xemu/hw/sparc32_dma.c
bellard 67e999be93 Separate the DMA controllers - Convert ESP to new DMA methods (Blue Swirl)
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@2143 c046a42c-6fe2-441c-8c8c-71466251a162
2006-09-03 16:09:07 +00:00

250 lines
6.6 KiB
C

/*
* QEMU Sparc32 DMA controller emulation
*
* Copyright (c) 2006 Fabrice Bellard
*
* Permission is hereby granted, free of charge, to any person obtaining a copy
* of this software and associated documentation files (the "Software"), to deal
* in the Software without restriction, including without limitation the rights
* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
* copies of the Software, and to permit persons to whom the Software is
* furnished to do so, subject to the following conditions:
*
* The above copyright notice and this permission notice shall be included in
* all copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
* THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
* LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
* OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
* THE SOFTWARE.
*/
#include "vl.h"
/* debug DMA */
//#define DEBUG_DMA
/*
* This is the DMA controller part of chip STP2000 (Master I/O), also
* produced as NCR89C100. See
* http://www.ibiblio.org/pub/historic-linux/early-ports/Sparc/NCR/NCR89C100.txt
* and
* http://www.ibiblio.org/pub/historic-linux/early-ports/Sparc/NCR/DMA2.txt
*/
#ifdef DEBUG_DMA
#define DPRINTF(fmt, args...) \
do { printf("DMA: " fmt , ##args); } while (0)
#define pic_set_irq_new(ctl, irq, level) \
do { printf("DMA: set_irq(%d): %d\n", (irq), (level)); \
pic_set_irq_new((ctl), (irq),(level));} while (0)
#else
#define DPRINTF(fmt, args...)
#endif
#define DMA_REGS 8
#define DMA_MAXADDR (DMA_REGS * 4 - 1)
#define DMA_VER 0xa0000000
#define DMA_INTR 1
#define DMA_INTREN 0x10
#define DMA_WRITE_MEM 0x100
#define DMA_LOADED 0x04000000
#define DMA_RESET 0x80
typedef struct DMAState DMAState;
struct DMAState {
uint32_t dmaregs[DMA_REGS];
int espirq, leirq;
void *iommu, *esp_opaque, *lance_opaque, *intctl;
};
void ledma_set_irq(void *opaque, int isr)
{
DMAState *s = opaque;
pic_set_irq_new(s->intctl, s->leirq, isr);
}
void ledma_memory_read(void *opaque, target_phys_addr_t addr, uint8_t *buf, int len)
{
DMAState *s = opaque;
DPRINTF("DMA write, direction: %c, addr 0x%8.8x\n",
s->dmaregs[0] & DMA_WRITE_MEM ? 'w': 'r', s->dmaregs[1]);
sparc_iommu_memory_read(s->iommu, addr | s->dmaregs[7], buf, len);
}
void ledma_memory_write(void *opaque, target_phys_addr_t addr, uint8_t *buf, int len)
{
DMAState *s = opaque;
DPRINTF("DMA read, direction: %c, addr 0x%8.8x\n",
s->dmaregs[0] & DMA_WRITE_MEM ? 'w': 'r', s->dmaregs[1]);
sparc_iommu_memory_write(s->iommu, addr | s->dmaregs[7], buf, len);
}
void espdma_raise_irq(void *opaque)
{
DMAState *s = opaque;
s->dmaregs[0] |= DMA_INTR;
pic_set_irq_new(s->intctl, s->espirq, 1);
}
void espdma_clear_irq(void *opaque)
{
DMAState *s = opaque;
s->dmaregs[0] &= ~DMA_INTR;
pic_set_irq_new(s->intctl, s->espirq, 0);
