xemu-project/xemu
1
0
Fork 0
mirror of https://github.com/xemu-project/xemu.git synced 2024-11-24 03:59:52 +00:00
Code Issues Actions Packages Projects Releases Wiki Activity
48d7c97577
xemu/hw/display/pl110.c
Linus Walleij 24da047af0 pl110: Implement vertical compare/next base interrupts 
This implements rudimentary support for interrupt generation on the
PL110. I am working on a new DRI/KMS driver for Linux and since that
uses the blanking interrupt, we need something to fire here. Without
any interrupt support Linux waits for a while and then gives ugly
messages about the vblank not working in the console (it does not
hang perpetually or anything though, DRI is pretty forgiving).

I solved it for now by setting up a timer to fire at 60Hz and pull
the interrupts for "vertical compare" and "next memory base"
at this interval. This works fine and fires roughly the same number
of IRQs on QEMU as on the hardware and leaves the console clean
and nice.

People who want to create more accurate emulation can probably work
on top of this if need be. It is certainly closer to the hardware
behaviour than what we have today anyway.

Cc: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Message-id: 20180123225654.5764-1-linus.walleij@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
[PMM: folded long lines]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-01-25 11:45:30 +00:00

567 lines
14 KiB
C
Raw Blame History

/*
* Arm PrimeCell PL110 Color LCD Controller
*
* Copyright (c) 2005-2009 CodeSourcery.
* Written by Paul Brook
*
* This code is licensed under the GNU LGPL
*/
#include "qemu/osdep.h"
#include "hw/sysbus.h"
#include "ui/console.h"
#include "framebuffer.h"
#include "ui/pixel_ops.h"
#include "qemu/timer.h"
#include "qemu/log.h"
#define PL110_CR_EN 0x001
#define PL110_CR_BGR 0x100
#define PL110_CR_BEBO 0x200
#define PL110_CR_BEPO 0x400
#define PL110_CR_PWR 0x800
#define PL110_IE_NB 0x004
#define PL110_IE_VC 0x008
enum pl110_bppmode
{
BPP_1,
BPP_2,
BPP_4,
BPP_8,
BPP_16,
BPP_32,
BPP_16_565, /* PL111 only */
BPP_12 /* PL111 only */
};
/* The Versatile/PB uses a slightly modified PL110 controller. */
enum pl110_version
{
PL110,
PL110_VERSATILE,
PL111
};
#define TYPE_PL110 "pl110"
#define PL110(obj) OBJECT_CHECK(PL110State, (obj), TYPE_PL110)
typedef struct PL110State {
SysBusDevice parent_obj;
MemoryRegion iomem;
MemoryRegionSection fbsection;
QemuConsole *con;
QEMUTimer *vblank_timer;
int version;
uint32_t timing[4];
uint32_t cr;
uint32_t upbase;
uint32_t lpbase;
uint32_t int_status;
uint32_t int_mask;
int cols;
int rows;
enum pl110_bppmode bpp;
int invalidate;
uint32_t mux_ctrl;
uint32_t palette[256];
uint32_t raw_palette[128];
qemu_irq irq;
} PL110State;
static int vmstate_pl110_post_load(void *opaque, int version_id);
static const VMStateDescription vmstate_pl110 = {
.name = "pl110",
.version_id = 2,
.minimum_version_id = 1,
.post_load = vmstate_pl110_post_load,
.fields = (VMStateField[]) {
VMSTATE_INT32(version, PL110State),
VMSTATE_UINT32_ARRAY(timing, PL110State, 4),
VMSTATE_UINT32(cr, PL110State),
VMSTATE_UINT32(upbase, PL110State),
VMSTATE_UINT32(lpbase, PL110State),
VMSTATE_UINT32(int_status, PL110State),
VMSTATE_UINT32(int_mask, PL110State),
VMSTATE_INT32(cols, PL110State),
VMSTATE_INT32(rows, PL110State),
VMSTATE_UINT32(bpp, PL110State),
VMSTATE_INT32(invalidate, PL110State),
VMSTATE_UINT32_ARRAY(palette, PL110State, 256),
VMSTATE_UINT32_ARRAY(raw_palette, PL110State, 128),
VMSTATE_UINT32_V(mux_ctrl, PL110State, 2),
VMSTATE_END_OF_LIST()
}
};
static const unsigned char pl110_id[] =
{ 0x10, 0x11, 0x04, 0x00, 0x0d, 0xf0, 0x05, 0xb1 };
static const unsigned char pl111_id[] = {
0x11, 0x11, 0x24, 0x00, 0x0d, 0xf0, 0x05, 0xb1
};
/* Indexed by pl110_version */
static const unsigned char *idregs[] = {
pl110_id,
/* The ARM documentation (DDI0224C) says the CLCDC on the Versatile board
* has a different ID (0x93, 0x10, 0x04, 0x00, ...). However the hardware
* itself has the same ID values as a stock PL110, and guests (in
* particular Linux) rely on this. We emulate what the hardware does,
* rather than what the docs claim it ought to do.
