xemu-project/xemu
1
0
Fork 0
mirror of https://github.com/xemu-project/xemu.git synced 2024-11-27 13:30:52 +00:00
Code Issues Actions Packages Projects Releases Wiki Activity
25da6e3113
xemu/hw/arm/fsl-imx6ul.c
Peter Maydell ae2474f118 hw/arm: imx: Don't enable PSCI conduit when booting guest in EL3 
Change the iMX-SoC based boards to use the new boot.c functionality
to allow us to enable psci-conduit only if the guest is being booted
in EL1 or EL2, so that if the user runs guest EL3 firmware code our
PSCI emulation doesn't get in its way.

To do this we stop setting the psci-conduit property on the CPU
objects in the SoC code, and instead set the psci_conduit field in
the arm_boot_info struct to tell the common boot loader code that
we'd like PSCI if the guest is starting at an EL that it makes
sense with.

This affects the mcimx6ul-evk and mcimx7d-sabre boards.

Note that for the mcimx7d board, this means that when running guest
code at EL3 there is currently no way to power on the secondary CPUs,
because we do not currently have a model of the system reset
controller module which should be used to do that for the imx7 SoC,
only for the imx6 SoC.  (Previously EL3 code which knew it was
running on QEMU could use a PSCI call to do this.) This doesn't
affect the imx6ul-evk board because it is uniprocessor.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Tested-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Tested-by: Cédric Le Goater <clg@kaod.org>
Acked-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220127154639.2090164-5-peter.maydell@linaro.org
2022-02-08 10:56:27 +00:00

650 lines
20 KiB
C
Raw Blame History

/*
* Copyright (c) 2018 Jean-Christophe Dubois <jcd@tribudubois.net>
*
* i.MX6UL SOC emulation.
*
* Based on hw/arm/fsl-imx7.c
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*/
#include "qemu/osdep.h"
#include "qapi/error.h"
#include "hw/arm/fsl-imx6ul.h"
#include "hw/misc/unimp.h"
#include "hw/usb/imx-usb-phy.h"
#include "hw/boards.h"
#include "sysemu/sysemu.h"
#include "qemu/error-report.h"
#include "qemu/module.h"
#define NAME_SIZE 20
static void fsl_imx6ul_init(Object *obj)
{
FslIMX6ULState *s = FSL_IMX6UL(obj);
char name[NAME_SIZE];
int i;
object_initialize_child(obj, "cpu0", &s->cpu,
ARM_CPU_TYPE_NAME("cortex-a7"));
/*
* A7MPCORE
*/
object_initialize_child(obj, "a7mpcore", &s->a7mpcore,
TYPE_A15MPCORE_PRIV);
/*
* CCM
*/
object_initialize_child(obj, "ccm", &s->ccm, TYPE_IMX6UL_CCM);
