mirror of
https://github.com/xemu-project/xemu.git
synced 2024-12-01 07:21:09 +00:00
c165473269
We set default boot order "cad" in every single machine definition except "pseries" and "moxiesim", even though very few boards actually care for boot order, and "cad" makes sense for even fewer. Machines that care: * pc and its variants Accept up to three letters 'a', 'b' (undocumented alias for 'a'), 'c', 'd' and 'n'. Reject all others (fatal with -boot). * nseries (n800, n810) Check whether order starts with 'n'. Silently ignored otherwise. * prep, g3beige, mac99 Extract the first character the machine understands (subset of 'a'..'f'). Silently ignored otherwise. * spapr Accept an arbitrary string (vl.c restricts it to contain only 'a'..'p', no duplicates). * sun4[mdc] Use the first character. Silently ignored otherwise. Strip characters these machines ignore from their default boot order. For all other machines, remove the unused default boot order alltogether. Note that my rename of QEMUMachine member boot_order to default_boot_order and QEMUMachineInitArgs member boot_device to boot_order has a welcome side effect: it makes every use of boot orders visible in this patch, for easy review. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Laszlo Ersek <lersek@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
302 lines
8.1 KiB
C
302 lines
8.1 KiB
C
/* vim:set shiftwidth=4 ts=4 et: */
|
|
/*
|
|
* PXA255 Sharp Zaurus SL-6000 PDA platform
|
|
*
|
|
* Copyright (c) 2008 Dmitry Baryshkov
|
|
*
|
|
* Code based on spitz platform by Andrzej Zaborowski <balrog@zabor.org>
|
|
* This code is licensed under the GNU GPL v2.
|
|
*
|
|
* Contributions after 2012-01-13 are licensed under the terms of the
|
|
* GNU GPL, version 2 or (at your option) any later version.
|
|
*/
|
|
|
|
#include "hw/hw.h"
|
|
#include "hw/arm/pxa.h"
|
|
#include "hw/arm/arm.h"
|
|
#include "hw/devices.h"
|
|
#include "hw/arm/sharpsl.h"
|
|
#include "hw/pcmcia.h"
|
|
#include "block/block.h"
|
|
#include "hw/boards.h"
|
|
#include "hw/i2c/i2c.h"
|
|
#include "hw/ssi.h"
|
|
#include "sysemu/blockdev.h"
|
|
#include "hw/sysbus.h"
|
|
#include "exec/address-spaces.h"
|
|
|
|
#define TOSA_RAM 0x04000000
|
|
#define TOSA_ROM 0x00800000
|
|
|
|
#define TOSA_GPIO_USB_IN (5)
|
|
#define TOSA_GPIO_nSD_DETECT (9)
|
|
#define TOSA_GPIO_ON_RESET (19)
|
|
#define TOSA_GPIO_CF_IRQ (21) /* CF slot0 Ready */
|
|
#define TOSA_GPIO_CF_CD (13)
|
|
#define TOSA_GPIO_TC6393XB_INT (15)
|
|
#define TOSA_GPIO_JC_CF_IRQ (36) /* CF slot1 Ready */
|
|
|
|
#define TOSA_SCOOP_GPIO_BASE 1
|
|
#define TOSA_GPIO_IR_POWERDWN (TOSA_SCOOP_GPIO_BASE + 2)
|
|
#define TOSA_GPIO_SD_WP (TOSA_SCOOP_GPIO_BASE + 3)
|
|
#define TOSA_GPIO_PWR_ON (TOSA_SCOOP_GPIO_BASE + 4)
|
|
|
|
#define TOSA_SCOOP_JC_GPIO_BASE 1
|
|
#define TOSA_GPIO_BT_LED (TOSA_SCOOP_JC_GPIO_BASE + 0)
|
|
#define TOSA_GPIO_NOTE_LED (TOSA_SCOOP_JC_GPIO_BASE + 1)
|
|
#define TOSA_GPIO_CHRG_ERR_LED (TOSA_SCOOP_JC_GPIO_BASE + 2)
|
|
#define TOSA_GPIO_TC6393XB_L3V_ON (TOSA_SCOOP_JC_GPIO_BASE + 5)
|
|
#define TOSA_GPIO_WLAN_LED (TOSA_SCOOP_JC_GPIO_BASE + 7)
|
|
|
|
#define DAC_BASE 0x4e
|
|
#define DAC_CH1 0
|
|
#define DAC_CH2 1
|
|
|
|
static void tosa_microdrive_attach(PXA2xxState *cpu)
|
|
{
|
|
PCMCIACardState *md;
|
|
DriveInfo *dinfo;
|
|
|
|