*/
pl110_id,
pl111_id
};
#define BITS 8
#include "pl110_template.h"
#define BITS 15
#include "pl110_template.h"
#define BITS 16
#include "pl110_template.h"
#define BITS 24
#include "pl110_template.h"
#define BITS 32
#include "pl110_template.h"
static int pl110_enabled(PL110State *s)
{
return (s->cr & PL110_CR_EN) && (s->cr & PL110_CR_PWR);
}
static void pl110_update_display(void *opaque)
{
PL110State *s = (PL110State *)opaque;
SysBusDevice *sbd;
DisplaySurface *surface = qemu_console_surface(s->con);
drawfn* fntable;
drawfn fn;
int dest_width;
int src_width;
int bpp_offset;
int first;
int last;
if (!pl110_enabled(s)) {
return;
}
sbd = SYS_BUS_DEVICE(s);
switch (surface_bits_per_pixel(surface)) {
case 0:
return;
case 8:
fntable = pl110_draw_fn_8;
dest_width = 1;
break;
case 15:
fntable = pl110_draw_fn_15;
dest_width = 2;
break;
case 16:
fntable = pl110_draw_fn_16;
dest_width = 2;
break;
case 24:
fntable = pl110_draw_fn_24;
dest_width = 3;
break;
case 32:
fntable = pl110_draw_fn_32;
dest_width = 4;
break;
default:
fprintf(stderr, "pl110: Bad color depth\n");
exit(1);
}
if (s->cr & PL110_CR_BGR)
bpp_offset = 0;
else
bpp_offset = 24;
if ((s->version != PL111) && (s->bpp == BPP_16)) {
/* The PL110's native 16 bit mode is 5551; however
* most boards with a PL110 implement an external
* mux which allows bits to be reshuffled to give
* 565 format. The mux is typically controlled by
* an external system register.
* This is controlled by a GPIO input pin
* so boards can wire it up to their register.
*
* The PL111 straightforwardly implements both
* 5551 and 565 under control of the bpp field
* in the LCDControl register.
*/
switch (s->mux_ctrl) {
case 3: /* 565 BGR */
bpp_offset = (BPP_16_565 - BPP_16);
break;
case 1: /* 5551 */
break;
case 0: /* 888; also if we have loaded vmstate from an old version */
case 2: /* 565 RGB */
default:
/* treat as 565 but honour BGR bit */
bpp_offset += (BPP_16_565 - BPP_16);
break;
}
}
if (s->cr & PL110_CR_BEBO)
fn = fntable[s->bpp + 8 + bpp_offset];
else if (s->cr & PL110_CR_BEPO)
fn = fntable[s->bpp + 16 + bpp_offset];
else
fn = fntable[s->bpp + bpp_offset];
src_width = s->cols;
switch (s->bpp) {
case BPP_1:
src_width >>= 3;
break;
case BPP_2:
src_width >>= 2;
break;
case BPP_4:
src_width >>= 1;
break;
case BPP_8:
break;
case BPP_16:
case BPP_16_565:
case BPP_12:
src_width <<= 1;
break;
case BPP_32:
src_width <<= 2;
break;
}
dest_width *= s->cols;
first = 0;
if (s->invalidate) {
framebuffer_update_memory_section(&s->fbsection,
sysbus_address_space(sbd),
s->upbase,
s->rows, src_width);
}
framebuffer_update_display(surface, &s->fbsection,
s->cols, s->rows,
src_width, dest_width, 0,
s->invalidate,
fn, s->palette,
&first, &last);
if (first >= 0) {
dpy_gfx_update(s->con, 0, first, s->cols, last - first + 1);
}
s->invalidate = 0;
}
static void pl110_invalidate_display(void * opaque)
{
PL110State *s = (PL110State *)opaque;
s->invalidate = 1;
if (pl110_enabled(s)) {
qemu_console_resize(s->con, s->cols, s->rows);
}
}
static void pl110_update_palette(PL110State *s, int n)