/*
* SRC
*/
object_initialize_child(obj, "src", &s->src, TYPE_IMX6_SRC);
/*
* GPCv2
*/
object_initialize_child(obj, "gpcv2", &s->gpcv2, TYPE_IMX_GPCV2);
/*
* SNVS
*/
object_initialize_child(obj, "snvs", &s->snvs, TYPE_IMX7_SNVS);
/*
* GPR
*/
object_initialize_child(obj, "gpr", &s->gpr, TYPE_IMX7_GPR);
/*
* GPIOs 1 to 5
*/
for (i = 0; i < FSL_IMX6UL_NUM_GPIOS; i++) {
snprintf(name, NAME_SIZE, "gpio%d", i);
object_initialize_child(obj, name, &s->gpio[i], TYPE_IMX_GPIO);
}
/*
* GPT 1, 2
*/
for (i = 0; i < FSL_IMX6UL_NUM_GPTS; i++) {
snprintf(name, NAME_SIZE, "gpt%d", i);
object_initialize_child(obj, name, &s->gpt[i], TYPE_IMX7_GPT);
}
/*
* EPIT 1, 2
*/
for (i = 0; i < FSL_IMX6UL_NUM_EPITS; i++) {
snprintf(name, NAME_SIZE, "epit%d", i + 1);
object_initialize_child(obj, name, &s->epit[i], TYPE_IMX_EPIT);
}
/*
* eCSPI
*/
for (i = 0; i < FSL_IMX6UL_NUM_ECSPIS; i++) {
snprintf(name, NAME_SIZE, "spi%d", i + 1);
object_initialize_child(obj, name, &s->spi[i], TYPE_IMX_SPI);
}
/*
* I2C
*/
for (i = 0; i < FSL_IMX6UL_NUM_I2CS; i++) {
snprintf(name, NAME_SIZE, "i2c%d", i + 1);
object_initialize_child(obj, name, &s->i2c[i], TYPE_IMX_I2C);
}
/*
* UART
*/
for (i = 0; i < FSL_IMX6UL_NUM_UARTS; i++) {
snprintf(name, NAME_SIZE, "uart%d", i);
object_initialize_child(obj, name, &s->uart[i], TYPE_IMX_SERIAL);
}
/*
* Ethernet
*/
for (i = 0; i < FSL_IMX6UL_NUM_ETHS; i++) {
snprintf(name, NAME_SIZE, "eth%d", i);
object_initialize_child(obj, name, &s->eth[i], TYPE_IMX_ENET);
}
/* USB */
for (i = 0; i < FSL_IMX6UL_NUM_USB_PHYS; i++) {
snprintf(name, NAME_SIZE, "usbphy%d", i);
object_initialize_child(obj, name, &s->usbphy[i], TYPE_IMX_USBPHY);
}
for (i = 0; i < FSL_IMX6UL_NUM_USBS; i++) {
snprintf(name, NAME_SIZE, "usb%d", i);
object_initialize_child(obj, name, &s->usb[i], TYPE_CHIPIDEA);
}
/*
* SDHCI
*/
for (i = 0; i < FSL_IMX6UL_NUM_USDHCS; i++) {
snprintf(name, NAME_SIZE, "usdhc%d", i);
object_initialize_child(obj, name, &s->usdhc[i], TYPE_IMX_USDHC);
}
/*
* Watchdog
*/
for (i = 0; i < FSL_IMX6UL_NUM_WDTS; i++) {
snprintf(name, NAME_SIZE, "wdt%d", i);
object_initialize_child(obj, name, &s->wdt[i], TYPE_IMX2_WDT);
}
}
static void fsl_imx6ul_realize(DeviceState *dev, Error **errp)
{
MachineState *ms = MACHINE(qdev_get_machine());
FslIMX6ULState *s = FSL_IMX6UL(dev);
int i;
char name[NAME_SIZE];
SysBusDevice *sbd;
DeviceState *d;
if (ms->smp.cpus > 1) {
error_setg(errp, "%s: Only a single CPU is supported (%d requested)",
