mirror of
https://github.com/xemu-project/xemu.git
synced 2024-11-28 22:10:33 +00:00
979672cf51
The RTC is modeled to provide time and date functionality. It is initialised at zero to match the hardware. There is no modelling of the alarm functionality, which includes the IRQ line. As there is no guest code to exercise this function that is acceptable for now. Signed-off-by: Joel Stanley <joel@jms.id.au> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20190618165311.27066-4-clg@kaod.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
90 lines
5.3 KiB
Plaintext
90 lines
5.3 KiB
Plaintext
# See docs/devel/tracing.txt for syntax documentation.
|
|
|
|
# slavio_timer.c
|
|
slavio_timer_get_out(uint64_t limit, uint32_t counthigh, uint32_t count) "limit 0x%"PRIx64" count 0x%x0x%08x"
|
|
slavio_timer_irq(uint32_t counthigh, uint32_t count) "callback: count 0x%x0x%08x"
|
|
slavio_timer_mem_readl_invalid(uint64_t addr) "invalid read address 0x%"PRIx64
|
|
slavio_timer_mem_readl(uint64_t addr, uint32_t ret) "read 0x%"PRIx64" = 0x%08x"
|
|
slavio_timer_mem_writel(uint64_t addr, uint32_t val) "write 0x%"PRIx64" = 0x%08x"
|
|
slavio_timer_mem_writel_limit(unsigned int timer_index, uint64_t count) "processor %d user timer set to 0x%016"PRIx64
|
|
slavio_timer_mem_writel_counter_invalid(void) "not user timer"
|
|
slavio_timer_mem_writel_status_start(unsigned int timer_index) "processor %d user timer started"
|
|
slavio_timer_mem_writel_status_stop(unsigned int timer_index) "processor %d user timer stopped"
|
|
slavio_timer_mem_writel_mode_user(unsigned int timer_index) "processor %d changed from counter to user timer"
|
|
slavio_timer_mem_writel_mode_counter(unsigned int timer_index) "processor %d changed from user timer to counter"
|
|
slavio_timer_mem_writel_mode_invalid(void) "not system timer"
|
|
slavio_timer_mem_writel_invalid(uint64_t addr) "invalid write address 0x%"PRIx64
|
|
|
|
# grlib_gptimer.c
|
|
grlib_gptimer_enable(int id, uint32_t count) "timer:%d set count 0x%x and run"
|
|
grlib_gptimer_disabled(int id, uint32_t config) "timer:%d Timer disable config 0x%x"
|
|
grlib_gptimer_restart(int id, uint32_t reload) "timer:%d reload val: 0x%x"
|
|
grlib_gptimer_set_scaler(uint32_t scaler, uint32_t freq) "scaler:0x%x freq: 0x%x"
|
|
grlib_gptimer_hit(int id) "timer:%d HIT"
|
|
grlib_gptimer_readl(int id, uint64_t addr, uint32_t val) "timer:%d addr 0x%"PRIx64" 0x%x"
|
|
grlib_gptimer_writel(int id, uint64_t addr, uint32_t val) "timer:%d addr 0x%"PRIx64" 0x%x"
|
|
|
|
# lm32_timer.c
|
|
lm32_timer_memory_write(uint32_t addr, uint32_t value) "addr 0x%08x value 0x%08x"
|
|
lm32_timer_memory_read(uint32_t addr, uint32_t value) "addr 0x%08x value 0x%08x"
|
|
lm32_timer_hit(void) "timer hit"
|
|
lm32_timer_irq_state(int level) "irq state %d"
|
|
|
|
# milkymist-sysctl.c
|
|
milkymist_sysctl_memory_read(uint32_t addr, uint32_t value) "addr 0x%08x value 0x%08x"
|
|
milkymist_sysctl_memory_write(uint32_t addr, uint32_t value) "addr 0x%08x value 0x%08x"
|
|
milkymist_sysctl_icap_write(uint32_t value) "value 0x%08x"
|
|
milkymist_sysctl_start_timer0(void) "Start timer0"
|
|
milkymist_sysctl_stop_timer0(void) "Stop timer0"
|
|
