..
allwinner-a10.c
hw/sd/allwinner-sdhost: Use AddressSpace for DMA transfers
2020-08-28 10:02:45 +01:00
allwinner-h3.c
target-arm queue:
2020-08-28 15:14:40 +01:00
armsse.c
hw/arm/armsse: Correct expansion MPC interrupt lines
2020-11-10 11:03:48 +00:00
armv7m.c
load_elf: Remove unused address variables from callers
2020-09-25 16:52:08 -07:00
aspeed_ast2600.c
ast2600: SRAM is 89KB
2020-12-10 12:11:03 +01:00
aspeed_soc.c
hw/arm/aspeed: Map the UART5 device unconditionally
2020-09-18 09:04:36 +02:00
aspeed.c
aspeed: g220a-bmc: Add an FRU
2020-12-10 12:11:03 +01:00
bcm2835_peripherals.c
hw/arm/bcm2835_peripherals: connect the UART clock
2020-10-27 11:10:44 +00:00
bcm2836.c
hw/arm/bcm2836: Introduce the BCM2835 SoC
2020-10-27 11:10:44 +00:00
boot.c
hw/arm/boot: fix SVE for EL3 direct kernel boot
2020-11-02 16:52:16 +00:00
collie.c
Use OBJECT_DECLARE_SIMPLE_TYPE when possible
2020-09-18 14:12:32 -04:00
cubieboard.c
qom: Use returned bool to check for failure, Coccinelle part
2020-07-10 15:18:08 +02:00
digic_boards.c
qdev: Use returned bool to check for qdev_realize() etc. failure
2020-07-10 15:01:06 +02:00
digic.c
error: Eliminate error_propagate() with Coccinelle, part 1
2020-07-10 15:18:08 +02:00
exynos4_boards.c
sysbus: Convert qdev_set_parent_bus() use with Coccinelle, part 1
2020-06-15 22:06:04 +02:00
exynos4210.c
qom: simplify object_find_property / object_class_find_property
2020-09-22 16:45:16 -04:00
fsl-imx6.c
Add the ability to change the FEC PHY MDIO device number on i.MX6 processor
2020-07-13 14:36:08 +01:00
fsl-imx6ul.c
qom: Put name parameter before value / visitor parameter
2020-07-10 15:18:08 +02:00
fsl-imx7.c
Add the ability to change the FEC PHY MDIO devices numbers on i.MX7 processor
2020-07-13 14:36:08 +01:00
fsl-imx25.c
Add the ability to change the FEC PHY MDIO device number on i.MX25 processor
2020-07-13 14:36:07 +01:00
fsl-imx31.c
error: Eliminate error_propagate() with Coccinelle, part 1
2020-07-10 15:18:08 +02:00
gumstix.c
hw/arm/gumstix: Simplify since the machines are little-endian only
2020-03-05 16:09:14 +00:00
highbank.c
hw/arm/highbank: Silence warnings about missing fallthrough statements
2020-10-27 10:44:03 +00:00
imx25_pdk.c
qdev: Make qdev_prop_set_drive() match the other helpers
2020-06-23 16:07:07 +02:00
integratorcp.c
qom: simplify object_find_property / object_class_find_property
2020-09-22 16:45:16 -04:00
Kconfig
hw/misc: add an EMC141{3,4} device model
2020-12-10 12:11:03 +01:00
kzm.c
qdev: Convert bus-less devices to qdev_realize() with Coccinelle
2020-06-15 22:06:04 +02:00
mainstone.c
hw/arm: Use memory_region_init_rom() with read-only regions
2020-03-17 15:18:46 +01:00
mcimx6ul-evk.c
qom: Put name parameter before value / visitor parameter
2020-07-10 15:18:08 +02:00
mcimx7d-sabre.c
qdev: Make qdev_prop_set_drive() match the other helpers
2020-06-23 16:07:07 +02:00
meson.build
hw/arm: Add two NPCM7xx-based machines
2020-09-14 14:24:58 +01:00
microbit.c
Use OBJECT_DECLARE_SIMPLE_TYPE when possible
2020-09-18 14:12:32 -04:00
mps2-tz.c
Use OBJECT_DECLARE_TYPE when possible
2020-09-18 14:12:32 -04:00
mps2.c
Use OBJECT_DECLARE_TYPE when possible
2020-09-18 14:12:32 -04:00
msf2-soc.c
msf2-soc, stellaris: Don't wire up SYSRESETREQ
2020-08-03 17:55:03 +01:00
msf2-som.c
qdev: Make qdev_prop_set_drive() match the other helpers
2020-06-23 16:07:07 +02:00
musca.c
Use OBJECT_DECLARE_TYPE when possible
2020-09-18 14:12:32 -04:00
musicpal.c
hw/arm/musicpal: Only use qdev_get_gpio_in() when necessary
2020-11-10 11:03:48 +00:00
netduino2.c
hw/arm/netduino2, netduinoplus2: Set system_clock_scale
2020-08-03 17:55:03 +01:00
