mirror of
https://github.com/xemu-project/xemu.git
synced 2024-11-30 15:00:34 +00:00
13d8cc515d
On some image chains, QEMU may not always be able to resolve the filenames properly, when updating the backing file of an image after a block job. For instance, certain relative pathnames may fail, or drives may have been specified originally by file descriptor (e.g. /dev/fd/???), or a relative protocol pathname may have been used. In these instances, QEMU may lack the information to be able to make the correct choice, but the user or management layer most likely does have that knowledge. With this extension to the block-stream api, the user is able to change the backing file of the active layer as part of the block-stream operation. This allows the change to be 'safe', in the sense that if the attempt to write the active image metadata fails, then the block-stream operation returns failure, without disrupting the guest. If a backing file string is not specified in the command, the backing file string to use is determined in the same manner as it was previously. Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Jeff Cody <jcody@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2669 lines
77 KiB
C
2669 lines
77 KiB
C
/*
|
|
* QEMU host block devices
|
|
*
|
|
* Copyright (c) 2003-2008 Fabrice Bellard
|
|
*
|
|
* This work is licensed under the terms of the GNU GPL, version 2 or
|
|
* later. See the COPYING file in the top-level directory.
|
|
*
|
|
* This file incorporates work covered by the following copyright and
|
|
* permission notice:
|
|
*
|
|
* Copyright (c) 2003-2008 Fabrice Bellard
|
|
*
|
|
* Permission is hereby granted, free of charge, to any person obtaining a copy
|
|
* of this software and associated documentation files (the "Software"), to deal
|
|
* in the Software without restriction, including without limitation the rights
|
|
* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
|
|
* copies of the Software, and to permit persons to whom the Software is
|
|
* furnished to do so, subject to the following conditions:
|
|
*
|
|
* The above copyright notice and this permission notice shall be included in
|
|
* all copies or substantial portions of the Software.
|
|
*
|
|
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
|
|
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
|
|
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
|
|
* THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
|
|
* LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
|
|
* OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
|
|
* THE SOFTWARE.
|
|
*/
|
|
|
|
#include "sysemu/blockdev.h"
|
|
#include "hw/block/block.h"
|
|
#include "block/blockjob.h"
|
|
#include "monitor/monitor.h"
|
|
#include "qemu/option.h"
|
|
#include "qemu/config-file.h"
|
|
#include "qapi/qmp/types.h"
|
|
#include "qapi-visit.h"
|
|
#include "qapi/qmp-output-visitor.h"
|
|
#include "sysemu/sysemu.h"
|
|
#include "block/block_int.h"
|
|
#include "qmp-commands.h"
|
|
#include "trace.h"
|
|
#include "sysemu/arch_init.h"
|
|
|
|
static QTAILQ_HEAD(drivelist, DriveInfo) drives = QTAILQ_HEAD_INITIALIZER(drives);
|
|
|
|
static const char *const if_name[IF_COUNT] = {
|
|
[IF_NONE] = "none",
|
|
[IF_IDE] = "ide",
|
|
[IF_SCSI] = "scsi",
|
|
[IF_FLOPPY] = "floppy",
|
|
[IF_PFLASH] = "pflash",
|
|
[IF_MTD] = "mtd",
|
|
[IF_SD] = "sd",
|
|
[IF_VIRTIO] = "virtio",
|
|
[IF_XEN] = "xen",
|
|
};
|
|
|
|
static const int if_max_devs[IF_COUNT] = {
|
|
/*
|
|
* Do not change these numbers! They govern how drive option
|
|
* index maps to unit and bus. That mapping is ABI.
|
|
*
|
|
* All controllers used to imlement if=T drives need to support
|
|
* if_max_devs[T] units, for any T with if_max_devs[T] != 0.
|
|
* Otherwise, some index values map to "impossible" bus, unit
|
|
* values.
|
|
*
|
|
* For instance, if you change [IF_SCSI] to 255, -drive
|
|
* if=scsi,index=12 no longer means bus=1,unit=5, but
|
|
* bus=0,unit=12. With an lsi53c895a controller (7 units max),
|
|
* the drive can't be set up. Regression.
|
|
*/
|
|
[IF_IDE] = 2,
|
|
[IF_SCSI] = 7,
|
|
};
|
|
|
|
/*
|
|
* We automatically delete the drive when a device using it gets
|
|
* unplugged. Questionable feature, but we can't just drop it.
|
|
* Device models call blockdev_mark_auto_del() to schedule the
|
|
* automatic deletion, and generic qdev code calls blockdev_auto_del()
|
|
* when deletion is actually safe.
|
|
*/
|
|
void blockdev_mark_auto_del(BlockDriverState *bs)
|
|
{
|
|
DriveInfo *dinfo = drive_get_by_blockdev(bs);
|
|
|
|
if (dinfo && !dinfo->enable_auto_del) {
|
|
return;
|
|
}
|
|
|
|
if (bs->job) {
|
|
block_job_cancel(bs->job);
|
|
}
|
|
if (dinfo) {
|
|
dinfo->auto_del = 1;
|
|
}
|
|
}
|
|
|
|
void blockdev_auto_del(BlockDriverState *bs)
|
|
{
|
|
DriveInfo *dinfo = drive_get_by_blockdev(bs);
|
|
|
|
if (dinfo && dinfo->auto_del) {
|
|
drive_del(dinfo);
|
|
}
|
|
}
|
|
|
|
static int drive_index_to_bus_id(BlockInterfaceType type, int index)
|
|
{
|
|
int max_devs = if_max_devs[type];
|
|
return max_devs ? index / max_devs : 0;
|
|
}
|
|
|
|
static int drive_index_to_unit_id(BlockInterfaceType type, int index)
|
|
{
|
|
int max_devs = if_max_devs[type];
|
|
return max_devs ? index % max_devs : index;
|
|
}
|
|
|
|
QemuOpts *drive_def(const char *optstr)
|
|
{
|
|
return qemu_opts_parse(qemu_find_opts("drive"), optstr, 0);
|
|
}
|
|
|
|
QemuOpts *drive_add(BlockInterfaceType type, int index, const char *file,
|
|
const char *optstr)
|
|
{
|
|
QemuOpts *opts;
|
|
char buf[32];
|
|
|
|
opts = drive_def(optstr);
|
|
if (!opts) {
|
|
return NULL;
|
|
}
|
|
if (type != IF_DEFAULT) {
|
|
qemu_opt_set(opts, "if", if_name[type]);
|
|
}
|
|
if (index >= 0) {
|
|
snprintf(buf, sizeof(buf), "%d", index);
|
|
qemu_opt_set(opts, "index", buf);
|
|
}
|
|
if (file)
|
|
qemu_opt_set(opts, "file", file);
|
|
return opts;
|
|
}
|
|
|
|
DriveInfo *drive_get(BlockInterfaceType type, int bus, int unit)
|
|
{
|
|
DriveInfo *dinfo;
|
|
|
|
/* seek interface, bus and unit */
|
|
|
|
QTAILQ_FOREACH(dinfo, &drives, next) {
|
|
if (dinfo->type == type &&
|
|
dinfo->bus == bus &&
|
|
dinfo->unit == unit)
|
|
return dinfo;
|
|
}
|
|
|
|
return NULL;
|
|
}
|
|
|
|
DriveInfo *drive_get_by_index(BlockInterfaceType type, int index)
|
|
{
|
|
return drive_get(type,
|
|
drive_index_to_bus_id(type, index),
|
|
drive_index_to_unit_id(type, index));
|
|
}
|
|
|
|
int drive_get_max_bus(BlockInterfaceType type)
|
|
{
|
|
int max_bus;
|
|
DriveInfo *dinfo;
|
|
|
|
max_bus = -1;
|
|
QTAILQ_FOREACH(dinfo, &drives, next) {
|
|
if(dinfo->type == type &&
|
|
dinfo->bus > max_bus)
|
|
max_bus = dinfo->bus;
|
|
}
|
|
return max_bus;
|
|
}
|
|
|
|
/* Get a block device. This should only be used for single-drive devices
|
|
(e.g. SD/Floppy/MTD). Multi-disk devices (scsi/ide) should use the
|
|
appropriate bus. */
|
|
DriveInfo *drive_get_next(BlockInterfaceType type)
|
|
{
|
|
static int next_block_unit[IF_COUNT];
|
|
|
|
return drive_get(type, 0, next_block_unit[type]++);
|
|
}
|
|
|
|
DriveInfo *drive_get_by_blockdev(BlockDriverState *bs)
|
|
{
|
|
DriveInfo *dinfo;
|
|
|
|
QTAILQ_FOREACH(dinfo, &drives, next) {
|
|
if (dinfo->bdrv == bs) {
|
|
return dinfo;
|
|
}
|
|
}
|
|
return NULL;
|
|
}
|
|
|
|
static void bdrv_format_print(void *opaque, const char *name)
|
|
{
|
|
error_printf(" %s", name);
|
|
}
|
|
|
|
void drive_del(DriveInfo *dinfo)
|
|
{
|
|
if (dinfo->opts) {
|
|
qemu_opts_del(dinfo->opts);
|
|
}
|
|
|
|
bdrv_unref(dinfo->bdrv);
|
|
g_free(dinfo->id);
|
|
QTAILQ_REMOVE(&drives, dinfo, next);
|
|
g_free(dinfo->serial);
|
|
g_free(dinfo);
|
|
}
|
|
|
|
typedef struct {
|
|
QEMUBH *bh;
|
|
BlockDriverState *bs;
|
|
} BDRVPutRefBH;
|
|
|
|
static void bdrv_put_ref_bh(void *opaque)
|
|
{
|
|
BDRVPutRefBH *s = opaque;
|
|
|
|
bdrv_unref(s->bs);
|
|
qemu_bh_delete(s->bh);
|
|
g_free(s);
|
|
}
|
|
|
|
/*
|
|
* Release a BDS reference in a BH
|
|
*
|
|
* It is not safe to use bdrv_unref() from a callback function when the callers
|
|
* still need the BlockDriverState. In such cases we schedule a BH to release
|
|
* the reference.
