mirror of
https://github.com/xemu-project/xemu.git
synced 2024-11-24 12:09:58 +00:00
85e2d8d510
Cores with and without MMU have system RAM and ROM at different locations. Also with noMMU cores system IO region is accessible through two physical address ranges. Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
708 lines
22 KiB
C
708 lines
22 KiB
C
/*
|
|
* Copyright (c) 2011, Max Filippov, Open Source and Linux Lab.
|
|
* All rights reserved.
|
|
*
|
|
* Redistribution and use in source and binary forms, with or without
|
|
* modification, are permitted provided that the following conditions are met:
|
|
* * Redistributions of source code must retain the above copyright
|
|
* notice, this list of conditions and the following disclaimer.
|
|
* * Redistributions in binary form must reproduce the above copyright
|
|
* notice, this list of conditions and the following disclaimer in the
|
|
* documentation and/or other materials provided with the distribution.
|
|
* * Neither the name of the Open Source and Linux Lab nor the
|
|
* names of its contributors may be used to endorse or promote products
|
|
* derived from this software without specific prior written permission.
|
|
*
|
|
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
|
|
* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
|
|
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
|
|
* ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY
|
|
* DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
|
|
* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
|
|
* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
|
|
* ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
|
|
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
|
|
* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
|
*/
|
|
|
|
#include "qemu/osdep.h"
|
|
#include "qapi/error.h"
|
|
#include "qemu-common.h"
|
|
#include "cpu.h"
|
|
#include "sysemu/sysemu.h"
|
|
#include "hw/boards.h"
|
|
#include "hw/loader.h"
|
|
#include "elf.h"
|
|
#include "exec/memory.h"
|
|
#include "exec/address-spaces.h"
|
|
#include "hw/char/serial.h"
|
|
#include "net/net.h"
|
|
#include "hw/sysbus.h"
|
|
#include "hw/block/flash.h"
|
|
#include "sysemu/block-backend.h"
|
|
#include "chardev/char.h"
|
|
#include "sysemu/device_tree.h"
|
|
#include "qemu/error-report.h"
|
|
#include "bootparam.h"
|
|
#include "xtensa_memory.h"
|
|
|
|
typedef struct XtfpgaFlashDesc {
|
|
hwaddr base;
|
|
size_t size;
|
|
size_t boot_base;
|
|
size_t sector_size;
|
|
} XtfpgaFlashDesc;
|
|
|
|
typedef struct XtfpgaBoardDesc {
|
|
const XtfpgaFlashDesc *flash;
|
|
size_t sram_size;
|
|
const hwaddr *io;
|
|
} XtfpgaBoardDesc;
|
|
|
|
typedef struct XtfpgaFpgaState {
|
|
