Andrew Jeffery 87e79af074 palmetto-bmc: Configure the SCU's hardware strapping register ... The magic constant configures the following options: * 28:27: Configure DRAM size as 256MB * 26:24: DDR3 SDRAM with CL = 6, CWL = 5 * 23: Configure 24/48MHz CLKIN * 22: Disable GPIOE pass-through mode * 21: Disable GPIOD pass-through mode * 20: Enable LPC decode of SuperIO 0x2E/0x4E addresses * 19: Disable ACPI * 18: Configure 48MHz CLKIN * 17: Disable BMC 2nd boot watchdog timer * 16: Decode SuperIO address 0x2E * 15: VGA Class Code * 14: Enable LPC dedicated reset pin * 13:12: Enable SPI Master and SPI Slave to AHB Bridge * 11:10: Select CPU:AHB ratio = 2:1 * 9:8: Select 384MHz H-PLL * 7: Configure MAC#2 for RMII/NCSI * 6: Configure MAC#1 for RMII/NCSI * 5: No VGA BIOS ROM * 4: Boot using 32bit SPI address mode * 3:2: Select 16MB VGA memory * 1:0: Boot from SPI flash memory Signed-off-by: Andrew Jeffery <andrew@aj.id.au> Reviewed-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Tested-by: Cédric Le Goater <clg@kaod.org> Message-id: 1466744305-23163-4-git-send-email-andrew@aj.id.au Signed-off-by: Peter Maydell <peter.maydell@linaro.org>		2016-06-27 15:37:33 +01:00
..
allwinner-a10.c	hw: explicitly include qemu-common.h and cpu.h	2016-03-22 22:20:17 +01:00
armv7m.c	hw/arm: QOM'ify armv7m.c	2016-05-12 13:40:48 +01:00
ast2400.c	ast2400: Integrate the SCU model and set silicon revision	2016-06-27 15:37:33 +01:00
bcm2835_peripherals.c	hw/char: QOM'ify pl011 model	2016-06-06 16:59:31 +01:00
bcm2836.c	hw/arm/bcm2836: Wire up CPU timer interrupts correctly	2016-04-04 17:33:51 +01:00
boot.c	ARM: Virt: Set numa-node-id for cpu and memory nodes	2016-05-12 13:22:27 +01:00
collie.c	explicitly include qom/cpu.h	2016-05-19 16:42:27 +02:00
cubieboard.c	hw: explicitly include qemu-common.h and cpu.h	2016-03-22 22:20:17 +01:00
digic_boards.c	hw: explicitly include qemu-common.h and cpu.h	2016-03-22 22:20:17 +01:00
digic.c	hw/char: QOM'ify digic-uart model	2016-06-06 16:59:31 +01:00
exynos4_boards.c	hw: explicitly include qemu-common.h and cpu.h	2016-03-22 22:20:17 +01:00
exynos4210.c	hw: explicitly include qemu-common.h and cpu.h	2016-03-22 22:20:17 +01:00
fsl-imx6.c	Add ENET device to i.MX6 SOC.	2016-06-02 10:42:46 +08:00
fsl-imx25.c	Add ENET/Gbps Ethernet support to FEC device	2016-06-02 10:42:46 +08:00
fsl-imx31.c	hw: explicitly include qemu-common.h and cpu.h	2016-03-22 22:20:17 +01:00
gumstix.c	machine: Use type_init() to register machine classes	2016-03-16 15:34:05 -03:00
highbank.c	hw/char: QOM'ify pl011 model	2016-06-06 16:59:31 +01:00
imx25_pdk.c	hw: explicitly include qemu-common.h and cpu.h	2016-03-22 22:20:17 +01:00
integratorcp.c	hw/char: QOM'ify pl011 model	2016-06-06 16:59:31 +01:00
kzm.c	hw: explicitly include qemu-common.h and cpu.h	2016-03-22 22:20:17 +01:00
mainstone.c	include/qemu/osdep.h: Don't include qapi/error.h	2016-03-22 22:20:15 +01:00
Makefile.objs	i.MX: Add sabrelite i.MX6 emulation.	2016-05-12 13:22:29 +01:00
musicpal.c	hw: explicitly include qemu-common.h and cpu.h	2016-03-22 22:20:17 +01:00
netduino2.c	include/qemu/osdep.h: Don't include qapi/error.h	2016-03-22 22:20:15 +01:00
nseries.c	vl: Eliminate usb_enabled()	2016-06-13 13:24:41 +02:00
omap1.c	util: move declarations out of qemu-common.h	2016-03-22 22:20:17 +01:00
omap2.c	hw: explicitly include qemu-common.h and cpu.h	2016-03-22 22:20:17 +01:00
omap_sx1.c	include/qemu/osdep.h: Don't include qapi/error.h	2016-03-22 22:20:15 +01:00
palm.c	include/qemu/osdep.h: Don't include qapi/error.h	2016-03-22 22:20:15 +01:00
palmetto-bmc.c	palmetto-bmc: Configure the SCU's hardware strapping register	2016-06-27 15:37:33 +01:00
pxa2xx_gpio.c	hw: explicitly include qemu/log.h	2016-05-19 16:42:29 +02:00
pxa2xx_pic.c	hw/arm: QOM'ify pxa2xx_pic.c	2016-05-12 13:42:08 +01:00
pxa2xx.c	pxa2xx: Unconditionally enable USB controller	2016-06-13 13:24:41 +02:00
raspi.c	hw: explicitly include qemu-common.h and cpu.h	2016-03-22 22:20:17 +01:00
realview.c	vl: Eliminate usb_enabled()	2016-06-13 13:24:41 +02:00
sabrelite.c	i.MX: Add sabrelite i.MX6 emulation.	2016-05-12 13:22:29 +01:00
spitz.c	hw/arm: QOM'ify spitz.c	2016-05-12 13:42:09 +01:00
stellaris.c	hw/char: QOM'ify pl011 model	2016-06-06 16:59:31 +01:00
stm32f205_soc.c	hw/char: QOM'ify stm32f2xx_usart model	2016-06-06 16:59:32 +01:00
strongarm.c	hw: explicitly include qemu/log.h	2016-05-19 16:42:29 +02:00
strongarm.h	arm: include cpu-qom.h in files that require ARMCPU	2016-05-19 16:42:27 +02:00
sysbus-fdt.c	include/qemu/osdep.h: Don't include qapi/error.h	2016-03-22 22:20:15 +01:00
tosa.c	include/qemu/osdep.h: Don't include qapi/error.h	2016-03-22 22:20:15 +01:00
trace-events	trace: split out trace events for hw/arm/ directory	2016-06-20 17:22:16 +01:00
versatilepb.c	vl: Eliminate usb_enabled()	2016-06-13 13:24:41 +02:00
vexpress.c	hw/char: QOM'ify pl011 model	2016-06-06 16:59:31 +01:00
virt-acpi-build.c	ACPI: ARM: Present GIC version in MADT table	2016-06-17 15:23:51 +01:00
virt.c	hw/arm/virt: create the 2.7 machine type	2016-06-14 15:59:13 +01:00
xilinx_zynq.c	hw/char: QOM'ify cadence_uart model	2016-06-06 16:59:31 +01:00
xlnx-ep108.c	zynqmp: Add the ZCU102 board	2016-06-06 16:59:32 +01:00
xlnx-zynqmp.c	arm: xlnx-zynqmp: Add xlnx-dp and xlnx-dpdma	2016-06-14 16:01:03 +01:00
z2.c	ssi: Move ssi.h into a separate directory	2016-01-21 14:15:03 +00:00