ir & GPT_IR_OF3IE) && (timeout == s->ocr3)) {
s->next_int |= GPT_SR_OF3;
}
if ((s->ir & GPT_IR_ROVIE) && (timeout == TIMER_MAX)) {
s->next_int |= GPT_SR_ROV;
}
/* the new range to count down from */
limit = timeout - imx_gpt_update_count(s);
if (limit < 0) {
/*
* if we reach here, then QEMU is running too slow and we pass the
* timeout limit while computing it. Let's deliver the interrupt
* and compute a new limit.
*/
s->sr |= s->next_int;
imx_gpt_compute_next_timeout(s, event);
imx_gpt_update_int(s);
} else {
/* New timeout value */
s->next_timeout = timeout;
/* reset the limit to the computed range */
ptimer_set_limit(s->timer, limit, 1);
}
}
static uint64_t imx_gpt_read(void *opaque, hwaddr offset, unsigned size)
{
IMXGPTState *s = IMX_GPT(opaque);
uint32_t reg_value = 0;
uint32_t reg = offset >> 2;
switch (reg) {
case 0: /* Control Register */
reg_value = s->cr;
break;
case 1: /* prescaler */
reg_value = s->pr;
break;
case 2: /* Status Register */
reg_value = s->sr;
break;
case 3: /* Interrupt Register */
reg_value = s->ir;
break;
case 4: /* Output Compare Register 1 */
reg_value = s->ocr1;
break;
case 5: /* Output Compare Register 2 */
reg_value = s->ocr2;
break;
case 6: /* Output Compare Register 3 */
reg_value = s->ocr3;
break;
case 7: /* input Capture Register 1 */
qemu_log_mask(LOG_UNIMP, "icr1 feature is not implemented\n");
reg_value = s->icr1;
break;
case 8: /* input Capture Register 2 */
qemu_log_mask(LOG_UNIMP, "icr2 feature is not implemented\n");
reg_value = s->icr2;
break;
case 9: /* cnt */
imx_gpt_update_count(s);
reg_value = s->cnt;
break;
default:
IPRINTF("Bad offset %x\n", reg);
break;
}
DPRINTF("(%s) = 0x%08x\n", imx_gpt_reg_name(reg), reg_value);
return reg_value;
}
static void imx_gpt_reset(DeviceState *dev)
{
IMXGPTState *s = IMX_GPT(dev);
/* stop timer */
ptimer_stop(s->timer);
/*
* Soft reset doesn't touch some bits; hard reset clears them
*/
s->cr &= ~(GPT_CR_EN|GPT_CR_ENMOD|GPT_CR_STOPEN|GPT_CR_DOZEN|
GPT_CR_WAITEN|GPT_CR_DBGEN);
s->sr = 0;
s->pr = 0;
s->ir = 0;
s->cnt = 0;
s->ocr1 = TIMER_MAX;
s->ocr2 = TIMER_MAX;
s->ocr3 = TIMER_MAX;
s->icr1 = 0;
s->icr2 = 0;
s->next_timeout = TIMER_MAX;
s->next_int = 0;
/* compute new freq */
imx_gpt_set_freq(s);
/* reset the limit to TIMER_MAX */
ptimer_set_limit(s->timer, TIMER_MAX, 1);
/* if the timer is still enabled, restart it */
if (s->freq && (s->cr & GPT_CR_EN)) {
ptimer_run(s->timer, 1);
}
}
static void imx_gpt_write(void *opaque, hwaddr offset, uint64_t value,
unsigned size)
{
IMXGPTState *s = IMX_GPT(opaque);
uint32_t oldreg;
uint32_t reg = offset >> 2;
DPRINTF("(%s, value = 0x%08x)\n", imx_gpt_reg_name(reg),
(uint32_t)value);
switch (reg) {
case 0:
oldreg = s->cr;
s->cr = value & ~0x7c14;
if (s->cr & GPT_CR_SWR) { /* force reset */
/* handle the reset */
