Alexander Graf 83ad95957c pl031: Expose RTCICR as proper WC register ... The current PL031 RTCICR register implementation always clears the IRQ pending status on a register write, regardless of the value the guest writes. To justify that behavior, it references the ARM926EJ-S Development Chip Reference Manual (DDI0287B) and indicates that said document states that any write clears the internal IRQ state. It is indeed true that in section 11.1 this document says: "The interrupt is cleared by writing any data value to the interrupt clear register RTCICR". However, later in section 11.2.2 it contradicts itself by saying: "Writing 1 to bit 0 of RTCICR clears the RTCINTR flag." The latter statement matches the PL031 TRM (DDI0224C), which says: "Writing 1 to bit position 0 clears the corresponding interrupt. Writing 0 has no effect." Let's assume that the self-contradictory DDI0287B is in error, and follow the reference manual for the device itself, by making the register write-one-to-clear. Reported-by: Hendrik Borghorst <hborghor@amazon.de> Signed-off-by: Alexander Graf <graf@amazon.com> Message-id: 20191104115228.30745-1-graf@amazon.com [PMM: updated commit message to note that DDI0287B says two conflicting things] Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>		2019-11-19 13:20:27 +00:00
..
9pfs	9p: Use variable length suffixes for inode remapping	2019-10-10 11:36:23 +02:00
acpi	hw/pci-host/piix: Move i440FX declarations to hw/pci-host/i440fx.h	2019-11-05 23:33:12 +01:00
adc	Include hw/hw.h exactly where needed	2019-08-16 13:31:52 +02:00
alpha	hw: Move MC146818 device from hw/timer/ to hw/rtc/ subdirectory	2019-10-24 20:13:10 +02:00
arm	hw/arm/boot: Set NSACR.{CP11, CP10} in dummy SMC setup routine	2019-11-11 13:44:16 +00:00
audio	audio: remove audio_MIN, audio_MAX	2019-08-21 09:13:37 +02:00
block	bootdevice: Gather LCHS from all relevant devices	2019-10-31 11:47:29 -04:00
bt	Include qemu-common.h exactly where needed	2019-06-12 13:20:20 +02:00
char	virtio: basic packed virtqueue support	2019-10-25 07:46:22 -04:00
core	numa: Add missing \n to error message	2019-11-12 10:34:23 +01:00
cpu	hw/core: Move cpu.c, cpu.h from qom/ to hw/core/	2019-08-21 13:24:01 +02:00
cris	Include hw/hw.h exactly where needed	2019-08-16 13:31:52 +02:00
display	hw/m68k: add Nubus macfb video card	2019-10-28 19:06:49 +01:00
dma	hw/dma/xilinx_axidma.c: Switch to transaction-based ptimer API	2019-10-24 17:16:29 +01:00
gpio	hw/gpio: Fix property accessors of the AST2600 GPIO 1.8V model	2019-10-24 17:16:27 +01:00
hppa	hw: Move MC146818 device from hw/timer/ to hw/rtc/ subdirectory	2019-10-24 20:13:10 +02:00
hyperv	Include hw/qdev-properties.h less	2019-08-16 13:31:53 +02:00
i2c	aspeed/i2c: Add AST2600 support	2019-10-15 18:09:04 +01:00
i386	virtio, pci: fixes	2019-11-07 11:56:19 +00:00
ide	bootdevice: Gather LCHS from all relevant devices	2019-10-31 11:47:29 -04:00
input	hw/input/lm832x: Convert reset handler to DeviceReset	2019-10-15 18:18:08 -03:00
intc	ppc patch queue 2019-11-15	2019-11-18 11:09:06 +00:00
ipack	Include hw/qdev-properties.h less	2019-08-16 13:31:53 +02:00
ipmi	ipmi: Add an SMBus IPMI interface	2019-09-20 14:08:10 -05:00
isa	hw/pci-host/piix: Extract PIIX3 functions to hw/isa/piix3.c	2019-11-05 23:33:12 +01:00
lm32	Include hw/qdev-properties.h less	2019-08-16 13:31:53 +02:00
