mirror of
https://github.com/xemu-project/xemu.git
synced 2024-11-28 22:10:33 +00:00
8b7cdba386
When opening an existing LUKS volume, if the iv generator is essiv, then the iv hash algorithm is mandatory to provide. We must report an error if it is omitted in the cipher mode spec, not silently default to hash 0 (md5). If the iv generator is not essiv, then we explicitly ignore any iv hash algorithm, rather than report an error, for compatibility with dm-crypt. When creating a new LUKS volume, if the iv generator is essiv and no iv hsah algorithm is provided, we should default to using the sha256 hash. Reported-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2121 lines
118 KiB
Plaintext
2121 lines
118 KiB
Plaintext
# ================= dm-crypt aes-256-xts-plain64-sha1 =================
|
|
# Create image
|
|
truncate TEST_DIR/luks-aes-256-xts-plain64-sha1.img --size 4194304MB
|
|
# Format image
|
|
sudo cryptsetup -q -v luksFormat --cipher aes-xts-plain64 --key-size 512 --hash sha1 --key-slot 0 --key-file - TEST_DIR/luks-aes-256-xts-plain64-sha1.img
|
|
# Open dev
|
|
sudo cryptsetup -q -v luksOpen TEST_DIR/luks-aes-256-xts-plain64-sha1.img qiotest-145-aes-256-xts-plain64-sha1
|
|
# Set dev owner
|
|
sudo chown UID:GID /dev/mapper/qiotest-145-aes-256-xts-plain64-sha1
|
|
# Write test pattern 0xa7
|
|
qemu-io -c write -P 0xa7 100M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-aes-256-xts-plain64-sha1
|
|
wrote 10485760/10485760 bytes at offset 104857600
|
|
10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
|
|
|
|
# Write test pattern 0x13
|
|
qemu-io -c write -P 0x13 3145728M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-aes-256-xts-plain64-sha1
|
|
wrote 10485760/10485760 bytes at offset 3298534883328
|
|
10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
|
|
|
|
# Close dev
|
|
sudo cryptsetup -q -v luksClose qiotest-145-aes-256-xts-plain64-sha1
|
|
# Read test pattern 0xa7
|
|
qemu-io -c read -P 0xa7 100M 10M --object secret,id=sec0,data=MTIzNDU2,format=base64 --image-opts driver=luks,key-secret=sec0,file.filename=TEST_DIR/luks-aes-256-xts-plain64-sha1.img
|
|
read 10485760/10485760 bytes at offset 104857600
|
|
10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
|
|
|
|
# Read test pattern 0x13
|
|
qemu-io -c read -P 0x13 3145728M 10M --object secret,id=sec0,data=MTIzNDU2,format=base64 --image-opts driver=luks,key-secret=sec0,file.filename=TEST_DIR/luks-aes-256-xts-plain64-sha1.img
|
|
read 10485760/10485760 bytes at offset 3298534883328
|
|
10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
|
|
|
|
# Write test pattern 0x91
|
|
qemu-io -c write -P 0x91 100M 10M --object secret,id=sec0,data=MTIzNDU2,format=base64 --image-opts driver=luks,key-secret=sec0,file.filename=TEST_DIR/luks-aes-256-xts-plain64-sha1.img
|
|
wrote 10485760/10485760 bytes at offset 104857600
|
|
10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
|
|
|
|
# Write test pattern 0x5e
|
|
qemu-io -c write -P 0x5e 3145728M 10M --object secret,id=sec0,data=MTIzNDU2,format=base64 --image-opts driver=luks,key-secret=sec0,file.filename=TEST_DIR/luks-aes-256-xts-plain64-sha1.img
|
|
wrote 10485760/10485760 bytes at offset 3298534883328
|
|
10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
|
|
|
|
# Open dev
|
|
sudo cryptsetup -q -v luksOpen TEST_DIR/luks-aes-256-xts-plain64-sha1.img qiotest-145-aes-256-xts-plain64-sha1
|
|
# Set dev owner
|
|
sudo chown UID:GID /dev/mapper/qiotest-145-aes-256-xts-plain64-sha1
|
|
# Read test pattern 0x91
|
|
qemu-io -c read -P 0x91 100M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-aes-256-xts-plain64-sha1
|
|
read 10485760/10485760 bytes at offset 104857600
|
|
10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
|
|
|
|
# Read test pattern 0x5e
|
|
qemu-io -c read -P 0x5e 3145728M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-aes-256-xts-plain64-sha1
|
|
read 10485760/10485760 bytes at offset 3298534883328
|
|
10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
|
|
|
|
# Close dev
|
|
sudo cryptsetup -q -v luksClose qiotest-145-aes-256-xts-plain64-sha1
|
|
# Delete image
|
|
unlink TEST_DIR/luks-aes-256-xts-plain64-sha1.img
|
|
|
|
# ================= qemu-img aes-256-xts-plain64-sha1 =================
|
|
# Create image
|
|
qemu-img create -f luks --object secret,id=sec0,data=MTIzNDU2,format=base64 -o key-secret=sec0,cipher-alg=aes-256,cipher-mode=xts,ivgen-alg=plain64,hash-alg=sha1 TEST_DIR/luks-aes-256-xts-plain64-sha1.img 4194304M
|
|
Formatting 'TEST_DIR/luks-aes-256-xts-plain64-sha1.img', fmt=luks size=4398046511104 key-secret=sec0 cipher-alg=aes-256 cipher-mode=xts ivgen-alg=plain64 hash-alg=sha1
|
|
|
|
# Open dev
|
|
sudo cryptsetup -q -v luksOpen TEST_DIR/luks-aes-256-xts-plain64-sha1.img qiotest-145-aes-256-xts-plain64-sha1
|
|
# Set dev owner
|
|
sudo chown UID:GID /dev/mapper/qiotest-145-aes-256-xts-plain64-sha1
|
|
# Write test pattern 0xa7
|
|
qemu-io -c write -P 0xa7 100M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-aes-256-xts-plain64-sha1
|
|
wrote 10485760/10485760 bytes at offset 104857600
|
|
10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
|
|
|
|
# Write test pattern 0x13
|
|
qemu-io -c write -P 0x13 3145728M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-aes-256-xts-plain64-sha1
|
|
wrote 10485760/10485760 bytes at offset 3298534883328
|
|
10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
|
|
|
|
# Close dev
|
|
sudo cryptsetup -q -v luksClose qiotest-145-aes-256-xts-plain64-sha1
|
|
# Read test pattern 0xa7
|
|
qemu-io -c read -P 0xa7 100M 10M --object secret,id=sec0,data=MTIzNDU2,format=base64 --image-opts driver=luks,key-secret=sec0,file.filename=TEST_DIR/luks-aes-256-xts-plain64-sha1.img
|
|
read 10485760/10485760 bytes at offset 104857600
|
|
10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
|
|
|
|
# Read test pattern 0x13
|
|
qemu-io -c read -P 0x13 3145728M 10M --object secret,id=sec0,data=MTIzNDU2,format=base64 --image-opts driver=luks,key-secret=sec0,file.filename=TEST_DIR/luks-aes-256-xts-plain64-sha1.img
|
|
read 10485760/10485760 bytes at offset 3298534883328
|
|
10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
|
|
|
|
# Write test pattern 0x91
|
|
qemu-io -c write -P 0x91 100M 10M --object secret,id=sec0,data=MTIzNDU2,format=base64 --image-opts driver=luks,key-secret=sec0,file.filename=TEST_DIR/luks-aes-256-xts-plain64-sha1.img
|
|
wrote 10485760/10485760 bytes at offset 104857600
|
|
10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
|
|
|
|
# Write test pattern 0x5e
|
|
qemu-io -c write -P 0x5e 3145728M 10M --object secret,id=sec0,data=MTIzNDU2,format=base64 --image-opts driver=luks,key-secret=sec0,file.filename=TEST_DIR/luks-aes-256-xts-plain64-sha1.img
|
|
wrote 10485760/10485760 bytes at offset 3298534883328
|
|
10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
|
|
|
|
# Open dev
|
|
sudo cryptsetup -q -v luksOpen TEST_DIR/luks-aes-256-xts-plain64-sha1.img qiotest-145-aes-256-xts-plain64-sha1
|
|
# Set dev owner
|
|
sudo chown UID:GID /dev/mapper/qiotest-145-aes-256-xts-plain64-sha1
|
|
# Read test pattern 0x91
|
|
qemu-io -c read -P 0x91 100M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-aes-256-xts-plain64-sha1
|
|
read 10485760/10485760 bytes at offset 104857600
|
|
10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
|
|
|
|
# Read test pattern 0x5e
|
|
qemu-io -c read -P 0x5e 3145728M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-aes-256-xts-plain64-sha1
|
|
read 10485760/10485760 bytes at offset 3298534883328
|
|
10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
|
|
|
|
# Close dev
|
|
sudo cryptsetup -q -v luksClose qiotest-145-aes-256-xts-plain64-sha1
|
|
# Delete image
|
|
unlink TEST_DIR/luks-aes-256-xts-plain64-sha1.img
|
|
|
|
# ================= dm-crypt twofish-256-xts-plain64-sha1 =================
|
|
# Create image
|
|
truncate TEST_DIR/luks-twofish-256-xts-plain64-sha1.img --size 4194304MB
|
|
# Format image
|
|
sudo cryptsetup -q -v luksFormat --cipher twofish-xts-plain64 --key-size 512 --hash sha1 --key-slot 0 --key-file - TEST_DIR/luks-twofish-256-xts-plain64-sha1.img
|
|
# Open dev
|
|
sudo cryptsetup -q -v luksOpen TEST_DIR/luks-twofish-256-xts-plain64-sha1.img qiotest-145-twofish-256-xts-plain64-sha1
|
|
# Set dev owner
|
|
sudo chown UID:GID /dev/mapper/qiotest-145-twofish-256-xts-plain64-sha1
|
|
# Write test pattern 0xa7
|
|
qemu-io -c write -P 0xa7 100M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-twofish-256-xts-plain64-sha1
|
|
wrote 10485760/10485760 bytes at offset 104857600
|
|
10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
|
|
|
|
# Write test pattern 0x13
|
|
qemu-io -c write -P 0x13 3145728M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-twofish-256-xts-plain64-sha1
|
|
wrote 10485760/10485760 bytes at offset 3298534883328
|
|
10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
|
|
|
|
# Close dev
|
|
sudo cryptsetup -q -v luksClose qiotest-145-twofish-256-xts-plain64-sha1
|
|
# Read test pattern 0xa7
|
|
qemu-io -c read -P 0xa7 100M 10M --object secret,id=sec0,data=MTIzNDU2,format=base64 --image-opts driver=luks,key-secret=sec0,file.filename=TEST_DIR/luks-twofish-256-xts-plain64-sha1.img
|
|
read 10485760/10485760 bytes at offset 104857600
|
|
10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
|
|
|
|
# Read test pattern 0x13
|
|
qemu-io -c read -P 0x13 3145728M 10M --object secret,id=sec0,data=MTIzNDU2,format=base64 --image-opts driver=luks,key-secret=sec0,file.filename=TEST_DIR/luks-twofish-256-xts-plain64-sha1.img
|
|
read 10485760/10485760 bytes at offset 3298534883328
|
|
10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
|
|
|
|
# Write test pattern 0x91
|
|
qemu-io -c write -P 0x91 100M 10M --object secret,id=sec0,data=MTIzNDU2,format=base64 --image-opts driver=luks,key-secret=sec0,file.filename=TEST_DIR/luks-twofish-256-xts-plain64-sha1.img
|
|
wrote 10485760/10485760 bytes at offset 104857600
|
|
10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
|
|
|
|
# Write test pattern 0x5e
|
|
qemu-io -c write -P 0x5e 3145728M 10M --object secret,id=sec0,data=MTIzNDU2,format=base64 --image-opts driver=luks,key-secret=sec0,file.filename=TEST_DIR/luks-twofish-256-xts-plain64-sha1.img
|
|
wrote 10485760/10485760 bytes at offset 3298534883328
|
|
10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
|
|
|
|
# Open dev
|
|
sudo cryptsetup -q -v luksOpen TEST_DIR/luks-twofish-256-xts-plain64-sha1.img qiotest-145-twofish-256-xts-plain64-sha1
|
|
# Set dev owner
|
|
sudo chown UID:GID /dev/mapper/qiotest-145-twofish-256-xts-plain64-sha1
|
|
# Read test pattern 0x91
|
|
qemu-io -c read -P 0x91 100M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-twofish-256-xts-plain64-sha1
|
|
read 10485760/10485760 bytes at offset 104857600
|
|
10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
|
|
|
|
# Read test pattern 0x5e
|
|
qemu-io -c read -P 0x5e 3145728M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-twofish-256-xts-plain64-sha1
|
|
read 10485760/10485760 bytes at offset 3298534883328
|
|
10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
|
|
|
|
# Close dev
|
|
sudo cryptsetup -q -v luksClose qiotest-145-twofish-256-xts-plain64-sha1
|
|
# Delete image
|
|
unlink TEST_DIR/luks-twofish-256-xts-plain64-sha1.img
|
|
|
|
# ================= qemu-img twofish-256-xts-plain64-sha1 =================
|
|
# Create image
|
|
qemu-img create -f luks --object secret,id=sec0,data=MTIzNDU2,format=base64 -o key-secret=sec0,cipher-alg=twofish-256,cipher-mode=xts,ivgen-alg=plain64,hash-alg=sha1 TEST_DIR/luks-twofish-256-xts-plain64-sha1.img 4194304M
|
|
Formatting 'TEST_DIR/luks-twofish-256-xts-plain64-sha1.img', fmt=luks size=4398046511104 key-secret=sec0 cipher-alg=twofish-256 cipher-mode=xts ivgen-alg=plain64 hash-alg=sha1
|
|
|
|
# Open dev
|
|
sudo cryptsetup -q -v luksOpen TEST_DIR/luks-twofish-256-xts-plain64-sha1.img qiotest-145-twofish-256-xts-plain64-sha1
|
|
# Set dev owner
|
|
sudo chown UID:GID /dev/mapper/qiotest-145-twofish-256-xts-plain64-sha1
|
|
# Write test pattern 0xa7
|
|
qemu-io -c write -P 0xa7 100M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-twofish-256-xts-plain64-sha1
|
|
wrote 10485760/10485760 bytes at offset 104857600
|
|
10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
|
|
|
|
# Write test pattern 0x13
|
|
qemu-io -c write -P 0x13 3145728M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-twofish-256-xts-plain64-sha1
|
|
wrote 10485760/10485760 bytes at offset 3298534883328
|
|
10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
|
|
|
|
# Close dev
|
|
sudo cryptsetup -q -v luksClose qiotest-145-twofish-256-xts-plain64-sha1
|
|
# Read test pattern 0xa7
|
|
qemu-io -c read -P 0xa7 100M 10M --object secret,id=sec0,data=MTIzNDU2,format=base64 --image-opts driver=luks,key-secret=sec0,file.filename=TEST_DIR/luks-twofish-256-xts-plain64-sha1.img
|
|
read 10485760/10485760 bytes at offset 104857600
|
|
10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
|
|
|
|
# Read test pattern 0x13
|
|
qemu-io -c read -P 0x13 3145728M 10M --object secret,id=sec0,data=MTIzNDU2,format=base64 --image-opts driver=luks,key-secret=sec0,file.filename=TEST_DIR/luks-twofish-256-xts-plain64-sha1.img
|
|
read 10485760/10485760 bytes at offset 3298534883328
|
|
10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
|
|
|
|
# Write test pattern 0x91
|
|
qemu-io -c write -P 0x91 100M 10M --object secret,id=sec0,data=MTIzNDU2,format=base64 --image-opts driver=luks,key-secret=sec0,file.filename=TEST_DIR/luks-twofish-256-xts-plain64-sha1.img
|
|
wrote 10485760/10485760 bytes at offset 104857600
|
|
10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
|
|
|
|
# Write test pattern 0x5e
|
|
qemu-io -c write -P 0x5e 3145728M 10M --object secret,id=sec0,data=MTIzNDU2,format=base64 --image-opts driver=luks,key-secret=sec0,file.filename=TEST_DIR/luks-twofish-256-xts-plain64-sha1.img
|
|
wrote 10485760/10485760 bytes at offset 3298534883328
|
|
10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
|
|
|
|
# Open dev
|
|
sudo cryptsetup -q -v luksOpen TEST_DIR/luks-twofish-256-xts-plain64-sha1.img qiotest-145-twofish-256-xts-plain64-sha1
|
|
# Set dev owner
|
|
sudo chown UID:GID /dev/mapper/qiotest-145-twofish-256-xts-plain64-sha1
|
|
# Read test pattern 0x91
|
|
qemu-io -c read -P 0x91 100M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-twofish-256-xts-plain64-sha1
|
|
read 10485760/10485760 bytes at offset 104857600
|
|
10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
|
|
|
|
# Read test pattern 0x5e
|
|
qemu-io -c read -P 0x5e 3145728M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-twofish-256-xts-plain64-sha1
|
|
read 10485760/10485760 bytes at offset 3298534883328
|
|
10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
|
|
|
|
# Close dev
|
|
sudo cryptsetup -q -v luksClose qiotest-145-twofish-256-xts-plain64-sha1
|
|
# Delete image
|
|
unlink TEST_DIR/luks-twofish-256-xts-plain64-sha1.img
|
|
|
|
# ================= dm-crypt serpent-256-xts-plain64-sha1 =================
|
|
# Create image
|
|
truncate TEST_DIR/luks-serpent-256-xts-plain64-sha1.img --size 4194304MB
|
|
# Format image
|
|
sudo cryptsetup -q -v luksFormat --cipher serpent-xts-plain64 --key-size 512 --hash sha1 --key-slot 0 --key-file - TEST_DIR/luks-serpent-256-xts-plain64-sha1.img
|
|
# Open dev
|
|
sudo cryptsetup -q -v luksOpen TEST_DIR/luks-serpent-256-xts-plain64-sha1.img qiotest-145-serpent-256-xts-plain64-sha1
|
|
# Set dev owner
|
|
sudo chown UID:GID /dev/mapper/qiotest-145-serpent-256-xts-plain64-sha1
|
|
# Write test pattern 0xa7
|
|
qemu-io -c write -P 0xa7 100M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-serpent-256-xts-plain64-sha1
|
|
wrote 10485760/10485760 bytes at offset 104857600
|
|
10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
|
|
|
|
# Write test pattern 0x13
|
|
qemu-io -c write -P 0x13 3145728M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-serpent-256-xts-plain64-sha1
|
|
wrote 10485760/10485760 bytes at offset 3298534883328