MemoryRegion iomem;
|
|
uint32_t leds;
|
|
uint32_t switches;
|
|
} XtfpgaFpgaState;
|
|
|
|
static void xtfpga_fpga_reset(void *opaque)
|
|
{
|
|
XtfpgaFpgaState *s = opaque;
|
|
|
|
s->leds = 0;
|
|
s->switches = 0;
|
|
}
|
|
|
|
static uint64_t xtfpga_fpga_read(void *opaque, hwaddr addr,
|
|
unsigned size)
|
|
{
|
|
XtfpgaFpgaState *s = opaque;
|
|
|
|
switch (addr) {
|
|
case 0x0: /*build date code*/
|
|
return 0x09272011;
|
|
|
|
case 0x4: /*processor clock frequency, Hz*/
|
|
return 10000000;
|
|
|
|
case 0x8: /*LEDs (off = 0, on = 1)*/
|
|
return s->leds;
|
|
|
|
case 0xc: /*DIP switches (off = 0, on = 1)*/
|
|
return s->switches;
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
static void xtfpga_fpga_write(void *opaque, hwaddr addr,
|
|
uint64_t val, unsigned size)
|
|
{
|
|
XtfpgaFpgaState *s = opaque;
|
|
|
|
switch (addr) {
|
|
case 0x8: /*LEDs (off = 0, on = 1)*/
|
|
s->leds = val;
|
|
break;
|
|
|
|
case 0x10: /*board reset*/
|
|
if (val == 0xdead) {
|
|
qemu_system_reset_request(SHUTDOWN_CAUSE_GUEST_RESET);
|
|
}
|
|
break;
|
|
}
|
|
}
|
|
|
|
static const MemoryRegionOps xtfpga_fpga_ops = {
|
|
.read = xtfpga_fpga_read,
|
|
.write = xtfpga_fpga_write,
|
|
.endianness = DEVICE_NATIVE_ENDIAN,
|
|
};
|
|
|
|
static XtfpgaFpgaState *xtfpga_fpga_init(MemoryRegion *address_space,
|
|
hwaddr base)
|
|
{
|
|
XtfpgaFpgaState *s = g_malloc(sizeof(XtfpgaFpgaState));
|
|
|
|
memory_region_init_io(&s->iomem, NULL, &xtfpga_fpga_ops, s,
|
|
"xtfpga.fpga", 0x10000);
|
|
memory_region_add_subregion(address_space, base, &s->iomem);
|
|
xtfpga_fpga_reset(s);
|
|
qemu_register_reset(xtfpga_fpga_reset, s);
|
|
return s;
|
|
}
|
|
|
|
static void xtfpga_net_init(MemoryRegion *address_space,
|
|
hwaddr base,
|
|
hwaddr descriptors,
|
|
hwaddr buffers,
|
|
qemu_irq irq, NICInfo *nd)
|
|
{
|
|
DeviceState *dev;
|
|
SysBusDevice *s;
|
|
MemoryRegion *ram;
|
|
|
|
dev = qdev_create(NULL, "open_eth");
|
|
qdev_set_nic_properties(dev, nd);
|
|
qdev_init_nofail(dev);
|
|
|
|
s = SYS_BUS_DEVICE(dev);
|
|
sysbus_connect_irq(s, 0, irq);
|
|
memory_region_add_subregion(address_space, base,
|
|
sysbus_mmio_get_region(s, 0));
|
|
memory_region_add_subregion(address_space, descriptors,
|
|
sysbus_mmio_get_region(s, 1));
|
|
|
|
ram = g_malloc(sizeof(*ram));
|
|
memory_region_init_ram_nomigrate(ram, OBJECT(s), "open_eth.ram", 16384,
|
|
&error_fatal);
|
|
vmstate_register_ram_global(ram);
|
|
memory_region_add_subregion(address_space, buffers, ram);
|
|
}
|
|
|
|
static pflash_t *xtfpga_flash_init(MemoryRegion *address_space,
|
|
const XtfpgaBoardDesc *board,
|
|
DriveInfo *dinfo, int be)
|
|
{
|
|
SysBusDevice *s;
|
|
DeviceState *dev = qdev_create(NULL, "cfi.pflash01");
|
|
|
|