m68k	q800: fix I/O memory map	2019-11-05 18:52:29 +01:00
mem	memory-device: simplify Makefile.objs conditions	2019-10-22 09:38:42 +02:00
microblaze	microblaze: fix leak of fdevice tree blob	2019-10-04 18:49:16 +02:00
mips	hw/pci-host/piix: Define and use the PIIX IRQ Route Control Registers	2019-11-05 23:33:12 +01:00
misc	ppc patch queue 2019-11-15	2019-11-18 11:09:06 +00:00
moxie	Include hw/hw.h exactly where needed	2019-08-16 13:31:52 +02:00
net	dp8393x: fix dp8393x_receive()	2019-11-08 21:32:31 +01:00
nios2	Clean up inclusion of sysemu/sysemu.h	2019-08-16 13:31:53 +02:00
nubus	hw/m68k: add Nubus support	2019-10-28 19:06:47 +01:00
nvram	Fix the fw_cfg reboot-timeout=-1 special value, add a test for it.	2019-11-05 20:17:11 +00:00
openrisc	Include hw/qdev-properties.h less	2019-08-16 13:31:53 +02:00
pci	pci: Use PCI aliases when determining device IOMMU address space	2019-11-05 04:04:21 -05:00
pci-bridge	numa: move numa global variable nb_numa_nodes into MachineState	2019-09-03 11:26:55 -03:00
pci-host	hw/pci-host/i440fx: Remove the last PIIX3 traces	2019-11-05 23:33:12 +01:00
pcmcia	Include hw/hw.h exactly where needed	2019-08-16 13:31:52 +02:00
ppc	spapr: Add /chosen to FDT only at reset time to preserve kernel and initramdisk	2019-11-18 11:50:33 +01:00
rdma	hw/rdma: Utilize ibv_reg_mr_iova for memory registration	2019-11-06 12:49:04 +02:00
riscv	riscv/virt: Increase flash size	2019-11-14 09:53:28 -08:00
rtc	pl031: Expose RTCICR as proper WC register	2019-11-19 13:20:27 +00:00
s390x	target/s390x: Remove ilen parameter from s390_program_interrupt	2019-10-09 12:49:01 +02:00
scsi	bootdevice: Gather LCHS from all relevant devices	2019-10-31 11:47:29 -04:00
sd	hw/sd/sdhci: Add dummy Samsung SDHCI controller	2019-10-22 17:44:00 +01:00
semihosting	Clean up inclusion of sysemu/sysemu.h	2019-08-16 13:31:53 +02:00
sh4	sysemu: Split sysemu/runstate.h off sysemu/sysemu.h	2019-08-16 13:37:36 +02:00
smbios	smbios:ipmi: Ignore IPMI devices with no fwinfo function	2019-09-20 14:08:10 -05:00
sparc	hw: Move M48T59 device from hw/timer/ to hw/rtc/ subdirectory	2019-10-24 20:20:45 +02:00
sparc64	hw: Move sun4v hypervisor RTC from hw/timer/ to hw/rtc/ subdirectory	2019-10-24 20:23:15 +02:00
ssi	aspeed/smc: Add AST2600 support	2019-10-15 18:09:04 +01:00
timer	hw/i386: Remove obsolete LoadStateHandler::load_state_old handlers	2019-11-05 23:33:12 +01:00
tpm	Include hw/qdev-properties.h less	2019-08-16 13:31:53 +02:00
tricore	Clean up inclusion of sysemu/sysemu.h	2019-08-16 13:31:53 +02:00
unicore32	Include hw/irq.h a lot less	2019-08-16 13:31:52 +02:00
usb	usb-host: add option to allow all resets.	2019-11-06 13:26:04 +01:00
vfio	vfio: vfio-pci requires EDID	2019-11-18 10:41:49 -07:00
virtio	virtio: notify virtqueue via host notifier when available	2019-11-06 06:35:00 -05:00
watchdog	hw: wdt_aspeed: Add AST2600 support	2019-10-15 18:09:04 +01:00
xen	xen-bus: only set the xen device frontend state if it is missing	2019-09-24 12:21:29 +01:00
xenpv	Include sysemu/sysemu.h a lot less	2019-08-16 13:31:53 +02:00
xtensa	hw/xtensa: add virt machine	2019-10-18 20:38:10 -07:00
Kconfig	Add Macintosh Quadra 800 machine in hw/m68k	2019-10-29 16:27:48 +00:00
Makefile.objs	Add Macintosh Quadra 800 machine in hw/m68k	2019-10-29 16:27:48 +00:00