|
|
10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
|
|
|
|
# Close dev
|
|
sudo cryptsetup -q -v luksClose qiotest-145-serpent-256-xts-plain64-sha1
|
|
# Read test pattern 0xa7
|
|
qemu-io -c read -P 0xa7 100M 10M --object secret,id=sec0,data=MTIzNDU2,format=base64 --image-opts driver=luks,key-secret=sec0,file.filename=TEST_DIR/luks-serpent-256-xts-plain64-sha1.img
|
|
read 10485760/10485760 bytes at offset 104857600
|
|
10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
|
|
|
|
# Read test pattern 0x13
|
|
qemu-io -c read -P 0x13 3145728M 10M --object secret,id=sec0,data=MTIzNDU2,format=base64 --image-opts driver=luks,key-secret=sec0,file.filename=TEST_DIR/luks-serpent-256-xts-plain64-sha1.img
|
|
read 10485760/10485760 bytes at offset 3298534883328
|
|
10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
|
|
|
|
# Write test pattern 0x91
|
|
qemu-io -c write -P 0x91 100M 10M --object secret,id=sec0,data=MTIzNDU2,format=base64 --image-opts driver=luks,key-secret=sec0,file.filename=TEST_DIR/luks-serpent-256-xts-plain64-sha1.img
|
|
wrote 10485760/10485760 bytes at offset 104857600
|
|
10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
|
|
|
|
# Write test pattern 0x5e
|
|
qemu-io -c write -P 0x5e 3145728M 10M --object secret,id=sec0,data=MTIzNDU2,format=base64 --image-opts driver=luks,key-secret=sec0,file.filename=TEST_DIR/luks-serpent-256-xts-plain64-sha1.img
|
|
wrote 10485760/10485760 bytes at offset 3298534883328
|
|
10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
|
|
|
|
# Open dev
|
|
sudo cryptsetup -q -v luksOpen TEST_DIR/luks-serpent-256-xts-plain64-sha1.img qiotest-145-serpent-256-xts-plain64-sha1
|
|
# Set dev owner
|
|
sudo chown UID:GID /dev/mapper/qiotest-145-serpent-256-xts-plain64-sha1
|
|
# Read test pattern 0x91
|
|
qemu-io -c read -P 0x91 100M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-serpent-256-xts-plain64-sha1
|
|
read 10485760/10485760 bytes at offset 104857600
|
|
10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
|
|
|
|
# Read test pattern 0x5e
|
|
qemu-io -c read -P 0x5e 3145728M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-serpent-256-xts-plain64-sha1
|
|
read 10485760/10485760 bytes at offset 3298534883328
|
|
10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
|
|
|
|
# Close dev
|
|
sudo cryptsetup -q -v luksClose qiotest-145-serpent-256-xts-plain64-sha1
|
|
# Delete image
|
|
unlink TEST_DIR/luks-serpent-256-xts-plain64-sha1.img
|
|
|
|
# ================= qemu-img serpent-256-xts-plain64-sha1 =================
|
|
# Create image
|
|
qemu-img create -f luks --object secret,id=sec0,data=MTIzNDU2,format=base64 -o key-secret=sec0,cipher-alg=serpent-256,cipher-mode=xts,ivgen-alg=plain64,hash-alg=sha1 TEST_DIR/luks-serpent-256-xts-plain64-sha1.img 4194304M
|
|
Formatting 'TEST_DIR/luks-serpent-256-xts-plain64-sha1.img', fmt=luks size=4398046511104 key-secret=sec0 cipher-alg=serpent-256 cipher-mode=xts ivgen-alg=plain64 hash-alg=sha1
|
|
|
|
# Open dev
|
|
sudo cryptsetup -q -v luksOpen TEST_DIR/luks-serpent-256-xts-plain64-sha1.img qiotest-145-serpent-256-xts-plain64-sha1
|
|
# Set dev owner
|
|
sudo chown UID:GID /dev/mapper/qiotest-145-serpent-256-xts-plain64-sha1
|
|
# Write test pattern 0xa7
|
|
qemu-io -c write -P 0xa7 100M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-serpent-256-xts-plain64-sha1
|
|
wrote 10485760/10485760 bytes at offset 104857600
|
|
10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
|
|
|
|
# Write test pattern 0x13
|
|
qemu-io -c write -P 0x13 3145728M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-serpent-256-xts-plain64-sha1
|
|
wrote 10485760/10485760 bytes at offset 3298534883328
|
|
10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
|
|
|
|
# Close dev
|
|
sudo cryptsetup -q -v luksClose qiotest-145-serpent-256-xts-plain64-sha1
|
|
# Read test pattern 0xa7
|
|
qemu-io -c read -P 0xa7 100M 10M --object secret,id=sec0,data=MTIzNDU2,format=base64 --image-opts driver=luks,key-secret=sec0,file.filename=TEST_DIR/luks-serpent-256-xts-plain64-sha1.img
|
|
read 10485760/10485760 bytes at offset 104857600
|
|
10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
|
|
|
|
# Read test pattern 0x13
|
|
qemu-io -c read -P 0x13 3145728M 10M --object secret,id=sec0,data=MTIzNDU2,format=base64 --image-opts driver=luks,key-secret=sec0,file.filename=TEST_DIR/luks-serpent-256-xts-plain64-sha1.img
|
|
read 10485760/10485760 bytes at offset 3298534883328
|
|
10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
|
|
|
|
# Write test pattern 0x91
|
|
qemu-io -c write -P 0x91 100M 10M --object secret,id=sec0,data=MTIzNDU2,format=base64 --image-opts driver=luks,key-secret=sec0,file.filename=TEST_DIR/luks-serpent-256-xts-plain64-sha1.img
|
|
wrote 10485760/10485760 bytes at offset 104857600
|
|
10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
|
|
|
|
# Write test pattern 0x5e
|
|
qemu-io -c write -P 0x5e 3145728M 10M --object secret,id=sec0,data=MTIzNDU2,format=base64 --image-opts driver=luks,key-secret=sec0,file.filename=TEST_DIR/luks-serpent-256-xts-plain64-sha1.img
|
|
wrote 10485760/10485760 bytes at offset 3298534883328
|
|
10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
|
|
|
|
# Open dev
|
|
sudo cryptsetup -q -v luksOpen TEST_DIR/luks-serpent-256-xts-plain64-sha1.img qiotest-145-serpent-256-xts-plain64-sha1
|
|
# Set dev owner
|
|
sudo chown UID:GID /dev/mapper/qiotest-145-serpent-256-xts-plain64-sha1
|
|
# Read test pattern 0x91
|
|
qemu-io -c read -P 0x91 100M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-serpent-256-xts-plain64-sha1
|
|
read 10485760/10485760 bytes at offset 104857600
|
|
10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
|
|
|
|
# Read test pattern 0x5e
|
|
qemu-io -c read -P 0x5e 3145728M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-serpent-256-xts-plain64-sha1
|
|
read 10485760/10485760 bytes at offset 3298534883328
|
|
10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
|
|
|
|
# Close dev
|
|
sudo cryptsetup -q -v luksClose qiotest-145-serpent-256-xts-plain64-sha1
|
|
# Delete image
|
|
unlink TEST_DIR/luks-serpent-256-xts-plain64-sha1.img
|
|
|
|
# ================= dm-crypt cast5-128-cbc-plain64-sha1 =================
|
|
# Create image
|
|
truncate TEST_DIR/luks-cast5-128-cbc-plain64-sha1.img --size 4194304MB
|
|
# Format image
|
|
sudo cryptsetup -q -v luksFormat --cipher cast5-cbc-plain64 --key-size 128 --hash sha1 --key-slot 0 --key-file - TEST_DIR/luks-cast5-128-cbc-plain64-sha1.img
|
|
# Open dev
|
|
sudo cryptsetup -q -v luksOpen TEST_DIR/luks-cast5-128-cbc-plain64-sha1.img qiotest-145-cast5-128-cbc-plain64-sha1
|
|
# Set dev owner
|
|
sudo chown UID:GID /dev/mapper/qiotest-145-cast5-128-cbc-plain64-sha1
|
|
# Write test pattern 0xa7
|
|
qemu-io -c write -P 0xa7 100M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-cast5-128-cbc-plain64-sha1
|
|
wrote 10485760/10485760 bytes at offset 104857600
|
|
10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
|
|
|
|
# Write test pattern 0x13
|
|
qemu-io -c write -P 0x13 3145728M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-cast5-128-cbc-plain64-sha1
|
|
wrote 10485760/10485760 bytes at offset 3298534883328
|
|
10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
|
|
|
|
# Close dev
|
|
sudo cryptsetup -q -v luksClose qiotest-145-cast5-128-cbc-plain64-sha1
|
|
# Read test pattern 0xa7
|
|
qemu-io -c read -P 0xa7 100M 10M --object secret,id=sec0,data=MTIzNDU2,format=base64 --image-opts driver=luks,key-secret=sec0,file.filename=TEST_DIR/luks-cast5-128-cbc-plain64-sha1.img
|
|
read 10485760/10485760 bytes at offset 104857600
|
|
10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
|
|
|
|
# Read test pattern 0x13
|
|
qemu-io -c read -P 0x13 3145728M 10M --object secret,id=sec0,data=MTIzNDU2,format=base64 --image-opts driver=luks,key-secret=sec0,file.filename=TEST_DIR/luks-cast5-128-cbc-plain64-sha1.img
|
|
read 10485760/10485760 bytes at offset 3298534883328
|
|
10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
|
|
|
|
# Write test pattern 0x91
|
|
qemu-io -c write -P 0x91 100M 10M --object secret,id=sec0,data=MTIzNDU2,format=base64 --image-opts driver=luks,key-secret=sec0,file.filename=TEST_DIR/luks-cast5-128-cbc-plain64-sha1.img
|
|
wrote 10485760/10485760 bytes at offset 104857600
|
|
10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
|
|
|
|
# Write test pattern 0x5e
|
|
qemu-io -c write -P 0x5e 3145728M 10M --object secret,id=sec0,data=MTIzNDU2,format=base64 --image-opts driver=luks,key-secret=sec0,file.filename=TEST_DIR/luks-cast5-128-cbc-plain64-sha1.img
|
|
wrote 10485760/10485760 bytes at offset 3298534883328
|
|
10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
|
|
|
|
# Open dev
|
|
sudo cryptsetup -q -v luksOpen TEST_DIR/luks-cast5-128-cbc-plain64-sha1.img qiotest-145-cast5-128-cbc-plain64-sha1
|
|
# Set dev owner
|
|
sudo chown UID:GID /dev/mapper/qiotest-145-cast5-128-cbc-plain64-sha1
|
|
# Read test pattern 0x91
|
|
qemu-io -c read -P 0x91 100M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-cast5-128-cbc-plain64-sha1
|
|
read 10485760/10485760 bytes at offset 104857600
|
|
10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
|
|
|
|
# Read test pattern 0x5e
|
|
qemu-io -c read -P 0x5e 3145728M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-cast5-128-cbc-plain64-sha1
|
|
read 10485760/10485760 bytes at offset 3298534883328
|
|
10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
|
|
|
|
# Close dev
|
|
sudo cryptsetup -q -v luksClose qiotest-145-cast5-128-cbc-plain64-sha1
|
|
# Delete image
|
|
unlink TEST_DIR/luks-cast5-128-cbc-plain64-sha1.img
|
|
|
|
# ================= qemu-img cast5-128-cbc-plain64-sha1 =================
|
|
# Create image
|
|
qemu-img create -f luks --object secret,id=sec0,data=MTIzNDU2,format=base64 -o key-secret=sec0,cipher-alg=cast5-128,cipher-mode=cbc,ivgen-alg=plain64,hash-alg=sha1 TEST_DIR/luks-cast5-128-cbc-plain64-sha1.img 4194304M
|
|
Formatting 'TEST_DIR/luks-cast5-128-cbc-plain64-sha1.img', fmt=luks size=4398046511104 key-secret=sec0 cipher-alg=cast5-128 cipher-mode=cbc ivgen-alg=plain64 hash-alg=sha1
|
|
|
|
# Open dev
|
|
sudo cryptsetup -q -v luksOpen TEST_DIR/luks-cast5-128-cbc-plain64-sha1.img qiotest-145-cast5-128-cbc-plain64-sha1
|
|
# Set dev owner
|
|
sudo chown UID:GID /dev/mapper/qiotest-145-cast5-128-cbc-plain64-sha1
|
|
# Write test pattern 0xa7
|
|
qemu-io -c write -P 0xa7 100M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-cast5-128-cbc-plain64-sha1
|
|
wrote 10485760/10485760 bytes at offset 104857600
|
|
10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
|
|
|
|
# Write test pattern 0x13
|
|
qemu-io -c write -P 0x13 3145728M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-cast5-128-cbc-plain64-sha1
|
|
wrote 10485760/10485760 bytes at offset 3298534883328
|
|
10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
|
|
|
|
# Close dev
|
|
sudo cryptsetup -q -v luksClose qiotest-145-cast5-128-cbc-plain64-sha1
|
|
# Read test pattern 0xa7
|
|
qemu-io -c read -P 0xa7 100M 10M --object secret,id=sec0,data=MTIzNDU2,format=base64 --image-opts driver=luks,key-secret=sec0,file.filename=TEST_DIR/luks-cast5-128-cbc-plain64-sha1.img
|
|
read 10485760/10485760 bytes at offset 104857600
|
|
10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
|
|
|
|
# Read test pattern 0x13
|
|
qemu-io -c read -P 0x13 3145728M 10M --object secret,id=sec0,data=MTIzNDU2,format=base64 --image-opts driver=luks,key-secret=sec0,file.filename=TEST_DIR/luks-cast5-128-cbc-plain64-sha1.img
|
|
read 10485760/10485760 bytes at offset 3298534883328
|
|
10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
|
|
|
|
# Write test pattern 0x91
|
|
qemu-io -c write -P 0x91 100M 10M --object secret,id=sec0,data=MTIzNDU2,format=base64 --image-opts driver=luks,key-secret=sec0,file.filename=TEST_DIR/luks-cast5-128-cbc-plain64-sha1.img
|
|
wrote 10485760/10485760 bytes at offset 104857600
|
|
10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
|
|
|
|
# Write test pattern 0x5e
|
|
qemu-io -c write -P 0x5e 3145728M 10M --object secret,id=sec0,data=MTIzNDU2,format=base64 --image-opts driver=luks,key-secret=sec0,file.filename=TEST_DIR/luks-cast5-128-cbc-plain64-sha1.img
|
|
wrote 10485760/10485760 bytes at offset 3298534883328
|
|
10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
|
|
|
|
# Open dev
|
|
sudo cryptsetup -q -v luksOpen TEST_DIR/luks-cast5-128-cbc-plain64-sha1.img qiotest-145-cast5-128-cbc-plain64-sha1
|
|
# Set dev owner
|
|
sudo chown UID:GID /dev/mapper/qiotest-145-cast5-128-cbc-plain64-sha1
|
|
# Read test pattern 0x91
|
|
qemu-io -c read -P 0x91 100M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-cast5-128-cbc-plain64-sha1
|
|
read 10485760/10485760 bytes at offset 104857600
|
|
10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
|
|
|
|
# Read test pattern 0x5e
|
|
qemu-io -c read -P 0x5e 3145728M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-cast5-128-cbc-plain64-sha1
|
|
read 10485760/10485760 bytes at offset 3298534883328
|
|
10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
|
|
|
|
# Close dev
|
|
sudo cryptsetup -q -v luksClose qiotest-145-cast5-128-cbc-plain64-sha1
|
|
# Delete image
|
|
unlink TEST_DIR/luks-cast5-128-cbc-plain64-sha1.img
|
|
|
|
Skipping cast6-256-xts-plain64-sha1 in blacklist
|
|
# ================= dm-crypt aes-256-cbc-plain-sha1 =================
|
|
# Create image
|
|
truncate TEST_DIR/luks-aes-256-cbc-plain-sha1.img --size 4194304MB
|
|
# Format image
|
|
sudo cryptsetup -q -v luksFormat --cipher aes-cbc-plain --key-size 256 --hash sha1 --key-slot 0 --key-file - TEST_DIR/luks-aes-256-cbc-plain-sha1.img
|
|
# Open dev
|
|
sudo cryptsetup -q -v luksOpen TEST_DIR/luks-aes-256-cbc-plain-sha1.img qiotest-145-aes-256-cbc-plain-sha1
|
|
# Set dev owner
|
|
sudo chown UID:GID /dev/mapper/qiotest-145-aes-256-cbc-plain-sha1
|
|
# Write test pattern 0xa7
|
|
qemu-io -c write -P 0xa7 100M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-aes-256-cbc-plain-sha1
|
|
wrote 10485760/10485760 bytes at offset 104857600
|
|
10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
|
|
|
|
# Write test pattern 0x13
|
|
qemu-io -c write -P 0x13 3145728M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-aes-256-cbc-plain-sha1
|
|
wrote 10485760/10485760 bytes at offset 3298534883328
|
|
10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
|
|
|
|
# Close dev
|
|
sudo cryptsetup -q -v luksClose qiotest-145-aes-256-cbc-plain-sha1
|
|
# Read test pattern 0xa7
|
|
qemu-io -c read -P 0xa7 100M 10M --object secret,id=sec0,data=MTIzNDU2,format=base64 --image-opts driver=luks,key-secret=sec0,file.filename=TEST_DIR/luks-aes-256-cbc-plain-sha1.img
|
|
read 10485760/10485760 bytes at offset 104857600
|
|
10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
|
|
|
|
# Read test pattern 0x13
|
|
qemu-io -c read -P 0x13 3145728M 10M --object secret,id=sec0,data=MTIzNDU2,format=base64 --image-opts driver=luks,key-secret=sec0,file.filename=TEST_DIR/luks-aes-256-cbc-plain-sha1.img
|
|
read 10485760/10485760 bytes at offset 3298534883328
|
|
10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
|
|
|
|
# Write test pattern 0x91
|
|
qemu-io -c write -P 0x91 100M 10M --object secret,id=sec0,data=MTIzNDU2,format=base64 --image-opts driver=luks,key-secret=sec0,file.filename=TEST_DIR/luks-aes-256-cbc-plain-sha1.img
|
|
wrote 10485760/10485760 bytes at offset 104857600
|
|
10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
|
|
|
|
# Write test pattern 0x5e
|
|
qemu-io -c write -P 0x5e 3145728M 10M --object secret,id=sec0,data=MTIzNDU2,format=base64 --image-opts driver=luks,key-secret=sec0,file.filename=TEST_DIR/luks-aes-256-cbc-plain-sha1.img
|
|
wrote 10485760/10485760 bytes at offset 3298534883328
|
|
10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
|
|
|
|
# Open dev
|
|
sudo cryptsetup -q -v luksOpen TEST_DIR/luks-aes-256-cbc-plain-sha1.img qiotest-145-aes-256-cbc-plain-sha1
|
|
# Set dev owner
|
|