netduinoplus2.c
hw/arm/netduino2, netduinoplus2: Set system_clock_scale
2020-08-03 17:55:03 +01:00
npcm7xx_boards.c
hw/arm: Wire up BMC boot flash for npcm750-evb and quanta-gsj
2020-09-14 14:24:59 +01:00
npcm7xx.c
hw/gpio: Add GPIO model for Nuvoton NPCM7xx
2020-10-27 11:10:32 +00:00
nrf51_soc.c
hw/arm/nrf51_soc: Set system_clock_scale
2020-08-03 17:55:31 +01:00
nseries.c
hw/arm/nseries: Check return value from load_image_targphys()
2020-11-10 11:03:48 +00:00
omap1.c
hw/arm/omap1:Remove redundant statement in omap_clkdsp_read()
2020-09-01 11:53:44 +02:00
omap2.c
sysbus: Convert to sysbus_realize() etc. with Coccinelle
2020-06-15 22:05:28 +02:00
omap_sx1.c
hw/arm: Use memory_region_init_rom() with read-only regions
2020-03-17 15:18:46 +01:00
orangepi.c
allwinner-h3: Rename memmap enum constants
2020-08-27 14:04:54 -04:00
palm.c
Use OBJECT_DECLARE_SIMPLE_TYPE when possible
2020-09-18 14:12:32 -04:00
pxa2xx_gpio.c
Use OBJECT_DECLARE_SIMPLE_TYPE when possible
2020-09-18 14:12:32 -04:00
pxa2xx_pic.c
Use OBJECT_DECLARE_SIMPLE_TYPE when possible
2020-09-18 14:12:32 -04:00
pxa2xx.c
hw/arm: Fix bad print format specifiers
2020-11-23 10:41:58 +00:00
raspi.c
hw/arm/raspi: Add the Raspberry Pi 3 model A+
2020-10-27 11:10:44 +00:00
realview.c
qom: simplify object_find_property / object_class_find_property
2020-09-22 16:45:16 -04:00
sabrelite.c
qdev: Make qdev_prop_set_drive() match the other helpers
2020-06-23 16:07:07 +02:00
sbsa-ref.c
hw/arm/sbsa-ref: add SBSA watchdog device
2020-10-27 11:10:44 +00:00
smmu-common.c
memory: Add IOMMUTLBEvent
2020-12-08 13:48:57 -05:00
smmu-internal.h
hw/arm/smmu-common: Manage IOTLB block entries
2020-08-24 10:02:06 +01:00
smmuv3-internal.h
hw/arm/smmuv3: Advertise SMMUv3.2 range invalidation
2020-08-24 10:02:06 +01:00
smmuv3.c
memory: Add IOMMUTLBEvent
2020-12-08 13:48:57 -05:00
spitz.c
hw/arm: Fix bad print format specifiers
2020-11-23 10:41:58 +00:00
stellaris.c
Use OBJECT_DECLARE_SIMPLE_TYPE when possible
2020-09-18 14:12:32 -04:00
stm32f205_soc.c
hw/misc/stm32f2xx_syscfg: Remove extraneous IRQ
2020-11-10 11:03:48 +00:00
stm32f405_soc.c
error: Eliminate error_propagate() with Coccinelle, part 1
2020-07-10 15:18:08 +02:00
strongarm.c
hw/arm/strongarm: Fix 'time to transmit a char' unit comment
2020-10-20 16:12:00 +01:00
strongarm.h
hw/arm/collie: Create the RAM in the board
2019-10-22 17:44:01 +01:00
sysbus-fdt.c
hw/arm/virt: vTPM support
2020-03-05 12:18:16 -05:00
tosa.c
hw/arm: Fix bad print format specifiers
2020-11-23 10:41:58 +00:00
trace-events
arm/trace: Fix hex printing
2020-10-27 11:10:44 +00:00
trace.h
trace: switch position of headers to what Meson requires
2020-08-21 06:18:24 -04:00
versatilepb.c
qom: simplify object_find_property / object_class_find_property
2020-09-22 16:45:16 -04:00
vexpress.c
qom: simplify object_find_property / object_class_find_property
2020-09-22 16:45:16 -04:00
virt-acpi-build.c
acpi: Align the size to 128k
2020-12-08 13:48:57 -05:00
virt.c
hw: add compat machines for 6.0
2020-12-08 13:48:58 -05:00
xilinx_zynq.c
qom: simplify object_find_property / object_class_find_property
2020-09-22 16:45:16 -04:00
xlnx-versal-virt.c
hw/arm: fix min_cpus for xlnx-versal-virt platform
2020-10-27 10:44:03 +00:00
xlnx-versal.c
hw/arm: xlnx: Set all boards' GEM 'phy-addr' property value to 23
2020-09-09 15:54:18 -07:00
xlnx-zcu102.c
xlnx-zcu102: Register properties as class properties
2020-09-22 16:48:29 -04:00
xlnx-zynqmp.c
hw/arm: xlnx: Set all boards' GEM 'phy-addr' property value to 23
2020-09-09 15:54:18 -07:00
z2.c
Use OBJECT_DECLARE_SIMPLE_TYPE when possible
2020-09-18 14:12:32 -04:00
6f5f6507e4