TYPE_FSL_IMX6UL, ms->smp.cpus);
return;
}
qdev_realize(DEVICE(&s->cpu), NULL, &error_abort);
/*
* A7MPCORE
*/
object_property_set_int(OBJECT(&s->a7mpcore), "num-cpu", 1, &error_abort);
object_property_set_int(OBJECT(&s->a7mpcore), "num-irq",
FSL_IMX6UL_MAX_IRQ + GIC_INTERNAL, &error_abort);
sysbus_realize(SYS_BUS_DEVICE(&s->a7mpcore), &error_abort);
sysbus_mmio_map(SYS_BUS_DEVICE(&s->a7mpcore), 0, FSL_IMX6UL_A7MPCORE_ADDR);
sbd = SYS_BUS_DEVICE(&s->a7mpcore);
d = DEVICE(&s->cpu);
sysbus_connect_irq(sbd, 0, qdev_get_gpio_in(d, ARM_CPU_IRQ));
sysbus_connect_irq(sbd, 1, qdev_get_gpio_in(d, ARM_CPU_FIQ));
sysbus_connect_irq(sbd, 2, qdev_get_gpio_in(d, ARM_CPU_VIRQ));
sysbus_connect_irq(sbd, 3, qdev_get_gpio_in(d, ARM_CPU_VFIQ));
/*
* A7MPCORE DAP
*/
create_unimplemented_device("a7mpcore-dap", FSL_IMX6UL_A7MPCORE_DAP_ADDR,
0x100000);
/*
* GPT 1, 2
*/
for (i = 0; i < FSL_IMX6UL_NUM_GPTS; i++) {
static const hwaddr FSL_IMX6UL_GPTn_ADDR[FSL_IMX6UL_NUM_GPTS] = {
FSL_IMX6UL_GPT1_ADDR,
FSL_IMX6UL_GPT2_ADDR,
};
static const int FSL_IMX6UL_GPTn_IRQ[FSL_IMX6UL_NUM_GPTS] = {
FSL_IMX6UL_GPT1_IRQ,
FSL_IMX6UL_GPT2_IRQ,
};
s->gpt[i].ccm = IMX_CCM(&s->ccm);
sysbus_realize(SYS_BUS_DEVICE(&s->gpt[i]), &error_abort);
sysbus_mmio_map(SYS_BUS_DEVICE(&s->gpt[i]), 0,
FSL_IMX6UL_GPTn_ADDR[i]);
sysbus_connect_irq(SYS_BUS_DEVICE(&s->gpt[i]), 0,
qdev_get_gpio_in(DEVICE(&s->a7mpcore),
FSL_IMX6UL_GPTn_IRQ[i]));
}
/*
* EPIT 1, 2
*/
for (i = 0; i < FSL_IMX6UL_NUM_EPITS; i++) {
static const hwaddr FSL_IMX6UL_EPITn_ADDR[FSL_IMX6UL_NUM_EPITS] = {
FSL_IMX6UL_EPIT1_ADDR,
FSL_IMX6UL_EPIT2_ADDR,
};
static const int FSL_IMX6UL_EPITn_IRQ[FSL_IMX6UL_NUM_EPITS] = {
FSL_IMX6UL_EPIT1_IRQ,
FSL_IMX6UL_EPIT2_IRQ,
};
s->epit[i].ccm = IMX_CCM(&s->ccm);
sysbus_realize(SYS_BUS_DEVICE(&s->epit[i]), &error_abort);
sysbus_mmio_map(SYS_BUS_DEVICE(&s->epit[i]), 0,
FSL_IMX6UL_EPITn_ADDR[i]);
sysbus_connect_irq(SYS_BUS_DEVICE(&s->epit[i]), 0,
qdev_get_gpio_in(DEVICE(&s->a7mpcore),
FSL_IMX6UL_EPITn_IRQ[i]));
}
/*
* GPIO
*/
for (i = 0; i < FSL_IMX6UL_NUM_GPIOS; i++) {
static const hwaddr FSL_IMX6UL_GPIOn_ADDR[FSL_IMX6UL_NUM_GPIOS] = {
FSL_IMX6UL_GPIO1_ADDR,
FSL_IMX6UL_GPIO2_ADDR,
FSL_IMX6UL_GPIO3_ADDR,
FSL_IMX6UL_GPIO4_ADDR,
FSL_IMX6UL_GPIO5_ADDR,
};
static const int FSL_IMX6UL_GPIOn_LOW_IRQ[FSL_IMX6UL_NUM_GPIOS] = {
FSL_IMX6UL_GPIO1_LOW_IRQ,
FSL_IMX6UL_GPIO2_LOW_IRQ,
FSL_IMX6UL_GPIO3_LOW_IRQ,
FSL_IMX6UL_GPIO4_LOW_IRQ,
FSL_IMX6UL_GPIO5_LOW_IRQ,
};