qdev_prop_set_drive(dev, "drive", blk_by_legacy_dinfo(dinfo),
|
|
&error_abort);
|
|
qdev_prop_set_uint32(dev, "num-blocks",
|
|
board->flash->size / board->flash->sector_size);
|
|
qdev_prop_set_uint64(dev, "sector-length", board->flash->sector_size);
|
|
qdev_prop_set_uint8(dev, "width", 2);
|
|
qdev_prop_set_bit(dev, "big-endian", be);
|
|
qdev_prop_set_string(dev, "name", "xtfpga.io.flash");
|
|
qdev_init_nofail(dev);
|
|
s = SYS_BUS_DEVICE(dev);
|
|
memory_region_add_subregion(address_space, board->flash->base,
|
|
sysbus_mmio_get_region(s, 0));
|
|
return OBJECT_CHECK(pflash_t, (dev), "cfi.pflash01");
|
|
}
|
|
|
|
static uint64_t translate_phys_addr(void *opaque, uint64_t addr)
|
|
{
|
|
XtensaCPU *cpu = opaque;
|
|
|
|
return cpu_get_phys_page_debug(CPU(cpu), addr);
|
|
}
|
|
|
|
static void xtfpga_reset(void *opaque)
|
|
{
|
|
XtensaCPU *cpu = opaque;
|
|
|
|
cpu_reset(CPU(cpu));
|
|
}
|
|
|
|
static uint64_t xtfpga_io_read(void *opaque, hwaddr addr,
|
|
unsigned size)
|
|
{
|
|
return 0;
|
|
}
|
|
|
|
static void xtfpga_io_write(void *opaque, hwaddr addr,
|
|
uint64_t val, unsigned size)
|
|
{
|
|
}
|
|
|
|
static const MemoryRegionOps xtfpga_io_ops = {
|
|
.read = xtfpga_io_read,
|
|
.write = xtfpga_io_write,
|
|
.endianness = DEVICE_NATIVE_ENDIAN,
|
|
};
|
|
|
|
static void xtfpga_init(const XtfpgaBoardDesc *board, MachineState *machine)
|
|
{
|
|
#ifdef TARGET_WORDS_BIGENDIAN
|
|
int be = 1;
|
|
#else
|
|
int be = 0;
|
|
#endif
|
|
MemoryRegion *system_memory = get_system_memory();
|
|
XtensaCPU *cpu = NULL;
|
|
CPUXtensaState *env = NULL;
|
|
MemoryRegion *system_io;
|
|
DriveInfo *dinfo;
|
|
pflash_t *flash = NULL;
|
|
QemuOpts *machine_opts = qemu_get_machine_opts();
|
|
const char *kernel_filename = qemu_opt_get(machine_opts, "kernel");
|
|
const char *kernel_cmdline = qemu_opt_get(machine_opts, "append");
|
|
const char *dtb_filename = qemu_opt_get(machine_opts, "dtb");
|
|
const char *initrd_filename = qemu_opt_get(machine_opts, "initrd");
|
|
const unsigned system_io_size = 224 * 1024 * 1024;
|
|
int n;
|
|
|
|
for (n = 0; n < smp_cpus; n++) {
|
|
cpu = XTENSA_CPU(cpu_create(machine->cpu_type));
|
|
env = &cpu->env;
|
|
|
|
env->sregs[PRID] = n;
|
|
qemu_register_reset(xtfpga_reset, cpu);
|
|
/* Need MMU initialized prior to ELF loading,
|
|
* so that ELF gets loaded into virtual addresses
|
|
*/
|
|
cpu_reset(CPU(cpu));
|
|
}
|
|
|
|
if (env) {
|
|
XtensaMemory sysram = env->config->sysram;
|
|
|
|
sysram.location[0].size = machine->ram_size;
|
|
xtensa_create_memory_regions(&env->config->instrom, "xtensa.instrom",
|
|
system_memory);
|
|
xtensa_create_memory_regions(&env->config->instram, "xtensa.instram",
|
|
system_memory);
|
|
