mirror of
https://github.com/xemu-project/xemu.git
synced 2024-11-23 11:39:53 +00:00
fdefe51c28
For all targets that currently call tcg_gen_debug_insn_start, add CPU_LOG_TB_OP_OPT to the condition that gates it. This is useful for comparing optimization dumps, when the pre-optimization dump is merely noise. Signed-off-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net> |
||
|---|---|---|
| .. | ||
| cpu-qom.h | ||
| cpu.c | ||
| cpu.h | ||
| helper.c | ||
| helper.h | ||
| machine.c | ||
| Makefile.objs | ||
| op_helper.c | ||
| README | ||
| TODO | ||
| translate.c | ||
LatticeMico32 target -------------------- General ------- All opcodes including the JUART CSRs are supported. JTAG UART --------- JTAG UART is routed to a serial console device. For the current boards it is the second one. Ie to enable it in the qemu virtual console window use the following command line parameters: -serial vc -serial vc This will make serial0 (the lm32_uart) and serial1 (the JTAG UART) available as virtual consoles. Programmatically terminate the emulator ---------------------------------------- Originally neither the LatticeMico32 nor its peripherals support a mechanism to shut down the machine. Emulation aware programs can write to a to a special register within the system control block to shut down the virtual machine. For more details see hw/lm32_sys.c. The lm32-evr is the first BSP which instantiate this model. A (32 bit) write to 0xfff0000 causes a vm shutdown. Special instructions -------------------- The translation recognizes one special instruction to halt the cpu: and r0, r0, r0 On real hardware this instruction is a nop. It is not used by GCC and should (hopefully) not be used within hand-crafted assembly. Insert this instruction in your idle loop to reduce the cpu load on the host. Ignoring the MSB of the address bus ----------------------------------- Some SoC ignores the MSB on the address bus. Thus creating a shadow memory area. As a general rule, 0x00000000-0x7fffffff is cached, whereas 0x80000000-0xffffffff is not cached and used to access IO devices. This behaviour can be enabled with: cpu_lm32_set_phys_msb_ignore(env, 1);