|
|
*/
|
|
static void bdrv_put_ref_bh_schedule(BlockDriverState *bs)
|
|
{
|
|
BDRVPutRefBH *s;
|
|
|
|
s = g_new(BDRVPutRefBH, 1);
|
|
s->bh = qemu_bh_new(bdrv_put_ref_bh, s);
|
|
s->bs = bs;
|
|
qemu_bh_schedule(s->bh);
|
|
}
|
|
|
|
static int parse_block_error_action(const char *buf, bool is_read, Error **errp)
|
|
{
|
|
if (!strcmp(buf, "ignore")) {
|
|
return BLOCKDEV_ON_ERROR_IGNORE;
|
|
} else if (!is_read && !strcmp(buf, "enospc")) {
|
|
return BLOCKDEV_ON_ERROR_ENOSPC;
|
|
} else if (!strcmp(buf, "stop")) {
|
|
return BLOCKDEV_ON_ERROR_STOP;
|
|
} else if (!strcmp(buf, "report")) {
|
|
return BLOCKDEV_ON_ERROR_REPORT;
|
|
} else {
|
|
error_setg(errp, "'%s' invalid %s error action",
|
|
buf, is_read ? "read" : "write");
|
|
return -1;
|
|
}
|
|
}
|
|
|
|
static inline int parse_enum_option(const char *lookup[], const char *buf,
|
|
int max, int def, Error **errp)
|
|
{
|
|
int i;
|
|
|
|
if (!buf) {
|
|
return def;
|
|
}
|
|
|
|
for (i = 0; i < max; i++) {
|
|
if (!strcmp(buf, lookup[i])) {
|
|
return i;
|
|
}
|
|
}
|
|
|
|
error_setg(errp, "invalid parameter value: %s", buf);
|
|
return def;
|
|
}
|
|
|
|
static bool check_throttle_config(ThrottleConfig *cfg, Error **errp)
|
|
{
|
|
if (throttle_conflicting(cfg)) {
|
|
error_setg(errp, "bps/iops/max total values and read/write values"
|
|
" cannot be used at the same time");
|
|
return false;
|
|
}
|
|
|
|
if (!throttle_is_valid(cfg)) {
|
|
error_setg(errp, "bps/iops/maxs values must be 0 or greater");
|
|
return false;
|
|
}
|
|
|
|
return true;
|
|
}
|
|
|
|
typedef enum { MEDIA_DISK, MEDIA_CDROM } DriveMediaType;
|
|
|
|
/* Takes the ownership of bs_opts */
|
|
static DriveInfo *blockdev_init(const char *file, QDict *bs_opts,
|
|
Error **errp)
|
|
{
|
|
const char *buf;
|
|
int ro = 0;
|
|
int bdrv_flags = 0;
|
|
int on_read_error, on_write_error;
|
|
DriveInfo *dinfo;
|
|
ThrottleConfig cfg;
|
|
int snapshot = 0;
|
|
bool copy_on_read;
|
|
int ret;
|
|
Error *error = NULL;
|
|
QemuOpts *opts;
|
|
const char *id;
|
|
bool has_driver_specific_opts;
|
|
BlockdevDetectZeroesOptions detect_zeroes;
|
|
BlockDriver *drv = NULL;
|
|
|
|
/* Check common options by copying from bs_opts to opts, all other options
|
|
* stay in bs_opts for processing by bdrv_open(). */
|
|
id = qdict_get_try_str(bs_opts, "id");
|
|
opts = qemu_opts_create(&qemu_common_drive_opts, id, 1, &error);
|
|
if (error) {
|
|
error_propagate(errp, error);
|
|
goto err_no_opts;
|
|
}
|
|
|
|
qemu_opts_absorb_qdict(opts, bs_opts, &error);
|
|
if (error) {
|
|
error_propagate(errp, error);
|
|
goto early_err;
|
|
}
|
|
|
|
if (id) {
|
|
qdict_del(bs_opts, "id");
|
|
}
|
|
|
|
has_driver_specific_opts = !!qdict_size(bs_opts);
|
|
|
|
/* extract parameters */
|
|
snapshot = qemu_opt_get_bool(opts, "snapshot", 0);
|
|
ro = qemu_opt_get_bool(opts, "read-only", 0);
|
|
copy_on_read = qemu_opt_get_bool(opts, "copy-on-read", false);
|
|
|
|
if ((buf = qemu_opt_get(opts, "discard")) != NULL) {
|
|
if (bdrv_parse_discard_flags(buf, &bdrv_flags) != 0) {
|
|
error_setg(errp, "invalid discard option");
|
|
goto early_err;
|
|
}
|
|
}
|
|
|
|
if (qemu_opt_get_bool(opts, "cache.writeback", true)) {
|
|
bdrv_flags |= BDRV_O_CACHE_WB;
|
|
}
|
|
if (qemu_opt_get_bool(opts, "cache.direct", false)) {
|
|
bdrv_flags |= BDRV_O_NOCACHE;
|
|
}
|
|
if (qemu_opt_get_bool(opts, "cache.no-flush", false)) {
|
|
bdrv_flags |= BDRV_O_NO_FLUSH;
|
|
}
|
|
|
|
#ifdef CONFIG_LINUX_AIO
|
|
if ((buf = qemu_opt_get(opts, "aio")) != NULL) {
|
|
if (!strcmp(buf, "native")) {
|
|
bdrv_flags |= BDRV_O_NATIVE_AIO;
|
|
} else if (!strcmp(buf, "threads")) {
|
|
/* this is the default */
|
|
} else {
|
|
error_setg(errp, "invalid aio option");
|
|
goto early_err;
|
|
}
|
|
}
|
|
#endif
|
|
|
|
if ((buf = qemu_opt_get(opts, "format")) != NULL) {
|
|
if (is_help_option(buf)) {
|
|
error_printf("Supported formats:");
|
|
bdrv_iterate_format(bdrv_format_print, NULL);
|
|
error_printf("\n");
|
|
goto early_err;
|
|
}
|
|
|
|
drv = bdrv_find_format(buf);
|
|
if (!drv) {
|
|
error_setg(errp, "'%s' invalid format", buf);
|
|
goto early_err;
|
|
}
|
|
}
|
|
|
|
/* disk I/O throttling */
|
|
memset(&cfg, 0, sizeof(cfg));
|
|
cfg.buckets[THROTTLE_BPS_TOTAL].avg =
|
|
qemu_opt_get_number(opts, "throttling.bps-total", 0);
|
|
cfg.buckets[THROTTLE_BPS_READ].avg =
|
|
qemu_opt_get_number(opts, "throttling.bps-read", 0);
|
|
cfg.buckets[THROTTLE_BPS_WRITE].avg =
|
|
qemu_opt_get_number(opts, "throttling.bps-write", 0);
|
|
cfg.buckets[THROTTLE_OPS_TOTAL].avg =
|
|
qemu_opt_get_number(opts, "throttling.iops-total", 0);
|
|
cfg.buckets[THROTTLE_OPS_READ].avg =
|
|
qemu_opt_get_number(opts, "throttling.iops-read", 0);
|
|
cfg.buckets[THROTTLE_OPS_WRITE].avg =
|
|
qemu_opt_get_number(opts, "throttling.iops-write", 0);
|
|
|
|
cfg.buckets[THROTTLE_BPS_TOTAL].max =
|
|
qemu_opt_get_number(opts, "throttling.bps-total-max", 0);
|
|
cfg.buckets[THROTTLE_BPS_READ].max =
|
|
qemu_opt_get_number(opts, "throttling.bps-read-max", 0);
|
|
cfg.buckets[THROTTLE_BPS_WRITE].max =
|
|
qemu_opt_get_number(opts, "throttling.bps-write-max", 0);
|
|
cfg.buckets[THROTTLE_OPS_TOTAL].max =
|
|
qemu_opt_get_number(opts, "throttling.iops-total-max", 0);
|
|
cfg.buckets[THROTTLE_OPS_READ].max =
|
|
qemu_opt_get_number(opts, "throttling.iops-read-max", 0);
|
|
cfg.buckets[THROTTLE_OPS_WRITE].max =
|
|
qemu_opt_get_number(opts, "throttling.iops-write-max", 0);
|
|
|
|
cfg.op_size = qemu_opt_get_number(opts, "throttling.iops-size", 0);
|
|
|
|
if (!check_throttle_config(&cfg, &error)) {
|
|
error_propagate(errp, error);
|
|
goto early_err;
|
|
}
|
|
|
|
on_write_error = BLOCKDEV_ON_ERROR_ENOSPC;
|
|
if ((buf = qemu_opt_get(opts, "werror")) != NULL) {
|
|
on_write_error = parse_block_error_action(buf, 0, &error);
|
|
if (error) {
|
|
error_propagate(errp, error);
|
|
goto early_err;
|
|
}
|
|
}
|
|
|
|
on_read_error = BLOCKDEV_ON_ERROR_REPORT;
|
|
if ((buf = qemu_opt_get(opts, "rerror")) != NULL) {
|
|
on_read_error = parse_block_error_action(buf, 1, &error);
|
|
if (error) {
|
|
error_propagate(errp, error);
|
|
goto early_err;
|
|
}
|
|
}
|
|
|
|
detect_zeroes =
|
|
parse_enum_option(BlockdevDetectZeroesOptions_lookup,
|
|
qemu_opt_get(opts, "detect-zeroes"),
|
|
BLOCKDEV_DETECT_ZEROES_OPTIONS_MAX,
|
|
BLOCKDEV_DETECT_ZEROES_OPTIONS_OFF,
|
|
&error);
|
|
if (error) {
|
|
error_propagate(errp, error);
|
|
goto early_err;
|
|
}
|
|
|
|
if (detect_zeroes == BLOCKDEV_DETECT_ZEROES_OPTIONS_UNMAP &&
|
|
!(bdrv_flags & BDRV_O_UNMAP)) {
|
|
error_setg(errp, "setting detect-zeroes to unmap is not allowed "
|
|
"without setting discard operation to unmap");
|
|
goto early_err;
|
|
}
|
|
|
|
/* init */
|
|
dinfo = g_malloc0(sizeof(*dinfo));
|
|
dinfo->id = g_strdup(qemu_opts_id(opts));
|
|
dinfo->bdrv = bdrv_new(dinfo->id, &error);
|
|
if (error) {
|
|
error_propagate(errp, error);
|
|
goto bdrv_new_err;
|
|
}
|
|
dinfo->bdrv->open_flags = snapshot ? BDRV_O_SNAPSHOT : 0;
|
|
dinfo->bdrv->read_only = ro;
|
|
dinfo->bdrv->detect_zeroes = detect_zeroes;
|
|
QTAILQ_INSERT_TAIL(&drives, dinfo, next);
|
|
|
|
bdrv_set_on_error(dinfo->bdrv, on_read_error, on_write_error);
|
|
|
|
/* disk I/O throttling */
|
|
if (throttle_enabled(&cfg)) {
|
|
bdrv_io_limits_enable(dinfo->bdrv);
|
|
bdrv_set_io_limits(dinfo->bdrv, &cfg);
|
|
}
|
|
|
|
if (!file || !*file) {
|
|
if (has_driver_specific_opts) {
|
|
file = NULL;
|
|
} else {
|
|
QDECREF(bs_opts);
|
|
qemu_opts_del(opts);
|
|
return dinfo;
|
|
}
|
|
}
|
|
if (snapshot) {
|
|
/* always use cache=unsafe with snapshot */
|
|
bdrv_flags &= ~BDRV_O_CACHE_MASK;
|
|
bdrv_flags |= (BDRV_O_SNAPSHOT|BDRV_O_CACHE_WB|BDRV_O_NO_FLUSH);
|
|
}
|
|
|
|
if (copy_on_read) {
|
|
bdrv_flags |= BDRV_O_COPY_ON_READ;
|
|
}
|
|
|
|
if (runstate_check(RUN_STATE_INMIGRATE)) {
|
|
bdrv_flags |= BDRV_O_INCOMING;
|
|
}
|
|
|
|
bdrv_flags |= ro ? 0 : BDRV_O_RDWR;
|
|
|
|
QINCREF(bs_opts);
|
|
ret = bdrv_open(&dinfo->bdrv, file, NULL, bs_opts, bdrv_flags, drv, &error);
|
|
|
|
if (ret < 0) {
|
|
error_setg(errp, "could not open disk image %s: %s",
|
|
file ?: dinfo->id, error_get_pretty(error));
|
|
error_free(error);
|
|
goto err;
|
|
}
|
|
|
|
if (bdrv_key_required(dinfo->bdrv))
|
|
autostart = 0;
|
|
|
|
QDECREF(bs_opts);
|
|
qemu_opts_del(opts);
|
|
|
|
return dinfo;
|
|
|
|
err:
|
|
bdrv_unref(dinfo->bdrv);
|
|
QTAILQ_REMOVE(&drives, dinfo, next);
|
|
bdrv_new_err:
|
|
g_free(dinfo->id);
|
|
g_free(dinfo);
|
|
early_err:
|
|
qemu_opts_del(opts);
|
|
err_no_opts:
|
|
QDECREF(bs_opts);
|
|
return NULL;
|
|
}
|
|
|
|
static void qemu_opt_rename(QemuOpts *opts, const char *from, const char *to)
|
|
{
|
|
const char *value;
|
|
|
|
value = qemu_opt_get(opts, from);
|
|
if (value) {
|
|
qemu_opt_set(opts, to, value);
|
|
qemu_opt_unset(opts, from);
|
|
}
|
|
}
|
|
|
|
QemuOptsList qemu_legacy_drive_opts = {
|
|
.name = "drive",
|
|
.head = QTAILQ_HEAD_INITIALIZER(qemu_legacy_drive_opts.head),
|
|
.desc = {
|
|
{
|
|
.name = "bus",
|
|
.type = QEMU_OPT_NUMBER,
|
|
.help = "bus number",
|
|
},{
|
|
.name = "unit",
|
|
.type = QEMU_OPT_NUMBER,
|
|
.help = "unit number (i.e. lun for scsi)",
|
|
},{
|
|
.name = "index",
|
|
.type = QEMU_OPT_NUMBER,
|
|
.help = "index number",
|
|
},{
|
|
.name = "media",
|
|
.type = QEMU_OPT_STRING,
|
|
.help = "media type (disk, cdrom)",
|
|
},{
|
|
.name = "if",