sudo chown UID:GID /dev/mapper/qiotest-145-aes-256-cbc-plain-sha1
|
|
# Read test pattern 0x91
|
|
qemu-io -c read -P 0x91 100M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-aes-256-cbc-plain-sha1
|
|
read 10485760/10485760 bytes at offset 104857600
|
|
10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
|
|
|
|
# Read test pattern 0x5e
|
|
qemu-io -c read -P 0x5e 3145728M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-aes-256-cbc-plain-sha1
|
|
read 10485760/10485760 bytes at offset 3298534883328
|
|
10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
|
|
|
|
# Close dev
|
|
sudo cryptsetup -q -v luksClose qiotest-145-aes-256-cbc-plain-sha1
|
|
# Delete image
|
|
unlink TEST_DIR/luks-aes-256-cbc-plain-sha1.img
|
|
|
|
# ================= qemu-img aes-256-cbc-plain-sha1 =================
|
|
# Create image
|
|
qemu-img create -f luks --object secret,id=sec0,data=MTIzNDU2,format=base64 -o key-secret=sec0,cipher-alg=aes-256,cipher-mode=cbc,ivgen-alg=plain,hash-alg=sha1 TEST_DIR/luks-aes-256-cbc-plain-sha1.img 4194304M
|
|
Formatting 'TEST_DIR/luks-aes-256-cbc-plain-sha1.img', fmt=luks size=4398046511104 key-secret=sec0 cipher-alg=aes-256 cipher-mode=cbc ivgen-alg=plain hash-alg=sha1
|
|
|
|
# Open dev
|
|
sudo cryptsetup -q -v luksOpen TEST_DIR/luks-aes-256-cbc-plain-sha1.img qiotest-145-aes-256-cbc-plain-sha1
|
|
# Set dev owner
|
|
sudo chown UID:GID /dev/mapper/qiotest-145-aes-256-cbc-plain-sha1
|
|
# Write test pattern 0xa7
|
|
qemu-io -c write -P 0xa7 100M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-aes-256-cbc-plain-sha1
|
|
wrote 10485760/10485760 bytes at offset 104857600
|
|
10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
|
|
|
|
# Write test pattern 0x13
|
|
qemu-io -c write -P 0x13 3145728M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-aes-256-cbc-plain-sha1
|
|
wrote 10485760/10485760 bytes at offset 3298534883328
|
|
10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
|
|
|
|
# Close dev
|
|
sudo cryptsetup -q -v luksClose qiotest-145-aes-256-cbc-plain-sha1
|
|
# Read test pattern 0xa7
|
|
qemu-io -c read -P 0xa7 100M 10M --object secret,id=sec0,data=MTIzNDU2,format=base64 --image-opts driver=luks,key-secret=sec0,file.filename=TEST_DIR/luks-aes-256-cbc-plain-sha1.img
|
|
read 10485760/10485760 bytes at offset 104857600
|
|
10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
|
|
|
|
# Read test pattern 0x13
|
|
qemu-io -c read -P 0x13 3145728M 10M --object secret,id=sec0,data=MTIzNDU2,format=base64 --image-opts driver=luks,key-secret=sec0,file.filename=TEST_DIR/luks-aes-256-cbc-plain-sha1.img
|
|
read 10485760/10485760 bytes at offset 3298534883328
|
|
10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
|
|
|
|
# Write test pattern 0x91
|
|
qemu-io -c write -P 0x91 100M 10M --object secret,id=sec0,data=MTIzNDU2,format=base64 --image-opts driver=luks,key-secret=sec0,file.filename=TEST_DIR/luks-aes-256-cbc-plain-sha1.img
|
|
wrote 10485760/10485760 bytes at offset 104857600
|
|
10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
|
|
|
|
# Write test pattern 0x5e
|
|
qemu-io -c write -P 0x5e 3145728M 10M --object secret,id=sec0,data=MTIzNDU2,format=base64 --image-opts driver=luks,key-secret=sec0,file.filename=TEST_DIR/luks-aes-256-cbc-plain-sha1.img
|
|
wrote 10485760/10485760 bytes at offset 3298534883328
|
|
10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
|
|
|
|
# Open dev
|
|
sudo cryptsetup -q -v luksOpen TEST_DIR/luks-aes-256-cbc-plain-sha1.img qiotest-145-aes-256-cbc-plain-sha1
|
|
# Set dev owner
|
|
sudo chown UID:GID /dev/mapper/qiotest-145-aes-256-cbc-plain-sha1
|
|
# Read test pattern 0x91
|
|
qemu-io -c read -P 0x91 100M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-aes-256-cbc-plain-sha1
|
|
read 10485760/10485760 bytes at offset 104857600
|
|
10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
|
|
|
|
# Read test pattern 0x5e
|
|
qemu-io -c read -P 0x5e 3145728M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-aes-256-cbc-plain-sha1
|
|
read 10485760/10485760 bytes at offset 3298534883328
|
|
10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
|
|
|
|
# Close dev
|
|
sudo cryptsetup -q -v luksClose qiotest-145-aes-256-cbc-plain-sha1
|
|
# Delete image
|
|
unlink TEST_DIR/luks-aes-256-cbc-plain-sha1.img
|
|
|
|
# ================= dm-crypt aes-256-cbc-plain64-sha1 =================
|
|
# Create image
|
|
truncate TEST_DIR/luks-aes-256-cbc-plain64-sha1.img --size 4194304MB
|
|
# Format image
|
|
sudo cryptsetup -q -v luksFormat --cipher aes-cbc-plain64 --key-size 256 --hash sha1 --key-slot 0 --key-file - TEST_DIR/luks-aes-256-cbc-plain64-sha1.img
|
|
# Open dev
|
|
sudo cryptsetup -q -v luksOpen TEST_DIR/luks-aes-256-cbc-plain64-sha1.img qiotest-145-aes-256-cbc-plain64-sha1
|
|
# Set dev owner
|
|
sudo chown UID:GID /dev/mapper/qiotest-145-aes-256-cbc-plain64-sha1
|
|
# Write test pattern 0xa7
|
|
qemu-io -c write -P 0xa7 100M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-aes-256-cbc-plain64-sha1
|
|
wrote 10485760/10485760 bytes at offset 104857600
|
|
10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
|
|
|
|
# Write test pattern 0x13
|
|
qemu-io -c write -P 0x13 3145728M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-aes-256-cbc-plain64-sha1
|
|
wrote 10485760/10485760 bytes at offset 3298534883328
|
|
10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
|
|
|
|
# Close dev
|
|
sudo cryptsetup -q -v luksClose qiotest-145-aes-256-cbc-plain64-sha1
|
|
# Read test pattern 0xa7
|
|
qemu-io -c read -P 0xa7 100M 10M --object secret,id=sec0,data=MTIzNDU2,format=base64 --image-opts driver=luks,key-secret=sec0,file.filename=TEST_DIR/luks-aes-256-cbc-plain64-sha1.img
|
|
read 10485760/10485760 bytes at offset 104857600
|
|
10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
|
|
|
|
# Read test pattern 0x13
|
|
qemu-io -c read -P 0x13 3145728M 10M --object secret,id=sec0,data=MTIzNDU2,format=base64 --image-opts driver=luks,key-secret=sec0,file.filename=TEST_DIR/luks-aes-256-cbc-plain64-sha1.img
|
|
read 10485760/10485760 bytes at offset 3298534883328
|
|
10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
|
|
|
|
# Write test pattern 0x91
|
|
qemu-io -c write -P 0x91 100M 10M --object secret,id=sec0,data=MTIzNDU2,format=base64 --image-opts driver=luks,key-secret=sec0,file.filename=TEST_DIR/luks-aes-256-cbc-plain64-sha1.img
|
|
wrote 10485760/10485760 bytes at offset 104857600
|
|
10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
|
|
|
|
# Write test pattern 0x5e
|
|
qemu-io -c write -P 0x5e 3145728M 10M --object secret,id=sec0,data=MTIzNDU2,format=base64 --image-opts driver=luks,key-secret=sec0,file.filename=TEST_DIR/luks-aes-256-cbc-plain64-sha1.img
|
|
wrote 10485760/10485760 bytes at offset 3298534883328
|
|
10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
|
|
|
|
# Open dev
|
|
sudo cryptsetup -q -v luksOpen TEST_DIR/luks-aes-256-cbc-plain64-sha1.img qiotest-145-aes-256-cbc-plain64-sha1
|
|
# Set dev owner
|
|
sudo chown UID:GID /dev/mapper/qiotest-145-aes-256-cbc-plain64-sha1
|
|
# Read test pattern 0x91
|
|
qemu-io -c read -P 0x91 100M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-aes-256-cbc-plain64-sha1
|
|
read 10485760/10485760 bytes at offset 104857600
|
|
10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
|
|
|
|
# Read test pattern 0x5e
|
|
qemu-io -c read -P 0x5e 3145728M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-aes-256-cbc-plain64-sha1
|
|
read 10485760/10485760 bytes at offset 3298534883328
|
|
10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
|
|
|
|
# Close dev
|
|
sudo cryptsetup -q -v luksClose qiotest-145-aes-256-cbc-plain64-sha1
|
|
# Delete image
|
|
unlink TEST_DIR/luks-aes-256-cbc-plain64-sha1.img
|
|
|
|
# ================= qemu-img aes-256-cbc-plain64-sha1 =================
|
|
# Create image
|
|
qemu-img create -f luks --object secret,id=sec0,data=MTIzNDU2,format=base64 -o key-secret=sec0,cipher-alg=aes-256,cipher-mode=cbc,ivgen-alg=plain64,hash-alg=sha1 TEST_DIR/luks-aes-256-cbc-plain64-sha1.img 4194304M
|
|
Formatting 'TEST_DIR/luks-aes-256-cbc-plain64-sha1.img', fmt=luks size=4398046511104 key-secret=sec0 cipher-alg=aes-256 cipher-mode=cbc ivgen-alg=plain64 hash-alg=sha1
|
|
|
|
# Open dev
|
|
sudo cryptsetup -q -v luksOpen TEST_DIR/luks-aes-256-cbc-plain64-sha1.img qiotest-145-aes-256-cbc-plain64-sha1
|
|
# Set dev owner
|
|
sudo chown UID:GID /dev/mapper/qiotest-145-aes-256-cbc-plain64-sha1
|
|
# Write test pattern 0xa7
|
|
qemu-io -c write -P 0xa7 100M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-aes-256-cbc-plain64-sha1
|
|
wrote 10485760/10485760 bytes at offset 104857600
|
|
10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
|
|
|
|
# Write test pattern 0x13
|
|
qemu-io -c write -P 0x13 3145728M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-aes-256-cbc-plain64-sha1
|
|
wrote 10485760/10485760 bytes at offset 3298534883328
|
|
10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
|
|
|
|
# Close dev
|
|
sudo cryptsetup -q -v luksClose qiotest-145-aes-256-cbc-plain64-sha1
|
|
# Read test pattern 0xa7
|
|
qemu-io -c read -P 0xa7 100M 10M --object secret,id=sec0,data=MTIzNDU2,format=base64 --image-opts driver=luks,key-secret=sec0,file.filename=TEST_DIR/luks-aes-256-cbc-plain64-sha1.img
|
|
read 10485760/10485760 bytes at offset 104857600
|
|
10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
|
|
|
|
# Read test pattern 0x13
|
|
qemu-io -c read -P 0x13 3145728M 10M --object secret,id=sec0,data=MTIzNDU2,format=base64 --image-opts driver=luks,key-secret=sec0,file.filename=TEST_DIR/luks-aes-256-cbc-plain64-sha1.img
|
|
read 10485760/10485760 bytes at offset 3298534883328
|
|
10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
|
|
|
|
# Write test pattern 0x91
|
|
qemu-io -c write -P 0x91 100M 10M --object secret,id=sec0,data=MTIzNDU2,format=base64 --image-opts driver=luks,key-secret=sec0,file.filename=TEST_DIR/luks-aes-256-cbc-plain64-sha1.img
|
|
wrote 10485760/10485760 bytes at offset 104857600
|
|
10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
|
|
|
|
# Write test pattern 0x5e
|
|
qemu-io -c write -P 0x5e 3145728M 10M --object secret,id=sec0,data=MTIzNDU2,format=base64 --image-opts driver=luks,key-secret=sec0,file.filename=TEST_DIR/luks-aes-256-cbc-plain64-sha1.img
|
|
wrote 10485760/10485760 bytes at offset 3298534883328
|
|
10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
|
|
|
|
# Open dev
|
|
sudo cryptsetup -q -v luksOpen TEST_DIR/luks-aes-256-cbc-plain64-sha1.img qiotest-145-aes-256-cbc-plain64-sha1
|
|
# Set dev owner
|
|
sudo chown UID:GID /dev/mapper/qiotest-145-aes-256-cbc-plain64-sha1
|
|
# Read test pattern 0x91
|
|
qemu-io -c read -P 0x91 100M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-aes-256-cbc-plain64-sha1
|
|
read 10485760/10485760 bytes at offset 104857600
|
|
10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
|
|
|
|
# Read test pattern 0x5e
|
|
qemu-io -c read -P 0x5e 3145728M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-aes-256-cbc-plain64-sha1
|
|
read 10485760/10485760 bytes at offset 3298534883328
|
|
10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
|
|
|
|
# Close dev
|
|
sudo cryptsetup -q -v luksClose qiotest-145-aes-256-cbc-plain64-sha1
|
|
# Delete image
|
|
unlink TEST_DIR/luks-aes-256-cbc-plain64-sha1.img
|
|
|
|
# ================= dm-crypt aes-256-cbc-essiv-sha256-sha1 =================
|
|
# Create image
|
|
truncate TEST_DIR/luks-aes-256-cbc-essiv-sha256-sha1.img --size 4194304MB
|
|
# Format image
|
|
sudo cryptsetup -q -v luksFormat --cipher aes-cbc-essiv:sha256 --key-size 256 --hash sha1 --key-slot 0 --key-file - TEST_DIR/luks-aes-256-cbc-essiv-sha256-sha1.img
|
|
# Open dev
|
|
sudo cryptsetup -q -v luksOpen TEST_DIR/luks-aes-256-cbc-essiv-sha256-sha1.img qiotest-145-aes-256-cbc-essiv-sha256-sha1
|
|
# Set dev owner
|
|
sudo chown UID:GID /dev/mapper/qiotest-145-aes-256-cbc-essiv-sha256-sha1
|
|
# Write test pattern 0xa7
|
|
qemu-io -c write -P 0xa7 100M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-aes-256-cbc-essiv-sha256-sha1
|
|
wrote 10485760/10485760 bytes at offset 104857600
|
|
10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
|
|
|
|
# Write test pattern 0x13
|
|
qemu-io -c write -P 0x13 3145728M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-aes-256-cbc-essiv-sha256-sha1
|
|
wrote 10485760/10485760 bytes at offset 3298534883328
|
|
10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
|
|
|
|
# Close dev
|
|
sudo cryptsetup -q -v luksClose qiotest-145-aes-256-cbc-essiv-sha256-sha1
|
|
# Read test pattern 0xa7
|
|
qemu-io -c read -P 0xa7 100M 10M --object secret,id=sec0,data=MTIzNDU2,format=base64 --image-opts driver=luks,key-secret=sec0,file.filename=TEST_DIR/luks-aes-256-cbc-essiv-sha256-sha1.img
|
|
read 10485760/10485760 bytes at offset 104857600
|
|
10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
|
|
|
|
# Read test pattern 0x13
|
|
qemu-io -c read -P 0x13 3145728M 10M --object secret,id=sec0,data=MTIzNDU2,format=base64 --image-opts driver=luks,key-secret=sec0,file.filename=TEST_DIR/luks-aes-256-cbc-essiv-sha256-sha1.img
|
|
read 10485760/10485760 bytes at offset 3298534883328
|
|
10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
|
|
|
|
# Write test pattern 0x91
|
|
qemu-io -c write -P 0x91 100M 10M --object secret,id=sec0,data=MTIzNDU2,format=base64 --image-opts driver=luks,key-secret=sec0,file.filename=TEST_DIR/luks-aes-256-cbc-essiv-sha256-sha1.img
|
|
wrote 10485760/10485760 bytes at offset 104857600
|
|
10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
|
|
|
|
# Write test pattern 0x5e
|
|
qemu-io -c write -P 0x5e 3145728M 10M --object secret,id=sec0,data=MTIzNDU2,format=base64 --image-opts driver=luks,key-secret=sec0,file.filename=TEST_DIR/luks-aes-256-cbc-essiv-sha256-sha1.img
|
|
wrote 10485760/10485760 bytes at offset 3298534883328
|
|
10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
|
|
|
|
# Open dev
|
|
sudo cryptsetup -q -v luksOpen TEST_DIR/luks-aes-256-cbc-essiv-sha256-sha1.img qiotest-145-aes-256-cbc-essiv-sha256-sha1
|
|
# Set dev owner
|
|
sudo chown UID:GID /dev/mapper/qiotest-145-aes-256-cbc-essiv-sha256-sha1
|
|
# Read test pattern 0x91
|
|
qemu-io -c read -P 0x91 100M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-aes-256-cbc-essiv-sha256-sha1
|
|
read 10485760/10485760 bytes at offset 104857600
|
|
10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
|
|
|
|
# Read test pattern 0x5e
|
|
qemu-io -c read -P 0x5e 3145728M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-aes-256-cbc-essiv-sha256-sha1
|
|
read 10485760/10485760 bytes at offset 3298534883328
|
|
10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
|
|
|
|
# Close dev
|
|
sudo cryptsetup -q -v luksClose qiotest-145-aes-256-cbc-essiv-sha256-sha1
|
|
# Delete image
|
|
unlink TEST_DIR/luks-aes-256-cbc-essiv-sha256-sha1.img
|
|
|
|
# ================= qemu-img aes-256-cbc-essiv-sha256-sha1 =================
|
|
# Create image
|
|
qemu-img create -f luks --object secret,id=sec0,data=MTIzNDU2,format=base64 -o key-secret=sec0,cipher-alg=aes-256,cipher-mode=cbc,ivgen-alg=essiv,hash-alg=sha1,ivgen-hash-alg=sha256 TEST_DIR/luks-aes-256-cbc-essiv-sha256-sha1.img 4194304M
|
|
Formatting 'TEST_DIR/luks-aes-256-cbc-essiv-sha256-sha1.img', fmt=luks size=4398046511104 key-secret=sec0 cipher-alg=aes-256 cipher-mode=cbc ivgen-alg=essiv ivgen-hash-alg=sha256 hash-alg=sha1
|
|
|
|
# Open dev
|
|
sudo cryptsetup -q -v luksOpen TEST_DIR/luks-aes-256-cbc-essiv-sha256-sha1.img qiotest-145-aes-256-cbc-essiv-sha256-sha1
|
|
# Set dev owner
|
|
sudo chown UID:GID /dev/mapper/qiotest-145-aes-256-cbc-essiv-sha256-sha1
|
|
# Write test pattern 0xa7
|
|
qemu-io -c write -P 0xa7 100M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-aes-256-cbc-essiv-sha256-sha1
|
|
wrote 10485760/10485760 bytes at offset 104857600
|
|
10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
|
|
|
|
# Write test pattern 0x13
|
|
qemu-io -c write -P 0x13 3145728M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-aes-256-cbc-essiv-sha256-sha1