}
void espdma_memory_read(void *opaque, uint8_t *buf, int len)
{
DMAState *s = opaque;
DPRINTF("DMA read, direction: %c, addr 0x%8.8x\n",
s->dmaregs[0] & DMA_WRITE_MEM ? 'w': 'r', s->dmaregs[1]);
sparc_iommu_memory_read(s->iommu, s->dmaregs[1], buf, len);
s->dmaregs[0] |= DMA_INTR;
s->dmaregs[1] += len;
}
void espdma_memory_write(void *opaque, uint8_t *buf, int len)
{
DMAState *s = opaque;
DPRINTF("DMA write, direction: %c, addr 0x%8.8x\n",
s->dmaregs[0] & DMA_WRITE_MEM ? 'w': 'r', s->dmaregs[1]);
sparc_iommu_memory_write(s->iommu, s->dmaregs[1], buf, len);
s->dmaregs[0] |= DMA_INTR;
s->dmaregs[1] += len;
}
static uint32_t dma_mem_readl(void *opaque, target_phys_addr_t addr)
{
DMAState *s = opaque;
uint32_t saddr;
saddr = (addr & DMA_MAXADDR) >> 2;
DPRINTF("read dmareg[%d]: 0x%8.8x\n", saddr, s->dmaregs[saddr]);
return s->dmaregs[saddr];
}
static void dma_mem_writel(void *opaque, target_phys_addr_t addr, uint32_t val)
{
DMAState *s = opaque;
uint32_t saddr;
saddr = (addr & DMA_MAXADDR) >> 2;
DPRINTF("write dmareg[%d]: 0x%8.8x -> 0x%8.8x\n", saddr, s->dmaregs[saddr], val);
switch (saddr) {
case 0:
if (!(val & DMA_INTREN))
pic_set_irq_new(s->intctl, s->espirq, 0);
if (val & DMA_RESET) {
esp_reset(s->esp_opaque);
} else if (val & 0x40) {
val &= ~0x40;
} else if (val == 0)
val = 0x40;
val &= 0x0fffffff;
val |= DMA_VER;
break;
case 1:
s->dmaregs[0] |= DMA_LOADED;
break;
case 4:
if (!(val & DMA_INTREN))
pic_set_irq_new(s->intctl, s->leirq, 0);
if (val & DMA_RESET)
pcnet_h_reset(s->lance_opaque);
val &= 0x0fffffff;
val |= DMA_VER;
break;
default:
break;
}
s->dmaregs[saddr] = val;
}
static CPUReadMemoryFunc *dma_mem_read[3] = {
dma_mem_readl,
dma_mem_readl,
dma_mem_readl,
};
static CPUWriteMemoryFunc *dma_mem_write[3] = {
dma_mem_writel,
dma_mem_writel,
dma_mem_writel,
};
static void dma_reset(void *opaque)
{
DMAState *s = opaque;
memset(s->dmaregs, 0, DMA_REGS * 4);
s->dmaregs[0] = DMA_VER;
s->dmaregs[4] = DMA_VER;
}
static void dma_save(QEMUFile *f, void *opaque)
{
DMAState *s = opaque;
unsigned int i;
for (i = 0; i < DMA_REGS; i++)
qemu_put_be32s(f, &s->dmaregs[i]);
}
static int dma_load(QEMUFile *f, void *opaque, int version_id)
{
DMAState *s = opaque;
unsigned int i;
if (version_id != 1)
return -EINVAL;
for (i = 0; i < DMA_REGS; i++)
qemu_get_be32s(f, &s->dmaregs[i]);
return 0;
}
void *sparc32_dma_init(uint32_t daddr, int espirq, int leirq, void *iommu, void *intctl)
{
DMAState *s;
int dma_io_memory;
s = qemu_mallocz(sizeof(DMAState));
if (!s)
return NULL;
s->espirq = espirq;
s->leirq = leirq;
s->iommu = iommu;
s->intctl = intctl;
dma_io_memory = cpu_register_io_memory(0, dma_mem_read, dma_mem_write, s);
cpu_register_physical_memory(daddr, 16 * 2, dma_io_memory);
register_savevm("sparc32_dma", daddr, 1, dma_save, dma_load, s);
qemu_register_reset(dma_reset, s);
return s;
}
void sparc32_dma_set_reset_data(void *opaque, void *esp_opaque,
void *lance_opaque)
{
DMAState *s = opaque;
s->esp_opaque = esp_opaque;
s->lance_opaque = lance_opaque;
}