{
DisplaySurface *surface = qemu_console_surface(s->con);
int i;
uint32_t raw;
unsigned int r, g, b;
raw = s->raw_palette[n];
n <<= 1;
for (i = 0; i < 2; i++) {
r = (raw & 0x1f) << 3;
raw >>= 5;
g = (raw & 0x1f) << 3;
raw >>= 5;
b = (raw & 0x1f) << 3;
/* The I bit is ignored. */
raw >>= 6;
switch (surface_bits_per_pixel(surface)) {
case 8:
s->palette[n] = rgb_to_pixel8(r, g, b);
break;
case 15:
s->palette[n] = rgb_to_pixel15(r, g, b);
break;
case 16:
s->palette[n] = rgb_to_pixel16(r, g, b);
break;
case 24:
case 32:
s->palette[n] = rgb_to_pixel32(r, g, b);
break;
}
n++;
}
}
static void pl110_resize(PL110State *s, int width, int height)
{
if (width != s->cols || height != s->rows) {
if (pl110_enabled(s)) {
qemu_console_resize(s->con, width, height);
}
}
s->cols = width;
s->rows = height;
}
/* Update interrupts. */
static void pl110_update(PL110State *s)
{
/* Raise IRQ if enabled and any status bit is 1 */
if (s->int_status & s->int_mask) {
qemu_irq_raise(s->irq);
} else {
qemu_irq_lower(s->irq);
}
}
static void pl110_vblank_interrupt(void *opaque)
{
PL110State *s = opaque;
/* Fire the vertical compare and next base IRQs and re-arm */
s->int_status |= (PL110_IE_NB | PL110_IE_VC);
timer_mod(s->vblank_timer,
qemu_clock_get_ns(QEMU_CLOCK_VIRTUAL) +
NANOSECONDS_PER_SECOND / 60);
pl110_update(s);
}
static uint64_t pl110_read(void *opaque, hwaddr offset,
unsigned size)
{
PL110State *s = (PL110State *)opaque;
if (offset >= 0xfe0 && offset < 0x1000) {
return idregs[s->version][(offset - 0xfe0) >> 2];
}
if (offset >= 0x200 && offset < 0x400) {
return s->raw_palette[(offset - 0x200) >> 2];
}
switch (offset >> 2) {
case 0: /* LCDTiming0 */
return s->timing[0];
case 1: /* LCDTiming1 */
return s->timing[1];
case 2: /* LCDTiming2 */
return s->timing[2];
case 3: /* LCDTiming3 */
return s->timing[3];
case 4: /* LCDUPBASE */
return s->upbase;
case 5: /* LCDLPBASE */
return s->lpbase;
case 6: /* LCDIMSC */
if (s->version != PL110) {
return s->cr;
}
return s->int_mask;
case 7: /* LCDControl */
if (s->version != PL110) {
return s->int_mask;
}
return s->cr;
case 8: /* LCDRIS */
return s->int_status;
case 9: /* LCDMIS */
return s->int_status & s->int_mask;
case 11: /* LCDUPCURR */
/* TODO: Implement vertical refresh. */
return s->upbase;
case 12: /* LCDLPCURR */
return s->lpbase;
default:
qemu_log_mask(LOG_GUEST_ERROR,
"pl110_read: Bad offset %x\n", (int)offset);
return 0;
}
}
static void pl110_write(void *opaque, hwaddr offset,
uint64_t val, unsigned size)
{
PL110State *s = (PL110State *)opaque;
int n;
/* For simplicity invalidate the display whenever a control register
is written to. */
s->invalidate = 1;
if (offset >= 0x200 && offset < 0x400) {
/* Palette. */
n = (offset - 0x200) >> 2;
s->raw_palette[(offset - 0x200) >> 2] = val;
pl110_update_palette(s, n);
return;
}
switch (offset >> 2) {
case 0: /* LCDTiming0 */
s->timing[0] = val;
n = ((val & 0xfc) + 4) * 4;
pl110_resize(s, n, s->rows);
break;
case 1: /* LCDTiming1 */
s->timing[1] = val;
n = (val & 0x3ff) + 1;