static const int FSL_IMX6UL_GPIOn_HIGH_IRQ[FSL_IMX6UL_NUM_GPIOS] = {
FSL_IMX6UL_GPIO1_HIGH_IRQ,
FSL_IMX6UL_GPIO2_HIGH_IRQ,
FSL_IMX6UL_GPIO3_HIGH_IRQ,
FSL_IMX6UL_GPIO4_HIGH_IRQ,
FSL_IMX6UL_GPIO5_HIGH_IRQ,
};
sysbus_realize(SYS_BUS_DEVICE(&s->gpio[i]), &error_abort);
sysbus_mmio_map(SYS_BUS_DEVICE(&s->gpio[i]), 0,
FSL_IMX6UL_GPIOn_ADDR[i]);
sysbus_connect_irq(SYS_BUS_DEVICE(&s->gpio[i]), 0,
qdev_get_gpio_in(DEVICE(&s->a7mpcore),
FSL_IMX6UL_GPIOn_LOW_IRQ[i]));
sysbus_connect_irq(SYS_BUS_DEVICE(&s->gpio[i]), 1,
qdev_get_gpio_in(DEVICE(&s->a7mpcore),
FSL_IMX6UL_GPIOn_HIGH_IRQ[i]));
}
/*
* IOMUXC and IOMUXC_GPR
*/
for (i = 0; i < 1; i++) {
static const hwaddr FSL_IMX6UL_IOMUXCn_ADDR[FSL_IMX6UL_NUM_IOMUXCS] = {
FSL_IMX6UL_IOMUXC_ADDR,
FSL_IMX6UL_IOMUXC_GPR_ADDR,
};
snprintf(name, NAME_SIZE, "iomuxc%d", i);
create_unimplemented_device(name, FSL_IMX6UL_IOMUXCn_ADDR[i], 0x4000);
}
/*
* CCM
*/
sysbus_realize(SYS_BUS_DEVICE(&s->ccm), &error_abort);
sysbus_mmio_map(SYS_BUS_DEVICE(&s->ccm), 0, FSL_IMX6UL_CCM_ADDR);
/*
* SRC
*/
sysbus_realize(SYS_BUS_DEVICE(&s->src), &error_abort);
sysbus_mmio_map(SYS_BUS_DEVICE(&s->src), 0, FSL_IMX6UL_SRC_ADDR);
/*
* GPCv2
*/
sysbus_realize(SYS_BUS_DEVICE(&s->gpcv2), &error_abort);
sysbus_mmio_map(SYS_BUS_DEVICE(&s->gpcv2), 0, FSL_IMX6UL_GPC_ADDR);
/* Initialize all ECSPI */
for (i = 0; i < FSL_IMX6UL_NUM_ECSPIS; i++) {
static const hwaddr FSL_IMX6UL_SPIn_ADDR[FSL_IMX6UL_NUM_ECSPIS] = {
FSL_IMX6UL_ECSPI1_ADDR,
FSL_IMX6UL_ECSPI2_ADDR,
FSL_IMX6UL_ECSPI3_ADDR,
FSL_IMX6UL_ECSPI4_ADDR,
};
static const int FSL_IMX6UL_SPIn_IRQ[FSL_IMX6UL_NUM_ECSPIS] = {
FSL_IMX6UL_ECSPI1_IRQ,
FSL_IMX6UL_ECSPI2_IRQ,
FSL_IMX6UL_ECSPI3_IRQ,
FSL_IMX6UL_ECSPI4_IRQ,
};
/* Initialize the SPI */
sysbus_realize(SYS_BUS_DEVICE(&s->spi[i]), &error_abort);
sysbus_mmio_map(SYS_BUS_DEVICE(&s->spi[i]), 0,
FSL_IMX6UL_SPIn_ADDR[i]);
sysbus_connect_irq(SYS_BUS_DEVICE(&s->spi[i]), 0,
qdev_get_gpio_in(DEVICE(&s->a7mpcore),
FSL_IMX6UL_SPIn_IRQ[i]));
}
/*
* I2C
*/
for (i = 0; i < FSL_IMX6UL_NUM_I2CS; i++) {
static const hwaddr FSL_IMX6UL_I2Cn_ADDR[FSL_IMX6UL_NUM_I2CS] = {
FSL_IMX6UL_I2C1_ADDR,
FSL_IMX6UL_I2C2_ADDR,
FSL_IMX6UL_I2C3_ADDR,
FSL_IMX6UL_I2C4_ADDR,
};
static const int FSL_IMX6UL_I2Cn_IRQ[FSL_IMX6UL_NUM_I2CS] = {
FSL_IMX6UL_I2C1_IRQ,
FSL_IMX6UL_I2C2_IRQ,
FSL_IMX6UL_I2C3_IRQ,
FSL_IMX6UL_I2C4_IRQ,
};
sysbus_realize(SYS_BUS_DEVICE(&s->i2c[i]), &error_abort);
sysbus_mmio_map(SYS_BUS_DEVICE(&s->i2c[i]), 0, FSL_IMX6UL_I2Cn_ADDR[i]);