xtensa_create_memory_regions(&env->config->datarom, "xtensa.datarom",
|
|
system_memory);
|
|
xtensa_create_memory_regions(&env->config->dataram, "xtensa.dataram",
|
|
system_memory);
|
|
xtensa_create_memory_regions(&sysram, "xtensa.sysram",
|
|
system_memory);
|
|
}
|
|
|
|
system_io = g_malloc(sizeof(*system_io));
|
|
memory_region_init_io(system_io, NULL, &xtfpga_io_ops, NULL, "xtfpga.io",
|
|
system_io_size);
|
|
memory_region_add_subregion(system_memory, board->io[0], system_io);
|
|
if (board->io[1]) {
|
|
MemoryRegion *io = g_malloc(sizeof(*io));
|
|
|
|
memory_region_init_alias(io, NULL, "xtfpga.io.cached",
|
|
system_io, 0, system_io_size);
|
|
memory_region_add_subregion(system_memory, board->io[1], io);
|
|
}
|
|
xtfpga_fpga_init(system_io, 0x0d020000);
|
|
if (nd_table[0].used) {
|
|
xtfpga_net_init(system_io, 0x0d030000, 0x0d030400, 0x0d800000,
|
|
xtensa_get_extint(env, 1), nd_table);
|
|
}
|
|
|
|
if (!serial_hds[0]) {
|
|
serial_hds[0] = qemu_chr_new("serial0", "null");
|
|
}
|
|
|
|
serial_mm_init(system_io, 0x0d050020, 2, xtensa_get_extint(env, 0),
|
|
115200, serial_hds[0], DEVICE_NATIVE_ENDIAN);
|
|
|
|
dinfo = drive_get(IF_PFLASH, 0, 0);
|
|
if (dinfo) {
|
|
flash = xtfpga_flash_init(system_io, board, dinfo, be);
|
|
}
|
|
|
|
/* Use presence of kernel file name as 'boot from SRAM' switch. */
|
|
if (kernel_filename) {
|
|
uint32_t entry_point = env->pc;
|
|
size_t bp_size = 3 * get_tag_size(0); /* first/last and memory tags */
|
|
uint32_t tagptr = env->config->sysrom.location[0].addr +
|
|
board->sram_size;
|
|
uint32_t cur_tagptr;
|
|
BpMemInfo memory_location = {
|
|
.type = tswap32(MEMORY_TYPE_CONVENTIONAL),
|
|
.start = tswap32(env->config->sysram.location[0].addr),
|
|
.end = tswap32(env->config->sysram.location[0].addr +
|
|
machine->ram_size),
|
|
};
|
|
uint32_t lowmem_end = machine->ram_size < 0x08000000 ?
|
|
machine->ram_size : 0x08000000;
|
|
uint32_t cur_lowmem = QEMU_ALIGN_UP(lowmem_end / 2, 4096);
|
|
|
|
lowmem_end += env->config->sysram.location[0].addr;
|
|
cur_lowmem += env->config->sysram.location[0].addr;
|
|
|
|
xtensa_create_memory_regions(&env->config->sysrom, "xtensa.sysrom",
|
|
system_memory);
|
|
|
|
if (kernel_cmdline) {
|
|
bp_size += get_tag_size(strlen(kernel_cmdline) + 1);
|
|
}
|
|
if (dtb_filename) {
|
|
bp_size += get_tag_size(sizeof(uint32_t));
|
|
}
|
|
if (initrd_filename) {
|
|
bp_size += get_tag_size(sizeof(BpMemInfo));
|
|
}
|
|
|
|
/* Put kernel bootparameters to the end of that SRAM */
|
|
tagptr = (tagptr - bp_size) & ~0xff;
|
|
cur_tagptr = put_tag(tagptr, BP_TAG_FIRST, 0, NULL);
|
|
cur_tagptr = put_tag(cur_tagptr, BP_TAG_MEMORY,
|
|
sizeof(memory_location), &memory_location);
|
|
|
|
if (kernel_cmdline) {
|
|