|
|
.type = QEMU_OPT_STRING,
|
|
.help = "interface (ide, scsi, sd, mtd, floppy, pflash, virtio)",
|
|
},{
|
|
.name = "cyls",
|
|
.type = QEMU_OPT_NUMBER,
|
|
.help = "number of cylinders (ide disk geometry)",
|
|
},{
|
|
.name = "heads",
|
|
.type = QEMU_OPT_NUMBER,
|
|
.help = "number of heads (ide disk geometry)",
|
|
},{
|
|
.name = "secs",
|
|
.type = QEMU_OPT_NUMBER,
|
|
.help = "number of sectors (ide disk geometry)",
|
|
},{
|
|
.name = "trans",
|
|
.type = QEMU_OPT_STRING,
|
|
.help = "chs translation (auto, lba, none)",
|
|
},{
|
|
.name = "boot",
|
|
.type = QEMU_OPT_BOOL,
|
|
.help = "(deprecated, ignored)",
|
|
},{
|
|
.name = "addr",
|
|
.type = QEMU_OPT_STRING,
|
|
.help = "pci address (virtio only)",
|
|
},{
|
|
.name = "serial",
|
|
.type = QEMU_OPT_STRING,
|
|
.help = "disk serial number",
|
|
},{
|
|
.name = "file",
|
|
.type = QEMU_OPT_STRING,
|
|
.help = "file name",
|
|
},
|
|
|
|
/* Options that are passed on, but have special semantics with -drive */
|
|
{
|
|
.name = "read-only",
|
|
.type = QEMU_OPT_BOOL,
|
|
.help = "open drive file as read-only",
|
|
},{
|
|
.name = "rerror",
|
|
.type = QEMU_OPT_STRING,
|
|
.help = "read error action",
|
|
},{
|
|
.name = "werror",
|
|
.type = QEMU_OPT_STRING,
|
|
.help = "write error action",
|
|
},{
|
|
.name = "copy-on-read",
|
|
.type = QEMU_OPT_BOOL,
|
|
.help = "copy read data from backing file into image file",
|
|
},
|
|
|
|
{ /* end of list */ }
|
|
},
|
|
};
|
|
|
|
DriveInfo *drive_new(QemuOpts *all_opts, BlockInterfaceType block_default_type)
|
|
{
|
|
const char *value;
|
|
DriveInfo *dinfo = NULL;
|
|
QDict *bs_opts;
|
|
QemuOpts *legacy_opts;
|
|
DriveMediaType media = MEDIA_DISK;
|
|
BlockInterfaceType type;
|
|
int cyls, heads, secs, translation;
|
|
int max_devs, bus_id, unit_id, index;
|
|
const char *devaddr;
|
|
const char *werror, *rerror;
|
|
bool read_only = false;
|
|
bool copy_on_read;
|
|
const char *serial;
|
|
const char *filename;
|
|
Error *local_err = NULL;
|
|
|
|
/* Change legacy command line options into QMP ones */
|
|
qemu_opt_rename(all_opts, "iops", "throttling.iops-total");
|
|
qemu_opt_rename(all_opts, "iops_rd", "throttling.iops-read");
|
|
qemu_opt_rename(all_opts, "iops_wr", "throttling.iops-write");
|
|
|
|
qemu_opt_rename(all_opts, "bps", "throttling.bps-total");
|
|
qemu_opt_rename(all_opts, "bps_rd", "throttling.bps-read");
|
|
qemu_opt_rename(all_opts, "bps_wr", "throttling.bps-write");
|
|
|
|
qemu_opt_rename(all_opts, "iops_max", "throttling.iops-total-max");
|
|
qemu_opt_rename(all_opts, "iops_rd_max", "throttling.iops-read-max");
|
|
qemu_opt_rename(all_opts, "iops_wr_max", "throttling.iops-write-max");
|
|
|
|
qemu_opt_rename(all_opts, "bps_max", "throttling.bps-total-max");
|
|
qemu_opt_rename(all_opts, "bps_rd_max", "throttling.bps-read-max");
|
|
qemu_opt_rename(all_opts, "bps_wr_max", "throttling.bps-write-max");
|
|
|
|
qemu_opt_rename(all_opts,
|
|
"iops_size", "throttling.iops-size");
|
|
|
|
qemu_opt_rename(all_opts, "readonly", "read-only");
|
|
|
|
value = qemu_opt_get(all_opts, "cache");
|
|
if (value) {
|
|
int flags = 0;
|
|
|
|
if (bdrv_parse_cache_flags(value, &flags) != 0) {
|
|
error_report("invalid cache option");
|
|
return NULL;
|
|
}
|
|
|
|
/* Specific options take precedence */
|
|
if (!qemu_opt_get(all_opts, "cache.writeback")) {
|
|
qemu_opt_set_bool(all_opts, "cache.writeback",
|
|
!!(flags & BDRV_O_CACHE_WB));
|
|
}
|
|
if (!qemu_opt_get(all_opts, "cache.direct")) {
|
|
qemu_opt_set_bool(all_opts, "cache.direct",
|
|
!!(flags & BDRV_O_NOCACHE));
|
|
}
|
|
if (!qemu_opt_get(all_opts, "cache.no-flush")) {
|
|
qemu_opt_set_bool(all_opts, "cache.no-flush",
|
|
!!(flags & BDRV_O_NO_FLUSH));
|
|
}
|
|
qemu_opt_unset(all_opts, "cache");
|
|
}
|
|
|
|
/* Get a QDict for processing the options */
|
|
bs_opts = qdict_new();
|
|
qemu_opts_to_qdict(all_opts, bs_opts);
|
|
|
|
legacy_opts = qemu_opts_create(&qemu_legacy_drive_opts, NULL, 0,
|
|
&error_abort);
|
|
qemu_opts_absorb_qdict(legacy_opts, bs_opts, &local_err);
|
|
if (local_err) {
|
|
error_report("%s", error_get_pretty(local_err));
|
|
error_free(local_err);
|
|
goto fail;
|
|
}
|
|
|
|
/* Deprecated option boot=[on|off] */
|
|
if (qemu_opt_get(legacy_opts, "boot") != NULL) {
|
|
fprintf(stderr, "qemu-kvm: boot=on|off is deprecated and will be "
|
|
"ignored. Future versions will reject this parameter. Please "
|
|
"update your scripts.\n");
|
|
}
|
|
|
|
/* Media type */
|
|
value = qemu_opt_get(legacy_opts, "media");
|
|
if (value) {
|
|
if (!strcmp(value, "disk")) {
|
|
media = MEDIA_DISK;
|
|
} else if (!strcmp(value, "cdrom")) {
|
|
media = MEDIA_CDROM;
|
|
read_only = true;
|
|
} else {
|
|
error_report("'%s' invalid media", value);
|
|
goto fail;
|
|
}
|
|
}
|
|
|
|
/* copy-on-read is disabled with a warning for read-only devices */
|
|
read_only |= qemu_opt_get_bool(legacy_opts, "read-only", false);
|
|
copy_on_read = qemu_opt_get_bool(legacy_opts, "copy-on-read", false);
|
|
|
|
if (read_only && copy_on_read) {
|
|
error_report("warning: disabling copy-on-read on read-only drive");
|
|
copy_on_read = false;
|
|
}
|
|
|
|
qdict_put(bs_opts, "read-only",
|
|
qstring_from_str(read_only ? "on" : "off"));
|
|
qdict_put(bs_opts, "copy-on-read",
|
|
qstring_from_str(copy_on_read ? "on" :"off"));
|
|
|
|
/* Controller type */
|
|
value = qemu_opt_get(legacy_opts, "if");
|
|
if (value) {
|
|
for (type = 0;
|
|
type < IF_COUNT && strcmp(value, if_name[type]);
|
|
type++) {
|
|
}
|
|
if (type == IF_COUNT) {
|
|
error_report("unsupported bus type '%s'", value);
|
|
goto fail;
|
|
}
|
|
} else {
|
|
type = block_default_type;
|
|
}
|
|
|
|
/* Geometry */
|
|
cyls = qemu_opt_get_number(legacy_opts, "cyls", 0);
|
|
heads = qemu_opt_get_number(legacy_opts, "heads", 0);
|
|
secs = qemu_opt_get_number(legacy_opts, "secs", 0);
|
|
|
|
if (cyls || heads || secs) {
|
|
if (cyls < 1) {
|
|
error_report("invalid physical cyls number");
|
|
goto fail;
|
|
}
|
|
if (heads < 1) {
|
|
error_report("invalid physical heads number");
|
|
goto fail;
|
|
}
|
|
if (secs < 1) {
|
|
error_report("invalid physical secs number");
|
|
goto fail;
|
|
}
|
|
}
|
|
|
|
translation = BIOS_ATA_TRANSLATION_AUTO;
|
|
value = qemu_opt_get(legacy_opts, "trans");
|
|
if (value != NULL) {
|
|
if (!cyls) {
|
|
error_report("'%s' trans must be used with cyls, heads and secs",
|
|
value);
|
|
goto fail;
|
|
}
|
|
if (!strcmp(value, "none")) {
|
|
translation = BIOS_ATA_TRANSLATION_NONE;
|
|
} else if (!strcmp(value, "lba")) {
|
|
translation = BIOS_ATA_TRANSLATION_LBA;
|
|
} else if (!strcmp(value, "large")) {
|
|
translation = BIOS_ATA_TRANSLATION_LARGE;
|
|
} else if (!strcmp(value, "rechs")) {
|
|
translation = BIOS_ATA_TRANSLATION_RECHS;
|
|
} else if (!strcmp(value, "auto")) {
|
|
translation = BIOS_ATA_TRANSLATION_AUTO;
|
|
} else {
|
|
error_report("'%s' invalid translation type", value);
|
|
goto fail;
|
|
}
|
|
}
|
|
|
|
if (media == MEDIA_CDROM) {
|
|
if (cyls || secs || heads) {
|
|
error_report("CHS can't be set with media=cdrom");
|
|
goto fail;
|
|
}
|
|
}
|
|
|
|
/* Device address specified by bus/unit or index.
|
|
* If none was specified, try to find the first free one. */
|
|
bus_id = qemu_opt_get_number(legacy_opts, "bus", 0);
|
|
unit_id = qemu_opt_get_number(legacy_opts, "unit", -1);
|
|
index = qemu_opt_get_number(legacy_opts, "index", -1);
|
|
|
|
max_devs = if_max_devs[type];
|
|
|
|
if (index != -1) {
|
|
if (bus_id != 0 || unit_id != -1) {
|
|
error_report("index cannot be used with bus and unit");
|
|
goto fail;
|
|
}
|
|
bus_id = drive_index_to_bus_id(type, index);
|
|
unit_id = drive_index_to_unit_id(type, index);
|
|
}
|
|
|
|
if (unit_id == -1) {
|
|
unit_id = 0;
|
|
while (drive_get(type, bus_id, unit_id) != NULL) {
|
|
unit_id++;
|
|
if (max_devs && unit_id >= max_devs) {
|
|
unit_id -= max_devs;
|
|
bus_id++;
|
|
}
|
|
}
|
|
}
|
|
|
|
if (max_devs && unit_id >= max_devs) {
|
|
error_report("unit %d too big (max is %d)", unit_id, max_devs - 1);
|
|
goto fail;
|
|
}
|
|
|
|
if (drive_get(type, bus_id, unit_id) != NULL) {
|
|
error_report("drive with bus=%d, unit=%d (index=%d) exists",
|
|
bus_id, unit_id, index);
|
|
goto fail;
|
|
}
|
|
|
|
/* Serial number */
|
|
serial = qemu_opt_get(legacy_opts, "serial");
|
|
|
|
/* no id supplied -> create one */
|
|
if (qemu_opts_id(all_opts) == NULL) {
|
|
char *new_id;
|
|
const char *mediastr = "";
|
|
if (type == IF_IDE || type == IF_SCSI) {
|
|
mediastr = (media == MEDIA_CDROM) ? "-cd" : "-hd";
|
|
}
|
|
if (max_devs) {
|
|
new_id = g_strdup_printf("%s%i%s%i", if_name[type], bus_id,
|
|
mediastr, unit_id);
|
|
} else {
|
|
new_id = g_strdup_printf("%s%s%i", if_name[type],
|
|
mediastr, unit_id);
|
|
}
|
|
qdict_put(bs_opts, "id", qstring_from_str(new_id));
|
|
g_free(new_id);
|
|
}
|
|
|
|
/* Add virtio block device */
|
|
devaddr = qemu_opt_get(legacy_opts, "addr");
|
|
if (devaddr && type != IF_VIRTIO) {
|
|
error_report("addr is not supported by this bus type");
|
|
goto fail;
|
|
}
|
|
|
|
if (type == IF_VIRTIO) {
|
|
QemuOpts *devopts;
|
|
devopts = qemu_opts_create(qemu_find_opts("device"), NULL, 0,
|
|
&error_abort);
|
|
if (arch_type == QEMU_ARCH_S390X) {
|
|
qemu_opt_set(devopts, "driver", "virtio-blk-s390");
|
|
} else {
|
|
qemu_opt_set(devopts, "driver", "virtio-blk-pci");
|
|
}
|
|