|
|
wrote 10485760/10485760 bytes at offset 3298534883328
|
|
10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
|
|
|
|
# Close dev
|
|
sudo cryptsetup -q -v luksClose qiotest-145-aes-256-cbc-essiv-sha256-sha1
|
|
# Read test pattern 0xa7
|
|
qemu-io -c read -P 0xa7 100M 10M --object secret,id=sec0,data=MTIzNDU2,format=base64 --image-opts driver=luks,key-secret=sec0,file.filename=TEST_DIR/luks-aes-256-cbc-essiv-sha256-sha1.img
|
|
read 10485760/10485760 bytes at offset 104857600
|
|
10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
|
|
|
|
# Read test pattern 0x13
|
|
qemu-io -c read -P 0x13 3145728M 10M --object secret,id=sec0,data=MTIzNDU2,format=base64 --image-opts driver=luks,key-secret=sec0,file.filename=TEST_DIR/luks-aes-256-cbc-essiv-sha256-sha1.img
|
|
read 10485760/10485760 bytes at offset 3298534883328
|
|
10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
|
|
|
|
# Write test pattern 0x91
|
|
qemu-io -c write -P 0x91 100M 10M --object secret,id=sec0,data=MTIzNDU2,format=base64 --image-opts driver=luks,key-secret=sec0,file.filename=TEST_DIR/luks-aes-256-cbc-essiv-sha256-sha1.img
|
|
wrote 10485760/10485760 bytes at offset 104857600
|
|
10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
|
|
|
|
# Write test pattern 0x5e
|
|
qemu-io -c write -P 0x5e 3145728M 10M --object secret,id=sec0,data=MTIzNDU2,format=base64 --image-opts driver=luks,key-secret=sec0,file.filename=TEST_DIR/luks-aes-256-cbc-essiv-sha256-sha1.img
|
|
wrote 10485760/10485760 bytes at offset 3298534883328
|
|
10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
|
|
|
|
# Open dev
|
|
sudo cryptsetup -q -v luksOpen TEST_DIR/luks-aes-256-cbc-essiv-sha256-sha1.img qiotest-145-aes-256-cbc-essiv-sha256-sha1
|
|
# Set dev owner
|
|
sudo chown UID:GID /dev/mapper/qiotest-145-aes-256-cbc-essiv-sha256-sha1
|
|
# Read test pattern 0x91
|
|
qemu-io -c read -P 0x91 100M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-aes-256-cbc-essiv-sha256-sha1
|
|
read 10485760/10485760 bytes at offset 104857600
|
|
10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
|
|
|
|
# Read test pattern 0x5e
|
|
qemu-io -c read -P 0x5e 3145728M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-aes-256-cbc-essiv-sha256-sha1
|
|
read 10485760/10485760 bytes at offset 3298534883328
|
|
10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
|
|
|
|
# Close dev
|
|
sudo cryptsetup -q -v luksClose qiotest-145-aes-256-cbc-essiv-sha256-sha1
|
|
# Delete image
|
|
unlink TEST_DIR/luks-aes-256-cbc-essiv-sha256-sha1.img
|
|
|
|
# ================= dm-crypt aes-256-xts-essiv-sha256-sha1 =================
|
|
# Create image
|
|
truncate TEST_DIR/luks-aes-256-xts-essiv-sha256-sha1.img --size 4194304MB
|
|
# Format image
|
|
sudo cryptsetup -q -v luksFormat --cipher aes-xts-essiv:sha256 --key-size 512 --hash sha1 --key-slot 0 --key-file - TEST_DIR/luks-aes-256-xts-essiv-sha256-sha1.img
|
|
# Open dev
|
|
sudo cryptsetup -q -v luksOpen TEST_DIR/luks-aes-256-xts-essiv-sha256-sha1.img qiotest-145-aes-256-xts-essiv-sha256-sha1
|
|
# Set dev owner
|
|
sudo chown UID:GID /dev/mapper/qiotest-145-aes-256-xts-essiv-sha256-sha1
|
|
# Write test pattern 0xa7
|
|
qemu-io -c write -P 0xa7 100M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-aes-256-xts-essiv-sha256-sha1
|
|
wrote 10485760/10485760 bytes at offset 104857600
|
|
10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
|
|
|
|
# Write test pattern 0x13
|
|
qemu-io -c write -P 0x13 3145728M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-aes-256-xts-essiv-sha256-sha1
|
|
wrote 10485760/10485760 bytes at offset 3298534883328
|
|
10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
|
|
|
|
# Close dev
|
|
sudo cryptsetup -q -v luksClose qiotest-145-aes-256-xts-essiv-sha256-sha1
|
|
# Read test pattern 0xa7
|
|
qemu-io -c read -P 0xa7 100M 10M --object secret,id=sec0,data=MTIzNDU2,format=base64 --image-opts driver=luks,key-secret=sec0,file.filename=TEST_DIR/luks-aes-256-xts-essiv-sha256-sha1.img
|
|
read 10485760/10485760 bytes at offset 104857600
|
|
10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
|
|
|
|
# Read test pattern 0x13
|
|
qemu-io -c read -P 0x13 3145728M 10M --object secret,id=sec0,data=MTIzNDU2,format=base64 --image-opts driver=luks,key-secret=sec0,file.filename=TEST_DIR/luks-aes-256-xts-essiv-sha256-sha1.img
|
|
read 10485760/10485760 bytes at offset 3298534883328
|
|
10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
|
|
|
|
# Write test pattern 0x91
|
|
qemu-io -c write -P 0x91 100M 10M --object secret,id=sec0,data=MTIzNDU2,format=base64 --image-opts driver=luks,key-secret=sec0,file.filename=TEST_DIR/luks-aes-256-xts-essiv-sha256-sha1.img
|
|
wrote 10485760/10485760 bytes at offset 104857600
|
|
10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
|
|
|
|
# Write test pattern 0x5e
|
|
qemu-io -c write -P 0x5e 3145728M 10M --object secret,id=sec0,data=MTIzNDU2,format=base64 --image-opts driver=luks,key-secret=sec0,file.filename=TEST_DIR/luks-aes-256-xts-essiv-sha256-sha1.img
|
|
wrote 10485760/10485760 bytes at offset 3298534883328
|
|
10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
|
|
|
|
# Open dev
|
|
sudo cryptsetup -q -v luksOpen TEST_DIR/luks-aes-256-xts-essiv-sha256-sha1.img qiotest-145-aes-256-xts-essiv-sha256-sha1
|
|
# Set dev owner
|
|
sudo chown UID:GID /dev/mapper/qiotest-145-aes-256-xts-essiv-sha256-sha1
|
|
# Read test pattern 0x91
|
|
qemu-io -c read -P 0x91 100M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-aes-256-xts-essiv-sha256-sha1
|
|
read 10485760/10485760 bytes at offset 104857600
|
|
10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
|
|
|
|
# Read test pattern 0x5e
|
|
qemu-io -c read -P 0x5e 3145728M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-aes-256-xts-essiv-sha256-sha1
|
|
read 10485760/10485760 bytes at offset 3298534883328
|
|
10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
|
|
|
|
# Close dev
|
|
sudo cryptsetup -q -v luksClose qiotest-145-aes-256-xts-essiv-sha256-sha1
|
|
# Delete image
|
|
unlink TEST_DIR/luks-aes-256-xts-essiv-sha256-sha1.img
|
|
|
|
# ================= qemu-img aes-256-xts-essiv-sha256-sha1 =================
|
|
# Create image
|
|
qemu-img create -f luks --object secret,id=sec0,data=MTIzNDU2,format=base64 -o key-secret=sec0,cipher-alg=aes-256,cipher-mode=xts,ivgen-alg=essiv,hash-alg=sha1,ivgen-hash-alg=sha256 TEST_DIR/luks-aes-256-xts-essiv-sha256-sha1.img 4194304M
|
|
Formatting 'TEST_DIR/luks-aes-256-xts-essiv-sha256-sha1.img', fmt=luks size=4398046511104 key-secret=sec0 cipher-alg=aes-256 cipher-mode=xts ivgen-alg=essiv ivgen-hash-alg=sha256 hash-alg=sha1
|
|
|
|
# Open dev
|
|
sudo cryptsetup -q -v luksOpen TEST_DIR/luks-aes-256-xts-essiv-sha256-sha1.img qiotest-145-aes-256-xts-essiv-sha256-sha1
|
|
# Set dev owner
|
|
sudo chown UID:GID /dev/mapper/qiotest-145-aes-256-xts-essiv-sha256-sha1
|
|
# Write test pattern 0xa7
|
|
qemu-io -c write -P 0xa7 100M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-aes-256-xts-essiv-sha256-sha1
|
|
wrote 10485760/10485760 bytes at offset 104857600
|
|
10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
|
|
|
|
# Write test pattern 0x13
|
|
qemu-io -c write -P 0x13 3145728M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-aes-256-xts-essiv-sha256-sha1
|
|
wrote 10485760/10485760 bytes at offset 3298534883328
|
|
10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
|
|
|
|
# Close dev
|
|
sudo cryptsetup -q -v luksClose qiotest-145-aes-256-xts-essiv-sha256-sha1
|
|
# Read test pattern 0xa7
|
|
qemu-io -c read -P 0xa7 100M 10M --object secret,id=sec0,data=MTIzNDU2,format=base64 --image-opts driver=luks,key-secret=sec0,file.filename=TEST_DIR/luks-aes-256-xts-essiv-sha256-sha1.img
|
|
read 10485760/10485760 bytes at offset 104857600
|
|
10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
|
|
|
|
# Read test pattern 0x13
|
|
qemu-io -c read -P 0x13 3145728M 10M --object secret,id=sec0,data=MTIzNDU2,format=base64 --image-opts driver=luks,key-secret=sec0,file.filename=TEST_DIR/luks-aes-256-xts-essiv-sha256-sha1.img
|
|
read 10485760/10485760 bytes at offset 3298534883328
|
|
10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
|
|
|
|
# Write test pattern 0x91
|
|
qemu-io -c write -P 0x91 100M 10M --object secret,id=sec0,data=MTIzNDU2,format=base64 --image-opts driver=luks,key-secret=sec0,file.filename=TEST_DIR/luks-aes-256-xts-essiv-sha256-sha1.img
|
|
wrote 10485760/10485760 bytes at offset 104857600
|
|
10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
|
|
|
|
# Write test pattern 0x5e
|
|
qemu-io -c write -P 0x5e 3145728M 10M --object secret,id=sec0,data=MTIzNDU2,format=base64 --image-opts driver=luks,key-secret=sec0,file.filename=TEST_DIR/luks-aes-256-xts-essiv-sha256-sha1.img
|
|
wrote 10485760/10485760 bytes at offset 3298534883328
|
|
10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
|
|
|
|
# Open dev
|
|
sudo cryptsetup -q -v luksOpen TEST_DIR/luks-aes-256-xts-essiv-sha256-sha1.img qiotest-145-aes-256-xts-essiv-sha256-sha1
|
|
# Set dev owner
|
|
sudo chown UID:GID /dev/mapper/qiotest-145-aes-256-xts-essiv-sha256-sha1
|
|
# Read test pattern 0x91
|
|
qemu-io -c read -P 0x91 100M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-aes-256-xts-essiv-sha256-sha1
|
|
read 10485760/10485760 bytes at offset 104857600
|
|
10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
|
|
|
|
# Read test pattern 0x5e
|
|
qemu-io -c read -P 0x5e 3145728M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-aes-256-xts-essiv-sha256-sha1
|
|
read 10485760/10485760 bytes at offset 3298534883328
|
|
10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
|
|
|
|
# Close dev
|
|
sudo cryptsetup -q -v luksClose qiotest-145-aes-256-xts-essiv-sha256-sha1
|
|
# Delete image
|
|
unlink TEST_DIR/luks-aes-256-xts-essiv-sha256-sha1.img
|
|
|
|
# ================= dm-crypt aes-128-xts-plain64-sha256-sha1 =================
|
|
# Create image
|
|
truncate TEST_DIR/luks-aes-128-xts-plain64-sha256-sha1.img --size 4194304MB
|
|
# Format image
|
|
sudo cryptsetup -q -v luksFormat --cipher aes-xts-plain64 --key-size 256 --hash sha1 --key-slot 0 --key-file - TEST_DIR/luks-aes-128-xts-plain64-sha256-sha1.img
|
|
# Open dev
|
|
sudo cryptsetup -q -v luksOpen TEST_DIR/luks-aes-128-xts-plain64-sha256-sha1.img qiotest-145-aes-128-xts-plain64-sha256-sha1
|
|
# Set dev owner
|
|
sudo chown UID:GID /dev/mapper/qiotest-145-aes-128-xts-plain64-sha256-sha1
|
|
# Write test pattern 0xa7
|
|
qemu-io -c write -P 0xa7 100M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-aes-128-xts-plain64-sha256-sha1
|
|
wrote 10485760/10485760 bytes at offset 104857600
|
|
10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
|
|
|
|
# Write test pattern 0x13
|
|
qemu-io -c write -P 0x13 3145728M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-aes-128-xts-plain64-sha256-sha1
|
|
wrote 10485760/10485760 bytes at offset 3298534883328
|
|
10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
|
|
|
|
# Close dev
|
|
sudo cryptsetup -q -v luksClose qiotest-145-aes-128-xts-plain64-sha256-sha1
|
|
# Read test pattern 0xa7
|
|
qemu-io -c read -P 0xa7 100M 10M --object secret,id=sec0,data=MTIzNDU2,format=base64 --image-opts driver=luks,key-secret=sec0,file.filename=TEST_DIR/luks-aes-128-xts-plain64-sha256-sha1.img
|
|
read 10485760/10485760 bytes at offset 104857600
|
|
10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
|
|
|
|
# Read test pattern 0x13
|
|
qemu-io -c read -P 0x13 3145728M 10M --object secret,id=sec0,data=MTIzNDU2,format=base64 --image-opts driver=luks,key-secret=sec0,file.filename=TEST_DIR/luks-aes-128-xts-plain64-sha256-sha1.img
|
|
read 10485760/10485760 bytes at offset 3298534883328
|
|
10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
|
|
|
|
# Write test pattern 0x91
|
|
qemu-io -c write -P 0x91 100M 10M --object secret,id=sec0,data=MTIzNDU2,format=base64 --image-opts driver=luks,key-secret=sec0,file.filename=TEST_DIR/luks-aes-128-xts-plain64-sha256-sha1.img
|
|
wrote 10485760/10485760 bytes at offset 104857600
|
|
10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
|
|
|
|
# Write test pattern 0x5e
|
|
qemu-io -c write -P 0x5e 3145728M 10M --object secret,id=sec0,data=MTIzNDU2,format=base64 --image-opts driver=luks,key-secret=sec0,file.filename=TEST_DIR/luks-aes-128-xts-plain64-sha256-sha1.img
|
|
wrote 10485760/10485760 bytes at offset 3298534883328
|
|
10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
|
|
|
|
# Open dev
|
|
sudo cryptsetup -q -v luksOpen TEST_DIR/luks-aes-128-xts-plain64-sha256-sha1.img qiotest-145-aes-128-xts-plain64-sha256-sha1
|
|
# Set dev owner
|
|
sudo chown UID:GID /dev/mapper/qiotest-145-aes-128-xts-plain64-sha256-sha1
|
|
# Read test pattern 0x91
|
|
qemu-io -c read -P 0x91 100M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-aes-128-xts-plain64-sha256-sha1
|
|
read 10485760/10485760 bytes at offset 104857600
|
|
10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
|
|
|
|
# Read test pattern 0x5e
|
|
qemu-io -c read -P 0x5e 3145728M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-aes-128-xts-plain64-sha256-sha1
|
|
read 10485760/10485760 bytes at offset 3298534883328
|
|
10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
|
|
|
|
# Close dev
|
|
sudo cryptsetup -q -v luksClose qiotest-145-aes-128-xts-plain64-sha256-sha1
|
|
# Delete image
|
|
unlink TEST_DIR/luks-aes-128-xts-plain64-sha256-sha1.img
|
|
|
|
# ================= qemu-img aes-128-xts-plain64-sha256-sha1 =================
|
|
# Create image
|
|
qemu-img create -f luks --object secret,id=sec0,data=MTIzNDU2,format=base64 -o key-secret=sec0,cipher-alg=aes-128,cipher-mode=xts,ivgen-alg=plain64,hash-alg=sha1 TEST_DIR/luks-aes-128-xts-plain64-sha256-sha1.img 4194304M
|
|
Formatting 'TEST_DIR/luks-aes-128-xts-plain64-sha256-sha1.img', fmt=luks size=4398046511104 key-secret=sec0 cipher-alg=aes-128 cipher-mode=xts ivgen-alg=plain64 hash-alg=sha1
|
|
|
|
# Open dev
|
|
sudo cryptsetup -q -v luksOpen TEST_DIR/luks-aes-128-xts-plain64-sha256-sha1.img qiotest-145-aes-128-xts-plain64-sha256-sha1
|
|
# Set dev owner
|
|
sudo chown UID:GID /dev/mapper/qiotest-145-aes-128-xts-plain64-sha256-sha1
|
|
# Write test pattern 0xa7
|
|
qemu-io -c write -P 0xa7 100M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-aes-128-xts-plain64-sha256-sha1
|
|
wrote 10485760/10485760 bytes at offset 104857600
|
|
10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
|
|
|
|
# Write test pattern 0x13
|
|
qemu-io -c write -P 0x13 3145728M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-aes-128-xts-plain64-sha256-sha1
|
|
wrote 10485760/10485760 bytes at offset 3298534883328
|
|
10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
|
|
|
|
# Close dev
|
|
sudo cryptsetup -q -v luksClose qiotest-145-aes-128-xts-plain64-sha256-sha1
|
|
# Read test pattern 0xa7
|
|
qemu-io -c read -P 0xa7 100M 10M --object secret,id=sec0,data=MTIzNDU2,format=base64 --image-opts driver=luks,key-secret=sec0,file.filename=TEST_DIR/luks-aes-128-xts-plain64-sha256-sha1.img
|
|
read 10485760/10485760 bytes at offset 104857600
|
|
10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
|
|
|
|
# Read test pattern 0x13
|
|
qemu-io -c read -P 0x13 3145728M 10M --object secret,id=sec0,data=MTIzNDU2,format=base64 --image-opts driver=luks,key-secret=sec0,file.filename=TEST_DIR/luks-aes-128-xts-plain64-sha256-sha1.img
|
|
read 10485760/10485760 bytes at offset 3298534883328
|
|
10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
|
|
|
|
# Write test pattern 0x91
|
|
qemu-io -c write -P 0x91 100M 10M --object secret,id=sec0,data=MTIzNDU2,format=base64 --image-opts driver=luks,key-secret=sec0,file.filename=TEST_DIR/luks-aes-128-xts-plain64-sha256-sha1.img
|
|
wrote 10485760/10485760 bytes at offset 104857600
|
|
10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
|
|
|
|
# Write test pattern 0x5e
|
|
qemu-io -c write -P 0x5e 3145728M 10M --object secret,id=sec0,data=MTIzNDU2,format=base64 --image-opts driver=luks,key-secret=sec0,file.filename=TEST_DIR/luks-aes-128-xts-plain64-sha256-sha1.img