cur_tagptr = put_tag(cur_tagptr, BP_TAG_COMMAND_LINE,
|
|
strlen(kernel_cmdline) + 1, kernel_cmdline);
|
|
}
|
|
#ifdef CONFIG_FDT
|
|
if (dtb_filename) {
|
|
int fdt_size;
|
|
void *fdt = load_device_tree(dtb_filename, &fdt_size);
|
|
uint32_t dtb_addr = tswap32(cur_lowmem);
|
|
|
|
if (!fdt) {
|
|
error_report("could not load DTB '%s'", dtb_filename);
|
|
exit(EXIT_FAILURE);
|
|
}
|
|
|
|
cpu_physical_memory_write(cur_lowmem, fdt, fdt_size);
|
|
cur_tagptr = put_tag(cur_tagptr, BP_TAG_FDT,
|
|
sizeof(dtb_addr), &dtb_addr);
|
|
cur_lowmem = QEMU_ALIGN_UP(cur_lowmem + fdt_size, 4096);
|
|
}
|
|
#else
|
|
if (dtb_filename) {
|
|
error_report("could not load DTB '%s': "
|
|
"FDT support is not configured in QEMU",
|
|
dtb_filename);
|
|
exit(EXIT_FAILURE);
|
|
}
|
|
#endif
|
|
if (initrd_filename) {
|
|
BpMemInfo initrd_location = { 0 };
|
|
int initrd_size = load_ramdisk(initrd_filename, cur_lowmem,
|
|
lowmem_end - cur_lowmem);
|
|
|
|
if (initrd_size < 0) {
|
|
initrd_size = load_image_targphys(initrd_filename,
|
|
cur_lowmem,
|
|
lowmem_end - cur_lowmem);
|
|
}
|
|
if (initrd_size < 0) {
|
|
error_report("could not load initrd '%s'", initrd_filename);
|
|
exit(EXIT_FAILURE);
|
|
}
|
|
initrd_location.start = tswap32(cur_lowmem);
|
|
initrd_location.end = tswap32(cur_lowmem + initrd_size);
|
|
cur_tagptr = put_tag(cur_tagptr, BP_TAG_INITRD,
|
|
sizeof(initrd_location), &initrd_location);
|
|
cur_lowmem = QEMU_ALIGN_UP(cur_lowmem + initrd_size, 4096);
|
|
}
|
|
cur_tagptr = put_tag(cur_tagptr, BP_TAG_LAST, 0, NULL);
|
|
env->regs[2] = tagptr;
|
|
|
|
uint64_t elf_entry;
|
|
uint64_t elf_lowaddr;
|
|
int success = load_elf(kernel_filename, translate_phys_addr, cpu,
|
|
&elf_entry, &elf_lowaddr, NULL, be, EM_XTENSA, 0, 0);
|
|
if (success > 0) {
|
|
entry_point = elf_entry;
|
|
} else {
|
|
hwaddr ep;
|
|
int is_linux;
|
|
success = load_uimage(kernel_filename, &ep, NULL, &is_linux,
|
|
translate_phys_addr, cpu);
|
|
if (success > 0 && is_linux) {
|
|
entry_point = ep;
|
|
} else {
|
|
error_report("could not load kernel '%s'",
|
|
kernel_filename);
|
|
exit(EXIT_FAILURE);
|
|
}
|
|
}
|
|
if (entry_point != env->pc) {
|
|
uint8_t boot[] = {
|
|
#ifdef TARGET_WORDS_BIGENDIAN
|
|
0x60, 0x00, 0x08, /* j 1f */
|
|
0x00, /* .literal_position */
|
|
0x00, 0x00, 0x00, 0x00, /* .literal entry_pc */
|
|
0x00, 0x00, 0x00, 0x00, /* .literal entry_a2 */
|
|
/* 1: */
|
|
0x10, 0xff, 0xfe, /* l32r a0, entry_pc */
|
|
0x12, 0xff, 0xfe, /* l32r a2, entry_a2 */
|
|
0x0a, 0x00, 0x00, /* jx a0 */
|
|
#else
|
|
0x06, 0x02, 0x00, /* j 1f */
|
|
0x00, /* .literal_position */
|
|
0x00, 0x00, 0x00, 0x00, /* .literal entry_pc */
|
|
0x00, 0x00, 0x00, 0x00, /* .literal entry_a2 */
|
|
/* 1: */
|
|
0x01, 0xfe, 0xff, /* l32r a0, entry_pc */