qemu_opt_set(devopts, "drive", qdict_get_str(bs_opts, "id"));
|
|
if (devaddr) {
|
|
qemu_opt_set(devopts, "addr", devaddr);
|
|
}
|
|
}
|
|
|
|
filename = qemu_opt_get(legacy_opts, "file");
|
|
|
|
/* Check werror/rerror compatibility with if=... */
|
|
werror = qemu_opt_get(legacy_opts, "werror");
|
|
if (werror != NULL) {
|
|
if (type != IF_IDE && type != IF_SCSI && type != IF_VIRTIO &&
|
|
type != IF_NONE) {
|
|
error_report("werror is not supported by this bus type");
|
|
goto fail;
|
|
}
|
|
qdict_put(bs_opts, "werror", qstring_from_str(werror));
|
|
}
|
|
|
|
rerror = qemu_opt_get(legacy_opts, "rerror");
|
|
if (rerror != NULL) {
|
|
if (type != IF_IDE && type != IF_VIRTIO && type != IF_SCSI &&
|
|
type != IF_NONE) {
|
|
error_report("rerror is not supported by this bus type");
|
|
goto fail;
|
|
}
|
|
qdict_put(bs_opts, "rerror", qstring_from_str(rerror));
|
|
}
|
|
|
|
/* Actual block device init: Functionality shared with blockdev-add */
|
|
dinfo = blockdev_init(filename, bs_opts, &local_err);
|
|
bs_opts = NULL;
|
|
if (dinfo == NULL) {
|
|
if (local_err) {
|
|
error_report("%s", error_get_pretty(local_err));
|
|
error_free(local_err);
|
|
}
|
|
goto fail;
|
|
} else {
|
|
assert(!local_err);
|
|
}
|
|
|
|
/* Set legacy DriveInfo fields */
|
|
dinfo->enable_auto_del = true;
|
|
dinfo->opts = all_opts;
|
|
|
|
dinfo->cyls = cyls;
|
|
dinfo->heads = heads;
|
|
dinfo->secs = secs;
|
|
dinfo->trans = translation;
|
|
|
|
dinfo->type = type;
|
|
dinfo->bus = bus_id;
|
|
dinfo->unit = unit_id;
|
|
dinfo->devaddr = devaddr;
|
|
|
|
dinfo->serial = g_strdup(serial);
|
|
|
|
switch(type) {
|
|
case IF_IDE:
|
|
case IF_SCSI:
|
|
case IF_XEN:
|
|
case IF_NONE:
|
|
dinfo->media_cd = media == MEDIA_CDROM;
|
|
break;
|
|
default:
|
|
break;
|
|
}
|
|
|
|
fail:
|
|
qemu_opts_del(legacy_opts);
|
|
QDECREF(bs_opts);
|
|
return dinfo;
|
|
}
|
|
|
|
void do_commit(Monitor *mon, const QDict *qdict)
|
|
{
|
|
const char *device = qdict_get_str(qdict, "device");
|
|
BlockDriverState *bs;
|
|
int ret;
|
|
|
|
if (!strcmp(device, "all")) {
|
|
ret = bdrv_commit_all();
|
|
} else {
|
|
bs = bdrv_find(device);
|
|
if (!bs) {
|
|
monitor_printf(mon, "Device '%s' not found\n", device);
|
|
return;
|
|
}
|
|
ret = bdrv_commit(bs);
|
|
}
|
|
if (ret < 0) {
|
|
monitor_printf(mon, "'commit' error for '%s': %s\n", device,
|
|
strerror(-ret));
|
|
}
|
|
}
|
|
|
|
static void blockdev_do_action(int kind, void *data, Error **errp)
|
|
{
|
|
TransactionAction action;
|
|
TransactionActionList list;
|
|
|
|
action.kind = kind;
|
|
action.data = data;
|
|
list.value = &action;
|
|
list.next = NULL;
|
|
qmp_transaction(&list, errp);
|
|
}
|
|
|
|
void qmp_blockdev_snapshot_sync(bool has_device, const char *device,
|
|
bool has_node_name, const char *node_name,
|
|
const char *snapshot_file,
|
|
bool has_snapshot_node_name,
|
|
const char *snapshot_node_name,
|
|
bool has_format, const char *format,
|
|
bool has_mode, NewImageMode mode, Error **errp)
|
|
{
|
|
BlockdevSnapshot snapshot = {
|
|
.has_device = has_device,
|
|
.device = (char *) device,
|
|
.has_node_name = has_node_name,
|
|
.node_name = (char *) node_name,
|
|
.snapshot_file = (char *) snapshot_file,
|
|
.has_snapshot_node_name = has_snapshot_node_name,
|
|
.snapshot_node_name = (char *) snapshot_node_name,
|
|
.has_format = has_format,
|
|
.format = (char *) format,
|
|
.has_mode = has_mode,
|
|
.mode = mode,
|
|
};
|
|
blockdev_do_action(TRANSACTION_ACTION_KIND_BLOCKDEV_SNAPSHOT_SYNC,
|
|
&snapshot, errp);
|
|
}
|
|
|
|
void qmp_blockdev_snapshot_internal_sync(const char *device,
|
|
const char *name,
|
|
Error **errp)
|
|
{
|
|
BlockdevSnapshotInternal snapshot = {
|
|
.device = (char *) device,
|
|
.name = (char *) name
|
|
};
|
|
|
|
blockdev_do_action(TRANSACTION_ACTION_KIND_BLOCKDEV_SNAPSHOT_INTERNAL_SYNC,
|
|
&snapshot, errp);
|
|
}
|
|
|
|
SnapshotInfo *qmp_blockdev_snapshot_delete_internal_sync(const char *device,
|
|
bool has_id,
|
|
const char *id,
|
|
bool has_name,
|
|
const char *name,
|
|
Error **errp)
|
|
{
|
|
BlockDriverState *bs = bdrv_find(device);
|
|
QEMUSnapshotInfo sn;
|
|
Error *local_err = NULL;
|
|
SnapshotInfo *info = NULL;
|
|
int ret;
|
|
|
|
if (!bs) {
|
|
error_set(errp, QERR_DEVICE_NOT_FOUND, device);
|
|
return NULL;
|
|
}
|
|
|
|
if (!has_id) {
|
|
id = NULL;
|
|
}
|
|
|
|
if (!has_name) {
|
|
name = NULL;
|
|
}
|
|
|
|
if (!id && !name) {
|
|
error_setg(errp, "Name or id must be provided");
|
|
return NULL;
|
|
}
|
|
|
|
ret = bdrv_snapshot_find_by_id_and_name(bs, id, name, &sn, &local_err);
|
|
if (local_err) {
|
|
error_propagate(errp, local_err);
|
|
return NULL;
|
|
}
|
|
if (!ret) {
|
|
error_setg(errp,
|
|
"Snapshot with id '%s' and name '%s' does not exist on "
|
|
"device '%s'",
|
|
STR_OR_NULL(id), STR_OR_NULL(name), device);
|
|
return NULL;
|
|
}
|
|
|
|
bdrv_snapshot_delete(bs, id, name, &local_err);
|
|
if (local_err) {
|
|
error_propagate(errp, local_err);
|
|
return NULL;
|
|
}
|
|
|
|
info = g_malloc0(sizeof(SnapshotInfo));
|
|
info->id = g_strdup(sn.id_str);
|
|
info->name = g_strdup(sn.name);
|
|
info->date_nsec = sn.date_nsec;
|
|
info->date_sec = sn.date_sec;
|
|
info->vm_state_size = sn.vm_state_size;
|
|
info->vm_clock_nsec = sn.vm_clock_nsec % 1000000000;
|
|
info->vm_clock_sec = sn.vm_clock_nsec / 1000000000;
|
|
|
|
return info;
|
|
}
|
|
|
|
/* New and old BlockDriverState structs for group snapshots */
|
|
|
|
typedef struct BlkTransactionState BlkTransactionState;
|
|
|
|
/* Only prepare() may fail. In a single transaction, only one of commit() or
|
|
abort() will be called, clean() will always be called if it present. */
|
|
typedef struct BdrvActionOps {
|
|
/* Size of state struct, in bytes. */
|
|
size_t instance_size;
|
|
/* Prepare the work, must NOT be NULL. */
|
|
void (*prepare)(BlkTransactionState *common, Error **errp);
|
|
/* Commit the changes, can be NULL. */
|
|
void (*commit)(BlkTransactionState *common);
|
|
/* Abort the changes on fail, can be NULL. */
|
|
void (*abort)(BlkTransactionState *common);
|
|
/* Clean up resource in the end, can be NULL. */
|
|
void (*clean)(BlkTransactionState *common);
|
|
} BdrvActionOps;
|
|
|
|
/*
|
|
* This structure must be arranged as first member in child type, assuming
|
|
* that compiler will also arrange it to the same address with parent instance.
|
|
* Later it will be used in free().
|
|
*/
|
|
struct BlkTransactionState {
|
|
TransactionAction *action;
|
|
const BdrvActionOps *ops;
|
|
QSIMPLEQ_ENTRY(BlkTransactionState) entry;
|
|
};
|
|
|
|
/* internal snapshot private data */
|
|
typedef struct InternalSnapshotState {
|
|
BlkTransactionState common;
|
|
BlockDriverState *bs;
|
|
QEMUSnapshotInfo sn;
|
|
} InternalSnapshotState;
|
|
|
|
static void internal_snapshot_prepare(BlkTransactionState *common,
|
|
Error **errp)
|
|
{
|
|
Error *local_err = NULL;
|
|
const char *device;
|
|
const char *name;
|
|
BlockDriverState *bs;
|
|
QEMUSnapshotInfo old_sn, *sn;
|
|
bool ret;
|
|
qemu_timeval tv;
|
|
BlockdevSnapshotInternal *internal;
|
|
InternalSnapshotState *state;
|
|
int ret1;
|
|
|
|
g_assert(common->action->kind ==
|
|
TRANSACTION_ACTION_KIND_BLOCKDEV_SNAPSHOT_INTERNAL_SYNC);
|
|
internal = common->action->blockdev_snapshot_internal_sync;
|
|
state = DO_UPCAST(InternalSnapshotState, common, common);
|
|
|
|
/* 1. parse input */
|
|
device = internal->device;
|
|
name = internal->name;
|
|
|
|
/* 2. check for validation */
|
|
bs = bdrv_find(device);
|
|
if (!bs) {
|
|
error_set(errp, QERR_DEVICE_NOT_FOUND, device);
|
|
return;
|
|
}
|
|
|
|
if (!bdrv_is_inserted(bs)) {
|
|
error_set(errp, QERR_DEVICE_HAS_NO_MEDIUM, device);
|
|
return;
|
|
}
|
|
|
|
if (bdrv_is_read_only(bs)) {
|
|
error_set(errp, QERR_DEVICE_IS_READ_ONLY, device);
|
|
return;
|
|
}
|
|
|
|
if (!bdrv_can_snapshot(bs)) {
|
|
error_set(errp, QERR_BLOCK_FORMAT_FEATURE_NOT_SUPPORTED,
|
|
bs->drv->format_name, device, "internal snapshot");
|
|
return;
|
|
}
|
|
|
|
if (!strlen(name)) {
|
|
error_setg(errp, "Name is empty");
|
|
return;
|
|
}
|
|
|
|
/* check whether a snapshot with name exist */
|
|
ret = bdrv_snapshot_find_by_id_and_name(bs, NULL, name, &old_sn,
|
|
&local_err);
|
|
if (local_err) {
|
|
error_propagate(errp, local_err);
|
|
return;
|
|
} else if (ret) {
|
|
error_setg(errp,
|
|
"Snapshot with name '%s' already exists on device '%s'",
|
|
name, device);
|
|
return;
|
|
}
|
|
|
|
/* 3. take the snapshot */
|
|
sn = &state->sn;
|
|
pstrcpy(sn->name, sizeof(sn->name), name);
|
|
qemu_gettimeofday(&tv);
|
|
sn->date_sec = tv.tv_sec;
|
|
sn->date_nsec = tv.tv_usec * 1000;
|
|
sn->vm_clock_nsec = qemu_clock_get_ns(QEMU_CLOCK_VIRTUAL);
|
|
|
|
ret1 = bdrv_snapshot_create(bs, sn);
|
|
if (ret1 < 0) {
|
|
error_setg_errno(errp, -ret1,
|
|
"Failed to create snapshot '%s' on device '%s'",
|
|
name, device);
|
|
return;
|
|
}
|
|
|
|
/* 4. succeed, mark a snapshot is created */
|
|
state->bs = bs;
|
|
}
|
|
|
|
static void internal_snapshot_abort(BlkTransactionState *common)
|
|
{
|
|
InternalSnapshotState *state =
|
|
DO_UPCAST(InternalSnapshotState, common, common);
|
|
BlockDriverState *bs = state->bs;
|
|
QEMUSnapshotInfo *sn = &state->sn;
|
|
Error *local_error = NULL;
|
|
|
|
if (!bs) {
|
|
return;
|
|
}
|
|
|
|
if (bdrv_snapshot_delete(bs, sn->id_str, sn->name, &local_error) < 0) {
|
|
