xemu/target-ppc/STATUS
Alexey Kardashevskiy 81d2fb4dfd target-ppc: remove powerpc 970gx
The 970GX definition was added in 2007 and it made sense then but this
version has never been released to the markets and it does not exist in
the real world so there is no point in emulating it.

This removes 970GX.

Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Alexander Graf <agraf@suse.de>
2014-03-05 03:06:23 +01:00

551 lines
10 KiB
Plaintext

PowerPC emulation status.
The goal of this file is to provide a reference status to avoid regressions.
===============================================================================
PowerPC core emulation status
INSN: instruction set.
OK => all instructions are emulated
KO => some insns are missing or some should be removed
? => unchecked
SPR: special purpose registers set
OK => all SPR registered (but some may be fake)
KO => some SPR are missing or should be removed
? => unchecked
MSR: MSR bits definitions
OK => all MSR bits properly defined
KO => MSR definition is incorrect
? => unchecked
IRQ: input signals definitions (mostly interrupts)
OK => input signals are properly defined
KO => input signals are not implemented (system emulation does not work)
? => input signals definitions may be incorrect
MMU: MMU model implementation
OK => MMU model is implemented and Linux is able to boot
KO => MMU model not implemented or bugged
? => MMU model not tested
EXCP: exceptions model implementation
OK => exception model is implemented and Linux is able to boot
KO => exception model not implemented or known to be buggy
? => exception model may be incorrect or is untested
Embedded PowerPC cores
***
PowerPC 401:
INSN OK
SPR OK 401A1
MSR OK
IRQ KO partially implemented
MMU OK
EXCP ?
PowerPC 401x2:
INSN OK
SPR OK 401B2 401C2 401D2 401E2 401F2
MSR OK
IRQ KO partially implemented
MMU OK
EXCP ?
PowerPC IOP480:
INSN OK
SPR OK IOP480
MSR OK
IRQ KO partially implemented
MMU OK
EXCP ?
To be checked: 401G2 401B3 Cobra
***
PowerPC 403:
INSN OK
SPR OK 403GA 403GB
MMU OK
MSR OK
IRQ KO not implemented
EXCP ?
PowerPC 403GCX:
INSN OK
SPR OK 403GCX
MMU OK
MSR OK
IRQ KO not implemented
EXCP ?
To be checked: 403GC
***
PowerPC 405:
Checked: 405CRa 405CRb 405CRc 405EP 405GPa 405GPb 405GPc 405GPd 405GPe 405GPR
Npe405H Npe405H2 Npe405L
INSN OK
SPR OK
MSR OK
IRQ OK
MMU OK
EXCP OK
Remarks: Linux 2.4 boots (at least 1 proprietary firmware).
uboot seems to freeze at boot time.
To be checked: 405D2 405D4 405EZ 405LP Npe4GS3 STB03 STB04 STB25
x2vp4 x2vp7 x2vp20 x2vp50
XXX: find what is IBM e407b4
***
PowerPC 440:
Checked: 440EPa 440EPb 440GXa 440GXb 440GXc 440GXf 440SP 440SP2
INSN OK
SPR OK
MSR OK
IRQ KO not implemented
MMU ?
EXCP ?
PowerPC 440GP:
Checked: 440GPb 440GPc
INSN OK
SPR OK
MSR OK
IRQ KO not implemented
MMU ?
EXCP ?
PowerPC 440x4:
Checked: 440A4 440B4 440G4 440H4
INSN OK
SPR OK
MSR OK
IRQ KO not implemented
MMU ?
EXCP ?
PowerPC 440x5:
Checked: 440A5 440F5 440G5 440H6 440GRa
INSN OK
SPR OK
MSR OK
IRQ KO not implemented
MMU ?
EXCP ?
To be checked: 440EPx 440GRx 440SPE
***
PowerPC 460: (disabled: lack of detailed specifications)
INSN KO
SPR KO
MSR KO
IRQ KO
MMU KO
EXCP KO
PowerPC 460F: (disabled: lack of detailed specifications)
INSN KO
SPR KO
MSR KO
IRQ KO
MMU KO
EXCP KO
***
PowerPC e200: (not implemented)
INSN KO
SPR KO
MSR KO
IRQ KO
MMU KO
EXCP KO
***
PowerPC e300: (not implemented)
INSN KO
SPR KO
MSR KO
IRQ KO
MMU KO
EXCP KO
***
PowerPC e500: (not implemented)
INSN KO
SPR KO
MSR KO
IRQ KO
MMU KO
EXCP KO
***
PowerPC e600: (not implemented)
INSN KO
SPR KO
MSR KO
IRQ KO
MMU KO
EXCP KO
***
32 bits PowerPC
PowerPC 601: (601 601v2)
INSN OK
SPR OK is HID15 only on 601v2 ?
