xemu/hw/misc/sifive_u_otp.c
Markus Armbruster 64eaa82095 hw: Replace trivial drive_get_next() by drive_get()
drive_get_next() is basically a bad idea.  It returns the "next" block
backend of a certain interface type.  "Next" means bus=0,unit=N, where
subsequent calls count N up from zero, per interface type.

This lets you define unit numbers implicitly by execution order.  If the
order changes, or new calls appear "in the middle", unit numbers change.
ABI break.  Hard to spot in review.

A number of machines connect just one backend with drive_get_next().
Change them to use drive_get() directly.  This makes the (zero) unit
number explicit in the code.

Cc: Beniamino Galvani <b.galvani@gmail.com>
Cc: Peter Maydell <peter.maydell@linaro.org>
Cc: Subbaraya Sundeep <sundeep.lkml@gmail.com>
Cc: Niek Linnenbank <nieklinnenbank@gmail.com>
Cc: Andrew Baumann <Andrew.Baumann@microsoft.com>
Cc: "Philippe Mathieu-Daudé" <f4bug@amsat.org>
Cc: Jean-Christophe Dubois <jcd@tribudubois.net>
Cc: Alistair Francis <Alistair.Francis@wdc.com>
Cc: Bin Meng <bin.meng@windriver.com>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Artyom Tarasenko <atar4qemu@gmail.com>
Cc: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Cc: Michael Tokarev <mjt@tls.msk.ru>
Cc: Laurent Vivier <laurent@vivier.eu>
Cc: qemu-arm@nongnu.org
Cc: qemu-riscv@nongnu.org
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20211117163409.3587705-3-armbru@redhat.com>
2021-12-15 08:38:16 +01:00