error_report("Failed to delete snapshot with id '%s' and name '%s' on "
|
|
"device '%s' in abort: %s",
|
|
sn->id_str,
|
|
sn->name,
|
|
bdrv_get_device_name(bs),
|
|
error_get_pretty(local_error));
|
|
error_free(local_error);
|
|
}
|
|
}
|
|
|
|
/* external snapshot private data */
|
|
typedef struct ExternalSnapshotState {
|
|
BlkTransactionState common;
|
|
BlockDriverState *old_bs;
|
|
BlockDriverState *new_bs;
|
|
} ExternalSnapshotState;
|
|
|
|
static void external_snapshot_prepare(BlkTransactionState *common,
|
|
Error **errp)
|
|
{
|
|
BlockDriver *drv;
|
|
int flags, ret;
|
|
QDict *options = NULL;
|
|
Error *local_err = NULL;
|
|
bool has_device = false;
|
|
const char *device;
|
|
bool has_node_name = false;
|
|
const char *node_name;
|
|
bool has_snapshot_node_name = false;
|
|
const char *snapshot_node_name;
|
|
const char *new_image_file;
|
|
const char *format = "qcow2";
|
|
enum NewImageMode mode = NEW_IMAGE_MODE_ABSOLUTE_PATHS;
|
|
ExternalSnapshotState *state =
|
|
DO_UPCAST(ExternalSnapshotState, common, common);
|
|
TransactionAction *action = common->action;
|
|
|
|
/* get parameters */
|
|
g_assert(action->kind == TRANSACTION_ACTION_KIND_BLOCKDEV_SNAPSHOT_SYNC);
|
|
|
|
has_device = action->blockdev_snapshot_sync->has_device;
|
|
device = action->blockdev_snapshot_sync->device;
|
|
has_node_name = action->blockdev_snapshot_sync->has_node_name;
|
|
node_name = action->blockdev_snapshot_sync->node_name;
|
|
has_snapshot_node_name =
|
|
action->blockdev_snapshot_sync->has_snapshot_node_name;
|
|
snapshot_node_name = action->blockdev_snapshot_sync->snapshot_node_name;
|
|
|
|
new_image_file = action->blockdev_snapshot_sync->snapshot_file;
|
|
if (action->blockdev_snapshot_sync->has_format) {
|
|
format = action->blockdev_snapshot_sync->format;
|
|
}
|
|
if (action->blockdev_snapshot_sync->has_mode) {
|
|
mode = action->blockdev_snapshot_sync->mode;
|
|
}
|
|
|
|
/* start processing */
|
|
drv = bdrv_find_format(format);
|
|
if (!drv) {
|
|
error_set(errp, QERR_INVALID_BLOCK_FORMAT, format);
|
|
return;
|
|
}
|
|
|
|
state->old_bs = bdrv_lookup_bs(has_device ? device : NULL,
|
|
has_node_name ? node_name : NULL,
|
|
&local_err);
|
|
if (local_err) {
|
|
error_propagate(errp, local_err);
|
|
return;
|
|
}
|
|
|
|
if (has_node_name && !has_snapshot_node_name) {
|
|
error_setg(errp, "New snapshot node name missing");
|
|
return;
|
|
}
|
|
|
|
if (has_snapshot_node_name && bdrv_find_node(snapshot_node_name)) {
|
|
error_setg(errp, "New snapshot node name already existing");
|
|
return;
|
|
}
|
|
|
|
if (!bdrv_is_inserted(state->old_bs)) {
|
|
error_set(errp, QERR_DEVICE_HAS_NO_MEDIUM, device);
|
|
return;
|
|
}
|
|
|
|
if (bdrv_op_is_blocked(state->old_bs,
|
|
BLOCK_OP_TYPE_EXTERNAL_SNAPSHOT, errp)) {
|
|
return;
|
|
}
|
|
|
|
if (!bdrv_is_read_only(state->old_bs)) {
|
|
if (bdrv_flush(state->old_bs)) {
|
|
error_set(errp, QERR_IO_ERROR);
|
|
return;
|
|
}
|
|
}
|
|
|
|
if (!bdrv_is_first_non_filter(state->old_bs)) {
|
|
error_set(errp, QERR_FEATURE_DISABLED, "snapshot");
|
|
return;
|
|
}
|
|
|
|
flags = state->old_bs->open_flags;
|
|
|
|
/* create new image w/backing file */
|
|
if (mode != NEW_IMAGE_MODE_EXISTING) {
|
|
bdrv_img_create(new_image_file, format,
|
|
state->old_bs->filename,
|
|
state->old_bs->drv->format_name,
|
|
NULL, -1, flags, &local_err, false);
|
|
if (local_err) {
|
|
error_propagate(errp, local_err);
|
|
return;
|
|
}
|
|
}
|
|
|
|
if (has_snapshot_node_name) {
|
|
options = qdict_new();
|
|
qdict_put(options, "node-name",
|
|
qstring_from_str(snapshot_node_name));
|
|
}
|
|
|
|
/* TODO Inherit bs->options or only take explicit options with an
|
|
* extended QMP command? */
|
|
assert(state->new_bs == NULL);
|
|
ret = bdrv_open(&state->new_bs, new_image_file, NULL, options,
|
|
flags | BDRV_O_NO_BACKING, drv, &local_err);
|
|
/* We will manually add the backing_hd field to the bs later */
|
|
if (ret != 0) {
|
|
error_propagate(errp, local_err);
|
|
}
|
|
}
|
|
|
|
static void external_snapshot_commit(BlkTransactionState *common)
|
|
{
|
|
ExternalSnapshotState *state =
|
|
DO_UPCAST(ExternalSnapshotState, common, common);
|
|
|
|
/* This removes our old bs and adds the new bs */
|
|
bdrv_append(state->new_bs, state->old_bs);
|
|
/* We don't need (or want) to use the transactional
|
|
* bdrv_reopen_multiple() across all the entries at once, because we
|
|
* don't want to abort all of them if one of them fails the reopen */
|
|
bdrv_reopen(state->new_bs, state->new_bs->open_flags & ~BDRV_O_RDWR,
|
|
NULL);
|
|
}
|
|
|
|
static void external_snapshot_abort(BlkTransactionState *common)
|
|
{
|
|
ExternalSnapshotState *state =
|
|
DO_UPCAST(ExternalSnapshotState, common, common);
|
|
if (state->new_bs) {
|
|
bdrv_unref(state->new_bs);
|
|
}
|
|
}
|
|
|
|
typedef struct DriveBackupState {
|
|
BlkTransactionState common;
|
|
BlockDriverState *bs;
|
|
BlockJob *job;
|
|
} DriveBackupState;
|
|
|
|
static void drive_backup_prepare(BlkTransactionState *common, Error **errp)
|
|
{
|
|
DriveBackupState *state = DO_UPCAST(DriveBackupState, common, common);
|
|
DriveBackup *backup;
|
|
Error *local_err = NULL;
|
|
|
|
assert(common->action->kind == TRANSACTION_ACTION_KIND_DRIVE_BACKUP);
|
|
backup = common->action->drive_backup;
|
|
|
|
qmp_drive_backup(backup->device, backup->target,
|
|
backup->has_format, backup->format,
|
|
backup->sync,
|
|
backup->has_mode, backup->mode,
|
|
backup->has_speed, backup->speed,
|
|
backup->has_on_source_error, backup->on_source_error,
|
|
backup->has_on_target_error, backup->on_target_error,
|
|
&local_err);
|
|
if (local_err) {
|
|
error_propagate(errp, local_err);
|
|
state->bs = NULL;
|
|
state->job = NULL;
|
|
return;
|
|
}
|
|
|
|
state->bs = bdrv_find(backup->device);
|
|
state->job = state->bs->job;
|
|
}
|
|
|
|
static void drive_backup_abort(BlkTransactionState *common)
|
|
{
|
|
DriveBackupState *state = DO_UPCAST(DriveBackupState, common, common);
|
|
BlockDriverState *bs = state->bs;
|
|
|
|
/* Only cancel if it's the job we started */
|
|
if (bs && bs->job && bs->job == state->job) {
|
|
block_job_cancel_sync(bs->job);
|
|
}
|
|
}
|
|
|
|
static void abort_prepare(BlkTransactionState *common, Error **errp)
|
|
{
|
|
error_setg(errp, "Transaction aborted using Abort action");
|
|
}
|
|
|
|
static void abort_commit(BlkTransactionState *common)
|
|
{
|
|
g_assert_not_reached(); /* this action never succeeds */
|
|
}
|
|
|
|
static const BdrvActionOps actions[] = {
|
|
[TRANSACTION_ACTION_KIND_BLOCKDEV_SNAPSHOT_SYNC] = {
|
|
.instance_size = sizeof(ExternalSnapshotState),
|
|
.prepare = external_snapshot_prepare,
|
|
.commit = external_snapshot_commit,
|
|
.abort = external_snapshot_abort,
|
|
},
|
|
[TRANSACTION_ACTION_KIND_DRIVE_BACKUP] = {
|
|
.instance_size = sizeof(DriveBackupState),
|
|
.prepare = drive_backup_prepare,
|
|
.abort = drive_backup_abort,
|
|
},
|
|
[TRANSACTION_ACTION_KIND_ABORT] = {
|
|
.instance_size = sizeof(BlkTransactionState),
|
|
.prepare = abort_prepare,
|
|
.commit = abort_commit,
|
|
},
|
|
[TRANSACTION_ACTION_KIND_BLOCKDEV_SNAPSHOT_INTERNAL_SYNC] = {
|
|
.instance_size = sizeof(InternalSnapshotState),
|
|
.prepare = internal_snapshot_prepare,
|
|
.abort = internal_snapshot_abort,
|
|
},
|
|
};
|
|
|
|
/*
|
|
* 'Atomic' group snapshots. The snapshots are taken as a set, and if any fail
|
|
* then we do not pivot any of the devices in the group, and abandon the
|
|
* snapshots
|
|
*/
|
|
void qmp_transaction(TransactionActionList *dev_list, Error **errp)
|
|
{
|
|
TransactionActionList *dev_entry = dev_list;
|
|
BlkTransactionState *state, *next;
|
|
Error *local_err = NULL;
|
|
|
|
QSIMPLEQ_HEAD(snap_bdrv_states, BlkTransactionState) snap_bdrv_states;
|
|
QSIMPLEQ_INIT(&snap_bdrv_states);
|
|
|
|
/* drain all i/o before any snapshots */
|
|
bdrv_drain_all();
|
|
|
|
/* We don't do anything in this loop that commits us to the snapshot */
|
|
while (NULL != dev_entry) {
|
|
TransactionAction *dev_info = NULL;
|
|
const BdrvActionOps *ops;
|
|
|
|
dev_info = dev_entry->value;
|
|
dev_entry = dev_entry->next;
|
|
|
|
assert(dev_info->kind < ARRAY_SIZE(actions));
|
|
|
|
ops = &actions[dev_info->kind];
|
|
assert(ops->instance_size > 0);
|
|
|
|
state = g_malloc0(ops->instance_size);
|
|
state->ops = ops;
|
|
state->action = dev_info;
|
|
QSIMPLEQ_INSERT_TAIL(&snap_bdrv_states, state, entry);
|
|
|
|
state->ops->prepare(state, &local_err);
|
|
if (local_err) {
|
|
error_propagate(errp, local_err);
|
|
goto delete_and_fail;
|
|
}
|
|
}
|
|
|
|
QSIMPLEQ_FOREACH(state, &snap_bdrv_states, entry) {
|
|
if (state->ops->commit) {
|
|
state->ops->commit(state);
|
|
}
|
|
}
|
|
|
|
/* success */
|
|
goto exit;
|
|
|
|
delete_and_fail:
|
|
/*
|
|
* failure, and it is all-or-none; abandon each new bs, and keep using
|
|
* the original bs for all images
|
|
*/
|
|
QSIMPLEQ_FOREACH(state, &snap_bdrv_states, entry) {
|
|
if (state->ops->abort) {
|
|
state->ops->abort(state);
|
|
}
|
|
}
|
|
exit:
|
|
QSIMPLEQ_FOREACH_SAFE(state, &snap_bdrv_states, entry, next) {
|
|
if (state->ops->clean) {
|
|
state->ops->clean(state);
|
|
}
|
|
g_free(state);
|
|
}
|
|
}
|
|
|
|
|
|
static void eject_device(BlockDriverState *bs, int force, Error **errp)
|
|
{
|
|
if (bdrv_op_is_blocked(bs, BLOCK_OP_TYPE_EJECT, errp)) {
|
|
return;
|
|
}
|
|