imx_gpt_reset(DEVICE(s));
} else {
/* set our freq, as the source might have changed */
imx_gpt_set_freq(s);
if ((oldreg ^ s->cr) & GPT_CR_EN) {
if (s->cr & GPT_CR_EN) {
if (s->cr & GPT_CR_ENMOD) {
s->next_timeout = TIMER_MAX;
ptimer_set_count(s->timer, TIMER_MAX);
imx_gpt_compute_next_timeout(s, false);
}
ptimer_run(s->timer, 1);
} else {
/* stop timer */
ptimer_stop(s->timer);
}
}
}
break;
case 1: /* Prescaler */
s->pr = value & 0xfff;
imx_gpt_set_freq(s);
break;
case 2: /* SR */
s->sr &= ~(value & 0x3f);
imx_gpt_update_int(s);
break;
case 3: /* IR -- interrupt register */
s->ir = value & 0x3f;
imx_gpt_update_int(s);
imx_gpt_compute_next_timeout(s, false);
break;
case 4: /* OCR1 -- output compare register */
s->ocr1 = value;
/* In non-freerun mode, reset count when this register is written */
if (!(s->cr & GPT_CR_FRR)) {
s->next_timeout = TIMER_MAX;
ptimer_set_limit(s->timer, TIMER_MAX, 1);
}
/* compute the new timeout */
imx_gpt_compute_next_timeout(s, false);
break;
case 5: /* OCR2 -- output compare register */
s->ocr2 = value;
/* compute the new timeout */
imx_gpt_compute_next_timeout(s, false);
break;
case 6: /* OCR3 -- output compare register */
s->ocr3 = value;
/* compute the new timeout */
imx_gpt_compute_next_timeout(s, false);
break;
default:
IPRINTF("Bad offset %x\n", reg);
break;
}
}
static void imx_gpt_timeout(void *opaque)
{
IMXGPTState *s = IMX_GPT(opaque);
DPRINTF("\n");
s->sr |= s->next_int;
s->next_int = 0;
imx_gpt_compute_next_timeout(s, true);
imx_gpt_update_int(s);
if (s->freq && (s->cr & GPT_CR_EN)) {
ptimer_run(s->timer, 1);
}
}
static const MemoryRegionOps imx_gpt_ops = {
.read = imx_gpt_read,
.write = imx_gpt_write,
.endianness = DEVICE_NATIVE_ENDIAN,
};
static void imx_gpt_realize(DeviceState *dev, Error **errp)
{
IMXGPTState *s = IMX_GPT(dev);
SysBusDevice *sbd = SYS_BUS_DEVICE(dev);
QEMUBH *bh;
sysbus_init_irq(sbd, &s->irq);
memory_region_init_io(&s->iomem, OBJECT(s), &imx_gpt_ops, s, TYPE_IMX_GPT,
0x00001000);
sysbus_init_mmio(sbd, &s->iomem);
bh = qemu_bh_new(imx_gpt_timeout, s);
s->timer = ptimer_init(bh);
}
void imx_timerg_create(const hwaddr addr, qemu_irq irq, DeviceState *ccm)
{
IMXGPTState *pp;
DeviceState *dev;
dev = sysbus_create_simple(TYPE_IMX_GPT, addr, irq);
pp = IMX_GPT(dev);
pp->ccm = ccm;
}
static void imx_gpt_class_init(ObjectClass *klass, void *data)
{
DeviceClass *dc = DEVICE_CLASS(klass);
dc->realize = imx_gpt_realize;
dc->reset = imx_gpt_reset;
dc->vmsd = &vmstate_imx_timer_gpt;
dc->desc = "i.MX general timer";
}
static const TypeInfo imx_gpt_info = {
.name = TYPE_IMX_GPT,
.parent = TYPE_SYS_BUS_DEVICE,
.instance_size = sizeof(IMXGPTState),
.class_init = imx_gpt_class_init,
};
static void imx_gpt_register_types(void)
{
type_register_static(&imx_gpt_info);
}
type_init(imx_gpt_register_types)