|
|
0x21, 0xfe, 0xff, /* l32r a2, entry_a2 */
|
|
0xa0, 0x00, 0x00, /* jx a0 */
|
|
#endif
|
|
};
|
|
uint32_t entry_pc = tswap32(entry_point);
|
|
uint32_t entry_a2 = tswap32(tagptr);
|
|
|
|
memcpy(boot + 4, &entry_pc, sizeof(entry_pc));
|
|
memcpy(boot + 8, &entry_a2, sizeof(entry_a2));
|
|
cpu_physical_memory_write(env->pc, boot, sizeof(boot));
|
|
}
|
|
} else {
|
|
if (flash) {
|
|
MemoryRegion *flash_mr = pflash_cfi01_get_memory(flash);
|
|
MemoryRegion *flash_io = g_malloc(sizeof(*flash_io));
|
|
uint32_t size = env->config->sysrom.location[0].size;
|
|
|
|
if (board->flash->size - board->flash->boot_base < size) {
|
|
size = board->flash->size - board->flash->boot_base;
|
|
}
|
|
|
|
memory_region_init_alias(flash_io, NULL, "xtfpga.flash",
|
|
flash_mr, board->flash->boot_base, size);
|
|
memory_region_add_subregion(system_memory,
|
|
env->config->sysrom.location[0].addr,
|
|
flash_io);
|
|
} else {
|
|
xtensa_create_memory_regions(&env->config->sysrom, "xtensa.sysrom",
|
|
system_memory);
|
|
}
|
|
}
|
|
}
|
|
|
|
static const hwaddr xtfpga_mmu_io[2] = {
|
|
0xf0000000,
|
|
};
|
|
|
|
static const hwaddr xtfpga_nommu_io[2] = {
|
|
0x90000000,
|
|
0x70000000,
|
|
};
|
|
|
|
static const XtfpgaFlashDesc lx60_flash = {
|
|
.base = 0x08000000,
|
|
.size = 0x00400000,
|
|
.sector_size = 0x10000,
|
|
};
|
|
|
|
static void xtfpga_lx60_init(MachineState *machine)
|
|
{
|
|
static const XtfpgaBoardDesc lx60_board = {
|
|
.flash = &lx60_flash,
|
|
.sram_size = 0x20000,
|
|
.io = xtfpga_mmu_io,
|
|
};
|
|
xtfpga_init(&lx60_board, machine);
|
|
}
|
|
|
|
static void xtfpga_lx60_nommu_init(MachineState *machine)
|
|
{
|
|
static const XtfpgaBoardDesc lx60_board = {
|
|
.flash = &lx60_flash,
|
|
.sram_size = 0x20000,
|
|
.io = xtfpga_nommu_io,
|
|
};
|
|
xtfpga_init(&lx60_board, machine);
|
|
}
|
|
|
|
static const XtfpgaFlashDesc lx200_flash = {
|
|
.base = 0x08000000,
|
|
.size = 0x01000000,
|
|
.sector_size = 0x20000,
|
|
};
|
|
|
|
static void xtfpga_lx200_init(MachineState *machine)
|
|
{
|
|
static const XtfpgaBoardDesc lx200_board = {
|
|
.flash = &lx200_flash,
|
|
.sram_size = 0x2000000,
|
|
.io = xtfpga_mmu_io,
|
|
};
|
|
xtfpga_init(&lx200_board, machine);
|
|
}
|
|
|
|
static void xtfpga_lx200_nommu_init(MachineState *machine)
|
|
{
|
|
static const XtfpgaBoardDesc lx200_board = {
|
|
.flash = &lx200_flash,
|
|
.sram_size = 0x2000000,
|
|
.io = xtfpga_nommu_io,
|
|
};
|
|
xtfpga_init(&lx200_board, machine);
|
|
}
|
|
|
|
static const XtfpgaFlashDesc ml605_flash = {
|
|
.base = 0x08000000,
|
|
.size = 0x01000000,
|
|
.sector_size = 0x20000,
|
|
};
|
|
|
|
static void xtfpga_ml605_init(MachineState *machine)
|
|
{
|
|
static const XtfpgaBoardDesc ml605_board = {