if (!bdrv_dev_has_removable_media(bs)) {
|
|
error_setg(errp, "Device '%s' is not removable",
|
|
bdrv_get_device_name(bs));
|
|
return;
|
|
}
|
|
|
|
if (bdrv_dev_is_medium_locked(bs) && !bdrv_dev_is_tray_open(bs)) {
|
|
bdrv_dev_eject_request(bs, force);
|
|
if (!force) {
|
|
error_setg(errp, "Device '%s' is locked",
|
|
bdrv_get_device_name(bs));
|
|
return;
|
|
}
|
|
}
|
|
|
|
bdrv_close(bs);
|
|
}
|
|
|
|
void qmp_eject(const char *device, bool has_force, bool force, Error **errp)
|
|
{
|
|
BlockDriverState *bs;
|
|
|
|
bs = bdrv_find(device);
|
|
if (!bs) {
|
|
error_set(errp, QERR_DEVICE_NOT_FOUND, device);
|
|
return;
|
|
}
|
|
|
|
eject_device(bs, force, errp);
|
|
}
|
|
|
|
void qmp_block_passwd(bool has_device, const char *device,
|
|
bool has_node_name, const char *node_name,
|
|
const char *password, Error **errp)
|
|
{
|
|
Error *local_err = NULL;
|
|
BlockDriverState *bs;
|
|
int err;
|
|
|
|
bs = bdrv_lookup_bs(has_device ? device : NULL,
|
|
has_node_name ? node_name : NULL,
|
|
&local_err);
|
|
if (local_err) {
|
|
error_propagate(errp, local_err);
|
|
return;
|
|
}
|
|
|
|
err = bdrv_set_key(bs, password);
|
|
if (err == -EINVAL) {
|
|
error_set(errp, QERR_DEVICE_NOT_ENCRYPTED, bdrv_get_device_name(bs));
|
|
return;
|
|
} else if (err < 0) {
|
|
error_set(errp, QERR_INVALID_PASSWORD);
|
|
return;
|
|
}
|
|
}
|
|
|
|
static void qmp_bdrv_open_encrypted(BlockDriverState *bs, const char *filename,
|
|
int bdrv_flags, BlockDriver *drv,
|
|
const char *password, Error **errp)
|
|
{
|
|
Error *local_err = NULL;
|
|
int ret;
|
|
|
|
ret = bdrv_open(&bs, filename, NULL, NULL, bdrv_flags, drv, &local_err);
|
|
if (ret < 0) {
|
|
error_propagate(errp, local_err);
|
|
return;
|
|
}
|
|
|
|
if (bdrv_key_required(bs)) {
|
|
if (password) {
|
|
if (bdrv_set_key(bs, password) < 0) {
|
|
error_set(errp, QERR_INVALID_PASSWORD);
|
|
}
|
|
} else {
|
|
error_set(errp, QERR_DEVICE_ENCRYPTED, bdrv_get_device_name(bs),
|
|
bdrv_get_encrypted_filename(bs));
|
|
}
|
|
} else if (password) {
|
|
error_set(errp, QERR_DEVICE_NOT_ENCRYPTED, bdrv_get_device_name(bs));
|
|
}
|
|
}
|
|
|
|
void qmp_change_blockdev(const char *device, const char *filename,
|
|
const char *format, Error **errp)
|
|
{
|
|
BlockDriverState *bs;
|
|
BlockDriver *drv = NULL;
|
|
int bdrv_flags;
|
|
Error *err = NULL;
|
|
|
|
bs = bdrv_find(device);
|
|
if (!bs) {
|
|
error_set(errp, QERR_DEVICE_NOT_FOUND, device);
|
|
return;
|
|
}
|
|
|
|
if (format) {
|
|
drv = bdrv_find_whitelisted_format(format, bs->read_only);
|
|
if (!drv) {
|
|
error_set(errp, QERR_INVALID_BLOCK_FORMAT, format);
|
|
return;
|
|
}
|
|
}
|
|
|
|
eject_device(bs, 0, &err);
|
|
if (err) {
|
|
error_propagate(errp, err);
|
|
return;
|
|
}
|
|
|
|
bdrv_flags = bdrv_is_read_only(bs) ? 0 : BDRV_O_RDWR;
|
|
bdrv_flags |= bdrv_is_snapshot(bs) ? BDRV_O_SNAPSHOT : 0;
|
|
|
|
qmp_bdrv_open_encrypted(bs, filename, bdrv_flags, drv, NULL, errp);
|
|
}
|
|
|
|
/* throttling disk I/O limits */
|
|
void qmp_block_set_io_throttle(const char *device, int64_t bps, int64_t bps_rd,
|
|
int64_t bps_wr,
|
|
int64_t iops,
|
|
int64_t iops_rd,
|
|
int64_t iops_wr,
|
|
bool has_bps_max,
|
|
int64_t bps_max,
|
|
bool has_bps_rd_max,
|
|
int64_t bps_rd_max,
|
|
bool has_bps_wr_max,
|
|
int64_t bps_wr_max,
|
|
bool has_iops_max,
|
|
int64_t iops_max,
|
|
bool has_iops_rd_max,
|
|
int64_t iops_rd_max,
|
|
bool has_iops_wr_max,
|
|
int64_t iops_wr_max,
|
|
bool has_iops_size,
|
|
int64_t iops_size, Error **errp)
|
|
{
|
|
ThrottleConfig cfg;
|
|
BlockDriverState *bs;
|
|
AioContext *aio_context;
|
|
|
|
bs = bdrv_find(device);
|
|
if (!bs) {
|
|
error_set(errp, QERR_DEVICE_NOT_FOUND, device);
|
|
return;
|
|
}
|
|
|
|
memset(&cfg, 0, sizeof(cfg));
|
|
cfg.buckets[THROTTLE_BPS_TOTAL].avg = bps;
|
|
cfg.buckets[THROTTLE_BPS_READ].avg = bps_rd;
|
|
cfg.buckets[THROTTLE_BPS_WRITE].avg = bps_wr;
|
|
|
|
cfg.buckets[THROTTLE_OPS_TOTAL].avg = iops;
|
|
cfg.buckets[THROTTLE_OPS_READ].avg = iops_rd;
|
|
cfg.buckets[THROTTLE_OPS_WRITE].avg = iops_wr;
|
|
|
|
if (has_bps_max) {
|
|
cfg.buckets[THROTTLE_BPS_TOTAL].max = bps_max;
|
|
}
|
|
if (has_bps_rd_max) {
|
|
cfg.buckets[THROTTLE_BPS_READ].max = bps_rd_max;
|
|
}
|
|
if (has_bps_wr_max) {
|
|
cfg.buckets[THROTTLE_BPS_WRITE].max = bps_wr_max;
|
|
}
|
|
if (has_iops_max) {
|
|
cfg.buckets[THROTTLE_OPS_TOTAL].max = iops_max;
|
|
}
|
|
if (has_iops_rd_max) {
|
|
cfg.buckets[THROTTLE_OPS_READ].max = iops_rd_max;
|
|
}
|
|
if (has_iops_wr_max) {
|
|
cfg.buckets[THROTTLE_OPS_WRITE].max = iops_wr_max;
|
|
}
|
|
|
|
if (has_iops_size) {
|
|
cfg.op_size = iops_size;
|
|
}
|
|
|
|
if (!check_throttle_config(&cfg, errp)) {
|
|
return;
|
|
}
|
|
|
|
aio_context = bdrv_get_aio_context(bs);
|
|
aio_context_acquire(aio_context);
|
|
|
|
if (!bs->io_limits_enabled && throttle_enabled(&cfg)) {
|
|
bdrv_io_limits_enable(bs);
|
|
} else if (bs->io_limits_enabled && !throttle_enabled(&cfg)) {
|
|
bdrv_io_limits_disable(bs);
|
|
}
|
|
|
|
if (bs->io_limits_enabled) {
|
|
bdrv_set_io_limits(bs, &cfg);
|
|
}
|
|
|
|
aio_context_release(aio_context);
|
|
}
|
|
|
|
int do_drive_del(Monitor *mon, const QDict *qdict, QObject **ret_data)
|
|
{
|
|
const char *id = qdict_get_str(qdict, "id");
|
|
BlockDriverState *bs;
|
|
Error *local_err = NULL;
|
|
|
|
bs = bdrv_find(id);
|
|
if (!bs) {
|
|
error_report("Device '%s' not found", id);
|
|
return -1;
|
|
}
|
|
if (bdrv_op_is_blocked(bs, BLOCK_OP_TYPE_DRIVE_DEL, &local_err)) {
|
|
error_report("%s", error_get_pretty(local_err));
|
|
error_free(local_err);
|
|
return -1;
|
|
}
|
|
|
|
/* quiesce block driver; prevent further io */
|
|
bdrv_drain_all();
|
|
bdrv_flush(bs);
|
|
bdrv_close(bs);
|
|
|
|
/* if we have a device attached to this BlockDriverState
|
|
* then we need to make the drive anonymous until the device
|
|
* can be removed. If this is a drive with no device backing
|
|
* then we can just get rid of the block driver state right here.
|
|
*/
|
|
if (bdrv_get_attached_dev(bs)) {
|
|
bdrv_make_anon(bs);
|
|
|
|
/* Further I/O must not pause the guest */
|
|
bdrv_set_on_error(bs, BLOCKDEV_ON_ERROR_REPORT,
|
|
BLOCKDEV_ON_ERROR_REPORT);
|
|
} else {
|
|
drive_del(drive_get_by_blockdev(bs));
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
void qmp_block_resize(bool has_device, const char *device,
|
|
bool has_node_name, const char *node_name,
|
|
int64_t size, Error **errp)
|
|
{
|
|
Error *local_err = NULL;
|
|
BlockDriverState *bs;
|
|
int ret;
|
|
|
|
bs = bdrv_lookup_bs(has_device ? device : NULL,
|
|
has_node_name ? node_name : NULL,
|
|
&local_err);
|
|
if (local_err) {
|
|
error_propagate(errp, local_err);
|
|
return;
|
|
}
|
|
|
|
if (!bdrv_is_first_non_filter(bs)) {
|
|
error_set(errp, QERR_FEATURE_DISABLED, "resize");
|
|
return;
|
|
}
|
|
|
|
if (size < 0) {
|
|
error_set(errp, QERR_INVALID_PARAMETER_VALUE, "size", "a >0 size");
|
|
return;
|
|
}
|
|
|
|
if (bdrv_op_is_blocked(bs, BLOCK_OP_TYPE_RESIZE, NULL)) {
|
|
error_set(errp, QERR_DEVICE_IN_USE, device);
|
|
return;
|
|
}
|
|
|
|
/* complete all in-flight operations before resizing the device */
|
|
bdrv_drain_all();
|
|
|
|
ret = bdrv_truncate(bs, size);
|
|
switch (ret) {
|
|
case 0:
|
|
break;
|
|
case -ENOMEDIUM:
|
|
error_set(errp, QERR_DEVICE_HAS_NO_MEDIUM, device);
|
|
break;
|
|
case -ENOTSUP:
|
|
error_set(errp, QERR_UNSUPPORTED);
|
|
break;
|
|
case -EACCES:
|
|
error_set(errp, QERR_DEVICE_IS_READ_ONLY, device);
|
|
break;
|
|
case -EBUSY:
|
|
error_set(errp, QERR_DEVICE_IN_USE, device);
|
|
break;
|
|
default:
|
|
error_setg_errno(errp, -ret, "Could not resize");
|
|
break;
|
|
}
|
|
}
|
|
|
|
static void block_job_cb(void *opaque, int ret)
|
|
{
|
|
BlockDriverState *bs = opaque;
|
|
const char *msg = NULL;
|
|
|
|
trace_block_job_cb(bs, bs->job, ret);
|
|
|
|
assert(bs->job);
|
|
|
|
if (ret < 0) {
|
|
msg = strerror(-ret);
|
|
}
|
|
|
|
if (block_job_is_cancelled(bs->job)) {
|
|
block_job_event_cancelled(bs->job);
|
|
} else {
|
|
block_job_event_completed(bs->job, msg);
|
|
}
|
|
|
|
bdrv_put_ref_bh_schedule(bs);
|
|
}
|
|
|
|
void qmp_block_stream(const char *device,
|
|
bool has_base, const char *base,
|
|
bool has_backing_file, const char *backing_file,
|
|
bool has_speed, int64_t speed,
|
|
bool has_on_error, BlockdevOnError on_error,
|
|
Error **errp)
|
|
{
|
|
BlockDriverState *bs;
|
|
BlockDriverState *base_bs = NULL;
|
|
Error *local_err = NULL;
|
|
const char *base_name = NULL;
|
|
|
|
if (!has_on_error) {
|
|
on_error = BLOCKDEV_ON_ERROR_REPORT;
|
|
}
|
|
|
|
bs = bdrv_find(device);
|
|
if (!bs) {
|
|
error_set(errp, QERR_DEVICE_NOT_FOUND, device);
|
|
return;
|
|
}
|
|
|
|
if (bdrv_op_is_blocked(bs, BLOCK_OP_TYPE_STREAM, errp)) {
|
|
return;
|
|
}
|
|
|
|
if (has_base) {
|
|
base_bs = bdrv_find_backing_image(bs, base);
|
|
if (base_bs == NULL) {
|
|
error_set(errp, QERR_BASE_NOT_FOUND, base);
|
|
return;
|
|
}
|
|
base_name = base;
|
|
}
|
|
|
|
/* if we are streaming the entire chain, the result will have no backing
|
|
* file, and specifying one is therefore an error */
|
|
if (base_bs == NULL && has_backing_file) {
|
|
error_setg(errp, "backing file specified, but streaming the "
|
|
"entire chain");
|
|
return;
|
|
}
|
|
|
|
/* backing_file string overrides base bs filename */
|
|
base_name = has_backing_file ? backing_file : base_name;
|
|
|
|
