xemu/hw/misc/sifive_u_otp.c
Green Wan 51b6c1bbc3 hw/misc/sifive_u_otp: Add backend drive support
Add '-drive' support to OTP device. Allow users to assign a raw file
as OTP image.

test commands for 16k otp.img filled with zero:

$ dd if=/dev/zero of=./otp.img bs=1k count=16
$ ./qemu-system-riscv64 -M sifive_u -m 256M -nographic -bios none \
-kernel ../opensbi/build/platform/sifive/fu540/firmware/fw_payload.elf \
-d guest_errors -drive if=none,format=raw,file=otp.img

Signed-off-by: Green Wan <green.wan@sifive.com>
Reviewed-by: Bin Meng <bin.meng@windriver.com>
Tested-by: Bin Meng <bin.meng@windriver.com>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20201020033732.12921-3-green.wan@sifive.com
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2020-10-22 12:00:50 -07:00

285 lines
8.0 KiB
C

/*
* QEMU SiFive U OTP (One-Time Programmable) Memory interface
*
* Copyright (c) 2019 Bin Meng <bmeng.cn@gmail.com>
*
* Simple model of the OTP to emulate register reads made by the SDK BSP
*
* This program is free software; you can redistribute it and/or modify it
* under the terms and conditions of the GNU General Public License,
* version 2 or later, as published by the Free Software Foundation.
*
* This program is distributed in the hope it will be useful, but WITHOUT
* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
* FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
* more details.
*
* You should have received a copy of the GNU General Public License along with
* this program. If not, see <http://www.gnu.org/licenses/>.
*/
#include "qemu/osdep.h"
#include "qapi/error.h"
#include "hw/qdev-properties.h"
#include "hw/sysbus.h"
#include "qemu/log.h"
#include "qemu/module.h"
#include "hw/misc/sifive_u_otp.h"
#include "sysemu/blockdev.h"
#include "sysemu/block-backend.h"
#define WRITTEN_BIT_ON 0x1
#define SET_FUSEARRAY_BIT(map, i, off, bit) \
map[i] = bit ? (map[i] | bit << off) : (map[i] & ~(0x1 << off))
#define GET_FUSEARRAY_BIT(map, i, off) \
((map[i] >> off) & 0x1)
static uint64_t sifive_u_otp_read(void *opaque, hwaddr addr, unsigned int size)
{
SiFiveUOTPState *s = opaque;
switch (addr) {
case SIFIVE_U_OTP_PA:
return s->pa;
case SIFIVE_U_OTP_PAIO:
return s->paio;
case SIFIVE_U_OTP_PAS:
return s->pas;
case SIFIVE_U_OTP_PCE:
return s->pce;
case SIFIVE_U_OTP_PCLK:
return s->pclk;
case SIFIVE_U_OTP_PDIN:
return s->pdin;
case SIFIVE_U_OTP_PDOUT:
if ((s->pce & SIFIVE_U_OTP_PCE_EN) &&
(s->pdstb & SIFIVE_U_OTP_PDSTB_EN) &&
(s->ptrim & SIFIVE_U_OTP_PTRIM_EN)) {
/* read from backend */
if (s->blk) {
int32_t buf;
blk_pread(s->blk, s->pa * SIFIVE_U_OTP_FUSE_WORD, &buf,
SIFIVE_U_OTP_FUSE_WORD);
return buf;
}
return s->fuse[s->pa & SIFIVE_U_OTP_PA_MASK];
} else {
return 0xff;
}
case SIFIVE_U_OTP_PDSTB:
return s->pdstb;
case SIFIVE_U_OTP_PPROG:
return s->pprog;
case SIFIVE_U_OTP_PTC:
return s->ptc;
case SIFIVE_U_OTP_PTM:
return s->ptm;
case SIFIVE_U_OTP_PTM_REP:
return s->ptm_rep;
case SIFIVE_U_OTP_PTR:
return s->ptr;
case SIFIVE_U_OTP_PTRIM:
return s->ptrim;
case SIFIVE_U_OTP_PWE:
return s->pwe;
}
qemu_log_mask(LOG_GUEST_ERROR, "%s: read: addr=0x%" HWADDR_PRIx "\n",
__func__, addr);
return 0;
}
static void sifive_u_otp_write(void *opaque, hwaddr addr,
uint64_t val64, unsigned int size)
{
SiFiveUOTPState *s = opaque;
uint32_t val32 = (uint32_t)val64;
switch (addr) {
case SIFIVE_U_OTP_PA:
s->pa = val32 & SIFIVE_U_OTP_PA_MASK;
break;
case SIFIVE_U_OTP_PAIO:
s->paio = val32;
break;
case SIFIVE_U_OTP_PAS:
s->pas = val32;
break;
case SIFIVE_U_OTP_PCE:
s->pce = val32;
break;
case SIFIVE_U_OTP_PCLK:
s->pclk = val32;
break;
case SIFIVE_U_OTP_PDIN:
s->pdin = val32;
break;
case SIFIVE_U_OTP_PDOUT:
/* read-only */
break;