302 lines
8.7 KiB
C

/*
* QEMU SiFive U OTP (One-Time Programmable) Memory interface
*
* Copyright (c) 2019 Bin Meng <bmeng.cn@gmail.com>
*
* Simple model of the OTP to emulate register reads made by the SDK BSP
*
* This program is free software; you can redistribute it and/or modify it
* under the terms and conditions of the GNU General Public License,
* version 2 or later, as published by the Free Software Foundation.
*
* This program is distributed in the hope it will be useful, but WITHOUT
* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
* FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
* more details.
*
* You should have received a copy of the GNU General Public License along with
* this program. If not, see <http://www.gnu.org/licenses/>.
*/
#include "qemu/osdep.h"
#include "qapi/error.h"
#include "hw/qdev-properties.h"
#include "hw/qdev-properties-system.h"
#include "hw/sysbus.h"
#include "qemu/error-report.h"
#include "qemu/log.h"
#include "qemu/module.h"
#include "hw/misc/sifive_u_otp.h"
#include "sysemu/blockdev.h"
#include "sysemu/block-backend.h"
#define WRITTEN_BIT_ON 0x1
#define SET_FUSEARRAY_BIT(map, i, off, bit) \
map[i] = bit ? (map[i] | bit << off) : (map[i] & ~(0x1 << off))
#define GET_FUSEARRAY_BIT(map, i, off) \
((map[i] >> off) & 0x1)
static uint64_t sifive_u_otp_read(void *opaque, hwaddr addr, unsigned int size)
{
SiFiveUOTPState *s = opaque;
switch (addr) {
case SIFIVE_U_OTP_PA:
return s->pa;
case SIFIVE_U_OTP_PAIO:
return s->paio;
case SIFIVE_U_OTP_PAS:
return s->pas;
case SIFIVE_U_OTP_PCE:
return s->pce;
case SIFIVE_U_OTP_PCLK:
return s->pclk;
case SIFIVE_U_OTP_PDIN:
return s->pdin;
case SIFIVE_U_OTP_PDOUT:
if ((s->pce & SIFIVE_U_OTP_PCE_EN) &&
(s->pdstb & SIFIVE_U_OTP_PDSTB_EN) &&
(s->ptrim & SIFIVE_U_OTP_PTRIM_EN)) {
/* read from backend */
if (s->blk) {
int32_t buf;
if (blk_pread(s->blk, s->pa * SIFIVE_U_OTP_FUSE_WORD, &buf,
SIFIVE_U_OTP_FUSE_WORD) < 0) {
error_report("read error index<%d>", s->pa);
return 0xff;
}
return buf;
}
return s->fuse[s->pa & SIFIVE_U_OTP_PA_MASK];
} else {
return 0xff;
}
case SIFIVE_U_OTP_PDSTB:
return s->pdstb;
case SIFIVE_U_OTP_PPROG:
return s->pprog;
case SIFIVE_U_OTP_PTC:
return s->ptc;
case SIFIVE_U_OTP_PTM:
return s->ptm;
case SIFIVE_U_OTP_PTM_REP:
return s->ptm_rep;
case SIFIVE_U_OTP_PTR:
return s->ptr;
case SIFIVE_U_OTP_PTRIM:
return s->ptrim;
case SIFIVE_U_OTP_PWE:
return s->pwe;
}
qemu_log_mask(LOG_GUEST_ERROR, "%s: read: addr=0x%" HWADDR_PRIx "\n",
__func__, addr);
return 0;
}
static void sifive_u_otp_write(void *opaque, hwaddr addr,
uint64_t val64, unsigned int size)
{
SiFiveUOTPState *s = opaque;
uint32_t val32 = (uint32_t)val64;
switch (addr) {
case SIFIVE_U_OTP_PA:
s->pa = val32 & SIFIVE_U_OTP_PA_MASK;
break;
case SIFIVE_U_OTP_PAIO:
s->paio = val32;
break;
case SIFIVE_U_OTP_PAS:
s->pas = val32;
break;
case SIFIVE_U_OTP_PCE:
s->pce = val32;
break;
case SIFIVE_U_OTP_PCLK:
s->pclk = val32;
break;
case SIFIVE_U_OTP_PDIN:
s->pdin = val32;
break;
case SIFIVE_U_OTP_PDOUT:
/* read-only */
break;
case SIFIVE_U_OTP_PDSTB:
s->pdstb = val32;
break;
case SIFIVE_U_OTP_PPROG:
s->pprog = val32;
break;
case SIFIVE_U_OTP_PTC:
s->ptc = val32;
break;
case SIFIVE_U_OTP_PTM:
s->ptm = val32;
break;
case SIFIVE_U_OTP_PTM_REP:
s->ptm_rep = val32;
break;
case SIFIVE_U_OTP_PTR:
s->ptr = val32;
break;
case SIFIVE_U_OTP_PTRIM:
s->ptrim = val32;
break;
case SIFIVE_U_OTP_PWE:
s->pwe = val32 & SIFIVE_U_OTP_PWE_EN;
/* PWE is enabled. Ignore PAS=1 (no redundancy cell) */