MSR OK
IRQ KO not implemented
MMU ?
EXCP ?
Remarks: some instructions should have a specific behavior (not implemented)
PowerPC 602: 602
INSN OK
SPR OK
MSR OK
IRQ OK
MMU ?
EXCP ? at least timer and external interrupt are OK
Remarks: Linux 2.4 crashes when entering user-mode.
Linux 2.6.22 boots on this CPU but does not recognize it.
PowerPC 603: (603)
INSN OK
SPR OK
MSR OK
IRQ OK
MMU OK
EXCP OK
Remarks: Linux 2.4 boots and properly recognizes the CPU
Linux 2.6.22 idem.
PowerPC 603e: (603e11)
INSN OK
SPR OK
MSR OK
IRQ OK
MMU OK
EXCP OK
Remarks: Linux 2.4 boots and properly recognizes the CPU
Linux 2.6.22 idem.
PowerPC G2:
INSN OK
SPR OK
MSR OK
IRQ OK
MMU OK
EXCP OK
Remarks: Linux 2.4 boots, recognizes the CPU as a 82xx.
Linux 2.6.22 idem.
PowerPC G2le:
INSN OK
SPR OK
MSR OK
IRQ OK
MMU OK
EXCP OK
Remarks: Linux 2.4 does not boots. Same symptoms as 602.
Linux 2.6.22 boots and properly recognizes the CPU.
PowerPC 604:
INSN OK
SPR OK
MSR OK
IRQ OK
MMU OK
EXCP OK
Remarks: Linux 2.4 boots and properly recognizes the CPU.
Linux 2.6.22 idem.
PowerPC 7x0:
INSN OK
SPR OK
MSR OK
IRQ OK
MMU OK
EXCP OK
Remarks: Linux 2.4 boots and properly recognizes the CPU.
Linux 2.6.22 idem.
PowerPC 750fx:
INSN OK
SPR OK
MSR OK
IRQ OK
MMU OK
EXCP OK
Remarks: Linux 2.4 boots but does not properly recognizes the CPU.
Linux 2.6.22 boots and properly recognizes the CPU.
PowerPC 7x5:
INSN ?
SPR ?
MSR ?
IRQ OK
MMU ?
EXCP OK
Remarks: Linux 2.4 does not boot.
Linux 2.6.22 idem.
PowerPC 7400:
INSN KO Altivec missing
SPR OK
MSR OK
IRQ OK
MMU OK
EXCP ? Altivec, ...
Remarks: Linux 2.4 boots and properly recognize the CPU.
Linux 2.6.22 idem.
PowerPC 7410:
INSN KO Altivec missing
SPR OK
MSR OK
IRQ OK
MMU OK
EXCP ? Altivec, ...
Remarks: Linux 2.4 boots and properly recognize the CPU.
Linux 2.6.22 idem.
Note that UM says tlbld & tlbli are implemented but this may be a mistake
as TLB loads are managed by the hardware and the CPU does not implement the
needed registers.
PowerPC 7441:
INSN KO Altivec missing
SPR OK
MSR OK
IRQ OK
MMU OK
EXCP ? Altivec, ...
Remarks: Linux does not have the code to handle TLB miss on this CPU
Linux 2.6.22 idem.
PowerPC 7450/7451:
INSN KO Altivec missing
SPR OK
MSR OK
IRQ OK
MMU OK
EXCP ? Altivec, ...
Remarks: Linux does not have the code to handle TLB miss on this CPU
Linux 2.6.22 idem.
PowerPC 7445/7447:
INSN KO Altivec missing
SPR OK
MSR OK
IRQ OK
MMU OK
EXCP ? Altivec, ...
Remarks: Linux does not have the code to handle TLB miss on this CPU
Linux 2.6.22 idem.
PowerPC 7455/7457:
INSN KO Altivec missing
SPR OK
MSR OK
IRQ OK
MMU OK
EXCP ? Altivec, ...
Remarks: Linux does not have the code to handle TLB miss on this CPU
Linux 2.6.22 idem.
64 bits PowerPC
PowerPC 620: (disabled)
INSN KO
SPR KO
MSR ?
IRQ KO
MMU KO
EXCP KO
Remarks: not much documentation for this implementation...
PowerPC 970:
INSN KO Altivec missing and more
SPR KO
MSR ?