|
|
wrote 10485760/10485760 bytes at offset 3298534883328
|
|
10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
|
|
|
|
# Open dev
|
|
sudo cryptsetup -q -v luksOpen TEST_DIR/luks-aes-128-xts-plain64-sha256-sha1.img qiotest-145-aes-128-xts-plain64-sha256-sha1
|
|
# Set dev owner
|
|
sudo chown UID:GID /dev/mapper/qiotest-145-aes-128-xts-plain64-sha256-sha1
|
|
# Read test pattern 0x91
|
|
qemu-io -c read -P 0x91 100M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-aes-128-xts-plain64-sha256-sha1
|
|
read 10485760/10485760 bytes at offset 104857600
|
|
10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
|
|
|
|
# Read test pattern 0x5e
|
|
qemu-io -c read -P 0x5e 3145728M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-aes-128-xts-plain64-sha256-sha1
|
|
read 10485760/10485760 bytes at offset 3298534883328
|
|
10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
|
|
|
|
# Close dev
|
|
sudo cryptsetup -q -v luksClose qiotest-145-aes-128-xts-plain64-sha256-sha1
|
|
# Delete image
|
|
unlink TEST_DIR/luks-aes-128-xts-plain64-sha256-sha1.img
|
|
|
|
# ================= dm-crypt aes-192-xts-plain64-sha256-sha1 =================
|
|
# Create image
|
|
truncate TEST_DIR/luks-aes-192-xts-plain64-sha256-sha1.img --size 4194304MB
|
|
# Format image
|
|
sudo cryptsetup -q -v luksFormat --cipher aes-xts-plain64 --key-size 384 --hash sha1 --key-slot 0 --key-file - TEST_DIR/luks-aes-192-xts-plain64-sha256-sha1.img
|
|
# Open dev
|
|
sudo cryptsetup -q -v luksOpen TEST_DIR/luks-aes-192-xts-plain64-sha256-sha1.img qiotest-145-aes-192-xts-plain64-sha256-sha1
|
|
# Set dev owner
|
|
sudo chown UID:GID /dev/mapper/qiotest-145-aes-192-xts-plain64-sha256-sha1
|
|
# Write test pattern 0xa7
|
|
qemu-io -c write -P 0xa7 100M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-aes-192-xts-plain64-sha256-sha1
|
|
wrote 10485760/10485760 bytes at offset 104857600
|
|
10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
|
|
|
|
# Write test pattern 0x13
|
|
qemu-io -c write -P 0x13 3145728M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-aes-192-xts-plain64-sha256-sha1
|
|
wrote 10485760/10485760 bytes at offset 3298534883328
|
|
10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
|
|
|
|
# Close dev
|
|
sudo cryptsetup -q -v luksClose qiotest-145-aes-192-xts-plain64-sha256-sha1
|
|
# Read test pattern 0xa7
|
|
qemu-io -c read -P 0xa7 100M 10M --object secret,id=sec0,data=MTIzNDU2,format=base64 --image-opts driver=luks,key-secret=sec0,file.filename=TEST_DIR/luks-aes-192-xts-plain64-sha256-sha1.img
|
|
read 10485760/10485760 bytes at offset 104857600
|
|
10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
|
|
|
|
# Read test pattern 0x13
|
|
qemu-io -c read -P 0x13 3145728M 10M --object secret,id=sec0,data=MTIzNDU2,format=base64 --image-opts driver=luks,key-secret=sec0,file.filename=TEST_DIR/luks-aes-192-xts-plain64-sha256-sha1.img
|
|
read 10485760/10485760 bytes at offset 3298534883328
|
|
10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
|
|
|
|
# Write test pattern 0x91
|
|
qemu-io -c write -P 0x91 100M 10M --object secret,id=sec0,data=MTIzNDU2,format=base64 --image-opts driver=luks,key-secret=sec0,file.filename=TEST_DIR/luks-aes-192-xts-plain64-sha256-sha1.img
|
|
wrote 10485760/10485760 bytes at offset 104857600
|
|
10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
|
|
|
|
# Write test pattern 0x5e
|
|
qemu-io -c write -P 0x5e 3145728M 10M --object secret,id=sec0,data=MTIzNDU2,format=base64 --image-opts driver=luks,key-secret=sec0,file.filename=TEST_DIR/luks-aes-192-xts-plain64-sha256-sha1.img
|
|
wrote 10485760/10485760 bytes at offset 3298534883328
|
|
10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
|
|
|
|
# Open dev
|
|
sudo cryptsetup -q -v luksOpen TEST_DIR/luks-aes-192-xts-plain64-sha256-sha1.img qiotest-145-aes-192-xts-plain64-sha256-sha1
|
|
# Set dev owner
|
|
sudo chown UID:GID /dev/mapper/qiotest-145-aes-192-xts-plain64-sha256-sha1
|
|
# Read test pattern 0x91
|
|
qemu-io -c read -P 0x91 100M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-aes-192-xts-plain64-sha256-sha1
|
|
read 10485760/10485760 bytes at offset 104857600
|
|
10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
|
|
|
|
# Read test pattern 0x5e
|
|
qemu-io -c read -P 0x5e 3145728M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-aes-192-xts-plain64-sha256-sha1
|
|
read 10485760/10485760 bytes at offset 3298534883328
|
|
10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
|
|
|
|
# Close dev
|
|
sudo cryptsetup -q -v luksClose qiotest-145-aes-192-xts-plain64-sha256-sha1
|
|
# Delete image
|
|
unlink TEST_DIR/luks-aes-192-xts-plain64-sha256-sha1.img
|
|
|
|
# ================= qemu-img aes-192-xts-plain64-sha256-sha1 =================
|
|
# Create image
|
|
qemu-img create -f luks --object secret,id=sec0,data=MTIzNDU2,format=base64 -o key-secret=sec0,cipher-alg=aes-192,cipher-mode=xts,ivgen-alg=plain64,hash-alg=sha1 TEST_DIR/luks-aes-192-xts-plain64-sha256-sha1.img 4194304M
|
|
Formatting 'TEST_DIR/luks-aes-192-xts-plain64-sha256-sha1.img', fmt=luks size=4398046511104 key-secret=sec0 cipher-alg=aes-192 cipher-mode=xts ivgen-alg=plain64 hash-alg=sha1
|
|
|
|
# Open dev
|
|
sudo cryptsetup -q -v luksOpen TEST_DIR/luks-aes-192-xts-plain64-sha256-sha1.img qiotest-145-aes-192-xts-plain64-sha256-sha1
|
|
# Set dev owner
|
|
sudo chown UID:GID /dev/mapper/qiotest-145-aes-192-xts-plain64-sha256-sha1
|
|
# Write test pattern 0xa7
|
|
qemu-io -c write -P 0xa7 100M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-aes-192-xts-plain64-sha256-sha1
|
|
wrote 10485760/10485760 bytes at offset 104857600
|
|
10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
|
|
|
|
# Write test pattern 0x13
|
|
qemu-io -c write -P 0x13 3145728M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-aes-192-xts-plain64-sha256-sha1
|
|
wrote 10485760/10485760 bytes at offset 3298534883328
|
|
10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
|
|
|
|
# Close dev
|
|
sudo cryptsetup -q -v luksClose qiotest-145-aes-192-xts-plain64-sha256-sha1
|
|
# Read test pattern 0xa7
|
|
qemu-io -c read -P 0xa7 100M 10M --object secret,id=sec0,data=MTIzNDU2,format=base64 --image-opts driver=luks,key-secret=sec0,file.filename=TEST_DIR/luks-aes-192-xts-plain64-sha256-sha1.img
|
|
read 10485760/10485760 bytes at offset 104857600
|
|
10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
|
|
|
|
# Read test pattern 0x13
|
|
qemu-io -c read -P 0x13 3145728M 10M --object secret,id=sec0,data=MTIzNDU2,format=base64 --image-opts driver=luks,key-secret=sec0,file.filename=TEST_DIR/luks-aes-192-xts-plain64-sha256-sha1.img
|
|
read 10485760/10485760 bytes at offset 3298534883328
|
|
10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
|
|
|
|
# Write test pattern 0x91
|
|
qemu-io -c write -P 0x91 100M 10M --object secret,id=sec0,data=MTIzNDU2,format=base64 --image-opts driver=luks,key-secret=sec0,file.filename=TEST_DIR/luks-aes-192-xts-plain64-sha256-sha1.img
|
|
wrote 10485760/10485760 bytes at offset 104857600
|
|
10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
|
|
|
|
# Write test pattern 0x5e
|
|
qemu-io -c write -P 0x5e 3145728M 10M --object secret,id=sec0,data=MTIzNDU2,format=base64 --image-opts driver=luks,key-secret=sec0,file.filename=TEST_DIR/luks-aes-192-xts-plain64-sha256-sha1.img
|
|
wrote 10485760/10485760 bytes at offset 3298534883328
|
|
10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
|
|
|
|
# Open dev
|
|
sudo cryptsetup -q -v luksOpen TEST_DIR/luks-aes-192-xts-plain64-sha256-sha1.img qiotest-145-aes-192-xts-plain64-sha256-sha1
|
|
# Set dev owner
|
|
sudo chown UID:GID /dev/mapper/qiotest-145-aes-192-xts-plain64-sha256-sha1
|
|
# Read test pattern 0x91
|
|
qemu-io -c read -P 0x91 100M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-aes-192-xts-plain64-sha256-sha1
|
|
read 10485760/10485760 bytes at offset 104857600
|
|
10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
|
|
|
|
# Read test pattern 0x5e
|
|
qemu-io -c read -P 0x5e 3145728M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-aes-192-xts-plain64-sha256-sha1
|
|
read 10485760/10485760 bytes at offset 3298534883328
|
|
10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
|
|
|
|
# Close dev
|
|
sudo cryptsetup -q -v luksClose qiotest-145-aes-192-xts-plain64-sha256-sha1
|
|
# Delete image
|
|
unlink TEST_DIR/luks-aes-192-xts-plain64-sha256-sha1.img
|
|
|
|
# ================= dm-crypt twofish-128-xts-plain64-sha1 =================
|
|
# Create image
|
|
truncate TEST_DIR/luks-twofish-128-xts-plain64-sha1.img --size 4194304MB
|
|
# Format image
|
|
sudo cryptsetup -q -v luksFormat --cipher twofish-xts-plain64 --key-size 256 --hash sha1 --key-slot 0 --key-file - TEST_DIR/luks-twofish-128-xts-plain64-sha1.img
|
|
# Open dev
|
|
sudo cryptsetup -q -v luksOpen TEST_DIR/luks-twofish-128-xts-plain64-sha1.img qiotest-145-twofish-128-xts-plain64-sha1
|
|
# Set dev owner
|
|
sudo chown UID:GID /dev/mapper/qiotest-145-twofish-128-xts-plain64-sha1
|
|
# Write test pattern 0xa7
|
|
qemu-io -c write -P 0xa7 100M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-twofish-128-xts-plain64-sha1
|
|
wrote 10485760/10485760 bytes at offset 104857600
|
|
10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
|
|
|
|
# Write test pattern 0x13
|
|
qemu-io -c write -P 0x13 3145728M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-twofish-128-xts-plain64-sha1
|
|
wrote 10485760/10485760 bytes at offset 3298534883328
|
|
10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
|
|
|
|
# Close dev
|
|
sudo cryptsetup -q -v luksClose qiotest-145-twofish-128-xts-plain64-sha1
|
|
# Read test pattern 0xa7
|
|
qemu-io -c read -P 0xa7 100M 10M --object secret,id=sec0,data=MTIzNDU2,format=base64 --image-opts driver=luks,key-secret=sec0,file.filename=TEST_DIR/luks-twofish-128-xts-plain64-sha1.img
|
|
read 10485760/10485760 bytes at offset 104857600
|
|
10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
|
|
|
|
# Read test pattern 0x13
|
|
qemu-io -c read -P 0x13 3145728M 10M --object secret,id=sec0,data=MTIzNDU2,format=base64 --image-opts driver=luks,key-secret=sec0,file.filename=TEST_DIR/luks-twofish-128-xts-plain64-sha1.img
|
|
read 10485760/10485760 bytes at offset 3298534883328
|
|
10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
|
|
|
|
# Write test pattern 0x91
|
|
qemu-io -c write -P 0x91 100M 10M --object secret,id=sec0,data=MTIzNDU2,format=base64 --image-opts driver=luks,key-secret=sec0,file.filename=TEST_DIR/luks-twofish-128-xts-plain64-sha1.img
|
|
wrote 10485760/10485760 bytes at offset 104857600
|
|
10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
|
|
|
|
# Write test pattern 0x5e
|
|
qemu-io -c write -P 0x5e 3145728M 10M --object secret,id=sec0,data=MTIzNDU2,format=base64 --image-opts driver=luks,key-secret=sec0,file.filename=TEST_DIR/luks-twofish-128-xts-plain64-sha1.img
|
|
wrote 10485760/10485760 bytes at offset 3298534883328
|
|
10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
|
|
|
|
# Open dev
|
|
sudo cryptsetup -q -v luksOpen TEST_DIR/luks-twofish-128-xts-plain64-sha1.img qiotest-145-twofish-128-xts-plain64-sha1
|
|
# Set dev owner
|
|
sudo chown UID:GID /dev/mapper/qiotest-145-twofish-128-xts-plain64-sha1
|
|
# Read test pattern 0x91
|
|
qemu-io -c read -P 0x91 100M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-twofish-128-xts-plain64-sha1
|
|
read 10485760/10485760 bytes at offset 104857600
|
|
10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
|
|
|
|
# Read test pattern 0x5e
|
|
qemu-io -c read -P 0x5e 3145728M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-twofish-128-xts-plain64-sha1
|
|
read 10485760/10485760 bytes at offset 3298534883328
|
|
10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
|
|
|
|
# Close dev
|
|
sudo cryptsetup -q -v luksClose qiotest-145-twofish-128-xts-plain64-sha1
|
|
# Delete image
|
|
unlink TEST_DIR/luks-twofish-128-xts-plain64-sha1.img
|
|
|
|
# ================= qemu-img twofish-128-xts-plain64-sha1 =================
|
|
# Create image
|
|
qemu-img create -f luks --object secret,id=sec0,data=MTIzNDU2,format=base64 -o key-secret=sec0,cipher-alg=twofish-128,cipher-mode=xts,ivgen-alg=plain64,hash-alg=sha1 TEST_DIR/luks-twofish-128-xts-plain64-sha1.img 4194304M
|
|
Formatting 'TEST_DIR/luks-twofish-128-xts-plain64-sha1.img', fmt=luks size=4398046511104 key-secret=sec0 cipher-alg=twofish-128 cipher-mode=xts ivgen-alg=plain64 hash-alg=sha1
|
|
|
|
# Open dev
|
|
sudo cryptsetup -q -v luksOpen TEST_DIR/luks-twofish-128-xts-plain64-sha1.img qiotest-145-twofish-128-xts-plain64-sha1
|
|
# Set dev owner
|
|
sudo chown UID:GID /dev/mapper/qiotest-145-twofish-128-xts-plain64-sha1
|
|
# Write test pattern 0xa7
|
|
qemu-io -c write -P 0xa7 100M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-twofish-128-xts-plain64-sha1
|
|
wrote 10485760/10485760 bytes at offset 104857600
|
|
10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
|
|
|
|
# Write test pattern 0x13
|
|
qemu-io -c write -P 0x13 3145728M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-twofish-128-xts-plain64-sha1
|
|
wrote 10485760/10485760 bytes at offset 3298534883328
|
|
10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
|
|
|
|
# Close dev
|
|
sudo cryptsetup -q -v luksClose qiotest-145-twofish-128-xts-plain64-sha1
|
|
# Read test pattern 0xa7
|
|
qemu-io -c read -P 0xa7 100M 10M --object secret,id=sec0,data=MTIzNDU2,format=base64 --image-opts driver=luks,key-secret=sec0,file.filename=TEST_DIR/luks-twofish-128-xts-plain64-sha1.img
|
|
read 10485760/10485760 bytes at offset 104857600
|
|
10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
|
|
|
|
# Read test pattern 0x13
|
|
qemu-io -c read -P 0x13 3145728M 10M --object secret,id=sec0,data=MTIzNDU2,format=base64 --image-opts driver=luks,key-secret=sec0,file.filename=TEST_DIR/luks-twofish-128-xts-plain64-sha1.img
|
|
read 10485760/10485760 bytes at offset 3298534883328
|
|
10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
|
|
|
|
# Write test pattern 0x91
|
|
qemu-io -c write -P 0x91 100M 10M --object secret,id=sec0,data=MTIzNDU2,format=base64 --image-opts driver=luks,key-secret=sec0,file.filename=TEST_DIR/luks-twofish-128-xts-plain64-sha1.img
|
|
wrote 10485760/10485760 bytes at offset 104857600
|
|
10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
|
|
|
|
# Write test pattern 0x5e
|
|
qemu-io -c write -P 0x5e 3145728M 10M --object secret,id=sec0,data=MTIzNDU2,format=base64 --image-opts driver=luks,key-secret=sec0,file.filename=TEST_DIR/luks-twofish-128-xts-plain64-sha1.img
|
|
wrote 10485760/10485760 bytes at offset 3298534883328
|
|
10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
|
|
|
|
# Open dev
|
|
sudo cryptsetup -q -v luksOpen TEST_DIR/luks-twofish-128-xts-plain64-sha1.img qiotest-145-twofish-128-xts-plain64-sha1
|
|
# Set dev owner
|
|
sudo chown UID:GID /dev/mapper/qiotest-145-twofish-128-xts-plain64-sha1
|
|
# Read test pattern 0x91
|
|
qemu-io -c read -P 0x91 100M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-twofish-128-xts-plain64-sha1
|
|
read 10485760/10485760 bytes at offset 104857600
|
|
10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
|
|
|
|
# Read test pattern 0x5e
|
|
qemu-io -c read -P 0x5e 3145728M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-twofish-128-xts-plain64-sha1
|
|
read 10485760/10485760 bytes at offset 3298534883328
|
|
10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
|
|
|
|
# Close dev
|
|
sudo cryptsetup -q -v luksClose qiotest-145-twofish-128-xts-plain64-sha1
|
|
# Delete image
|
|
unlink TEST_DIR/luks-twofish-128-xts-plain64-sha1.img
|
|
|
|
Skipping twofish-192-xts-plain64-sha1 in blacklist
|
|
# ================= dm-crypt serpent-128-xts-plain64-sha1 =================
|
|
# Create image
|
|
truncate TEST_DIR/luks-serpent-128-xts-plain64-sha1.img --size 4194304MB
|
|
# Format image
|
|
sudo cryptsetup -q -v luksFormat --cipher serpent-xts-plain64 --key-size 256 --hash sha1 --key-slot 0 --key-file - TEST_DIR/luks-serpent-128-xts-plain64-sha1.img