case SIFIVE_U_OTP_PDSTB:
s->pdstb = val32;
break;
case SIFIVE_U_OTP_PPROG:
s->pprog = val32;
break;
case SIFIVE_U_OTP_PTC:
s->ptc = val32;
break;
case SIFIVE_U_OTP_PTM:
s->ptm = val32;
break;
case SIFIVE_U_OTP_PTM_REP:
s->ptm_rep = val32;
break;
case SIFIVE_U_OTP_PTR:
s->ptr = val32;
break;
case SIFIVE_U_OTP_PTRIM:
s->ptrim = val32;
break;
case SIFIVE_U_OTP_PWE:
s->pwe = val32 & SIFIVE_U_OTP_PWE_EN;
/* PWE is enabled. Ignore PAS=1 (no redundancy cell) */
if (s->pwe && !s->pas) {
if (GET_FUSEARRAY_BIT(s->fuse_wo, s->pa, s->paio)) {
qemu_log_mask(LOG_GUEST_ERROR,
"write once error: idx<%u>, bit<%u>\n",
s->pa, s->paio);
break;
}
/* write bit data */
SET_FUSEARRAY_BIT(s->fuse, s->pa, s->paio, s->pdin);
/* write to backend */
if (s->blk) {
blk_pwrite(s->blk, s->pa * SIFIVE_U_OTP_FUSE_WORD,
&s->fuse[s->pa], SIFIVE_U_OTP_FUSE_WORD, 0);
}
/* update written bit */
SET_FUSEARRAY_BIT(s->fuse_wo, s->pa, s->paio, WRITTEN_BIT_ON);
}
break;
default:
qemu_log_mask(LOG_GUEST_ERROR, "%s: bad write: addr=0x%" HWADDR_PRIx
" v=0x%x\n", __func__, addr, val32);
}
}
static const MemoryRegionOps sifive_u_otp_ops = {
.read = sifive_u_otp_read,
.write = sifive_u_otp_write,
.endianness = DEVICE_NATIVE_ENDIAN,
.valid = {
.min_access_size = 4,
.max_access_size = 4
}
};
static Property sifive_u_otp_properties[] = {
DEFINE_PROP_UINT32("serial", SiFiveUOTPState, serial, 0),
DEFINE_PROP_DRIVE("drive", SiFiveUOTPState, blk),
DEFINE_PROP_END_OF_LIST(),
};
static void sifive_u_otp_realize(DeviceState *dev, Error **errp)
{
SiFiveUOTPState *s = SIFIVE_U_OTP(dev);
DriveInfo *dinfo;
memory_region_init_io(&s->mmio, OBJECT(dev), &sifive_u_otp_ops, s,
TYPE_SIFIVE_U_OTP, SIFIVE_U_OTP_REG_SIZE);
sysbus_init_mmio(SYS_BUS_DEVICE(dev), &s->mmio);
dinfo = drive_get_next(IF_NONE);
if (dinfo) {
int ret;
uint64_t perm;
int filesize;
BlockBackend *blk;
blk = blk_by_legacy_dinfo(dinfo);
filesize = SIFIVE_U_OTP_NUM_FUSES * SIFIVE_U_OTP_FUSE_WORD;
if (blk_getlength(blk) < filesize) {
error_setg(errp, "OTP drive size < 16K");
return;
}
qdev_prop_set_drive_err(dev, "drive", blk, errp);
if (s->blk) {
perm = BLK_PERM_CONSISTENT_READ |
(blk_is_read_only(s->blk) ? 0 : BLK_PERM_WRITE);
ret = blk_set_perm(s->blk, perm, BLK_PERM_ALL, errp);
if (ret < 0) {
return;
}
if (blk_pread(s->blk, 0, s->fuse, filesize) != filesize) {
error_setg(errp, "failed to read the initial flash content");
}
}
}
}
static void sifive_u_otp_reset(DeviceState *dev)
{
SiFiveUOTPState *s = SIFIVE_U_OTP(dev);
/* Initialize all fuses' initial value to 0xFFs */
memset(s->fuse, 0xff, sizeof(s->fuse));
/* Make a valid content of serial number */
s->fuse[SIFIVE_U_OTP_SERIAL_ADDR] = s->serial;
s->fuse[SIFIVE_U_OTP_SERIAL_ADDR + 1] = ~(s->serial);
if (s->blk) {
/* Put serial number to backend as well*/
uint32_t serial_data;
int index = SIFIVE_U_OTP_SERIAL_ADDR;
serial_data = s->serial;
blk_pwrite(s->blk, index * SIFIVE_U_OTP_FUSE_WORD,
&serial_data, SIFIVE_U_OTP_FUSE_WORD, 0);
serial_data = ~(s->serial);
blk_pwrite(s->blk, (index + 1) * SIFIVE_U_OTP_FUSE_WORD,
&serial_data, SIFIVE_U_OTP_FUSE_WORD, 0);
}
/* Initialize write-once map */
memset(s->fuse_wo, 0x00, sizeof(s->fuse_wo));
}
static void sifive_u_otp_class_init(ObjectClass *klass, void *data)
{
DeviceClass *dc = DEVICE_CLASS(klass);
device_class_set_props(dc, sifive_u_otp_properties);
dc->realize = sifive_u_otp_realize;
dc->reset = sifive_u_otp_reset;
}
static const TypeInfo sifive_u_otp_info = {
.name = TYPE_SIFIVE_U_OTP,
.parent = TYPE_SYS_BUS_DEVICE,
.instance_size = sizeof(SiFiveUOTPState),
.class_init = sifive_u_otp_class_init,
};
static void sifive_u_otp_register_types(void)
{
type_register_static(&sifive_u_otp_info);
}
type_init(sifive_u_otp_register_types)