sysbus_connect_irq(SYS_BUS_DEVICE(&s->i2c[i]), 0,
qdev_get_gpio_in(DEVICE(&s->a7mpcore),
FSL_IMX6UL_I2Cn_IRQ[i]));
}
/*
* UART
*/
for (i = 0; i < FSL_IMX6UL_NUM_UARTS; i++) {
static const hwaddr FSL_IMX6UL_UARTn_ADDR[FSL_IMX6UL_NUM_UARTS] = {
FSL_IMX6UL_UART1_ADDR,
FSL_IMX6UL_UART2_ADDR,
FSL_IMX6UL_UART3_ADDR,
FSL_IMX6UL_UART4_ADDR,
FSL_IMX6UL_UART5_ADDR,
FSL_IMX6UL_UART6_ADDR,
FSL_IMX6UL_UART7_ADDR,
FSL_IMX6UL_UART8_ADDR,
};
static const int FSL_IMX6UL_UARTn_IRQ[FSL_IMX6UL_NUM_UARTS] = {
FSL_IMX6UL_UART1_IRQ,
FSL_IMX6UL_UART2_IRQ,
FSL_IMX6UL_UART3_IRQ,
FSL_IMX6UL_UART4_IRQ,
FSL_IMX6UL_UART5_IRQ,
FSL_IMX6UL_UART6_IRQ,
FSL_IMX6UL_UART7_IRQ,
FSL_IMX6UL_UART8_IRQ,
};
qdev_prop_set_chr(DEVICE(&s->uart[i]), "chardev", serial_hd(i));
sysbus_realize(SYS_BUS_DEVICE(&s->uart[i]), &error_abort);
sysbus_mmio_map(SYS_BUS_DEVICE(&s->uart[i]), 0,
FSL_IMX6UL_UARTn_ADDR[i]);
sysbus_connect_irq(SYS_BUS_DEVICE(&s->uart[i]), 0,
qdev_get_gpio_in(DEVICE(&s->a7mpcore),
FSL_IMX6UL_UARTn_IRQ[i]));
}
/*
* Ethernet
*/
for (i = 0; i < FSL_IMX6UL_NUM_ETHS; i++) {
static const hwaddr FSL_IMX6UL_ENETn_ADDR[FSL_IMX6UL_NUM_ETHS] = {
FSL_IMX6UL_ENET1_ADDR,
FSL_IMX6UL_ENET2_ADDR,
};
static const int FSL_IMX6UL_ENETn_IRQ[FSL_IMX6UL_NUM_ETHS] = {
FSL_IMX6UL_ENET1_IRQ,
FSL_IMX6UL_ENET2_IRQ,
};
static const int FSL_IMX6UL_ENETn_TIMER_IRQ[FSL_IMX6UL_NUM_ETHS] = {
FSL_IMX6UL_ENET1_TIMER_IRQ,
FSL_IMX6UL_ENET2_TIMER_IRQ,
};
object_property_set_uint(OBJECT(&s->eth[i]), "phy-num",
s->phy_num[i], &error_abort);
object_property_set_uint(OBJECT(&s->eth[i]), "tx-ring-num",
FSL_IMX6UL_ETH_NUM_TX_RINGS, &error_abort);
qdev_set_nic_properties(DEVICE(&s->eth[i]), &nd_table[i]);
sysbus_realize(SYS_BUS_DEVICE(&s->eth[i]), &error_abort);
sysbus_mmio_map(SYS_BUS_DEVICE(&s->eth[i]), 0,
FSL_IMX6UL_ENETn_ADDR[i]);
sysbus_connect_irq(SYS_BUS_DEVICE(&s->eth[i]), 0,
qdev_get_gpio_in(DEVICE(&s->a7mpcore),
FSL_IMX6UL_ENETn_IRQ[i]));
sysbus_connect_irq(SYS_BUS_DEVICE(&s->eth[i]), 1,
qdev_get_gpio_in(DEVICE(&s->a7mpcore),
FSL_IMX6UL_ENETn_TIMER_IRQ[i]));
}
/* USB */
for (i = 0; i < FSL_IMX6UL_NUM_USB_PHYS; i++) {
sysbus_realize(SYS_BUS_DEVICE(&s->usbphy[i]), &error_abort);
sysbus_mmio_map(SYS_BUS_DEVICE(&s->usbphy[i]), 0,
FSL_IMX6UL_USBPHY1_ADDR + i * 0x1000);
}
for (i = 0; i < FSL_IMX6UL_NUM_USBS; i++) {
static const int FSL_IMX6UL_USBn_IRQ[] = {
FSL_IMX6UL_USB1_IRQ,
FSL_IMX6UL_USB2_IRQ,
};
sysbus_realize(SYS_BUS_DEVICE(&s->usb[i]), &error_abort);
sysbus_mmio_map(SYS_BUS_DEVICE(&s->usb[i]), 0,