IRQ OK
MMU OK
EXCP KO partially implemented
Remarks: Should be able to boot but there is no hw platform currently emulated.
PowerPC 970FX:
INSN KO Altivec missing and more
SPR KO
MSR ?
IRQ OK
MMU OK
EXCP KO partially implemented
Remarks: Should be able to boot but there is no hw platform currently emulated.
PowerPC Cell:
INSN KO Altivec missing and more
SPR KO
MSR ?
IRQ ?
MMU ?
EXCP ? partially implemented
Remarks: As the core is mostly a 970, should be able to boot.
SPE are not implemented.
PowerPC 630: (disabled: lack of detailed specifications)
INSN KO
SPR KO
MSR KO
IRQ KO
MMU KO
EXCP KO
PowerPC 631: (disabled: lack of detailed specifications)
INSN KO
SPR KO
MSR KO
IRQ KO
MMU KO
EXCP KO
POWER4: (disabled: lack of detailed specifications)
INSN KO
SPR KO
MSR KO
IRQ KO
MMU KO
EXCP KO
POWER4+: (disabled: lack of detailed specifications)
INSN KO
SPR KO
MSR KO
IRQ KO
MMU KO
EXCP KO
POWER5: (disabled: lack of detailed specifications)
INSN KO
SPR KO
MSR KO
IRQ KO
MMU KO
EXCP KO
POWER5+: (disabled: lack of detailed specifications)
INSN KO
SPR KO
MSR KO
IRQ KO
MMU KO
EXCP KO
POWER6: (disabled: lack of detailed specifications)
INSN KO
SPR KO
MSR KO
IRQ KO
MMU KO
EXCP KO
RS64: (disabled: lack of detailed specifications)
INSN KO
SPR KO
MSR KO
IRQ KO
MMU KO
EXCP KO
RS64-II: (disabled: lack of detailed specifications)
INSN KO
SPR KO
MSR KO
IRQ KO
MMU KO
EXCP KO
RS64-III: (disabled: lack of detailed specifications)
INSN KO
SPR KO
MSR KO
IRQ KO
MMU KO
EXCP KO
RS64-IV: (disabled: lack of detailed specifications)
INSN KO
SPR KO
MSR KO
IRQ KO
MMU KO
EXCP KO
Original POWER
POWER: (disabled: lack of detailed specifications)
INSN KO
SPR KO
MSR KO
IRQ KO
MMU KO
EXCP KO
POWER2: (disabled: lack of detailed specifications)
INSN KO
SPR KO
MSR KO
IRQ KO
MMU KO
EXCP KO
===============================================================================
PowerPC microcontrollers emulation status
Implemementation should be sufficient to boot Linux:
(there seem to be problems with uboot freezing at some point)
- PowerPC 405CR
- PowerPC 405EP
TODO:
- PowerPC 401 microcontrollers emulation
- PowerPC 403 microcontrollers emulation
- more PowerPC 405 microcontrollers emulation
- Fixes / more features for implemented PowerPC 405 microcontrollers emulation
- PowerPC 440 microcontrollers emulation
- e200 microcontrollers emulation
- e300 microcontrollers emulation
- e500 microcontrollers emulation
- e600 microcontrollers emulation
===============================================================================
PowerPC based platforms emulation status
* PREP platform (RS/6000 7043...) - TO BE CHECKED (broken)
- Gentoo Linux live CDROM 1.4
- Debian Linux 3.0
- Mandrake Linux 9
* heathrow PowerMac platform (beige PowerMac) - TO BE CHECKED (broken)
- Gentoo Linux live CDROM 1.4
- Debian Linux 3.0
- Mandrake Linux 9
* mac99 platform (white and blue PowerMac, ...)
- Gentoo Linux live CDROM 1.4 - boots, compiles linux kernel
- Debian Linux woody - boots from CDROM and HDD
- Mandrake Linux 9 - boots from CDROM, freezes during install
- Knoppix 2003-07-13_4 boots from CDROM, pb with X configuration
distribution bug: X runs with a properly hand-coded configuration.
- rock Linux 2.0 runs from CDROM
* Linux 2.6 support seems deadly broken (used to boot...).
* PowerPC 405EP reference boards:
- can boot Linux 2.4 & 2.6.
Need to provide a flash image ready to boot for reproductible tests.
TODO:
- URGENT: fix PreP and heathrow platforms
- PowerPC 64 reference platform
- MCA based RS/6000 emulation
- CHRP emulation (not PowerMac)
- PPAR emulation
- ePPAR emulation
- misc PowerPC reference boards emulation
===============================================================================