stream_start(bs, base_bs, base_name, has_speed ? speed : 0,
|
|
on_error, block_job_cb, bs, &local_err);
|
|
if (local_err) {
|
|
error_propagate(errp, local_err);
|
|
return;
|
|
}
|
|
|
|
trace_qmp_block_stream(bs, bs->job);
|
|
}
|
|
|
|
void qmp_block_commit(const char *device,
|
|
bool has_base, const char *base,
|
|
bool has_top, const char *top,
|
|
bool has_backing_file, const char *backing_file,
|
|
bool has_speed, int64_t speed,
|
|
Error **errp)
|
|
{
|
|
BlockDriverState *bs;
|
|
BlockDriverState *base_bs, *top_bs;
|
|
Error *local_err = NULL;
|
|
/* This will be part of the QMP command, if/when the
|
|
* BlockdevOnError change for blkmirror makes it in
|
|
*/
|
|
BlockdevOnError on_error = BLOCKDEV_ON_ERROR_REPORT;
|
|
|
|
if (!has_speed) {
|
|
speed = 0;
|
|
}
|
|
|
|
/* drain all i/o before commits */
|
|
bdrv_drain_all();
|
|
|
|
/* Important Note:
|
|
* libvirt relies on the DeviceNotFound error class in order to probe for
|
|
* live commit feature versions; for this to work, we must make sure to
|
|
* perform the device lookup before any generic errors that may occur in a
|
|
* scenario in which all optional arguments are omitted. */
|
|
bs = bdrv_find(device);
|
|
if (!bs) {
|
|
error_set(errp, QERR_DEVICE_NOT_FOUND, device);
|
|
return;
|
|
}
|
|
|
|
if (bdrv_op_is_blocked(bs, BLOCK_OP_TYPE_COMMIT, errp)) {
|
|
return;
|
|
}
|
|
|
|
/* default top_bs is the active layer */
|
|
top_bs = bs;
|
|
|
|
if (has_top && top) {
|
|
if (strcmp(bs->filename, top) != 0) {
|
|
top_bs = bdrv_find_backing_image(bs, top);
|
|
}
|
|
}
|
|
|
|
if (top_bs == NULL) {
|
|
error_setg(errp, "Top image file %s not found", top ? top : "NULL");
|
|
return;
|
|
}
|
|
|
|
if (has_base && base) {
|
|
base_bs = bdrv_find_backing_image(top_bs, base);
|
|
} else {
|
|
base_bs = bdrv_find_base(top_bs);
|
|
}
|
|
|
|
if (base_bs == NULL) {
|
|
error_set(errp, QERR_BASE_NOT_FOUND, base ? base : "NULL");
|
|
return;
|
|
}
|
|
|
|
/* Do not allow attempts to commit an image into itself */
|
|
if (top_bs == base_bs) {
|
|
error_setg(errp, "cannot commit an image into itself");
|
|
return;
|
|
}
|
|
|
|
if (top_bs == bs) {
|
|
if (has_backing_file) {
|
|
error_setg(errp, "'backing-file' specified,"
|
|
" but 'top' is the active layer");
|
|
return;
|
|
}
|
|
commit_active_start(bs, base_bs, speed, on_error, block_job_cb,
|
|
bs, &local_err);
|
|
} else {
|
|
commit_start(bs, base_bs, top_bs, speed, on_error, block_job_cb, bs,
|
|
has_backing_file ? backing_file : NULL, &local_err);
|
|
}
|
|
if (local_err != NULL) {
|
|
error_propagate(errp, local_err);
|
|
return;
|
|
}
|
|
}
|
|
|
|
void qmp_drive_backup(const char *device, const char *target,
|
|
bool has_format, const char *format,
|
|
enum MirrorSyncMode sync,
|
|
bool has_mode, enum NewImageMode mode,
|
|
bool has_speed, int64_t speed,
|
|
bool has_on_source_error, BlockdevOnError on_source_error,
|
|
bool has_on_target_error, BlockdevOnError on_target_error,
|
|
Error **errp)
|
|
{
|
|
BlockDriverState *bs;
|
|
BlockDriverState *target_bs;
|
|
BlockDriverState *source = NULL;
|
|
BlockDriver *drv = NULL;
|
|
Error *local_err = NULL;
|
|
int flags;
|
|
int64_t size;
|
|
int ret;
|
|
|
|
if (!has_speed) {
|
|
speed = 0;
|
|
}
|
|
if (!has_on_source_error) {
|
|
on_source_error = BLOCKDEV_ON_ERROR_REPORT;
|
|
}
|
|
if (!has_on_target_error) {
|
|
on_target_error = BLOCKDEV_ON_ERROR_REPORT;
|
|
}
|
|
if (!has_mode) {
|
|
mode = NEW_IMAGE_MODE_ABSOLUTE_PATHS;
|
|
}
|
|
|
|
bs = bdrv_find(device);
|
|
if (!bs) {
|
|
error_set(errp, QERR_DEVICE_NOT_FOUND, device);
|
|
return;
|
|
}
|
|
|
|
if (!bdrv_is_inserted(bs)) {
|
|
error_set(errp, QERR_DEVICE_HAS_NO_MEDIUM, device);
|
|
return;
|
|
}
|
|
|
|
if (!has_format) {
|
|
format = mode == NEW_IMAGE_MODE_EXISTING ? NULL : bs->drv->format_name;
|
|
}
|
|
if (format) {
|
|
drv = bdrv_find_format(format);
|
|
if (!drv) {
|
|
error_set(errp, QERR_INVALID_BLOCK_FORMAT, format);
|
|
return;
|
|
}
|
|
}
|
|
|
|
if (bdrv_op_is_blocked(bs, BLOCK_OP_TYPE_BACKUP_SOURCE, errp)) {
|
|
return;
|
|
}
|
|
|
|
flags = bs->open_flags | BDRV_O_RDWR;
|
|
|
|
/* See if we have a backing HD we can use to create our new image
|
|
* on top of. */
|
|
if (sync == MIRROR_SYNC_MODE_TOP) {
|
|
source = bs->backing_hd;
|
|
if (!source) {
|
|
sync = MIRROR_SYNC_MODE_FULL;
|
|
}
|
|
}
|
|
if (sync == MIRROR_SYNC_MODE_NONE) {
|
|
source = bs;
|
|
}
|
|
|
|
size = bdrv_getlength(bs);
|
|
if (size < 0) {
|
|
error_setg_errno(errp, -size, "bdrv_getlength failed");
|
|
return;
|
|
}
|
|
|
|
if (mode != NEW_IMAGE_MODE_EXISTING) {
|
|
assert(format && drv);
|
|
if (source) {
|
|
bdrv_img_create(target, format, source->filename,
|
|
source->drv->format_name, NULL,
|
|
size, flags, &local_err, false);
|
|
} else {
|
|
bdrv_img_create(target, format, NULL, NULL, NULL,
|
|
size, flags, &local_err, false);
|
|
}
|
|
}
|
|
|
|
if (local_err) {
|
|
error_propagate(errp, local_err);
|
|
return;
|
|
}
|
|
|
|
target_bs = NULL;
|
|
ret = bdrv_open(&target_bs, target, NULL, NULL, flags, drv, &local_err);
|
|
if (ret < 0) {
|
|
error_propagate(errp, local_err);
|
|
return;
|
|
}
|
|
|
|
backup_start(bs, target_bs, speed, sync, on_source_error, on_target_error,
|
|
block_job_cb, bs, &local_err);
|
|
if (local_err != NULL) {
|
|
bdrv_unref(target_bs);
|
|
error_propagate(errp, local_err);
|
|
return;
|
|
}
|
|
}
|
|
|
|
BlockDeviceInfoList *qmp_query_named_block_nodes(Error **errp)
|
|
{
|
|
return bdrv_named_nodes_list();
|
|
}
|
|
|
|
#define DEFAULT_MIRROR_BUF_SIZE (10 << 20)
|
|
|
|
void qmp_drive_mirror(const char *device, const char *target,
|
|
bool has_format, const char *format,
|
|
bool has_node_name, const char *node_name,
|
|
bool has_replaces, const char *replaces,
|
|
enum MirrorSyncMode sync,
|
|
bool has_mode, enum NewImageMode mode,
|
|
bool has_speed, int64_t speed,
|
|
bool has_granularity, uint32_t granularity,
|
|
bool has_buf_size, int64_t buf_size,
|
|
bool has_on_source_error, BlockdevOnError on_source_error,
|
|
bool has_on_target_error, BlockdevOnError on_target_error,
|
|
Error **errp)
|
|
{
|
|
BlockDriverState *bs;
|
|
BlockDriverState *source, *target_bs;
|
|
BlockDriver *drv = NULL;
|
|
Error *local_err = NULL;
|
|
QDict *options = NULL;
|
|
int flags;
|
|
int64_t size;
|
|
int ret;
|
|
|
|
if (!has_speed) {
|
|
speed = 0;
|
|
}
|
|
if (!has_on_source_error) {
|
|
on_source_error = BLOCKDEV_ON_ERROR_REPORT;
|
|
}
|
|
if (!has_on_target_error) {
|
|
on_target_error = BLOCKDEV_ON_ERROR_REPORT;
|
|
}
|
|
if (!has_mode) {
|
|
mode = NEW_IMAGE_MODE_ABSOLUTE_PATHS;
|
|
}
|
|
if (!has_granularity) {
|
|
granularity = 0;
|
|
}
|
|
if (!has_buf_size) {
|
|
buf_size = DEFAULT_MIRROR_BUF_SIZE;
|
|
}
|
|
|
|
if (granularity != 0 && (granularity < 512 || granularity > 1048576 * 64)) {
|
|
error_set(errp, QERR_INVALID_PARAMETER, device);
|
|
return;
|
|
}
|
|
if (granularity & (granularity - 1)) {
|
|
error_set(errp, QERR_INVALID_PARAMETER, device);
|
|
return;
|
|
}
|
|
|
|
bs = bdrv_find(device);
|
|
if (!bs) {
|
|
error_set(errp, QERR_DEVICE_NOT_FOUND, device);
|
|
return;
|
|
}
|
|
|
|
if (!bdrv_is_inserted(bs)) {
|
|
error_set(errp, QERR_DEVICE_HAS_NO_MEDIUM, device);
|
|
return;
|
|
}
|
|
|
|
if (!has_format) {
|
|
format = mode == NEW_IMAGE_MODE_EXISTING ? NULL : bs->drv->format_name;
|
|
}
|
|
if (format) {
|
|
drv = bdrv_find_format(format);
|
|
if (!drv) {
|
|
error_set(errp, QERR_INVALID_BLOCK_FORMAT, format);
|
|
return;
|
|
}
|
|
}
|
|
|
|
if (bdrv_op_is_blocked(bs, BLOCK_OP_TYPE_MIRROR, errp)) {
|
|
return;
|
|
}
|
|
|
|
flags = bs->open_flags | BDRV_O_RDWR;
|
|
source = bs->backing_hd;
|
|
if (!source && sync == MIRROR_SYNC_MODE_TOP) {
|
|
sync = MIRROR_SYNC_MODE_FULL;
|
|
}
|
|
if (sync == MIRROR_SYNC_MODE_NONE) {
|
|
source = bs;
|
|
}
|
|
|
|
size = bdrv_getlength(bs);
|
|
if (size < 0) {
|
|
error_setg_errno(errp, -size, "bdrv_getlength failed");
|
|
return;
|
|
}
|
|
|
|
if (has_replaces) {
|
|
BlockDriverState *to_replace_bs;
|
|
|
|
if (!has_node_name) {
|
|
error_setg(errp, "a node-name must be provided when replacing a"
|
|
" named node of the graph");
|
|
return;
|
|
}
|
|
|
|
to_replace_bs = check_to_replace_node(replaces, &local_err);
|
|
|
|
if (!to_replace_bs) {
|
|
error_propagate(errp, local_err);
|
|
return;
|
|
}
|
|
|
|
if (size != bdrv_getlength(to_replace_bs)) {
|
|
error_setg(errp, "cannot replace image with a mirror image of "
|
|
"different size");
|
|
return;
|
|
}
|
|
}
|
|
|
|
if ((sync == MIRROR_SYNC_MODE_FULL || !source)
|
|
&& mode != NEW_IMAGE_MODE_EXISTING)
|
|
{
|
|
/* create new image w/o backing file */
|
|
assert(format && drv);
|
|
bdrv_img_create(target, format,
|
|
NULL, NULL, NULL, size, flags, &local_err, false);
|
|
} else {
|
|
switch (mode) {
|
|
case NEW_IMAGE_MODE_EXISTING:
|
|
break;
|
|
case NEW_IMAGE_MODE_ABSOLUTE_PATHS:
|
|
/* create new image with backing file */
|
|
bdrv_img_create(target, format,
|
|
source->filename,
|
|
source->drv->format_name,
|
|
NULL, size, flags, &local_err, false);
|
|
break;
|
|
default:
|
|
abort();
|
|
}
|
|
}
|
|
|
|
if (local_err) {
|
|
error_propagate(errp, local_err);
|
|
return;
|
|
}
|
|
|
|
if (has_node_name) {
|
|
options = qdict_new();
|
|
qdict_put(options, "node-name", qstring_from_str(node_name));
|
|
}
|
|
|
|
/* Mirroring takes care of copy-on-write using the source's backing
|
|
* file.
