xemu-project/xemu
1
0
Fork 0
mirror of https://github.com/xemu-project/xemu.git synced 2024-11-24 03:59:52 +00:00
Code Issues Actions Packages Projects Releases Wiki Activity
7f1d87ab0f
xemu/hw/intc
History
Peter Maydell 12fbf1a163 hw/intc/armv7m_nvic: Fix byte-to-interrupt number conversions 
In many of the NVIC registers relating to interrupts, we
have to convert from a byte offset within a register set
into the number of the first interrupt which is affected.
We were getting this wrong for:
 * reads of NVIC_ISPR<n>, NVIC_ISER<n>, NVIC_ICPR<n>, NVIC_ICER<n>,
   NVIC_IABR<n> -- in all these cases we were missing the "* 8"
   needed to convert from the byte offset to the interrupt number
   (since all these registers use one bit per interrupt)
 * writes of NVIC_IPR<n> had the opposite problem of a spurious
   "* 8" (since these registers use one byte per interrupt)

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20180209165810.6668-9-peter.maydell@linaro.org
2018-02-15 18:29:49 +00:00
..
allwinner-a10-pic.c hw: explicitly include qemu/log.h 2016-05-19 16:42:29 +02:00
apic_common.c migration: pre_save return int 2017-09-27 11:35:59 +01:00
apic.c apic: add function to apic that will be used by hvf 2017-12-22 15:01:19 +01:00
arm_gic_common.c migration: pre_save return int 2017-09-27 11:35:59 +01:00
arm_gic_kvm.c qdev: use device_class_set_parent_realize/unrealize/reset() 2018-02-05 13:54:38 +01:00
arm_gic.c qdev: use device_class_set_parent_realize/unrealize/reset() 2018-02-05 13:54:38 +01:00
arm_gicv2m.c hw: explicitly include qemu/log.h 2016-05-19 16:42:29 +02:00
arm_gicv3_common.c migration: pre_save return int 2017-09-27 11:35:59 +01:00
arm_gicv3_cpuif.c arm_gicv3: Fix ICC_BPR1 reset value when EL3 not implemented 2017-06-07 17:21:44 +01:00
arm_gicv3_dist.c hw/intc/arm_gicv3: Make reserved register addresses RAZ/WI 2018-01-11 13:25:40 +00:00
arm_gicv3_its_common.c hw/intc/arm_gicv3: Make reserved register addresses RAZ/WI 2018-01-11 13:25:40 +00:00
arm_gicv3_its_kvm.c qdev: use device_class_set_parent_realize/unrealize/reset() 2018-02-05 13:54:38 +01:00
arm_gicv3_kvm.c qdev: use device_class_set_parent_realize/unrealize/reset() 2018-02-05 13:54:38 +01:00
arm_gicv3_redist.c hw/intc/arm_gicv3: Make reserved register addresses RAZ/WI 2018-01-11 13:25:40 +00:00
arm_gicv3.c qdev: use device_class_set_parent_realize/unrealize/reset() 2018-02-05 13:54:38 +01:00
armv7m_nvic.c hw/intc/armv7m_nvic: Fix byte-to-interrupt number conversions 2018-02-15 18:29:49 +00:00
aspeed_vic.c hw: Clean up includes 2016-06-07 18:19:23 +03:00
bcm2835_ic.c hw: explicitly include qemu/log.h 2016-05-19 16:42:29 +02:00
bcm2836_control.c hw: explicitly include qemu/log.h 2016-05-19 16:42:29 +02:00
etraxfs_pic.c qdev: Replace cannot_instantiate_with_device_add_yet with !user_creatable 2017-05-17 10:37:00 -03:00
exynos4210_combiner.c hw/intc: QOM'ify exynos4210_combiner.c 2016-05-12 13:22:24 +01:00
exynos4210_gic.c hw/intc/exynos4210_gic: Constify array of combiner interrupts 2017-06-13 14:56:58 +01:00