FSL_IMX6UL_USBO2_USB_ADDR + i * 0x200);
sysbus_connect_irq(SYS_BUS_DEVICE(&s->usb[i]), 0,
qdev_get_gpio_in(DEVICE(&s->a7mpcore),
FSL_IMX6UL_USBn_IRQ[i]));
}
/*
* USDHC
*/
for (i = 0; i < FSL_IMX6UL_NUM_USDHCS; i++) {
static const hwaddr FSL_IMX6UL_USDHCn_ADDR[FSL_IMX6UL_NUM_USDHCS] = {
FSL_IMX6UL_USDHC1_ADDR,
FSL_IMX6UL_USDHC2_ADDR,
};
static const int FSL_IMX6UL_USDHCn_IRQ[FSL_IMX6UL_NUM_USDHCS] = {
FSL_IMX6UL_USDHC1_IRQ,
FSL_IMX6UL_USDHC2_IRQ,
};
object_property_set_uint(OBJECT(&s->usdhc[i]), "vendor",
SDHCI_VENDOR_IMX, &error_abort);
sysbus_realize(SYS_BUS_DEVICE(&s->usdhc[i]), &error_abort);
sysbus_mmio_map(SYS_BUS_DEVICE(&s->usdhc[i]), 0,
FSL_IMX6UL_USDHCn_ADDR[i]);
sysbus_connect_irq(SYS_BUS_DEVICE(&s->usdhc[i]), 0,
qdev_get_gpio_in(DEVICE(&s->a7mpcore),
FSL_IMX6UL_USDHCn_IRQ[i]));
}
/*
* SNVS
*/
sysbus_realize(SYS_BUS_DEVICE(&s->snvs), &error_abort);
sysbus_mmio_map(SYS_BUS_DEVICE(&s->snvs), 0, FSL_IMX6UL_SNVS_HP_ADDR);
/*
* Watchdog
*/
for (i = 0; i < FSL_IMX6UL_NUM_WDTS; i++) {
static const hwaddr FSL_IMX6UL_WDOGn_ADDR[FSL_IMX6UL_NUM_WDTS] = {
FSL_IMX6UL_WDOG1_ADDR,
FSL_IMX6UL_WDOG2_ADDR,
FSL_IMX6UL_WDOG3_ADDR,
};
static const int FSL_IMX6UL_WDOGn_IRQ[FSL_IMX6UL_NUM_WDTS] = {
FSL_IMX6UL_WDOG1_IRQ,
FSL_IMX6UL_WDOG2_IRQ,
FSL_IMX6UL_WDOG3_IRQ,
};
object_property_set_bool(OBJECT(&s->wdt[i]), "pretimeout-support",
true, &error_abort);
sysbus_realize(SYS_BUS_DEVICE(&s->wdt[i]), &error_abort);
sysbus_mmio_map(SYS_BUS_DEVICE(&s->wdt[i]), 0,
FSL_IMX6UL_WDOGn_ADDR[i]);
sysbus_connect_irq(SYS_BUS_DEVICE(&s->wdt[i]), 0,
qdev_get_gpio_in(DEVICE(&s->a7mpcore),
FSL_IMX6UL_WDOGn_IRQ[i]));
}
/*
* GPR
*/
sysbus_realize(SYS_BUS_DEVICE(&s->gpr), &error_abort);
sysbus_mmio_map(SYS_BUS_DEVICE(&s->gpr), 0, FSL_IMX6UL_IOMUXC_GPR_ADDR);
/*
* SDMA
*/
create_unimplemented_device("sdma", FSL_IMX6UL_SDMA_ADDR, 0x4000);
/*
* SAI (Audio SSI (Synchronous Serial Interface))
*/
create_unimplemented_device("sai1", FSL_IMX6UL_SAI1_ADDR, 0x4000);
create_unimplemented_device("sai2", FSL_IMX6UL_SAI2_ADDR, 0x4000);
create_unimplemented_device("sai3", FSL_IMX6UL_SAI3_ADDR, 0x4000);
/*
* PWM
*/
create_unimplemented_device("pwm1", FSL_IMX6UL_PWM1_ADDR, 0x4000);
create_unimplemented_device("pwm2", FSL_IMX6UL_PWM2_ADDR, 0x4000);
create_unimplemented_device("pwm3", FSL_IMX6UL_PWM3_ADDR, 0x4000);
create_unimplemented_device("pwm4", FSL_IMX6UL_PWM4_ADDR, 0x4000);
/*
* Audio ASRC (asynchronous sample rate converter)
*/