|
|
# Open dev
|
|
sudo cryptsetup -q -v luksOpen TEST_DIR/luks-serpent-128-xts-plain64-sha1.img qiotest-145-serpent-128-xts-plain64-sha1
|
|
# Set dev owner
|
|
sudo chown UID:GID /dev/mapper/qiotest-145-serpent-128-xts-plain64-sha1
|
|
# Write test pattern 0xa7
|
|
qemu-io -c write -P 0xa7 100M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-serpent-128-xts-plain64-sha1
|
|
wrote 10485760/10485760 bytes at offset 104857600
|
|
10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
|
|
|
|
# Write test pattern 0x13
|
|
qemu-io -c write -P 0x13 3145728M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-serpent-128-xts-plain64-sha1
|
|
wrote 10485760/10485760 bytes at offset 3298534883328
|
|
10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
|
|
|
|
# Close dev
|
|
sudo cryptsetup -q -v luksClose qiotest-145-serpent-128-xts-plain64-sha1
|
|
# Read test pattern 0xa7
|
|
qemu-io -c read -P 0xa7 100M 10M --object secret,id=sec0,data=MTIzNDU2,format=base64 --image-opts driver=luks,key-secret=sec0,file.filename=TEST_DIR/luks-serpent-128-xts-plain64-sha1.img
|
|
read 10485760/10485760 bytes at offset 104857600
|
|
10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
|
|
|
|
# Read test pattern 0x13
|
|
qemu-io -c read -P 0x13 3145728M 10M --object secret,id=sec0,data=MTIzNDU2,format=base64 --image-opts driver=luks,key-secret=sec0,file.filename=TEST_DIR/luks-serpent-128-xts-plain64-sha1.img
|
|
read 10485760/10485760 bytes at offset 3298534883328
|
|
10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
|
|
|
|
# Write test pattern 0x91
|
|
qemu-io -c write -P 0x91 100M 10M --object secret,id=sec0,data=MTIzNDU2,format=base64 --image-opts driver=luks,key-secret=sec0,file.filename=TEST_DIR/luks-serpent-128-xts-plain64-sha1.img
|
|
wrote 10485760/10485760 bytes at offset 104857600
|
|
10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
|
|
|
|
# Write test pattern 0x5e
|
|
qemu-io -c write -P 0x5e 3145728M 10M --object secret,id=sec0,data=MTIzNDU2,format=base64 --image-opts driver=luks,key-secret=sec0,file.filename=TEST_DIR/luks-serpent-128-xts-plain64-sha1.img
|
|
wrote 10485760/10485760 bytes at offset 3298534883328
|
|
10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
|
|
|
|
# Open dev
|
|
sudo cryptsetup -q -v luksOpen TEST_DIR/luks-serpent-128-xts-plain64-sha1.img qiotest-145-serpent-128-xts-plain64-sha1
|
|
# Set dev owner
|
|
sudo chown UID:GID /dev/mapper/qiotest-145-serpent-128-xts-plain64-sha1
|
|
# Read test pattern 0x91
|
|
qemu-io -c read -P 0x91 100M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-serpent-128-xts-plain64-sha1
|
|
read 10485760/10485760 bytes at offset 104857600
|
|
10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
|
|
|
|
# Read test pattern 0x5e
|
|
qemu-io -c read -P 0x5e 3145728M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-serpent-128-xts-plain64-sha1
|
|
read 10485760/10485760 bytes at offset 3298534883328
|
|
10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
|
|
|
|
# Close dev
|
|
sudo cryptsetup -q -v luksClose qiotest-145-serpent-128-xts-plain64-sha1
|
|
# Delete image
|
|
unlink TEST_DIR/luks-serpent-128-xts-plain64-sha1.img
|
|
|
|
# ================= qemu-img serpent-128-xts-plain64-sha1 =================
|
|
# Create image
|
|
qemu-img create -f luks --object secret,id=sec0,data=MTIzNDU2,format=base64 -o key-secret=sec0,cipher-alg=serpent-128,cipher-mode=xts,ivgen-alg=plain64,hash-alg=sha1 TEST_DIR/luks-serpent-128-xts-plain64-sha1.img 4194304M
|
|
Formatting 'TEST_DIR/luks-serpent-128-xts-plain64-sha1.img', fmt=luks size=4398046511104 key-secret=sec0 cipher-alg=serpent-128 cipher-mode=xts ivgen-alg=plain64 hash-alg=sha1
|
|
|
|
# Open dev
|
|
sudo cryptsetup -q -v luksOpen TEST_DIR/luks-serpent-128-xts-plain64-sha1.img qiotest-145-serpent-128-xts-plain64-sha1
|
|
# Set dev owner
|
|
sudo chown UID:GID /dev/mapper/qiotest-145-serpent-128-xts-plain64-sha1
|
|
# Write test pattern 0xa7
|
|
qemu-io -c write -P 0xa7 100M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-serpent-128-xts-plain64-sha1
|
|
wrote 10485760/10485760 bytes at offset 104857600
|
|
10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
|
|
|
|
# Write test pattern 0x13
|
|
qemu-io -c write -P 0x13 3145728M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-serpent-128-xts-plain64-sha1
|
|
wrote 10485760/10485760 bytes at offset 3298534883328
|
|
10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
|
|
|
|
# Close dev
|
|
sudo cryptsetup -q -v luksClose qiotest-145-serpent-128-xts-plain64-sha1
|
|
# Read test pattern 0xa7
|
|
qemu-io -c read -P 0xa7 100M 10M --object secret,id=sec0,data=MTIzNDU2,format=base64 --image-opts driver=luks,key-secret=sec0,file.filename=TEST_DIR/luks-serpent-128-xts-plain64-sha1.img
|
|
read 10485760/10485760 bytes at offset 104857600
|
|
10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
|
|
|
|
# Read test pattern 0x13
|
|
qemu-io -c read -P 0x13 3145728M 10M --object secret,id=sec0,data=MTIzNDU2,format=base64 --image-opts driver=luks,key-secret=sec0,file.filename=TEST_DIR/luks-serpent-128-xts-plain64-sha1.img
|
|
read 10485760/10485760 bytes at offset 3298534883328
|
|
10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
|
|
|
|
# Write test pattern 0x91
|
|
qemu-io -c write -P 0x91 100M 10M --object secret,id=sec0,data=MTIzNDU2,format=base64 --image-opts driver=luks,key-secret=sec0,file.filename=TEST_DIR/luks-serpent-128-xts-plain64-sha1.img
|
|
wrote 10485760/10485760 bytes at offset 104857600
|
|
10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
|
|
|
|
# Write test pattern 0x5e
|
|
qemu-io -c write -P 0x5e 3145728M 10M --object secret,id=sec0,data=MTIzNDU2,format=base64 --image-opts driver=luks,key-secret=sec0,file.filename=TEST_DIR/luks-serpent-128-xts-plain64-sha1.img
|
|
wrote 10485760/10485760 bytes at offset 3298534883328
|
|
10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
|
|
|
|
# Open dev
|
|
sudo cryptsetup -q -v luksOpen TEST_DIR/luks-serpent-128-xts-plain64-sha1.img qiotest-145-serpent-128-xts-plain64-sha1
|
|
# Set dev owner
|
|
sudo chown UID:GID /dev/mapper/qiotest-145-serpent-128-xts-plain64-sha1
|
|
# Read test pattern 0x91
|
|
qemu-io -c read -P 0x91 100M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-serpent-128-xts-plain64-sha1
|
|
read 10485760/10485760 bytes at offset 104857600
|
|
10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
|
|
|
|
# Read test pattern 0x5e
|
|
qemu-io -c read -P 0x5e 3145728M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-serpent-128-xts-plain64-sha1
|
|
read 10485760/10485760 bytes at offset 3298534883328
|
|
10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
|
|
|
|
# Close dev
|
|
sudo cryptsetup -q -v luksClose qiotest-145-serpent-128-xts-plain64-sha1
|
|
# Delete image
|
|
unlink TEST_DIR/luks-serpent-128-xts-plain64-sha1.img
|
|
|
|
# ================= dm-crypt serpent-192-xts-plain64-sha1 =================
|
|
# Create image
|
|
truncate TEST_DIR/luks-serpent-192-xts-plain64-sha1.img --size 4194304MB
|
|
# Format image
|
|
sudo cryptsetup -q -v luksFormat --cipher serpent-xts-plain64 --key-size 384 --hash sha1 --key-slot 0 --key-file - TEST_DIR/luks-serpent-192-xts-plain64-sha1.img
|
|
# Open dev
|
|
sudo cryptsetup -q -v luksOpen TEST_DIR/luks-serpent-192-xts-plain64-sha1.img qiotest-145-serpent-192-xts-plain64-sha1
|
|
# Set dev owner
|
|
sudo chown UID:GID /dev/mapper/qiotest-145-serpent-192-xts-plain64-sha1
|
|
# Write test pattern 0xa7
|
|
qemu-io -c write -P 0xa7 100M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-serpent-192-xts-plain64-sha1
|
|
wrote 10485760/10485760 bytes at offset 104857600
|
|
10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
|
|
|
|
# Write test pattern 0x13
|
|
qemu-io -c write -P 0x13 3145728M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-serpent-192-xts-plain64-sha1
|
|
wrote 10485760/10485760 bytes at offset 3298534883328
|
|
10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
|
|
|
|
# Close dev
|
|
sudo cryptsetup -q -v luksClose qiotest-145-serpent-192-xts-plain64-sha1
|
|
# Read test pattern 0xa7
|
|
qemu-io -c read -P 0xa7 100M 10M --object secret,id=sec0,data=MTIzNDU2,format=base64 --image-opts driver=luks,key-secret=sec0,file.filename=TEST_DIR/luks-serpent-192-xts-plain64-sha1.img
|
|
read 10485760/10485760 bytes at offset 104857600
|
|
10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
|
|
|
|
# Read test pattern 0x13
|
|
qemu-io -c read -P 0x13 3145728M 10M --object secret,id=sec0,data=MTIzNDU2,format=base64 --image-opts driver=luks,key-secret=sec0,file.filename=TEST_DIR/luks-serpent-192-xts-plain64-sha1.img
|
|
read 10485760/10485760 bytes at offset 3298534883328
|
|
10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
|
|
|
|
# Write test pattern 0x91
|
|
qemu-io -c write -P 0x91 100M 10M --object secret,id=sec0,data=MTIzNDU2,format=base64 --image-opts driver=luks,key-secret=sec0,file.filename=TEST_DIR/luks-serpent-192-xts-plain64-sha1.img
|
|
wrote 10485760/10485760 bytes at offset 104857600
|
|
10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
|
|
|
|
# Write test pattern 0x5e
|
|
qemu-io -c write -P 0x5e 3145728M 10M --object secret,id=sec0,data=MTIzNDU2,format=base64 --image-opts driver=luks,key-secret=sec0,file.filename=TEST_DIR/luks-serpent-192-xts-plain64-sha1.img
|
|
wrote 10485760/10485760 bytes at offset 3298534883328
|
|
10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
|
|
|
|
# Open dev
|
|
sudo cryptsetup -q -v luksOpen TEST_DIR/luks-serpent-192-xts-plain64-sha1.img qiotest-145-serpent-192-xts-plain64-sha1
|
|
# Set dev owner
|
|
sudo chown UID:GID /dev/mapper/qiotest-145-serpent-192-xts-plain64-sha1
|
|
# Read test pattern 0x91
|
|
qemu-io -c read -P 0x91 100M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-serpent-192-xts-plain64-sha1
|
|
read 10485760/10485760 bytes at offset 104857600
|
|
10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
|
|
|
|
# Read test pattern 0x5e
|
|
qemu-io -c read -P 0x5e 3145728M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-serpent-192-xts-plain64-sha1
|
|
read 10485760/10485760 bytes at offset 3298534883328
|
|
10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
|
|
|
|
# Close dev
|
|
sudo cryptsetup -q -v luksClose qiotest-145-serpent-192-xts-plain64-sha1
|
|
# Delete image
|
|
unlink TEST_DIR/luks-serpent-192-xts-plain64-sha1.img
|
|
|
|
# ================= qemu-img serpent-192-xts-plain64-sha1 =================
|
|
# Create image
|
|
qemu-img create -f luks --object secret,id=sec0,data=MTIzNDU2,format=base64 -o key-secret=sec0,cipher-alg=serpent-192,cipher-mode=xts,ivgen-alg=plain64,hash-alg=sha1 TEST_DIR/luks-serpent-192-xts-plain64-sha1.img 4194304M
|
|
Formatting 'TEST_DIR/luks-serpent-192-xts-plain64-sha1.img', fmt=luks size=4398046511104 key-secret=sec0 cipher-alg=serpent-192 cipher-mode=xts ivgen-alg=plain64 hash-alg=sha1
|
|
|
|
# Open dev
|
|
sudo cryptsetup -q -v luksOpen TEST_DIR/luks-serpent-192-xts-plain64-sha1.img qiotest-145-serpent-192-xts-plain64-sha1
|
|
# Set dev owner
|
|
sudo chown UID:GID /dev/mapper/qiotest-145-serpent-192-xts-plain64-sha1
|
|
# Write test pattern 0xa7
|
|
qemu-io -c write -P 0xa7 100M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-serpent-192-xts-plain64-sha1
|
|
wrote 10485760/10485760 bytes at offset 104857600
|
|
10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
|
|
|
|
# Write test pattern 0x13
|
|
qemu-io -c write -P 0x13 3145728M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-serpent-192-xts-plain64-sha1
|
|
wrote 10485760/10485760 bytes at offset 3298534883328
|
|
10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
|
|
|
|
# Close dev
|
|
sudo cryptsetup -q -v luksClose qiotest-145-serpent-192-xts-plain64-sha1
|
|
# Read test pattern 0xa7
|
|
qemu-io -c read -P 0xa7 100M 10M --object secret,id=sec0,data=MTIzNDU2,format=base64 --image-opts driver=luks,key-secret=sec0,file.filename=TEST_DIR/luks-serpent-192-xts-plain64-sha1.img
|
|
read 10485760/10485760 bytes at offset 104857600
|
|
10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
|
|
|
|
# Read test pattern 0x13
|
|
qemu-io -c read -P 0x13 3145728M 10M --object secret,id=sec0,data=MTIzNDU2,format=base64 --image-opts driver=luks,key-secret=sec0,file.filename=TEST_DIR/luks-serpent-192-xts-plain64-sha1.img
|
|
read 10485760/10485760 bytes at offset 3298534883328
|
|
10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
|
|
|
|
# Write test pattern 0x91
|
|
qemu-io -c write -P 0x91 100M 10M --object secret,id=sec0,data=MTIzNDU2,format=base64 --image-opts driver=luks,key-secret=sec0,file.filename=TEST_DIR/luks-serpent-192-xts-plain64-sha1.img
|
|
wrote 10485760/10485760 bytes at offset 104857600
|
|
10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
|
|
|
|
# Write test pattern 0x5e
|
|
qemu-io -c write -P 0x5e 3145728M 10M --object secret,id=sec0,data=MTIzNDU2,format=base64 --image-opts driver=luks,key-secret=sec0,file.filename=TEST_DIR/luks-serpent-192-xts-plain64-sha1.img
|
|
wrote 10485760/10485760 bytes at offset 3298534883328
|
|
10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
|
|
|
|
# Open dev
|
|
sudo cryptsetup -q -v luksOpen TEST_DIR/luks-serpent-192-xts-plain64-sha1.img qiotest-145-serpent-192-xts-plain64-sha1
|
|
# Set dev owner
|
|
sudo chown UID:GID /dev/mapper/qiotest-145-serpent-192-xts-plain64-sha1
|
|
# Read test pattern 0x91
|
|
qemu-io -c read -P 0x91 100M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-serpent-192-xts-plain64-sha1
|
|
read 10485760/10485760 bytes at offset 104857600
|
|
10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
|
|
|
|
# Read test pattern 0x5e
|
|
qemu-io -c read -P 0x5e 3145728M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-serpent-192-xts-plain64-sha1
|
|
read 10485760/10485760 bytes at offset 3298534883328
|
|
10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
|
|
|
|
# Close dev
|
|
sudo cryptsetup -q -v luksClose qiotest-145-serpent-192-xts-plain64-sha1
|
|
# Delete image
|
|
unlink TEST_DIR/luks-serpent-192-xts-plain64-sha1.img
|
|
|
|
Skipping cast6-128-xts-plain64-sha1 in blacklist
|
|
Skipping cast6-192-xts-plain64-sha1 in blacklist
|
|
# ================= dm-crypt aes-256-xts-plain64-sha256 =================
|
|
# Create image
|
|
truncate TEST_DIR/luks-aes-256-xts-plain64-sha256.img --size 4194304MB
|
|
# Format image
|
|
sudo cryptsetup -q -v luksFormat --cipher aes-xts-plain64 --key-size 512 --hash sha256 --key-slot 0 --key-file - TEST_DIR/luks-aes-256-xts-plain64-sha256.img
|
|
# Open dev
|
|
sudo cryptsetup -q -v luksOpen TEST_DIR/luks-aes-256-xts-plain64-sha256.img qiotest-145-aes-256-xts-plain64-sha256
|
|
# Set dev owner
|
|
sudo chown UID:GID /dev/mapper/qiotest-145-aes-256-xts-plain64-sha256
|
|
# Write test pattern 0xa7
|
|
qemu-io -c write -P 0xa7 100M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-aes-256-xts-plain64-sha256
|
|
wrote 10485760/10485760 bytes at offset 104857600
|
|
10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
|
|
|
|
# Write test pattern 0x13
|
|
qemu-io -c write -P 0x13 3145728M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-aes-256-xts-plain64-sha256
|
|
wrote 10485760/10485760 bytes at offset 3298534883328
|
|
10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
|
|
|
|
# Close dev
|
|
sudo cryptsetup -q -v luksClose qiotest-145-aes-256-xts-plain64-sha256
|
|
# Read test pattern 0xa7
|
|
qemu-io -c read -P 0xa7 100M 10M --object secret,id=sec0,data=MTIzNDU2,format=base64 --image-opts driver=luks,key-secret=sec0,file.filename=TEST_DIR/luks-aes-256-xts-plain64-sha256.img
|
|
read 10485760/10485760 bytes at offset 104857600
|
|
10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
|
|
|
|
# Read test pattern 0x13
|
|
qemu-io -c read -P 0x13 3145728M 10M --object secret,id=sec0,data=MTIzNDU2,format=base64 --image-opts driver=luks,key-secret=sec0,file.filename=TEST_DIR/luks-aes-256-xts-plain64-sha256.img
|
|
read 10485760/10485760 bytes at offset 3298534883328
