xemu/hw/arm
Andrew Baumann 716536a9b6 arm/boot: move highbank secure board setup code to common routine
The new version is slightly different, to support Rasbperry Pi (in
particular, Pi1's arm11 core which doesn't support v7 instructions
such as MOVW).

Tested-by: Peter Crosthwaite <crosthwaite.peter@gmail.com>
Reviewed-by: Peter Crosthwaite <crosthwaite.peter@gmail.com>
Signed-off-by: Andrew Baumann <Andrew.Baumann@microsoft.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-02-03 15:00:46 +00:00
..
allwinner-a10.c hw/arm: Clean up includes 2016-01-18 16:33:32 +00:00
armv7m.c hw/arm: Clean up includes 2016-01-18 16:33:32 +00:00
bcm2835_peripherals.c bcm2835_peripherals: add rollup device for bcm2835 peripherals 2016-02-03 15:00:45 +00:00
bcm2836.c bcm2836: add bcm2836 SoC device 2016-02-03 15:00:46 +00:00
boot.c arm/boot: move highbank secure board setup code to common routine 2016-02-03 15:00:46 +00:00
collie.c hw/arm: Clean up includes 2016-01-18 16:33:32 +00:00
cubieboard.c hw/arm: Clean up includes 2016-01-18 16:33:32 +00:00
digic_boards.c hw/arm: Clean up includes 2016-01-18 16:33:32 +00:00
digic.c hw/arm: Clean up includes 2016-01-18 16:33:32 +00:00
exynos4_boards.c hw/arm: Clean up includes 2016-01-18 16:33:32 +00:00
exynos4210.c hw/arm: Clean up includes 2016-01-18 16:33:32 +00:00
fsl-imx25.c hw/arm: Clean up includes 2016-01-18 16:33:32 +00:00
fsl-imx31.c hw/arm: Clean up includes 2016-01-18 16:33:32 +00:00
gumstix.c hw/arm: Clean up includes 2016-01-18 16:33:32 +00:00
highbank.c arm/boot: move highbank secure board setup code to common routine 2016-02-03 15:00:46 +00:00
imx25_pdk.c hw/arm: Clean up includes 2016-01-18 16:33:32 +00:00
integratorcp.c hw/arm: Clean up includes 2016-01-18 16:33:32 +00:00
kzm.c hw/arm: Clean up includes 2016-01-18 16:33:32 +00:00
mainstone.c hw/arm: Clean up includes 2016-01-18 16:33:32 +00:00
Makefile.objs bcm2836: add bcm2836 SoC device 2016-02-03 15:00:46 +00:00
musicpal.c hw/arm: Clean up includes 2016-01-18 16:33:32 +00:00
netduino2.c hw/arm: Clean up includes 2016-01-18 16:33:32 +00:00
nseries.c hw/arm: Clean up includes 2016-01-18 16:33:32 +00:00
omap1.c hw/arm: Clean up includes 2016-01-18 16:33:32 +00:00
omap2.c hw/arm: Clean up includes 2016-01-18 16:33:32 +00:00
omap_sx1.c hw/arm: Clean up includes 2016-01-18 16:33:32 +00:00
palm.c hw/arm: Clean up includes 2016-01-18 16:33:32 +00:00
pxa2xx_gpio.c hw/arm: Clean up includes 2016-01-18 16:33:32 +00:00
pxa2xx_pic.c hw/arm: Clean up includes 2016-01-18 16:33:32 +00:00
pxa2xx.c ssi: Move ssi.h into a separate directory 2016-01-21 14:15:03 +00:00
realview.c hw/arm: Clean up includes 2016-01-18 16:33:32 +00:00
spitz.c ssi: Move ssi.h into a separate directory 2016-01-21 14:15:03 +00:00
stellaris.c ssi: Move ssi.h into a separate directory 2016-01-21 14:15:03 +00:00
stm32f205_soc.c hw/arm: Clean up includes 2016-01-18 16:33:32 +00:00
strongarm.c ssi: Move ssi.h into a separate directory 2016-01-21 14:15:03 +00:00
strongarm.h hw: move private headers to hw/ subdirectories. 2013-04-08 18:13:16 +02:00
sysbus-fdt.c hw/arm: Clean up includes 2016-01-18 16:33:32 +00:00
tosa.c ssi: Move ssi.h into a separate directory 2016-01-21 14:15:03 +00:00
versatilepb.c hw/arm: Clean up includes 2016-01-18 16:33:32 +00:00
vexpress.c hw/arm: Clean up includes 2016-01-18 16:33:32 +00:00
virt-acpi-build.c arm: virt-acpi: each MADT.GICC entry as enabled unconditionally 2016-02-03 13:46:34 +00:00
virt.c hw/arm/virt: Add always-on property to the virt board timer 2016-01-21 14:15:07 +00:00
xilinx_zynq.c ssi: Move ssi.h into a separate directory 2016-01-21 14:15:03 +00:00
xlnx-ep108.c xlnx-ep108: Connect the SPI Flash 2016-01-21 14:15:04 +00:00
xlnx-zynqmp.c xlnx-zynqmp: Connect the SPI devices 2016-01-21 14:15:03 +00:00
z2.c ssi: Move ssi.h into a separate directory 2016-01-21 14:15:03 +00:00