xemu/hw/arm/gumstix.c
Alistair Francis c0dbca36dc hw/arm: Replace fprintf(stderr, "*\n" with error_report()
Replace a large number of the fprintf(stderr, "*\n" calls with
error_report(). The functions were renamed with these commands and then
compiler issues where manually fixed.

find ./* -type f -exec sed -i \
    'N;N;N;N;N;N;N;N;N;N;N;N; {s|fprintf(stderr, "\(.*\)\\n"\(.*\));|error_report("\1"\2);|Ig}' \
    {} +
find ./* -type f -exec sed -i \
    'N;N;N;N;N;N;N;N;N;N;N; {s|fprintf(stderr, "\(.*\)\\n"\(.*\));|error_report("\1"\2);|Ig}' \
    {} +
find ./* -type f -exec sed -i \
    'N;N;N;N;N;N;N;N;N; {s|fprintf(stderr, "\(.*\)\\n"\(.*\));|error_report("\1"\2);|Ig}' \
    {} +
find ./* -type f -exec sed -i \
    'N;N;N;N;N;N;N;N; {s|fprintf(stderr, "\(.*\)\\n"\(.*\));|error_report("\1"\2);|Ig}' \
    {} +
find ./* -type f -exec sed -i \
    'N;N;N;N;N;N;N; {s|fprintf(stderr, "\(.*\)\\n"\(.*\));|error_report("\1"\2);|Ig}' \
    {} +
find ./* -type f -exec sed -i \
    'N;N;N;N;N;N; {s|fprintf(stderr, "\(.*\)\\n"\(.*\));|error_report("\1"\2);|Ig}' \
    {} +
find ./* -type f -exec sed -i \
    'N;N;N;N;N; {s|fprintf(stderr, "\(.*\)\\n"\(.*\));|error_report("\1"\2);|Ig}' \
    {} +
find ./* -type f -exec sed -i \
    'N;N;N;N; {s|fprintf(stderr, "\(.*\)\\n"\(.*\));|error_report("\1"\2);|Ig}' \
    {} +
find ./* -type f -exec sed -i \
    'N;N;N; {s|fprintf(stderr, "\(.*\)\\n"\(.*\));|error_report("\1"\2);|Ig}' \
    {} +
find ./* -type f -exec sed -i \
    'N;N; {s|fprintf(stderr, "\(.*\)\\n"\(.*\));|error_report("\1"\2);|Ig}' \
    {} +
find ./* -type f -exec sed -i \
    'N; {s|fprintf(stderr, "\(.*\)\\n"\(.*\));|error_report("\1"\2);|Ig}' \
    {} +

Some lines where then manually tweaked to pass checkpatch.

The 'qemu: ' prefix was manually removed from the hw/arm/boot.c file.

Signed-off-by: Alistair Francis <alistair.francis@xilinx.com>
Cc: qemu-arm@nongnu.org

Conversions that aren't followed by exit() dropped, because they might
be inappropriate.

Also trim trailing punctuation from error messages.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20180203084315.20497-3-armbru@redhat.com>
2018-02-06 18:26:42 +01:00