|
|
*/
|
|
target_bs = NULL;
|
|
ret = bdrv_open(&target_bs, target, NULL, options,
|
|
flags | BDRV_O_NO_BACKING, drv, &local_err);
|
|
if (ret < 0) {
|
|
error_propagate(errp, local_err);
|
|
return;
|
|
}
|
|
|
|
/* pass the node name to replace to mirror start since it's loose coupling
|
|
* and will allow to check whether the node still exist at mirror completion
|
|
*/
|
|
mirror_start(bs, target_bs,
|
|
has_replaces ? replaces : NULL,
|
|
speed, granularity, buf_size, sync,
|
|
on_source_error, on_target_error,
|
|
block_job_cb, bs, &local_err);
|
|
if (local_err != NULL) {
|
|
bdrv_unref(target_bs);
|
|
error_propagate(errp, local_err);
|
|
return;
|
|
}
|
|
}
|
|
|
|
static BlockJob *find_block_job(const char *device)
|
|
{
|
|
BlockDriverState *bs;
|
|
|
|
bs = bdrv_find(device);
|
|
if (!bs || !bs->job) {
|
|
return NULL;
|
|
}
|
|
return bs->job;
|
|
}
|
|
|
|
void qmp_block_job_set_speed(const char *device, int64_t speed, Error **errp)
|
|
{
|
|
BlockJob *job = find_block_job(device);
|
|
|
|
if (!job) {
|
|
error_set(errp, QERR_BLOCK_JOB_NOT_ACTIVE, device);
|
|
return;
|
|
}
|
|
|
|
block_job_set_speed(job, speed, errp);
|
|
}
|
|
|
|
void qmp_block_job_cancel(const char *device,
|
|
bool has_force, bool force, Error **errp)
|
|
{
|
|
BlockJob *job = find_block_job(device);
|
|
|
|
if (!has_force) {
|
|
force = false;
|
|
}
|
|
|
|
if (!job) {
|
|
error_set(errp, QERR_BLOCK_JOB_NOT_ACTIVE, device);
|
|
return;
|
|
}
|
|
if (job->paused && !force) {
|
|
error_setg(errp, "The block job for device '%s' is currently paused",
|
|
device);
|
|
return;
|
|
}
|
|
|
|
trace_qmp_block_job_cancel(job);
|
|
block_job_cancel(job);
|
|
}
|
|
|
|
void qmp_block_job_pause(const char *device, Error **errp)
|
|
{
|
|
BlockJob *job = find_block_job(device);
|
|
|
|
if (!job) {
|
|
error_set(errp, QERR_BLOCK_JOB_NOT_ACTIVE, device);
|
|
return;
|
|
}
|
|
|
|
trace_qmp_block_job_pause(job);
|
|
block_job_pause(job);
|
|
}
|
|
|
|
void qmp_block_job_resume(const char *device, Error **errp)
|
|
{
|
|
BlockJob *job = find_block_job(device);
|
|
|
|
if (!job) {
|
|
error_set(errp, QERR_BLOCK_JOB_NOT_ACTIVE, device);
|
|
return;
|
|
}
|
|
|
|
trace_qmp_block_job_resume(job);
|
|
block_job_resume(job);
|
|
}
|
|
|
|
void qmp_block_job_complete(const char *device, Error **errp)
|
|
{
|
|
BlockJob *job = find_block_job(device);
|
|
|
|
if (!job) {
|
|
error_set(errp, QERR_BLOCK_JOB_NOT_ACTIVE, device);
|
|
return;
|
|
}
|
|
|
|
trace_qmp_block_job_complete(job);
|
|
block_job_complete(job, errp);
|
|
}
|
|
|
|
void qmp_change_backing_file(const char *device,
|
|
const char *image_node_name,
|
|
const char *backing_file,
|
|
Error **errp)
|
|
{
|
|
BlockDriverState *bs = NULL;
|
|
BlockDriverState *image_bs = NULL;
|
|
Error *local_err = NULL;
|
|
bool ro;
|
|
int open_flags;
|
|
int ret;
|
|
|
|
/* find the top layer BDS of the chain */
|
|
bs = bdrv_find(device);
|
|
if (!bs) {
|
|
error_set(errp, QERR_DEVICE_NOT_FOUND, device);
|
|
return;
|
|
}
|
|
|
|
image_bs = bdrv_lookup_bs(NULL, image_node_name, &local_err);
|
|
if (local_err) {
|
|
error_propagate(errp, local_err);
|
|
return;
|
|
}
|
|
|
|
if (!image_bs) {
|
|
error_setg(errp, "image file not found");
|
|
return;
|
|
}
|
|
|
|
if (bdrv_find_base(image_bs) == image_bs) {
|
|
error_setg(errp, "not allowing backing file change on an image "
|
|
"without a backing file");
|
|
return;
|
|
}
|
|
|
|
/* even though we are not necessarily operating on bs, we need it to
|
|
* determine if block ops are currently prohibited on the chain */
|
|
if (bdrv_op_is_blocked(bs, BLOCK_OP_TYPE_CHANGE, errp)) {
|
|
return;
|
|
}
|
|
|
|
/* final sanity check */
|
|
if (!bdrv_chain_contains(bs, image_bs)) {
|
|
error_setg(errp, "'%s' and image file are not in the same chain",
|
|
device);
|
|
return;
|
|
}
|
|
|
|
/* if not r/w, reopen to make r/w */
|
|
open_flags = image_bs->open_flags;
|
|
ro = bdrv_is_read_only(image_bs);
|
|
|
|
if (ro) {
|
|
bdrv_reopen(image_bs, open_flags | BDRV_O_RDWR, &local_err);
|
|
if (local_err) {
|
|
error_propagate(errp, local_err);
|
|
return;
|
|
}
|
|
}
|
|
|
|
ret = bdrv_change_backing_file(image_bs, backing_file,
|
|
image_bs->drv ? image_bs->drv->format_name : "");
|
|
|
|
if (ret < 0) {
|
|
error_setg_errno(errp, -ret, "Could not change backing file to '%s'",
|
|
backing_file);
|
|
/* don't exit here, so we can try to restore open flags if
|
|
* appropriate */
|
|
}
|
|
|
|
if (ro) {
|
|
bdrv_reopen(image_bs, open_flags, &local_err);
|
|
if (local_err) {
|
|
error_propagate(errp, local_err); /* will preserve prior errp */
|
|
}
|
|
}
|
|
}
|
|
|
|
void qmp_blockdev_add(BlockdevOptions *options, Error **errp)
|
|
{
|
|
QmpOutputVisitor *ov = qmp_output_visitor_new();
|
|
DriveInfo *dinfo;
|
|
QObject *obj;
|
|
QDict *qdict;
|
|
Error *local_err = NULL;
|
|
|
|
/* Require an ID in the top level */
|
|
if (!options->has_id) {
|
|
error_setg(errp, "Block device needs an ID");
|
|
goto fail;
|
|
}
|
|
|
|
/* TODO Sort it out in raw-posix and drive_new(): Reject aio=native with
|
|
* cache.direct=false instead of silently switching to aio=threads, except
|
|
* when called from drive_new().
|
|
*
|
|
* For now, simply forbidding the combination for all drivers will do. */
|
|
if (options->has_aio && options->aio == BLOCKDEV_AIO_OPTIONS_NATIVE) {
|
|
bool direct = options->has_cache &&
|
|
options->cache->has_direct &&
|
|
options->cache->direct;
|
|
if (!direct) {
|
|
error_setg(errp, "aio=native requires cache.direct=true");
|
|
goto fail;
|
|
}
|
|
}
|
|
|
|
visit_type_BlockdevOptions(qmp_output_get_visitor(ov),
|
|
&options, NULL, &local_err);
|
|
if (local_err) {
|
|
error_propagate(errp, local_err);
|
|
goto fail;
|
|
}
|
|
|
|
obj = qmp_output_get_qobject(ov);
|
|
qdict = qobject_to_qdict(obj);
|
|
|
|
qdict_flatten(qdict);
|
|
|
|
dinfo = blockdev_init(NULL, qdict, &local_err);
|
|
if (local_err) {
|
|
error_propagate(errp, local_err);
|
|
goto fail;
|
|
}
|
|
|
|
if (bdrv_key_required(dinfo->bdrv)) {
|
|
drive_del(dinfo);
|
|
error_setg(errp, "blockdev-add doesn't support encrypted devices");
|
|
goto fail;
|
|
}
|
|
|
|
fail:
|
|
qmp_output_visitor_cleanup(ov);
|
|
}
|
|
|
|
static void do_qmp_query_block_jobs_one(void *opaque, BlockDriverState *bs)
|
|
{
|
|
BlockJobInfoList **prev = opaque;
|
|
BlockJob *job = bs->job;
|
|
|
|
if (job) {
|
|
BlockJobInfoList *elem = g_new0(BlockJobInfoList, 1);
|
|
elem->value = block_job_query(bs->job);
|
|
(*prev)->next = elem;
|
|
*prev = elem;
|
|
}
|
|
}
|
|
|
|
BlockJobInfoList *qmp_query_block_jobs(Error **errp)
|
|
{
|
|
/* Dummy is a fake list element for holding the head pointer */
|
|
BlockJobInfoList dummy = {};
|
|
BlockJobInfoList *prev = &dummy;
|
|
bdrv_iterate(do_qmp_query_block_jobs_one, &prev);
|
|
return dummy.next;
|
|
}
|
|
|
|
QemuOptsList qemu_common_drive_opts = {
|
|
.name = "drive",
|
|
.head = QTAILQ_HEAD_INITIALIZER(qemu_common_drive_opts.head),
|
|
.desc = {
|
|
{
|
|
.name = "snapshot",
|
|
.type = QEMU_OPT_BOOL,
|
|
.help = "enable/disable snapshot mode",
|
|
},{
|
|
.name = "discard",
|
|
.type = QEMU_OPT_STRING,
|
|
.help = "discard operation (ignore/off, unmap/on)",
|
|
},{
|
|
.name = "cache.writeback",
|
|
.type = QEMU_OPT_BOOL,
|
|
.help = "enables writeback mode for any caches",
|
|
},{
|
|
.name = "cache.direct",
|
|
.type = QEMU_OPT_BOOL,
|
|
.help = "enables use of O_DIRECT (bypass the host page cache)",
|
|
},{
|
|
.name = "cache.no-flush",
|
|
.type = QEMU_OPT_BOOL,
|
|
.help = "ignore any flush requests for the device",
|
|
},{
|
|
.name = "aio",
|
|
.type = QEMU_OPT_STRING,
|
|
.help = "host AIO implementation (threads, native)",
|
|
},{
|
|
.name = "format",
|
|
.type = QEMU_OPT_STRING,
|
|
.help = "disk format (raw, qcow2, ...)",
|
|
},{
|
|
.name = "rerror",
|
|
.type = QEMU_OPT_STRING,
|
|
.help = "read error action",
|
|
},{
|
|
.name = "werror",
|
|
.type = QEMU_OPT_STRING,
|
|
.help = "write error action",
|
|
},{
|
|
.name = "read-only",
|
|
.type = QEMU_OPT_BOOL,
|
|
.help = "open drive file as read-only",
|
|
},{
|
|
.name = "throttling.iops-total",
|
|
.type = QEMU_OPT_NUMBER,
|
|
.help = "limit total I/O operations per second",
|
|
},{
|
|
.name = "throttling.iops-read",
|
|
.type = QEMU_OPT_NUMBER,
|
|
.help = "limit read operations per second",
|
|
},{
|
|
.name = "throttling.iops-write",
|
|
.type = QEMU_OPT_NUMBER,
|
|
.help = "limit write operations per second",
|
|
},{
|
|
.name = "throttling.bps-total",
|
|
.type = QEMU_OPT_NUMBER,
|
|
.help = "limit total bytes per second",
|
|
},{
|
|
.name = "throttling.bps-read",
|
|
.type = QEMU_OPT_NUMBER,
|
|
.help = "limit read bytes per second",
|
|
},{
|
|
.name = "throttling.bps-write",
|
|
.type = QEMU_OPT_NUMBER,
|
|
.help = "limit write bytes per second",
|
|
},{
|
|
.name = "throttling.iops-total-max",
|
|
.type = QEMU_OPT_NUMBER,
|
|
.help = "I/O operations burst",
|
|
},{
|
|
.name = "throttling.iops-read-max",
|
|
.type = QEMU_OPT_NUMBER,
|
|
.help = "I/O operations read burst",
|
|
},{
|
|
.name = "throttling.iops-write-max",
|
|
.type = QEMU_OPT_NUMBER,
|
|
.help = "I/O operations write burst",
|
|
},{
|
|
.name = "throttling.bps-total-max",
|
|
.type = QEMU_OPT_NUMBER,
|
|
.help = "total bytes burst",
|
|
},{
|
|
.name = "throttling.bps-read-max",
|
|
.type = QEMU_OPT_NUMBER,
|
|
.help = "total bytes read burst",
|
|
},{
|
|
.name = "throttling.bps-write-max",
|
|
.type = QEMU_OPT_NUMBER,
|
|
.help = "total bytes write burst",
|
|
},{
|
|
.name = "throttling.iops-size",
|
|
.type = QEMU_OPT_NUMBER,
|
|
.help = "when limiting by iops max size of an I/O in bytes",
|
|
},{
|
|
.name = "copy-on-read",
|
|
.type = QEMU_OPT_BOOL,
|
|
.help = "copy read data from backing file into image file",
|
|
},{
|
|
.name = "detect-zeroes",
|
|
.type = QEMU_OPT_STRING,
|
|
.help = "try to optimize zero writes (off, on, unmap)",
|
|
},
|
|
{ /* end of list */ }
|
|
},
|
|
};
|
|
|
|
QemuOptsList qemu_drive_opts = {
|
|
.name = "drive",
|
|
.head = QTAILQ_HEAD_INITIALIZER(qemu_drive_opts.head),
|
|
.desc = {
|
|
/*
|
|
* no elements => accept any params
|
|
* validation will happen later
|
|
*/
|
|
{ /* end of list */ }
|
|
},
|
|
};
|