|
|
10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
|
|
|
|
# Write test pattern 0x91
|
|
qemu-io -c write -P 0x91 100M 10M --object secret,id=sec0,data=MTIzNDU2,format=base64 --image-opts driver=luks,key-secret=sec0,file.filename=TEST_DIR/luks-aes-256-xts-plain64-sha256.img
|
|
wrote 10485760/10485760 bytes at offset 104857600
|
|
10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
|
|
|
|
# Write test pattern 0x5e
|
|
qemu-io -c write -P 0x5e 3145728M 10M --object secret,id=sec0,data=MTIzNDU2,format=base64 --image-opts driver=luks,key-secret=sec0,file.filename=TEST_DIR/luks-aes-256-xts-plain64-sha256.img
|
|
wrote 10485760/10485760 bytes at offset 3298534883328
|
|
10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
|
|
|
|
# Open dev
|
|
sudo cryptsetup -q -v luksOpen TEST_DIR/luks-aes-256-xts-plain64-sha256.img qiotest-145-aes-256-xts-plain64-sha256
|
|
# Set dev owner
|
|
sudo chown UID:GID /dev/mapper/qiotest-145-aes-256-xts-plain64-sha256
|
|
# Read test pattern 0x91
|
|
qemu-io -c read -P 0x91 100M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-aes-256-xts-plain64-sha256
|
|
read 10485760/10485760 bytes at offset 104857600
|
|
10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
|
|
|
|
# Read test pattern 0x5e
|
|
qemu-io -c read -P 0x5e 3145728M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-aes-256-xts-plain64-sha256
|
|
read 10485760/10485760 bytes at offset 3298534883328
|
|
10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
|
|
|
|
# Close dev
|
|
sudo cryptsetup -q -v luksClose qiotest-145-aes-256-xts-plain64-sha256
|
|
# Delete image
|
|
unlink TEST_DIR/luks-aes-256-xts-plain64-sha256.img
|
|
|
|
# ================= qemu-img aes-256-xts-plain64-sha256 =================
|
|
# Create image
|
|
qemu-img create -f luks --object secret,id=sec0,data=MTIzNDU2,format=base64 -o key-secret=sec0,cipher-alg=aes-256,cipher-mode=xts,ivgen-alg=plain64,hash-alg=sha256 TEST_DIR/luks-aes-256-xts-plain64-sha256.img 4194304M
|
|
Formatting 'TEST_DIR/luks-aes-256-xts-plain64-sha256.img', fmt=luks size=4398046511104 key-secret=sec0 cipher-alg=aes-256 cipher-mode=xts ivgen-alg=plain64 hash-alg=sha256
|
|
|
|
# Open dev
|
|
sudo cryptsetup -q -v luksOpen TEST_DIR/luks-aes-256-xts-plain64-sha256.img qiotest-145-aes-256-xts-plain64-sha256
|
|
# Set dev owner
|
|
sudo chown UID:GID /dev/mapper/qiotest-145-aes-256-xts-plain64-sha256
|
|
# Write test pattern 0xa7
|
|
qemu-io -c write -P 0xa7 100M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-aes-256-xts-plain64-sha256
|
|
wrote 10485760/10485760 bytes at offset 104857600
|
|
10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
|
|
|
|
# Write test pattern 0x13
|
|
qemu-io -c write -P 0x13 3145728M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-aes-256-xts-plain64-sha256
|
|
wrote 10485760/10485760 bytes at offset 3298534883328
|
|
10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
|
|
|
|
# Close dev
|
|
sudo cryptsetup -q -v luksClose qiotest-145-aes-256-xts-plain64-sha256
|
|
# Read test pattern 0xa7
|
|
qemu-io -c read -P 0xa7 100M 10M --object secret,id=sec0,data=MTIzNDU2,format=base64 --image-opts driver=luks,key-secret=sec0,file.filename=TEST_DIR/luks-aes-256-xts-plain64-sha256.img
|
|
read 10485760/10485760 bytes at offset 104857600
|
|
10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
|
|
|
|
# Read test pattern 0x13
|
|
qemu-io -c read -P 0x13 3145728M 10M --object secret,id=sec0,data=MTIzNDU2,format=base64 --image-opts driver=luks,key-secret=sec0,file.filename=TEST_DIR/luks-aes-256-xts-plain64-sha256.img
|
|
read 10485760/10485760 bytes at offset 3298534883328
|
|
10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
|
|
|
|
# Write test pattern 0x91
|
|
qemu-io -c write -P 0x91 100M 10M --object secret,id=sec0,data=MTIzNDU2,format=base64 --image-opts driver=luks,key-secret=sec0,file.filename=TEST_DIR/luks-aes-256-xts-plain64-sha256.img
|
|
wrote 10485760/10485760 bytes at offset 104857600
|
|
10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
|
|
|
|
# Write test pattern 0x5e
|
|
qemu-io -c write -P 0x5e 3145728M 10M --object secret,id=sec0,data=MTIzNDU2,format=base64 --image-opts driver=luks,key-secret=sec0,file.filename=TEST_DIR/luks-aes-256-xts-plain64-sha256.img
|
|
wrote 10485760/10485760 bytes at offset 3298534883328
|
|
10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
|
|
|
|
# Open dev
|
|
sudo cryptsetup -q -v luksOpen TEST_DIR/luks-aes-256-xts-plain64-sha256.img qiotest-145-aes-256-xts-plain64-sha256
|
|
# Set dev owner
|
|
sudo chown UID:GID /dev/mapper/qiotest-145-aes-256-xts-plain64-sha256
|
|
# Read test pattern 0x91
|
|
qemu-io -c read -P 0x91 100M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-aes-256-xts-plain64-sha256
|
|
read 10485760/10485760 bytes at offset 104857600
|
|
10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
|
|
|
|
# Read test pattern 0x5e
|
|
qemu-io -c read -P 0x5e 3145728M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-aes-256-xts-plain64-sha256
|
|
read 10485760/10485760 bytes at offset 3298534883328
|
|
10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
|
|
|
|
# Close dev
|
|
sudo cryptsetup -q -v luksClose qiotest-145-aes-256-xts-plain64-sha256
|
|
# Delete image
|
|
unlink TEST_DIR/luks-aes-256-xts-plain64-sha256.img
|
|
|
|
Skipping aes-256-xts-plain64-sha512 in blacklist
|
|
Skipping aes-256-xts-plain64-ripemd160 in blacklist
|
|
# ================= dm-crypt aes-256-xts-plain-sha1-pwslot3 =================
|
|
# Create image
|
|
truncate TEST_DIR/luks-aes-256-xts-plain-sha1-pwslot3.img --size 4194304MB
|
|
# Format image
|
|
sudo cryptsetup -q -v luksFormat --cipher aes-xts-plain --key-size 512 --hash sha1 --key-slot 3 --key-file - TEST_DIR/luks-aes-256-xts-plain-sha1-pwslot3.img
|
|
# Open dev
|
|
sudo cryptsetup -q -v luksOpen TEST_DIR/luks-aes-256-xts-plain-sha1-pwslot3.img qiotest-145-aes-256-xts-plain-sha1-pwslot3
|
|
# Set dev owner
|
|
sudo chown UID:GID /dev/mapper/qiotest-145-aes-256-xts-plain-sha1-pwslot3
|
|
# Write test pattern 0xa7
|
|
qemu-io -c write -P 0xa7 100M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-aes-256-xts-plain-sha1-pwslot3
|
|
wrote 10485760/10485760 bytes at offset 104857600
|
|
10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
|
|
|
|
# Write test pattern 0x13
|
|
qemu-io -c write -P 0x13 3145728M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-aes-256-xts-plain-sha1-pwslot3
|
|
wrote 10485760/10485760 bytes at offset 3298534883328
|
|
10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
|
|
|
|
# Close dev
|
|
sudo cryptsetup -q -v luksClose qiotest-145-aes-256-xts-plain-sha1-pwslot3
|
|
# Read test pattern 0xa7
|
|
qemu-io -c read -P 0xa7 100M 10M --object secret,id=sec0,data=c2xvdDM=,format=base64 --image-opts driver=luks,key-secret=sec0,file.filename=TEST_DIR/luks-aes-256-xts-plain-sha1-pwslot3.img
|
|
read 10485760/10485760 bytes at offset 104857600
|
|
10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
|
|
|
|
# Read test pattern 0x13
|
|
qemu-io -c read -P 0x13 3145728M 10M --object secret,id=sec0,data=c2xvdDM=,format=base64 --image-opts driver=luks,key-secret=sec0,file.filename=TEST_DIR/luks-aes-256-xts-plain-sha1-pwslot3.img
|
|
read 10485760/10485760 bytes at offset 3298534883328
|
|
10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
|
|
|
|
# Write test pattern 0x91
|
|
qemu-io -c write -P 0x91 100M 10M --object secret,id=sec0,data=c2xvdDM=,format=base64 --image-opts driver=luks,key-secret=sec0,file.filename=TEST_DIR/luks-aes-256-xts-plain-sha1-pwslot3.img
|
|
wrote 10485760/10485760 bytes at offset 104857600
|
|
10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
|
|
|
|
# Write test pattern 0x5e
|
|
qemu-io -c write -P 0x5e 3145728M 10M --object secret,id=sec0,data=c2xvdDM=,format=base64 --image-opts driver=luks,key-secret=sec0,file.filename=TEST_DIR/luks-aes-256-xts-plain-sha1-pwslot3.img
|
|
wrote 10485760/10485760 bytes at offset 3298534883328
|
|
10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
|
|
|
|
# Open dev
|
|
sudo cryptsetup -q -v luksOpen TEST_DIR/luks-aes-256-xts-plain-sha1-pwslot3.img qiotest-145-aes-256-xts-plain-sha1-pwslot3
|
|
# Set dev owner
|
|
sudo chown UID:GID /dev/mapper/qiotest-145-aes-256-xts-plain-sha1-pwslot3
|
|
# Read test pattern 0x91
|
|
qemu-io -c read -P 0x91 100M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-aes-256-xts-plain-sha1-pwslot3
|
|
read 10485760/10485760 bytes at offset 104857600
|
|
10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
|
|
|
|
# Read test pattern 0x5e
|
|
qemu-io -c read -P 0x5e 3145728M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-aes-256-xts-plain-sha1-pwslot3
|
|
read 10485760/10485760 bytes at offset 3298534883328
|
|
10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
|
|
|
|
# Close dev
|
|
sudo cryptsetup -q -v luksClose qiotest-145-aes-256-xts-plain-sha1-pwslot3
|
|
# Delete image
|
|
unlink TEST_DIR/luks-aes-256-xts-plain-sha1-pwslot3.img
|
|
|
|
# ================= dm-crypt aes-256-xts-plain-sha1-pwallslots =================
|
|
# Create image
|
|
truncate TEST_DIR/luks-aes-256-xts-plain-sha1-pwallslots.img --size 4194304MB
|
|
# Format image
|
|
sudo cryptsetup -q -v luksFormat --cipher aes-xts-plain --key-size 512 --hash sha1 --key-slot 0 --key-file - TEST_DIR/luks-aes-256-xts-plain-sha1-pwallslots.img
|
|
# Add password slot 1
|
|
sudo cryptsetup -q -v luksAddKey TEST_DIR/luks-aes-256-xts-plain-sha1-pwallslots.img --key-slot 1 --key-file - TEST_DIR/passwd.txt
|
|
# Add password slot 2
|
|
sudo cryptsetup -q -v luksAddKey TEST_DIR/luks-aes-256-xts-plain-sha1-pwallslots.img --key-slot 2 --key-file - TEST_DIR/passwd.txt
|
|
# Add password slot 3
|
|
sudo cryptsetup -q -v luksAddKey TEST_DIR/luks-aes-256-xts-plain-sha1-pwallslots.img --key-slot 3 --key-file - TEST_DIR/passwd.txt
|
|
# Add password slot 4
|
|
sudo cryptsetup -q -v luksAddKey TEST_DIR/luks-aes-256-xts-plain-sha1-pwallslots.img --key-slot 4 --key-file - TEST_DIR/passwd.txt
|
|
# Add password slot 5
|
|
sudo cryptsetup -q -v luksAddKey TEST_DIR/luks-aes-256-xts-plain-sha1-pwallslots.img --key-slot 5 --key-file - TEST_DIR/passwd.txt
|
|
# Add password slot 6
|
|
sudo cryptsetup -q -v luksAddKey TEST_DIR/luks-aes-256-xts-plain-sha1-pwallslots.img --key-slot 6 --key-file - TEST_DIR/passwd.txt
|
|
# Add password slot 7
|
|
sudo cryptsetup -q -v luksAddKey TEST_DIR/luks-aes-256-xts-plain-sha1-pwallslots.img --key-slot 7 --key-file - TEST_DIR/passwd.txt
|
|
# Open dev
|
|
sudo cryptsetup -q -v luksOpen TEST_DIR/luks-aes-256-xts-plain-sha1-pwallslots.img qiotest-145-aes-256-xts-plain-sha1-pwallslots
|
|
# Set dev owner
|
|
sudo chown UID:GID /dev/mapper/qiotest-145-aes-256-xts-plain-sha1-pwallslots
|
|
# Write test pattern 0xa7
|
|
qemu-io -c write -P 0xa7 100M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-aes-256-xts-plain-sha1-pwallslots
|
|
wrote 10485760/10485760 bytes at offset 104857600
|
|
10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
|
|
|
|
# Write test pattern 0x13
|
|
qemu-io -c write -P 0x13 3145728M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-aes-256-xts-plain-sha1-pwallslots
|
|
wrote 10485760/10485760 bytes at offset 3298534883328
|
|
10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
|
|
|
|
# Close dev
|
|
sudo cryptsetup -q -v luksClose qiotest-145-aes-256-xts-plain-sha1-pwallslots
|
|
# Read test pattern 0xa7
|
|
qemu-io -c read -P 0xa7 100M 10M --object secret,id=sec0,data=c2xvdDE=,format=base64 --image-opts driver=luks,key-secret=sec0,file.filename=TEST_DIR/luks-aes-256-xts-plain-sha1-pwallslots.img
|
|
read 10485760/10485760 bytes at offset 104857600
|
|
10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
|
|
|
|
# Read test pattern 0x13
|
|
qemu-io -c read -P 0x13 3145728M 10M --object secret,id=sec0,data=c2xvdDE=,format=base64 --image-opts driver=luks,key-secret=sec0,file.filename=TEST_DIR/luks-aes-256-xts-plain-sha1-pwallslots.img
|
|
read 10485760/10485760 bytes at offset 3298534883328
|
|
10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
|
|
|
|
# Write test pattern 0x91
|
|
qemu-io -c write -P 0x91 100M 10M --object secret,id=sec0,data=c2xvdDE=,format=base64 --image-opts driver=luks,key-secret=sec0,file.filename=TEST_DIR/luks-aes-256-xts-plain-sha1-pwallslots.img
|
|
wrote 10485760/10485760 bytes at offset 104857600
|
|
10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
|
|
|
|
# Write test pattern 0x5e
|
|
qemu-io -c write -P 0x5e 3145728M 10M --object secret,id=sec0,data=c2xvdDE=,format=base64 --image-opts driver=luks,key-secret=sec0,file.filename=TEST_DIR/luks-aes-256-xts-plain-sha1-pwallslots.img
|
|
wrote 10485760/10485760 bytes at offset 3298534883328
|
|
10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
|
|
|
|
# Open dev
|
|
sudo cryptsetup -q -v luksOpen TEST_DIR/luks-aes-256-xts-plain-sha1-pwallslots.img qiotest-145-aes-256-xts-plain-sha1-pwallslots
|
|
# Set dev owner
|
|
sudo chown UID:GID /dev/mapper/qiotest-145-aes-256-xts-plain-sha1-pwallslots
|
|
# Read test pattern 0x91
|
|
qemu-io -c read -P 0x91 100M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-aes-256-xts-plain-sha1-pwallslots
|
|
read 10485760/10485760 bytes at offset 104857600
|
|
10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
|
|
|
|
# Read test pattern 0x5e
|
|
qemu-io -c read -P 0x5e 3145728M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-aes-256-xts-plain-sha1-pwallslots
|
|
read 10485760/10485760 bytes at offset 3298534883328
|
|
10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
|
|
|
|
# Close dev
|
|
sudo cryptsetup -q -v luksClose qiotest-145-aes-256-xts-plain-sha1-pwallslots
|
|
# Delete image
|
|
unlink TEST_DIR/luks-aes-256-xts-plain-sha1-pwallslots.img
|
|
|
|
# ================= qemu-img aes-256-xts-plain-sha1-pwallslots =================
|
|
# Create image
|
|
qemu-img create -f luks --object secret,id=sec0,data=c2xvdDE=,format=base64 -o key-secret=sec0,cipher-alg=aes-256,cipher-mode=xts,ivgen-alg=plain,hash-alg=sha1 TEST_DIR/luks-aes-256-xts-plain-sha1-pwallslots.img 4194304M
|
|
Formatting 'TEST_DIR/luks-aes-256-xts-plain-sha1-pwallslots.img', fmt=luks size=4398046511104 key-secret=sec0 cipher-alg=aes-256 cipher-mode=xts ivgen-alg=plain hash-alg=sha1
|
|
|
|
# Open dev
|
|
sudo cryptsetup -q -v luksOpen TEST_DIR/luks-aes-256-xts-plain-sha1-pwallslots.img qiotest-145-aes-256-xts-plain-sha1-pwallslots
|
|
# Set dev owner
|
|
sudo chown UID:GID /dev/mapper/qiotest-145-aes-256-xts-plain-sha1-pwallslots
|
|
# Write test pattern 0xa7
|
|
qemu-io -c write -P 0xa7 100M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-aes-256-xts-plain-sha1-pwallslots
|
|
wrote 10485760/10485760 bytes at offset 104857600
|
|
10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
|
|
|
|
# Write test pattern 0x13
|
|
qemu-io -c write -P 0x13 3145728M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-aes-256-xts-plain-sha1-pwallslots
|
|
wrote 10485760/10485760 bytes at offset 3298534883328
|
|
10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
|
|
|
|
# Close dev
|
|
sudo cryptsetup -q -v luksClose qiotest-145-aes-256-xts-plain-sha1-pwallslots
|
|
# Read test pattern 0xa7
|
|
qemu-io -c read -P 0xa7 100M 10M --object secret,id=sec0,data=c2xvdDE=,format=base64 --image-opts driver=luks,key-secret=sec0,file.filename=TEST_DIR/luks-aes-256-xts-plain-sha1-pwallslots.img
|
|
read 10485760/10485760 bytes at offset 104857600
|
|
10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
|
|
|
|
# Read test pattern 0x13
|
|
qemu-io -c read -P 0x13 3145728M 10M --object secret,id=sec0,data=c2xvdDE=,format=base64 --image-opts driver=luks,key-secret=sec0,file.filename=TEST_DIR/luks-aes-256-xts-plain-sha1-pwallslots.img
|
|
read 10485760/10485760 bytes at offset 3298534883328
|
|
10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
|
|
|
|
# Write test pattern 0x91
|
|
qemu-io -c write -P 0x91 100M 10M --object secret,id=sec0,data=c2xvdDE=,format=base64 --image-opts driver=luks,key-secret=sec0,file.filename=TEST_DIR/luks-aes-256-xts-plain-sha1-pwallslots.img