|
|
.flash = &ml605_flash,
|
|
.sram_size = 0x2000000,
|
|
.io = xtfpga_mmu_io,
|
|
};
|
|
xtfpga_init(&ml605_board, machine);
|
|
}
|
|
|
|
static void xtfpga_ml605_nommu_init(MachineState *machine)
|
|
{
|
|
static const XtfpgaBoardDesc ml605_board = {
|
|
.flash = &ml605_flash,
|
|
.sram_size = 0x2000000,
|
|
.io = xtfpga_nommu_io,
|
|
};
|
|
xtfpga_init(&ml605_board, machine);
|
|
}
|
|
|
|
static const XtfpgaFlashDesc kc705_flash = {
|
|
.base = 0x00000000,
|
|
.size = 0x08000000,
|
|
.boot_base = 0x06000000,
|
|
.sector_size = 0x20000,
|
|
};
|
|
|
|
static void xtfpga_kc705_init(MachineState *machine)
|
|
{
|
|
static const XtfpgaBoardDesc kc705_board = {
|
|
.flash = &kc705_flash,
|
|
.sram_size = 0x2000000,
|
|
.io = xtfpga_mmu_io,
|
|
};
|
|
xtfpga_init(&kc705_board, machine);
|
|
}
|
|
|
|
static void xtfpga_kc705_nommu_init(MachineState *machine)
|
|
{
|
|
static const XtfpgaBoardDesc kc705_board = {
|
|
.flash = &kc705_flash,
|
|
.sram_size = 0x2000000,
|
|
.io = xtfpga_nommu_io,
|
|
};
|
|
xtfpga_init(&kc705_board, machine);
|
|
}
|
|
|
|
static void xtfpga_lx60_class_init(ObjectClass *oc, void *data)
|
|
{
|
|
MachineClass *mc = MACHINE_CLASS(oc);
|
|
|
|
mc->desc = "lx60 EVB (" XTENSA_DEFAULT_CPU_MODEL ")";
|
|
mc->init = xtfpga_lx60_init;
|
|
mc->max_cpus = 4;
|
|
mc->default_cpu_type = XTENSA_DEFAULT_CPU_TYPE;
|
|
}
|
|
|
|
static const TypeInfo xtfpga_lx60_type = {
|
|
.name = MACHINE_TYPE_NAME("lx60"),
|
|
.parent = TYPE_MACHINE,
|
|
.class_init = xtfpga_lx60_class_init,
|
|
};
|
|
|
|
static void xtfpga_lx60_nommu_class_init(ObjectClass *oc, void *data)
|
|
{
|
|
MachineClass *mc = MACHINE_CLASS(oc);
|
|
|
|
mc->desc = "lx60 noMMU EVB (" XTENSA_DEFAULT_CPU_MODEL ")";
|
|
mc->init = xtfpga_lx60_nommu_init;
|
|
mc->max_cpus = 4;
|
|
mc->default_cpu_type = XTENSA_DEFAULT_CPU_TYPE;
|
|
}
|
|
|
|
static const TypeInfo xtfpga_lx60_nommu_type = {
|
|
.name = MACHINE_TYPE_NAME("lx60-nommu"),
|
|
.parent = TYPE_MACHINE,
|
|
.class_init = xtfpga_lx60_nommu_class_init,
|
|
};
|
|
|
|
static void xtfpga_lx200_class_init(ObjectClass *oc, void *data)
|
|
{
|
|
MachineClass *mc = MACHINE_CLASS(oc);
|
|
|
|
mc->desc = "lx200 EVB (" XTENSA_DEFAULT_CPU_MODEL ")";
|
|
mc->init = xtfpga_lx200_init;
|
|
mc->max_cpus = 4;
|
|
mc->default_cpu_type = XTENSA_DEFAULT_CPU_TYPE;
|
|
}
|
|
|
|
static const TypeInfo xtfpga_lx200_type = {
|
|
.name = MACHINE_TYPE_NAME("lx200"),
|
|
.parent = TYPE_MACHINE,
|
|
.class_init = xtfpga_lx200_class_init,
|
|
};
|
|
|
|
static void xtfpga_lx200_nommu_class_init(ObjectClass *oc, void *data)
|
|
{
|
|
MachineClass *mc = MACHINE_CLASS(oc);
|
|
|
|
mc->desc = "lx200 noMMU EVB (" XTENSA_DEFAULT_CPU_MODEL ")";
|
|