dinfo = drive_get(IF_IDE, 0, 0);
|
|
if (!dinfo || dinfo->media_cd)
|
|
return;
|
|
md = dscm1xxxx_init(dinfo);
|
|
pxa2xx_pcmcia_attach(cpu->pcmcia[0], md);
|
|
}
|
|
|
|
static void tosa_out_switch(void *opaque, int line, int level)
|
|
{
|
|
switch (line) {
|
|
case 0:
|
|
fprintf(stderr, "blue LED %s.\n", level ? "on" : "off");
|
|
break;
|
|
case 1:
|
|
fprintf(stderr, "green LED %s.\n", level ? "on" : "off");
|
|
break;
|
|
case 2:
|
|
fprintf(stderr, "amber LED %s.\n", level ? "on" : "off");
|
|
break;
|
|
case 3:
|
|
fprintf(stderr, "wlan LED %s.\n", level ? "on" : "off");
|
|
break;
|
|
default:
|
|
fprintf(stderr, "Uhandled out event: %d = %d\n", line, level);
|
|
break;
|
|
}
|
|
}
|
|
|
|
|
|
static void tosa_gpio_setup(PXA2xxState *cpu,
|
|
DeviceState *scp0,
|
|
DeviceState *scp1,
|
|
TC6393xbState *tmio)
|
|
{
|
|
qemu_irq *outsignals = qemu_allocate_irqs(tosa_out_switch, cpu, 4);
|
|
/* MMC/SD host */
|
|
pxa2xx_mmci_handlers(cpu->mmc,
|
|
qdev_get_gpio_in(scp0, TOSA_GPIO_SD_WP),
|
|
qemu_irq_invert(qdev_get_gpio_in(cpu->gpio, TOSA_GPIO_nSD_DETECT)));
|
|
|
|
/* Handle reset */
|
|
qdev_connect_gpio_out(cpu->gpio, TOSA_GPIO_ON_RESET, cpu->reset);
|
|
|
|
/* PCMCIA signals: card's IRQ and Card-Detect */
|
|
pxa2xx_pcmcia_set_irq_cb(cpu->pcmcia[0],
|
|
qdev_get_gpio_in(cpu->gpio, TOSA_GPIO_CF_IRQ),
|
|
qdev_get_gpio_in(cpu->gpio, TOSA_GPIO_CF_CD));
|
|
|
|
pxa2xx_pcmcia_set_irq_cb(cpu->pcmcia[1],
|
|
qdev_get_gpio_in(cpu->gpio, TOSA_GPIO_JC_CF_IRQ),
|
|
NULL);
|
|
|
|
qdev_connect_gpio_out(scp1, TOSA_GPIO_BT_LED, outsignals[0]);
|
|
qdev_connect_gpio_out(scp1, TOSA_GPIO_NOTE_LED, outsignals[1]);
|
|
qdev_connect_gpio_out(scp1, TOSA_GPIO_CHRG_ERR_LED, outsignals[2]);
|
|
qdev_connect_gpio_out(scp1, TOSA_GPIO_WLAN_LED, outsignals[3]);
|
|
|
|
qdev_connect_gpio_out(scp1, TOSA_GPIO_TC6393XB_L3V_ON, tc6393xb_l3v_get(tmio));
|
|
|
|
/* UDC Vbus */
|
|
qemu_irq_raise(qdev_get_gpio_in(cpu->gpio, TOSA_GPIO_USB_IN));
|
|
}
|
|
|
|
static uint32_t tosa_ssp_tansfer(SSISlave *dev, uint32_t value)
|
|
{
|
|
fprintf(stderr, "TG: %d %02x\n", value >> 5, value & 0x1f);
|
|
return 0;
|
|
}
|
|
|
|
static int tosa_ssp_init(SSISlave *dev)
|
|
{
|
|
/* Nothing to do. */
|
|
return 0;
|
|
}
|
|
|
|
typedef struct {
|
|
I2CSlave i2c;
|
|
int len;
|
|
char buf[3];
|
|
} TosaDACState;
|
|
|
|
static int tosa_dac_send(I2CSlave *i2c, uint8_t data)
|
|
{
|
|
TosaDACState *s = FROM_I2C_SLAVE(TosaDACState, i2c);
|
|
s->buf[s->len] = data;
|
|
if (s->len ++ > 2) {
|
|
#ifdef VERBOSE
|
|
fprintf(stderr, "%s: message too long (%i bytes)\n", __FUNCTION__, s->len);
|
|
#endif
|
|
return 1;
|
|
}
|
|
|
|
if (s->len == 2) {
|
|
fprintf(stderr, "dac: channel %d value 0x%02x\n",
|
|
s->buf[0], s->buf[1]);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void tosa_dac_event(I2CSlave *i2c, enum i2c_event event)
|
|
{
|
|
TosaDACState *s = FROM_I2C_SLAVE(TosaDACState, i2c);
|
|
s->len = 0;
|
|
switch (event) {
|
|
case I2C_START_SEND:
|
|
break;
|
|
case I2C_START_RECV:
|
|
printf("%s: recv not supported!!!\n", __FUNCTION__);
|
|
break;
|
|
case I2C_FINISH:
|
|
#ifdef VERBOSE
|
|
if (s->len < 2)
|
|
printf("%s: message too short (%i bytes)\n", __FUNCTION__, s->len);
|
|
if (s->len > 2)
|
|
printf("%s: message too long\n", __FUNCTION__);
|
|
#endif
|
|
break;
|
|
default:
|
|
break;
|
|
}
|
|
}
|
|
|
|
static int tosa_dac_recv(I2CSlave *s)
|
|
{
|
|
printf("%s: recv not supported!!!\n", __FUNCTION__);
|
|
return -1;
|
|
}
|
|
|
|
static int tosa_dac_init(I2CSlave *i2c)
|
|
{
|
|
/* Nothing to do. */
|
|
return 0;
|
|
}
|
|
|
|
static void tosa_tg_init(PXA2xxState *cpu)
|
|
{
|
|
i2c_bus *bus = pxa2xx_i2c_bus(cpu->i2c[0]);
|
|
i2c_create_slave(bus, "tosa_dac", DAC_BASE);
|
|
ssi_create_slave(cpu->ssp[1], "tosa-ssp");
|
|
}
|
|
|
|
|
|
static struct arm_boot_info tosa_binfo = {
|
|
.loader_start = PXA2XX_SDRAM_BASE,
|
|
.ram_size = 0x04000000,
|
|
};
|
|
|
|
static void tosa_init(QEMUMachineInitArgs *args)
|
|
{
|
|
const char *cpu_model = args->cpu_model;
|
|
const char *kernel_filename = args->kernel_filename;
|
|
const char *kernel_cmdline = args->kernel_cmdline;
|
|
const char *initrd_filename = args->initrd_filename;
|
|
MemoryRegion *address_space_mem = get_system_memory();
|
|
MemoryRegion *rom = g_new(MemoryRegion, 1);
|
|
PXA2xxState *mpu;
|
|
TC6393xbState *tmio;
|
|
DeviceState *scp0, *scp1;
|
|
|
|
if (!cpu_model)
|
|
cpu_model = "pxa255";
|
|
|
|
mpu = pxa255_init(address_space_mem, tosa_binfo.ram_size);
|
|
|
|
memory_region_init_ram(rom, NULL, "tosa.rom", TOSA_ROM);
|
|
vmstate_register_ram_global(rom);
|
|
memory_region_set_readonly(rom, true);
|
|
memory_region_add_subregion(address_space_mem, 0, rom);
|
|
|
|
tmio = tc6393xb_init(address_space_mem, 0x10000000,
|
|
qdev_get_gpio_in(mpu->gpio, TOSA_GPIO_TC6393XB_INT));
|
|
|
|
scp0 = sysbus_create_simple("scoop", 0x08800000, NULL);
|
|
scp1 = sysbus_create_simple("scoop", 0x14800040, NULL);
|
|
|
|
tosa_gpio_setup(mpu, scp0, scp1, tmio);
|
|
|
|
tosa_microdrive_attach(mpu);
|
|
|
|
tosa_tg_init(mpu);
|
|
|
|
tosa_binfo.kernel_filename = kernel_filename;
|
|
tosa_binfo.kernel_cmdline = kernel_cmdline;
|
|
tosa_binfo.initrd_filename = initrd_filename;
|
|
tosa_binfo.board_id = 0x208;
|
|
arm_load_kernel(mpu->cpu, &tosa_binfo);
|
|
sl_bootparam_write(SL_PXA_PARAM_BASE);
|
|
}
|
|
|
|
static QEMUMachine tosapda_machine = {
|
|
.name = "tosa",
|
|
.desc = "Tosa PDA (PXA255)",
|
|
.init = tosa_init,
|
|
};
|
|
|
|
static void tosapda_machine_init(void)
|
|
{
|
|
qemu_register_machine(&tosapda_machine);
|
|
}
|
|
|
|
machine_init(tosapda_machine_init);
|
|
|
|
static void tosa_dac_class_init(ObjectClass *klass, void *data)
|
|
{
|
|
I2CSlaveClass *k = I2C_SLAVE_CLASS(klass);
|
|
|
|
k->init = tosa_dac_init;
|
|
k->event = tosa_dac_event;
|
|
k->recv = tosa_dac_recv;
|
|
k->send = tosa_dac_send;
|
|
}
|
|
|
|
static const TypeInfo tosa_dac_info = {
|
|
.name = "tosa_dac",
|
|
.parent = TYPE_I2C_SLAVE,
|
|
.instance_size = sizeof(TosaDACState),
|
|
.class_init = tosa_dac_class_init,
|
|
};
|
|
|
|
static void tosa_ssp_class_init(ObjectClass *klass, void *data)
|
|
{
|
|
SSISlaveClass *k = SSI_SLAVE_CLASS(klass);
|
|
|
|
k->init = tosa_ssp_init;
|
|
k->transfer = tosa_ssp_tansfer;
|
|
}
|
|
|
|
static const TypeInfo tosa_ssp_info = {
|
|
.name = "tosa-ssp",
|
|
.parent = TYPE_SSI_SLAVE,
|
|
.instance_size = sizeof(SSISlave),
|
|
.class_init = tosa_ssp_class_init,
|
|
};
|
|
|
|
static void tosa_register_types(void)
|
|
{
|
|
type_register_static(&tosa_dac_info);
|
|
type_register_static(&tosa_ssp_info);
|
|
}
|
|
|
|
type_init(tosa_register_types)
|