gic_internal.h arm: gic: Remove references to NVIC 2017-02-28 12:08:17 +00:00
gicv3_internal.h target-arm: Add GICv3CPUState in CPUARMState struct 2017-02-28 17:10:00 +00:00
grlib_irqmp.c sparc/leon3 irqmp: fix IRQ software ack 2018-01-24 19:19:50 +00:00
heathrow_pic.c hw/intc: Clean up includes 2016-01-29 15:07:24 +00:00
i8259_common.c i8259: move TYPE_INTERRUPT_STATS_PROVIDER upper 2017-12-21 09:30:32 +01:00
i8259.c qdev: use device_class_set_parent_realize/unrealize/reset() 2018-02-05 13:54:38 +01:00
imx_avic.c hw: explicitly include qemu/log.h 2016-05-19 16:42:29 +02:00
imx_gpcv2.c i.MX: Add code to emulate GPCv2 IP block 2018-02-09 10:40:30 +00:00
intc.c intc: add an interface to gather statistics/informations on interrupt controllers 2016-10-04 10:00:25 +02:00
ioapic_common.c migration: pre_save return int 2017-09-27 11:35:59 +01:00
ioapic.c ioapic/tracing: Remove last DPRINTFs 2017-11-14 14:31:33 +01:00
lm32_pic.c misc: drop old i386 dependency 2017-12-18 17:07:03 +03:00
Makefile.objs i.MX: Add code to emulate GPCv2 IP block 2018-02-09 10:40:30 +00:00
mips_gic.c hw/mips_gic: Update pin state on mask changes 2017-02-21 22:24:58 +00:00
nios2_iic.c qdev: Replace cannot_instantiate_with_device_add_yet with !user_creatable 2017-05-17 10:37:00 -03:00
omap_intc.c Replace all occurances of __FUNCTION__ with __func__ 2018-01-22 09:46:18 +01:00
ompic.c openrisc/ompic: Add OpenRISC Multicore PIC (OMPIC) 2017-10-21 06:35:47 +09:00
openpic_kvm.c memory: Switch memory from using AddressSpace to FlatView 2017-09-21 23:19:37 +02:00
openpic.c openpic: debug w/ info_report() 2017-12-15 09:49:24 +11:00
pl190.c hw: explicitly include qemu/log.h 2016-05-19 16:42:29 +02:00
puv3_intc.c unicore: Clean up includes 2016-01-29 15:07:22 +00:00
realview_gic.c include/qemu/osdep.h: Don't include qapi/error.h 2016-03-22 22:20:15 +01:00
s390_flic_kvm.c s390x/kvm: cache the kvm flic in a central function 2018-02-09 09:37:13 +01:00
s390_flic.c s390x/flic: cache the common flic class in a central function 2018-02-09 09:37:13 +01:00
sh_intc.c hw: explicitly include qemu-common.h and cpu.h 2016-03-22 22:20:17 +01:00
slavio_intctl.c sun4m: remove include/hw/sparc/sun4m.h and all references to it 2018-01-09 21:48:20 +00:00
trace-events target/arm: Split "get pending exception info" from "acknowledge it" 2018-02-09 10:40:27 +00:00
vgic_common.h intc/gic: Extract some reusable vGIC code 2015-09-24 01:29:36 +01:00
xics_kvm.c xics/kvm: synchonize state before 'info pic' 2017-11-14 11:12:42 +11:00
xics_pnv.c Include qapi/error.h exactly where needed 2018-02-09 13:50:17 +01:00
xics_spapr.c Include qapi/error.h exactly where needed 2018-02-09 13:50:17 +01:00
xics.c spapr: introduce a spapr_qirq() helper 2017-12-15 09:49:24 +11:00
xilinx_intc.c hw/intc: Clean up includes 2016-01-29 15:07:24 +00:00
xlnx-pmu-iomod-intc.c xlnx-pmu-iomod-intc: Add the PMU Interrupt controller 2018-01-26 11:09:09 +01:00
xlnx-zynqmp-ipi.c xlnx-zynqmp-ipi: Initial version of the Xilinx IPI device 2018-01-26 11:09:09 +01:00