xemu/hw/intc
Eric Auger 8a7348b5d6 hw/intc/arm_gicv3_its: Don't abort on table save failure
The ITS is not fully properly reset at the moment. Caches are
not emptied.

After a reset, in case we attempt to save the state before
the bound devices have registered their MSIs and after the
1st level table has been allocated by the ITS driver
(device BASER is valid), the first level entries are still
invalid. If the device cache is not empty (devices registered
before the reset), vgic_its_save_device_tables fails with -EINVAL.
This causes a QEMU abort().

Cc: qemu-stable@nongnu.org
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Reported-by: wanghaibin <wanghaibin.wang@huawei.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2017-11-07 13:03:52 +00:00
..
allwinner-a10-pic.c hw: explicitly include qemu/log.h 2016-05-19 16:42:29 +02:00
apic_common.c migration: pre_save return int 2017-09-27 11:35:59 +01:00
apic.c apic: add send_msi() to APICCommonClass 2016-10-17 15:44:49 -02:00
arm_gic_common.c migration: pre_save return int 2017-09-27 11:35:59 +01:00
arm_gic_kvm.c kvm-all: Pass an error object to kvm_device_access 2017-06-13 14:57:00 +01:00
arm_gic.c ARM: KVM: Enable in-kernel timers with user space gic 2017-07-11 11:21:26 +01:00
arm_gicv2m.c hw: explicitly include qemu/log.h 2016-05-19 16:42:29 +02:00
arm_gicv3_common.c migration: pre_save return int 2017-09-27 11:35:59 +01:00
arm_gicv3_cpuif.c arm_gicv3: Fix ICC_BPR1 reset value when EL3 not implemented 2017-06-07 17:21:44 +01:00
arm_gicv3_dist.c hw/intc/arm_gicv3: Fix compilation with simple trace backend 2016-06-20 11:35:15 +01:00
arm_gicv3_its_common.c migration: pre_save return int 2017-09-27 11:35:59 +01:00
arm_gicv3_its_kvm.c hw/intc/arm_gicv3_its: Don't abort on table save failure 2017-11-07 13:03:52 +00:00
arm_gicv3_kvm.c arm_gicv3_kvm: Fix compile warning 2017-09-04 17:13:53 +01:00
arm_gicv3_redist.c arm_gicv3: Add assert()s to tell Coverity that offsets are aligned 2016-07-19 17:56:27 +01:00
arm_gicv3.c hw/intc/arm_gicv3: Don't signal Pending+Active interrupts to CPU 2016-12-27 14:59:25 +00:00
armv7m_nvic.c nvic: Fix miscalculation of offsets into ITNS array 2017-10-12 16:33:16 +01:00
aspeed_vic.c hw: Clean up includes 2016-06-07 18:19:23 +03:00
bcm2835_ic.c hw: explicitly include qemu/log.h 2016-05-19 16:42:29 +02:00
bcm2836_control.c hw: explicitly include qemu/log.h 2016-05-19 16:42:29 +02:00
etraxfs_pic.c qdev: Replace cannot_instantiate_with_device_add_yet with !user_creatable 2017-05-17 10:37:00 -03:00
exynos4210_combiner.c hw/intc: QOM'ify exynos4210_combiner.c 2016-05-12 13:22:24 +01:00
exynos4210_gic.c hw/intc/exynos4210_gic: Constify array of combiner interrupts 2017-06-13 14:56:58 +01:00
gic_internal.h arm: gic: Remove references to NVIC 2017-02-28 12:08:17 +00:00
gicv3_internal.h target-arm: Add GICv3CPUState in CPUARMState struct 2017-02-28 17:10:00 +00:00
grlib_irqmp.c qdev: Replace cannot_instantiate_with_device_add_yet with !user_creatable 2017-05-17 10:37:00 -03:00
heathrow_pic.c hw/intc: Clean up includes 2016-01-29 15:07:24 +00:00
i8259_common.c migration: pre_save return int 2017-09-27 11:35:59 +01:00
i8259.c intc: make HMP 'info irq' and 'info pic' commands use InterruptStatsProvider interface 2016-10-04 10:00:25 +02:00
imx_avic.c hw: explicitly include qemu/log.h 2016-05-19 16:42:29 +02:00
intc.c intc: add an interface to gather statistics/informations on interrupt controllers 2016-10-04 10:00:25 +02:00
ioapic_common.c migration: pre_save return int 2017-09-27 11:35:59 +01:00
ioapic.c ioapic: Remove user_creatable flag 2017-05-17 10:37:01 -03:00
lm32_pic.c intc: make HMP 'info irq' and 'info pic' commands use InterruptStatsProvider interface 2016-10-04 10:00:25 +02:00
Makefile.objs openrisc/ompic: Add OpenRISC Multicore PIC (OMPIC) 2017-10-21 06:35:47 +09:00
mips_gic.c hw/mips_gic: Update pin state on mask changes 2017-02-21 22:24:58 +00:00
nios2_iic.c qdev: Replace cannot_instantiate_with_device_add_yet with !user_creatable 2017-05-17 10:37:00 -03:00
omap_intc.c qdev: Replace cannot_instantiate_with_device_add_yet with !user_creatable 2017-05-17 10:37:00 -03:00
ompic.c openrisc/ompic: Add OpenRISC Multicore PIC (OMPIC) 2017-10-21 06:35:47 +09:00
openpic_kvm.c memory: Switch memory from using AddressSpace to FlatView 2017-09-21 23:19:37 +02:00
openpic.c ppc: Fix OpenPIC model 2017-09-27 13:05:41 +10:00
pl190.c hw: explicitly include qemu/log.h 2016-05-19 16:42:29 +02:00
puv3_intc.c unicore: Clean up includes 2016-01-29 15:07:22 +00:00
realview_gic.c include/qemu/osdep.h: Don't include qapi/error.h 2016-03-22 22:20:15 +01:00
s390_flic_kvm.c migration: pre_save return int 2017-09-27 11:35:59 +01:00
s390_flic.c s390x/flic: migrate ais states 2017-07-14 12:29:49 +02:00
sh_intc.c hw: explicitly include qemu-common.h and cpu.h 2016-03-22 22:20:17 +01:00
slavio_intctl.c intc: make HMP 'info irq' and 'info pic' commands use InterruptStatsProvider interface 2016-10-04 10:00:25 +02:00
trace-events nvic: Support banked exceptions in acknowledge and complete 2017-09-21 16:31:09 +01:00
vgic_common.h intc/gic: Extract some reusable vGIC code 2015-09-24 01:29:36 +01:00
xics_kvm.c xics: drop ICPStateClass::cpu_setup() handler 2017-06-09 12:17:59 +10:00
xics_pnv.c xics: pass appropriate types to realize() handlers. 2017-06-09 12:12:34 +10:00
xics_spapr.c ppc/xics: simplify prototype of xics_spapr_init() 2017-05-24 11:39:52 +10:00
xics.c migration: pre_save return int 2017-09-27 11:35:59 +01:00
xilinx_intc.c hw/intc: Clean up includes 2016-01-29 15:07:24 +00:00