mc->init = xtfpga_lx200_nommu_init;
|
|
mc->max_cpus = 4;
|
|
mc->default_cpu_type = XTENSA_DEFAULT_CPU_TYPE;
|
|
}
|
|
|
|
static const TypeInfo xtfpga_lx200_nommu_type = {
|
|
.name = MACHINE_TYPE_NAME("lx200-nommu"),
|
|
.parent = TYPE_MACHINE,
|
|
.class_init = xtfpga_lx200_nommu_class_init,
|
|
};
|
|
|
|
static void xtfpga_ml605_class_init(ObjectClass *oc, void *data)
|
|
{
|
|
MachineClass *mc = MACHINE_CLASS(oc);
|
|
|
|
mc->desc = "ml605 EVB (" XTENSA_DEFAULT_CPU_MODEL ")";
|
|
mc->init = xtfpga_ml605_init;
|
|
mc->max_cpus = 4;
|
|
mc->default_cpu_type = XTENSA_DEFAULT_CPU_TYPE;
|
|
}
|
|
|
|
static const TypeInfo xtfpga_ml605_type = {
|
|
.name = MACHINE_TYPE_NAME("ml605"),
|
|
.parent = TYPE_MACHINE,
|
|
.class_init = xtfpga_ml605_class_init,
|
|
};
|
|
|
|
static void xtfpga_ml605_nommu_class_init(ObjectClass *oc, void *data)
|
|
{
|
|
MachineClass *mc = MACHINE_CLASS(oc);
|
|
|
|
mc->desc = "ml605 noMMU EVB (" XTENSA_DEFAULT_CPU_MODEL ")";
|
|
mc->init = xtfpga_ml605_nommu_init;
|
|
mc->max_cpus = 4;
|
|
mc->default_cpu_type = XTENSA_DEFAULT_CPU_TYPE;
|
|
}
|
|
|
|
static const TypeInfo xtfpga_ml605_nommu_type = {
|
|
.name = MACHINE_TYPE_NAME("ml605-nommu"),
|
|
.parent = TYPE_MACHINE,
|
|
.class_init = xtfpga_ml605_nommu_class_init,
|
|
};
|
|
|
|
static void xtfpga_kc705_class_init(ObjectClass *oc, void *data)
|
|
{
|
|
MachineClass *mc = MACHINE_CLASS(oc);
|
|
|
|
mc->desc = "kc705 EVB (" XTENSA_DEFAULT_CPU_MODEL ")";
|
|
mc->init = xtfpga_kc705_init;
|
|
mc->max_cpus = 4;
|
|
mc->default_cpu_type = XTENSA_DEFAULT_CPU_TYPE;
|
|
}
|
|
|
|
static const TypeInfo xtfpga_kc705_type = {
|
|
.name = MACHINE_TYPE_NAME("kc705"),
|
|
.parent = TYPE_MACHINE,
|
|
.class_init = xtfpga_kc705_class_init,
|
|
};
|
|
|
|
static void xtfpga_kc705_nommu_class_init(ObjectClass *oc, void *data)
|
|
{
|
|
MachineClass *mc = MACHINE_CLASS(oc);
|
|
|
|
mc->desc = "kc705 noMMU EVB (" XTENSA_DEFAULT_CPU_MODEL ")";
|
|
mc->init = xtfpga_kc705_nommu_init;
|
|
mc->max_cpus = 4;
|
|
mc->default_cpu_type = XTENSA_DEFAULT_CPU_TYPE;
|
|
}
|
|
|
|
static const TypeInfo xtfpga_kc705_nommu_type = {
|
|
.name = MACHINE_TYPE_NAME("kc705-nommu"),
|
|
.parent = TYPE_MACHINE,
|
|
.class_init = xtfpga_kc705_nommu_class_init,
|
|
};
|
|
|
|
static void xtfpga_machines_init(void)
|
|
{
|
|
type_register_static(&xtfpga_lx60_type);
|
|
type_register_static(&xtfpga_lx200_type);
|
|
type_register_static(&xtfpga_ml605_type);
|
|
type_register_static(&xtfpga_kc705_type);
|
|
type_register_static(&xtfpga_lx60_nommu_type);
|
|
type_register_static(&xtfpga_lx200_nommu_type);
|
|
type_register_static(&xtfpga_ml605_nommu_type);
|
|
type_register_static(&xtfpga_kc705_nommu_type);
|
|
}
|
|
|
|
type_init(xtfpga_machines_init)
|