|
|
wrote 10485760/10485760 bytes at offset 104857600
|
|
10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
|
|
|
|
# Write test pattern 0x5e
|
|
qemu-io -c write -P 0x5e 3145728M 10M --object secret,id=sec0,data=c2xvdDE=,format=base64 --image-opts driver=luks,key-secret=sec0,file.filename=TEST_DIR/luks-aes-256-xts-plain-sha1-pwallslots.img
|
|
wrote 10485760/10485760 bytes at offset 3298534883328
|
|
10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
|
|
|
|
# Open dev
|
|
sudo cryptsetup -q -v luksOpen TEST_DIR/luks-aes-256-xts-plain-sha1-pwallslots.img qiotest-145-aes-256-xts-plain-sha1-pwallslots
|
|
# Set dev owner
|
|
sudo chown UID:GID /dev/mapper/qiotest-145-aes-256-xts-plain-sha1-pwallslots
|
|
# Read test pattern 0x91
|
|
qemu-io -c read -P 0x91 100M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-aes-256-xts-plain-sha1-pwallslots
|
|
read 10485760/10485760 bytes at offset 104857600
|
|
10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
|
|
|
|
# Read test pattern 0x5e
|
|
qemu-io -c read -P 0x5e 3145728M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-aes-256-xts-plain-sha1-pwallslots
|
|
read 10485760/10485760 bytes at offset 3298534883328
|
|
10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
|
|
|
|
# Close dev
|
|
sudo cryptsetup -q -v luksClose qiotest-145-aes-256-xts-plain-sha1-pwallslots
|
|
# Delete image
|
|
unlink TEST_DIR/luks-aes-256-xts-plain-sha1-pwallslots.img
|
|
|
|
# ================= dm-crypt aes-256-cbc-essiv-auto-sha1 =================
|
|
# Create image
|
|
truncate TEST_DIR/luks-aes-256-cbc-essiv-auto-sha1.img --size 4194304MB
|
|
# Format image
|
|
sudo cryptsetup -q -v luksFormat --cipher aes-cbc-essiv:sha256 --key-size 256 --hash sha1 --key-slot 0 --key-file - TEST_DIR/luks-aes-256-cbc-essiv-auto-sha1.img
|
|
# Open dev
|
|
sudo cryptsetup -q -v luksOpen TEST_DIR/luks-aes-256-cbc-essiv-auto-sha1.img qiotest-145-aes-256-cbc-essiv-auto-sha1
|
|
# Set dev owner
|
|
sudo chown UID:GID /dev/mapper/qiotest-145-aes-256-cbc-essiv-auto-sha1
|
|
# Write test pattern 0xa7
|
|
qemu-io -c write -P 0xa7 100M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-aes-256-cbc-essiv-auto-sha1
|
|
wrote 10485760/10485760 bytes at offset 104857600
|
|
10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
|
|
|
|
# Write test pattern 0x13
|
|
qemu-io -c write -P 0x13 3145728M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-aes-256-cbc-essiv-auto-sha1
|
|
wrote 10485760/10485760 bytes at offset 3298534883328
|
|
10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
|
|
|
|
# Close dev
|
|
sudo cryptsetup -q -v luksClose qiotest-145-aes-256-cbc-essiv-auto-sha1
|
|
# Read test pattern 0xa7
|
|
qemu-io -c read -P 0xa7 100M 10M --object secret,id=sec0,data=MTIzNDU2,format=base64 --image-opts driver=luks,key-secret=sec0,file.filename=TEST_DIR/luks-aes-256-cbc-essiv-auto-sha1.img
|
|
read 10485760/10485760 bytes at offset 104857600
|
|
10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
|
|
|
|
# Read test pattern 0x13
|
|
qemu-io -c read -P 0x13 3145728M 10M --object secret,id=sec0,data=MTIzNDU2,format=base64 --image-opts driver=luks,key-secret=sec0,file.filename=TEST_DIR/luks-aes-256-cbc-essiv-auto-sha1.img
|
|
read 10485760/10485760 bytes at offset 3298534883328
|
|
10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
|
|
|
|
# Write test pattern 0x91
|
|
qemu-io -c write -P 0x91 100M 10M --object secret,id=sec0,data=MTIzNDU2,format=base64 --image-opts driver=luks,key-secret=sec0,file.filename=TEST_DIR/luks-aes-256-cbc-essiv-auto-sha1.img
|
|
wrote 10485760/10485760 bytes at offset 104857600
|
|
10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
|
|
|
|
# Write test pattern 0x5e
|
|
qemu-io -c write -P 0x5e 3145728M 10M --object secret,id=sec0,data=MTIzNDU2,format=base64 --image-opts driver=luks,key-secret=sec0,file.filename=TEST_DIR/luks-aes-256-cbc-essiv-auto-sha1.img
|
|
wrote 10485760/10485760 bytes at offset 3298534883328
|
|
10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
|
|
|
|
# Open dev
|
|
sudo cryptsetup -q -v luksOpen TEST_DIR/luks-aes-256-cbc-essiv-auto-sha1.img qiotest-145-aes-256-cbc-essiv-auto-sha1
|
|
# Set dev owner
|
|
sudo chown UID:GID /dev/mapper/qiotest-145-aes-256-cbc-essiv-auto-sha1
|
|
# Read test pattern 0x91
|
|
qemu-io -c read -P 0x91 100M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-aes-256-cbc-essiv-auto-sha1
|
|
read 10485760/10485760 bytes at offset 104857600
|
|
10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
|
|
|
|
# Read test pattern 0x5e
|
|
qemu-io -c read -P 0x5e 3145728M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-aes-256-cbc-essiv-auto-sha1
|
|
read 10485760/10485760 bytes at offset 3298534883328
|
|
10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
|
|
|
|
# Close dev
|
|
sudo cryptsetup -q -v luksClose qiotest-145-aes-256-cbc-essiv-auto-sha1
|
|
# Delete image
|
|
unlink TEST_DIR/luks-aes-256-cbc-essiv-auto-sha1.img
|
|
|
|
# ================= qemu-img aes-256-cbc-essiv-auto-sha1 =================
|
|
# Create image
|
|
qemu-img create -f luks --object secret,id=sec0,data=MTIzNDU2,format=base64 -o key-secret=sec0,cipher-alg=aes-256,cipher-mode=cbc,ivgen-alg=essiv,hash-alg=sha1 TEST_DIR/luks-aes-256-cbc-essiv-auto-sha1.img 4194304M
|
|
Formatting 'TEST_DIR/luks-aes-256-cbc-essiv-auto-sha1.img', fmt=luks size=4398046511104 key-secret=sec0 cipher-alg=aes-256 cipher-mode=cbc ivgen-alg=essiv hash-alg=sha1
|
|
|
|
# Open dev
|
|
sudo cryptsetup -q -v luksOpen TEST_DIR/luks-aes-256-cbc-essiv-auto-sha1.img qiotest-145-aes-256-cbc-essiv-auto-sha1
|
|
# Set dev owner
|
|
sudo chown UID:GID /dev/mapper/qiotest-145-aes-256-cbc-essiv-auto-sha1
|
|
# Write test pattern 0xa7
|
|
qemu-io -c write -P 0xa7 100M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-aes-256-cbc-essiv-auto-sha1
|
|
wrote 10485760/10485760 bytes at offset 104857600
|
|
10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
|
|
|
|
# Write test pattern 0x13
|
|
qemu-io -c write -P 0x13 3145728M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-aes-256-cbc-essiv-auto-sha1
|
|
wrote 10485760/10485760 bytes at offset 3298534883328
|
|
10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
|
|
|
|
# Close dev
|
|
sudo cryptsetup -q -v luksClose qiotest-145-aes-256-cbc-essiv-auto-sha1
|
|
# Read test pattern 0xa7
|
|
qemu-io -c read -P 0xa7 100M 10M --object secret,id=sec0,data=MTIzNDU2,format=base64 --image-opts driver=luks,key-secret=sec0,file.filename=TEST_DIR/luks-aes-256-cbc-essiv-auto-sha1.img
|
|
read 10485760/10485760 bytes at offset 104857600
|
|
10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
|
|
|
|
# Read test pattern 0x13
|
|
qemu-io -c read -P 0x13 3145728M 10M --object secret,id=sec0,data=MTIzNDU2,format=base64 --image-opts driver=luks,key-secret=sec0,file.filename=TEST_DIR/luks-aes-256-cbc-essiv-auto-sha1.img
|
|
read 10485760/10485760 bytes at offset 3298534883328
|
|
10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
|
|
|
|
# Write test pattern 0x91
|
|
qemu-io -c write -P 0x91 100M 10M --object secret,id=sec0,data=MTIzNDU2,format=base64 --image-opts driver=luks,key-secret=sec0,file.filename=TEST_DIR/luks-aes-256-cbc-essiv-auto-sha1.img
|
|
wrote 10485760/10485760 bytes at offset 104857600
|
|
10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
|
|
|
|
# Write test pattern 0x5e
|
|
qemu-io -c write -P 0x5e 3145728M 10M --object secret,id=sec0,data=MTIzNDU2,format=base64 --image-opts driver=luks,key-secret=sec0,file.filename=TEST_DIR/luks-aes-256-cbc-essiv-auto-sha1.img
|
|
wrote 10485760/10485760 bytes at offset 3298534883328
|
|
10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
|
|
|
|
# Open dev
|
|
sudo cryptsetup -q -v luksOpen TEST_DIR/luks-aes-256-cbc-essiv-auto-sha1.img qiotest-145-aes-256-cbc-essiv-auto-sha1
|
|
# Set dev owner
|
|
sudo chown UID:GID /dev/mapper/qiotest-145-aes-256-cbc-essiv-auto-sha1
|
|
# Read test pattern 0x91
|
|
qemu-io -c read -P 0x91 100M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-aes-256-cbc-essiv-auto-sha1
|
|
read 10485760/10485760 bytes at offset 104857600
|
|
10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
|
|
|
|
# Read test pattern 0x5e
|
|
qemu-io -c read -P 0x5e 3145728M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-aes-256-cbc-essiv-auto-sha1
|
|
read 10485760/10485760 bytes at offset 3298534883328
|
|
10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
|
|
|
|
# Close dev
|
|
sudo cryptsetup -q -v luksClose qiotest-145-aes-256-cbc-essiv-auto-sha1
|
|
# Delete image
|
|
unlink TEST_DIR/luks-aes-256-cbc-essiv-auto-sha1.img
|
|
|
|
# ================= dm-crypt aes-256-cbc-plain64-sha256-sha1 =================
|
|
# Create image
|
|
truncate TEST_DIR/luks-aes-256-cbc-plain64-sha256-sha1.img --size 4194304MB
|
|
# Format image
|
|
sudo cryptsetup -q -v luksFormat --cipher aes-cbc-plain64:sha256 --key-size 256 --hash sha1 --key-slot 0 --key-file - TEST_DIR/luks-aes-256-cbc-plain64-sha256-sha1.img
|
|
# Open dev
|
|
sudo cryptsetup -q -v luksOpen TEST_DIR/luks-aes-256-cbc-plain64-sha256-sha1.img qiotest-145-aes-256-cbc-plain64-sha256-sha1
|
|
# Set dev owner
|
|
sudo chown UID:GID /dev/mapper/qiotest-145-aes-256-cbc-plain64-sha256-sha1
|
|
# Write test pattern 0xa7
|
|
qemu-io -c write -P 0xa7 100M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-aes-256-cbc-plain64-sha256-sha1
|
|
wrote 10485760/10485760 bytes at offset 104857600
|
|
10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
|
|
|
|
# Write test pattern 0x13
|
|
qemu-io -c write -P 0x13 3145728M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-aes-256-cbc-plain64-sha256-sha1
|
|
wrote 10485760/10485760 bytes at offset 3298534883328
|
|
10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
|
|
|
|
# Close dev
|
|
sudo cryptsetup -q -v luksClose qiotest-145-aes-256-cbc-plain64-sha256-sha1
|
|
# Read test pattern 0xa7
|
|
qemu-io -c read -P 0xa7 100M 10M --object secret,id=sec0,data=MTIzNDU2,format=base64 --image-opts driver=luks,key-secret=sec0,file.filename=TEST_DIR/luks-aes-256-cbc-plain64-sha256-sha1.img
|
|
read 10485760/10485760 bytes at offset 104857600
|
|
10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
|
|
|
|
# Read test pattern 0x13
|
|
qemu-io -c read -P 0x13 3145728M 10M --object secret,id=sec0,data=MTIzNDU2,format=base64 --image-opts driver=luks,key-secret=sec0,file.filename=TEST_DIR/luks-aes-256-cbc-plain64-sha256-sha1.img
|
|
read 10485760/10485760 bytes at offset 3298534883328
|
|
10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
|
|
|
|
# Write test pattern 0x91
|
|
qemu-io -c write -P 0x91 100M 10M --object secret,id=sec0,data=MTIzNDU2,format=base64 --image-opts driver=luks,key-secret=sec0,file.filename=TEST_DIR/luks-aes-256-cbc-plain64-sha256-sha1.img
|
|
wrote 10485760/10485760 bytes at offset 104857600
|
|
10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
|
|
|
|
# Write test pattern 0x5e
|
|
qemu-io -c write -P 0x5e 3145728M 10M --object secret,id=sec0,data=MTIzNDU2,format=base64 --image-opts driver=luks,key-secret=sec0,file.filename=TEST_DIR/luks-aes-256-cbc-plain64-sha256-sha1.img
|
|
wrote 10485760/10485760 bytes at offset 3298534883328
|
|
10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
|
|
|
|
# Open dev
|
|
sudo cryptsetup -q -v luksOpen TEST_DIR/luks-aes-256-cbc-plain64-sha256-sha1.img qiotest-145-aes-256-cbc-plain64-sha256-sha1
|
|
# Set dev owner
|
|
sudo chown UID:GID /dev/mapper/qiotest-145-aes-256-cbc-plain64-sha256-sha1
|
|
# Read test pattern 0x91
|
|
qemu-io -c read -P 0x91 100M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-aes-256-cbc-plain64-sha256-sha1
|
|
read 10485760/10485760 bytes at offset 104857600
|
|
10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
|
|
|
|
# Read test pattern 0x5e
|
|
qemu-io -c read -P 0x5e 3145728M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-aes-256-cbc-plain64-sha256-sha1
|
|
read 10485760/10485760 bytes at offset 3298534883328
|
|
10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
|
|
|
|
# Close dev
|
|
sudo cryptsetup -q -v luksClose qiotest-145-aes-256-cbc-plain64-sha256-sha1
|
|
# Delete image
|
|
unlink TEST_DIR/luks-aes-256-cbc-plain64-sha256-sha1.img
|
|
|
|
# ================= qemu-img aes-256-cbc-plain64-sha256-sha1 =================
|
|
# Create image
|
|
qemu-img create -f luks --object secret,id=sec0,data=MTIzNDU2,format=base64 -o key-secret=sec0,cipher-alg=aes-256,cipher-mode=cbc,ivgen-alg=plain64,hash-alg=sha1,ivgen-hash-alg=sha256 TEST_DIR/luks-aes-256-cbc-plain64-sha256-sha1.img 4194304M
|
|
Formatting 'TEST_DIR/luks-aes-256-cbc-plain64-sha256-sha1.img', fmt=luks size=4398046511104 key-secret=sec0 cipher-alg=aes-256 cipher-mode=cbc ivgen-alg=plain64 ivgen-hash-alg=sha256 hash-alg=sha1
|
|
|
|
# Open dev
|
|
sudo cryptsetup -q -v luksOpen TEST_DIR/luks-aes-256-cbc-plain64-sha256-sha1.img qiotest-145-aes-256-cbc-plain64-sha256-sha1
|
|
# Set dev owner
|
|
sudo chown UID:GID /dev/mapper/qiotest-145-aes-256-cbc-plain64-sha256-sha1
|
|
# Write test pattern 0xa7
|
|
qemu-io -c write -P 0xa7 100M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-aes-256-cbc-plain64-sha256-sha1
|
|
wrote 10485760/10485760 bytes at offset 104857600
|
|
10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
|
|
|
|
# Write test pattern 0x13
|
|
qemu-io -c write -P 0x13 3145728M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-aes-256-cbc-plain64-sha256-sha1
|
|
wrote 10485760/10485760 bytes at offset 3298534883328
|
|
10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
|
|
|
|
# Close dev
|
|
sudo cryptsetup -q -v luksClose qiotest-145-aes-256-cbc-plain64-sha256-sha1
|
|
# Read test pattern 0xa7
|
|
qemu-io -c read -P 0xa7 100M 10M --object secret,id=sec0,data=MTIzNDU2,format=base64 --image-opts driver=luks,key-secret=sec0,file.filename=TEST_DIR/luks-aes-256-cbc-plain64-sha256-sha1.img
|
|
read 10485760/10485760 bytes at offset 104857600
|
|
10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
|
|
|
|
# Read test pattern 0x13
|
|
qemu-io -c read -P 0x13 3145728M 10M --object secret,id=sec0,data=MTIzNDU2,format=base64 --image-opts driver=luks,key-secret=sec0,file.filename=TEST_DIR/luks-aes-256-cbc-plain64-sha256-sha1.img
|
|
read 10485760/10485760 bytes at offset 3298534883328
|
|
10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
|
|
|
|
# Write test pattern 0x91
|
|
qemu-io -c write -P 0x91 100M 10M --object secret,id=sec0,data=MTIzNDU2,format=base64 --image-opts driver=luks,key-secret=sec0,file.filename=TEST_DIR/luks-aes-256-cbc-plain64-sha256-sha1.img
|
|
wrote 10485760/10485760 bytes at offset 104857600
|
|
10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
|
|
|
|
# Write test pattern 0x5e
|
|
qemu-io -c write -P 0x5e 3145728M 10M --object secret,id=sec0,data=MTIzNDU2,format=base64 --image-opts driver=luks,key-secret=sec0,file.filename=TEST_DIR/luks-aes-256-cbc-plain64-sha256-sha1.img
|
|
wrote 10485760/10485760 bytes at offset 3298534883328
|
|
10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
|
|
|
|
# Open dev
|
|
sudo cryptsetup -q -v luksOpen TEST_DIR/luks-aes-256-cbc-plain64-sha256-sha1.img qiotest-145-aes-256-cbc-plain64-sha256-sha1
|
|
# Set dev owner
|
|
sudo chown UID:GID /dev/mapper/qiotest-145-aes-256-cbc-plain64-sha256-sha1
|
|
# Read test pattern 0x91
|
|
qemu-io -c read -P 0x91 100M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-aes-256-cbc-plain64-sha256-sha1
|
|
read 10485760/10485760 bytes at offset 104857600
|
|
10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
|
|
|
|
# Read test pattern 0x5e
|
|
qemu-io -c read -P 0x5e 3145728M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-aes-256-cbc-plain64-sha256-sha1
|
|
read 10485760/10485760 bytes at offset 3298534883328
|
|
10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
|
|
|
|
# Close dev
|
|
sudo cryptsetup -q -v luksClose qiotest-145-aes-256-cbc-plain64-sha256-sha1
|
|
# Delete image
|
|
unlink TEST_DIR/luks-aes-256-cbc-plain64-sha256-sha1.img
|
|
|