create_unimplemented_device("asrc", FSL_IMX6UL_ASRC_ADDR, 0x4000);
/*
* CAN
*/
create_unimplemented_device("can1", FSL_IMX6UL_CAN1_ADDR, 0x4000);
create_unimplemented_device("can2", FSL_IMX6UL_CAN2_ADDR, 0x4000);
/*
* APHB_DMA
*/
create_unimplemented_device("aphb_dma", FSL_IMX6UL_APBH_DMA_ADDR,
FSL_IMX6UL_APBH_DMA_SIZE);
/*
* ADCs
*/
for (i = 0; i < FSL_IMX6UL_NUM_ADCS; i++) {
static const hwaddr FSL_IMX6UL_ADCn_ADDR[FSL_IMX6UL_NUM_ADCS] = {
FSL_IMX6UL_ADC1_ADDR,
FSL_IMX6UL_ADC2_ADDR,
};
snprintf(name, NAME_SIZE, "adc%d", i);
create_unimplemented_device(name, FSL_IMX6UL_ADCn_ADDR[i], 0x4000);
}
/*
* LCD
*/
create_unimplemented_device("lcdif", FSL_IMX6UL_LCDIF_ADDR, 0x4000);
/*
* ROM memory
*/
memory_region_init_rom(&s->rom, OBJECT(dev), "imx6ul.rom",
FSL_IMX6UL_ROM_SIZE, &error_abort);
memory_region_add_subregion(get_system_memory(), FSL_IMX6UL_ROM_ADDR,
&s->rom);
/*
* CAAM memory
*/
memory_region_init_rom(&s->caam, OBJECT(dev), "imx6ul.caam",
FSL_IMX6UL_CAAM_MEM_SIZE, &error_abort);
memory_region_add_subregion(get_system_memory(), FSL_IMX6UL_CAAM_MEM_ADDR,
&s->caam);
/*
* OCRAM memory
*/
memory_region_init_ram(&s->ocram, NULL, "imx6ul.ocram",
FSL_IMX6UL_OCRAM_MEM_SIZE,
&error_abort);
memory_region_add_subregion(get_system_memory(), FSL_IMX6UL_OCRAM_MEM_ADDR,
&s->ocram);
/*
* internal OCRAM (128 KB) is aliased over 512 KB
*/
memory_region_init_alias(&s->ocram_alias, OBJECT(dev),
"imx6ul.ocram_alias", &s->ocram, 0,
FSL_IMX6UL_OCRAM_ALIAS_SIZE);
memory_region_add_subregion(get_system_memory(),
FSL_IMX6UL_OCRAM_ALIAS_ADDR, &s->ocram_alias);
}
static Property fsl_imx6ul_properties[] = {
DEFINE_PROP_UINT32("fec1-phy-num", FslIMX6ULState, phy_num[0], 0),
DEFINE_PROP_UINT32("fec2-phy-num", FslIMX6ULState, phy_num[1], 1),
DEFINE_PROP_END_OF_LIST(),
};
static void fsl_imx6ul_class_init(ObjectClass *oc, void *data)
{
DeviceClass *dc = DEVICE_CLASS(oc);
device_class_set_props(dc, fsl_imx6ul_properties);
dc->realize = fsl_imx6ul_realize;
dc->desc = "i.MX6UL SOC";
/* Reason: Uses serial_hds and nd_table in realize() directly */
dc->user_creatable = false;
}
static const TypeInfo fsl_imx6ul_type_info = {
.name = TYPE_FSL_IMX6UL,
.parent = TYPE_DEVICE,
.instance_size = sizeof(FslIMX6ULState),
.instance_init = fsl_imx6ul_init,
.class_init = fsl_imx6ul_class_init,
};
static void fsl_imx6ul_register_types(void)
{
type_register_static(&fsl_imx6ul_type_info);
}
type_init(fsl_imx6ul_register_types)
Reference in New Issue View Git Blame Copy Permalink