164 lines
4.4 KiB
C

/*
* Gumstix Platforms
*
* Copyright (c) 2007 by Thorsten Zitterell <info@bitmux.org>
*
* Code based on spitz platform by Andrzej Zaborowski <balrog@zabor.org>
*
* This code is licensed under the GNU GPL v2.
*
* Contributions after 2012-01-13 are licensed under the terms of the
* GNU GPL, version 2 or (at your option) any later version.
*/
/*
* Example usage:
*
* connex:
* =======
* create image:
* # dd of=flash bs=1k count=16k if=/dev/zero
* # dd of=flash bs=1k conv=notrunc if=u-boot.bin
* # dd of=flash bs=1k conv=notrunc seek=256 if=rootfs.arm_nofpu.jffs2
* start it:
* # qemu-system-arm -M connex -pflash flash -monitor null -nographic
*
* verdex:
* =======
* create image:
* # dd of=flash bs=1k count=32k if=/dev/zero
* # dd of=flash bs=1k conv=notrunc if=u-boot.bin
* # dd of=flash bs=1k conv=notrunc seek=256 if=rootfs.arm_nofpu.jffs2
* # dd of=flash bs=1k conv=notrunc seek=31744 if=uImage
* start it:
* # qemu-system-arm -M verdex -pflash flash -monitor null -nographic -m 289
*/
#include "qemu/osdep.h"
#include "qemu/error-report.h"
#include "hw/hw.h"
#include "hw/arm/pxa.h"
#include "net/net.h"
#include "hw/block/flash.h"
#include "hw/devices.h"
#include "hw/boards.h"
#include "sysemu/block-backend.h"
#include "exec/address-spaces.h"
#include "sysemu/qtest.h"
#include "cpu.h"
static const int sector_len = 128 * 1024;
static void connex_init(MachineState *machine)
{
PXA2xxState *cpu;
DriveInfo *dinfo;
int be;
MemoryRegion *address_space_mem = get_system_memory();
uint32_t connex_rom = 0x01000000;
uint32_t connex_ram = 0x04000000;
cpu = pxa255_init(address_space_mem, connex_ram);
dinfo = drive_get(IF_PFLASH, 0, 0);
if (!dinfo && !qtest_enabled()) {
error_report("A flash image must be given with the "
"'pflash' parameter");
exit(1);
}
#ifdef TARGET_WORDS_BIGENDIAN
be = 1;
#else
be = 0;
#endif
if (!pflash_cfi01_register(0x00000000, NULL, "connext.rom", connex_rom,
dinfo ? blk_by_legacy_dinfo(dinfo) : NULL,
sector_len, connex_rom / sector_len,
2, 0, 0, 0, 0, be)) {
error_report("Error registering flash memory");
exit(1);
}
/* Interrupt line of NIC is connected to GPIO line 36 */
smc91c111_init(&nd_table[0], 0x04000300,
qdev_get_gpio_in(cpu->gpio, 36));
}
static void verdex_init(MachineState *machine)
{
PXA2xxState *cpu;
DriveInfo *dinfo;
int be;
MemoryRegion *address_space_mem = get_system_memory();
uint32_t verdex_rom = 0x02000000;
uint32_t verdex_ram = 0x10000000;
cpu = pxa270_init(address_space_mem, verdex_ram, machine->cpu_type);
dinfo = drive_get(IF_PFLASH, 0, 0);
if (!dinfo && !qtest_enabled()) {
error_report("A flash image must be given with the "
"'pflash' parameter");
exit(1);
}
#ifdef TARGET_WORDS_BIGENDIAN
be = 1;
#else
be = 0;
#endif
if (!pflash_cfi01_register(0x00000000, NULL, "verdex.rom", verdex_rom,
dinfo ? blk_by_legacy_dinfo(dinfo) : NULL,
sector_len, verdex_rom / sector_len,
2, 0, 0, 0, 0, be)) {
error_report("Error registering flash memory");
exit(1);
}
/* Interrupt line of NIC is connected to GPIO line 99 */
smc91c111_init(&nd_table[0], 0x04000300,
qdev_get_gpio_in(cpu->gpio, 99));
}
static void connex_class_init(ObjectClass *oc, void *data)
{
MachineClass *mc = MACHINE_CLASS(oc);
mc->desc = "Gumstix Connex (PXA255)";
mc->init = connex_init;
mc->ignore_memory_transaction_failures = true;
}
static const TypeInfo connex_type = {
.name = MACHINE_TYPE_NAME("connex"),
.parent = TYPE_MACHINE,
.class_init = connex_class_init,
};
static void verdex_class_init(ObjectClass *oc, void *data)
{
MachineClass *mc = MACHINE_CLASS(oc);
mc->desc = "Gumstix Verdex (PXA270)";
mc->init = verdex_init;
mc->ignore_memory_transaction_failures = true;
mc->default_cpu_type = ARM_CPU_TYPE_NAME("pxa270-c0");
}
static const TypeInfo verdex_type = {
.name = MACHINE_TYPE_NAME("verdex"),
.parent = TYPE_MACHINE,
.class_init = verdex_class_init,
};
static void gumstix_machine_init(void)
{
type_register_static(&connex_type);
type_register_static(&verdex_type);
}
type_init(gumstix_machine_init)