if (s->pwe && !s->pas) {
if (GET_FUSEARRAY_BIT(s->fuse_wo, s->pa, s->paio)) {
qemu_log_mask(LOG_GUEST_ERROR,
"write once error: idx<%u>, bit<%u>\n",
s->pa, s->paio);
break;
}
/* write bit data */
SET_FUSEARRAY_BIT(s->fuse, s->pa, s->paio, s->pdin);
/* write to backend */
if (s->blk) {
if (blk_pwrite(s->blk, s->pa * SIFIVE_U_OTP_FUSE_WORD,
&s->fuse[s->pa], SIFIVE_U_OTP_FUSE_WORD,
0) < 0) {
error_report("write error index<%d>", s->pa);
}
}
/* update written bit */
SET_FUSEARRAY_BIT(s->fuse_wo, s->pa, s->paio, WRITTEN_BIT_ON);
}
break;
default:
qemu_log_mask(LOG_GUEST_ERROR, "%s: bad write: addr=0x%" HWADDR_PRIx
" v=0x%x\n", __func__, addr, val32);
}
}
static const MemoryRegionOps sifive_u_otp_ops = {
.read = sifive_u_otp_read,
.write = sifive_u_otp_write,
.endianness = DEVICE_NATIVE_ENDIAN,
.valid = {
.min_access_size = 4,
.max_access_size = 4
}
};
static Property sifive_u_otp_properties[] = {
DEFINE_PROP_UINT32("serial", SiFiveUOTPState, serial, 0),
DEFINE_PROP_DRIVE("drive", SiFiveUOTPState, blk),
DEFINE_PROP_END_OF_LIST(),
};
static void sifive_u_otp_realize(DeviceState *dev, Error **errp)
{
SiFiveUOTPState *s = SIFIVE_U_OTP(dev);
DriveInfo *dinfo;
memory_region_init_io(&s->mmio, OBJECT(dev), &sifive_u_otp_ops, s,
TYPE_SIFIVE_U_OTP, SIFIVE_U_OTP_REG_SIZE);
sysbus_init_mmio(SYS_BUS_DEVICE(dev), &s->mmio);
dinfo = drive_get(IF_PFLASH, 0, 0);
if (!dinfo) {
dinfo = drive_get(IF_NONE, 0, 0);
if (dinfo) {
warn_report("using \"-drive if=none\" for the OTP is deprecated, "
"use \"-drive if=pflash\" instead.");
}
}
if (dinfo) {
int ret;
uint64_t perm;
int filesize;
BlockBackend *blk;
blk = blk_by_legacy_dinfo(dinfo);
filesize = SIFIVE_U_OTP_NUM_FUSES * SIFIVE_U_OTP_FUSE_WORD;
if (blk_getlength(blk) < filesize) {
error_setg(errp, "OTP drive size < 16K");
return;
}
qdev_prop_set_drive_err(dev, "drive", blk, errp);
if (s->blk) {
perm = BLK_PERM_CONSISTENT_READ |
(blk_supports_write_perm(s->blk) ? BLK_PERM_WRITE : 0);
ret = blk_set_perm(s->blk, perm, BLK_PERM_ALL, errp);
if (ret < 0) {
return;
}
if (blk_pread(s->blk, 0, s->fuse, filesize) != filesize) {
error_setg(errp, "failed to read the initial flash content");
return;
}
}
}
/* Initialize all fuses' initial value to 0xFFs */
memset(s->fuse, 0xff, sizeof(s->fuse));
/* Make a valid content of serial number */
s->fuse[SIFIVE_U_OTP_SERIAL_ADDR] = s->serial;
s->fuse[SIFIVE_U_OTP_SERIAL_ADDR + 1] = ~(s->serial);
if (s->blk) {
/* Put serial number to backend as well*/
uint32_t serial_data;
int index = SIFIVE_U_OTP_SERIAL_ADDR;
serial_data = s->serial;
if (blk_pwrite(s->blk, index * SIFIVE_U_OTP_FUSE_WORD,
&serial_data, SIFIVE_U_OTP_FUSE_WORD, 0) < 0) {
error_setg(errp, "failed to write index<%d>", index);
return;
}
serial_data = ~(s->serial);
if (blk_pwrite(s->blk, (index + 1) * SIFIVE_U_OTP_FUSE_WORD,
&serial_data, SIFIVE_U_OTP_FUSE_WORD, 0) < 0) {
error_setg(errp, "failed to write index<%d>", index + 1);
return;
}
}
/* Initialize write-once map */
memset(s->fuse_wo, 0x00, sizeof(s->fuse_wo));
}
static void sifive_u_otp_class_init(ObjectClass *klass, void *data)
{
DeviceClass *dc = DEVICE_CLASS(klass);
device_class_set_props(dc, sifive_u_otp_properties);
dc->realize = sifive_u_otp_realize;
}
static const TypeInfo sifive_u_otp_info = {
.name = TYPE_SIFIVE_U_OTP,
.parent = TYPE_SYS_BUS_DEVICE,
.instance_size = sizeof(SiFiveUOTPState),
.class_init = sifive_u_otp_class_init,
};
static void sifive_u_otp_register_types(void)
{
type_register_static(&sifive_u_otp_info);
}
type_init(sifive_u_otp_register_types)