milkymist_sysctl_start_timer1(void) "Start timer1"
|
|
milkymist_sysctl_stop_timer1(void) "Stop timer1"
|
|
milkymist_sysctl_pulse_irq_timer0(void) "Pulse IRQ Timer0"
|
|
milkymist_sysctl_pulse_irq_timer1(void) "Pulse IRQ Timer1"
|
|
|
|
# aspeed_timer.c
|
|
aspeed_timer_ctrl_enable(uint8_t i, bool enable) "Timer %" PRIu8 ": %d"
|
|
aspeed_timer_ctrl_external_clock(uint8_t i, bool enable) "Timer %" PRIu8 ": %d"
|
|
aspeed_timer_ctrl_overflow_interrupt(uint8_t i, bool enable) "Timer %" PRIu8 ": %d"
|
|
aspeed_timer_ctrl_pulse_enable(uint8_t i, bool enable) "Timer %" PRIu8 ": %d"
|
|
aspeed_timer_set_ctrl2(uint32_t value) "Value: 0x%" PRIx32
|
|
aspeed_timer_set_value(int timer, int reg, uint32_t value) "Timer %d register %d: 0x%" PRIx32
|
|
aspeed_timer_read(uint64_t offset, unsigned size, uint64_t value) "From 0x%" PRIx64 ": of size %u: 0x%" PRIx64
|
|
|
|
# armv7m_systick.c
|
|
systick_reload(void) "systick reload"
|
|
systick_timer_tick(void) "systick reload"
|
|
systick_read(uint64_t addr, uint32_t value, unsigned size) "systick read addr 0x%" PRIx64 " data 0x%" PRIx32 " size %u"
|
|
systick_write(uint64_t addr, uint32_t value, unsigned size) "systick write addr 0x%" PRIx64 " data 0x%" PRIx32 " size %u"
|
|
|
|
# cmsdk-apb-timer.c
|
|
cmsdk_apb_timer_read(uint64_t offset, uint64_t data, unsigned size) "CMSDK APB timer read: offset 0x%" PRIx64 " data 0x%" PRIx64 " size %u"
|
|
cmsdk_apb_timer_write(uint64_t offset, uint64_t data, unsigned size) "CMSDK APB timer write: offset 0x%" PRIx64 " data 0x%" PRIx64 " size %u"
|
|
cmsdk_apb_timer_reset(void) "CMSDK APB timer: reset"
|
|
|
|
# cmsdk-apb-dualtimer.c
|
|
cmsdk_apb_dualtimer_read(uint64_t offset, uint64_t data, unsigned size) "CMSDK APB dualtimer read: offset 0x%" PRIx64 " data 0x%" PRIx64 " size %u"
|
|
cmsdk_apb_dualtimer_write(uint64_t offset, uint64_t data, unsigned size) "CMSDK APB dualtimer write: offset 0x%" PRIx64 " data 0x%" PRIx64 " size %u"
|
|
cmsdk_apb_dualtimer_reset(void) "CMSDK APB dualtimer: reset"
|
|
|
|
# hw/timer/aspeed-rtc.c
|
|
aspeed_rtc_read(uint64_t addr, uint64_t value) "addr 0x%02" PRIx64 " value 0x%08" PRIx64
|
|
aspeed_rtc_write(uint64_t addr, uint64_t value) "addr 0x%02" PRIx64 " value 0x%08" PRIx64
|
|
|
|
# sun4v-rtc.c
|
|
sun4v_rtc_read(uint64_t addr, uint64_t value) "read: addr 0x%" PRIx64 " value 0x%" PRIx64
|
|
sun4v_rtc_write(uint64_t addr, uint64_t value) "write: addr 0x%" PRIx64 " value 0x%" PRIx64
|
|
|
|
# xlnx-zynqmp-rtc.c
|
|
xlnx_zynqmp_rtc_gettime(int year, int month, int day, int hour, int min, int sec) "Get time from host: %d-%d-%d %2d:%02d:%02d"
|
|
|
|
# nrf51_timer.c
|
|
nrf51_timer_read(uint64_t addr, uint32_t value, unsigned size) "read addr 0x%" PRIx64 " data 0x%" PRIx32 " size %u"
|
|
nrf51_timer_write(uint64_t addr, uint32_t value, unsigned size) "write addr 0x%" PRIx64 " data 0x%" PRIx32 " size %u"
|
|
|
|
# pl031.c
|
|
pl031_irq_state(int level) "irq state %d"
|
|
pl031_read(uint32_t addr, uint32_t value) "addr 0x%08x value 0x%08x"
|
|
pl031_write(uint32_t addr, uint32_t value) "addr 0x%08x value 0x%08x"
|
|
pl031_alarm_raised(void) "alarm raised"
|
|
pl031_set_alarm(uint32_t ticks) "alarm set for %u ticks"
|