pl110_resize(s, s->cols, n);
break;
case 2: /* LCDTiming2 */
s->timing[2] = val;
break;
case 3: /* LCDTiming3 */
s->timing[3] = val;
break;
case 4: /* LCDUPBASE */
s->upbase = val;
break;
case 5: /* LCDLPBASE */
s->lpbase = val;
break;
case 6: /* LCDIMSC */
if (s->version != PL110) {
goto control;
}
imsc:
s->int_mask = val;
pl110_update(s);
break;
case 7: /* LCDControl */
if (s->version != PL110) {
goto imsc;
}
control:
s->cr = val;
s->bpp = (val >> 1) & 7;
if (pl110_enabled(s)) {
qemu_console_resize(s->con, s->cols, s->rows);
timer_mod(s->vblank_timer,
qemu_clock_get_ns(QEMU_CLOCK_VIRTUAL) +
NANOSECONDS_PER_SECOND / 60);
} else {
timer_del(s->vblank_timer);
}
break;
case 10: /* LCDICR */
s->int_status &= ~val;
pl110_update(s);
break;
default:
qemu_log_mask(LOG_GUEST_ERROR,
"pl110_write: Bad offset %x\n", (int)offset);
}
}
static const MemoryRegionOps pl110_ops = {
.read = pl110_read,
.write = pl110_write,
.endianness = DEVICE_NATIVE_ENDIAN,
};
static void pl110_mux_ctrl_set(void *opaque, int line, int level)
{
PL110State *s = (PL110State *)opaque;
s->mux_ctrl = level;
}
static int vmstate_pl110_post_load(void *opaque, int version_id)
{
PL110State *s = opaque;
/* Make sure we redraw, and at the right size */
pl110_invalidate_display(s);
return 0;
}
static const GraphicHwOps pl110_gfx_ops = {
.invalidate = pl110_invalidate_display,
.gfx_update = pl110_update_display,
};
static void pl110_realize(DeviceState *dev, Error **errp)
{
PL110State *s = PL110(dev);
SysBusDevice *sbd = SYS_BUS_DEVICE(dev);
memory_region_init_io(&s->iomem, OBJECT(s), &pl110_ops, s, "pl110", 0x1000);
sysbus_init_mmio(sbd, &s->iomem);
sysbus_init_irq(sbd, &s->irq);
s->vblank_timer = timer_new_ns(QEMU_CLOCK_VIRTUAL,
pl110_vblank_interrupt, s);
qdev_init_gpio_in(dev, pl110_mux_ctrl_set, 1);
s->con = graphic_console_init(dev, 0, &pl110_gfx_ops, s);
}
static void pl110_init(Object *obj)
{
PL110State *s = PL110(obj);
s->version = PL110;
}
static void pl110_versatile_init(Object *obj)
{
PL110State *s = PL110(obj);
s->version = PL110_VERSATILE;
}
static void pl111_init(Object *obj)
{
PL110State *s = PL110(obj);
s->version = PL111;
}
static void pl110_class_init(ObjectClass *klass, void *data)
{
DeviceClass *dc = DEVICE_CLASS(klass);
set_bit(DEVICE_CATEGORY_DISPLAY, dc->categories);
dc->vmsd = &vmstate_pl110;
dc->realize = pl110_realize;
}
static const TypeInfo pl110_info = {
.name = TYPE_PL110,
.parent = TYPE_SYS_BUS_DEVICE,
.instance_size = sizeof(PL110State),
.instance_init = pl110_init,
.class_init = pl110_class_init,
};
static const TypeInfo pl110_versatile_info = {
.name = "pl110_versatile",
.parent = TYPE_PL110,
.instance_init = pl110_versatile_init,
};
static const TypeInfo pl111_info = {
.name = "pl111",
.parent = TYPE_PL110,
.instance_init = pl111_init,
};
static void pl110_register_types(void)
{
type_register_static(&pl110_info);
type_register_static(&pl110_versatile_info);
type_register_static(&pl111_info);
}
type_init(pl110_register_types)
Reference in New Issue View Git Blame Copy Permalink