mirror of
https://github.com/xemu-project/xemu.git
synced 2024-11-25 04:30:02 +00:00
d29d3d1f80
blockdev-snapshot returned an error if the overlay was already in use, which it defined as having any BlockBackend parent. This is in fact both too strict (some parents can tolerate the change of visible data caused by attaching a backing file) and too loose (some non-BlockBackend parents may not be happy with it). One important use case that is prevented by the too strict check is live storage migration with blockdev-mirror. Here, the target node is usually opened without a backing file so that the active layer is mirrored while its backing chain can be copied in the background. The backing chain should be attached to the mirror target node when finalising the job, just before switching the users of the source node to the new copy (at which point the mirror job still has a reference to the node). drive-mirror did this automatically, but with blockdev-mirror this is the job of the QMP client, so it needs a way to do this. blockdev-snapshot is the obvious way, so this patch makes it work in this scenario. The new condition is that no parent uses CONSISTENT_READ permissions. This will ensure that the operation will still be blocked when the node is attached to the guest device, so blockdev-snapshot remains safe. (For the sake of completeness, x-blockdev-reopen can be used to achieve the same, however it is a big hammer, performs the graph change completely unchecked and is still experimental. So even with the option of using x-blockdev-reopen, there are reasons why blockdev-snapshot should be able to perform this operation.) Signed-off-by: Kevin Wolf <kwolf@redhat.com> Message-Id: <20200310113831.27293-3-kwolf@redhat.com> Reviewed-by: Peter Krempa <pkrempa@redhat.com> Tested-by: Peter Krempa <pkrempa@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
117 lines
10 KiB
Plaintext
117 lines
10 KiB
Plaintext
QA output created by 085
|
|
Formatting 'TEST_DIR/t.IMGFMT.1', fmt=IMGFMT size=134217728
|
|
Formatting 'TEST_DIR/t.IMGFMT.2', fmt=IMGFMT size=134217728
|
|
|
|
=== Running QEMU ===
|
|
|
|
|
|
=== Sending capabilities ===
|
|
|
|
{ 'execute': 'qmp_capabilities' }
|
|
{"return": {}}
|
|
|
|
=== Create a single snapshot on virtio0 ===
|
|
|
|
{ 'execute': 'blockdev-snapshot-sync', 'arguments': { 'device': 'virtio0', 'snapshot-file':'TEST_DIR/1-snapshot-v0.IMGFMT', 'format': 'IMGFMT' } }
|
|
Formatting 'TEST_DIR/1-snapshot-v0.qcow2', fmt=qcow2 size=134217728 backing_file=TEST_DIR/t.qcow2.1 backing_fmt=qcow2 cluster_size=65536 lazy_refcounts=off refcount_bits=16
|
|
{"return": {}}
|
|
|
|
=== Invalid command - missing device and nodename ===
|
|
|
|
{ 'execute': 'blockdev-snapshot-sync', 'arguments': { 'snapshot-file':'TEST_DIR/1-snapshot-v0.IMGFMT', 'format': 'IMGFMT' } }
|
|
{"error": {"class": "GenericError", "desc": "Cannot find device= nor node_name="}}
|
|
|
|
=== Invalid command - missing snapshot-file ===
|
|
|
|
{ 'execute': 'blockdev-snapshot-sync', 'arguments': { 'device': 'virtio0', 'format': 'IMGFMT' } }
|
|
{"error": {"class": "GenericError", "desc": "Parameter 'snapshot-file' is missing"}}
|
|
|
|
|
|
=== Create several transactional group snapshots ===
|
|
|
|
{ 'execute': 'transaction', 'arguments': {'actions': [ { 'type': 'blockdev-snapshot-sync', 'data' : { 'device': 'virtio0', 'snapshot-file': 'TEST_DIR/2-snapshot-v0.IMGFMT' } }, { 'type': 'blockdev-snapshot-sync', 'data' : { 'device': 'virtio1', 'snapshot-file': 'TEST_DIR/2-snapshot-v1.IMGFMT' } } ] } }
|
|
Formatting 'TEST_DIR/2-snapshot-v0.qcow2', fmt=qcow2 size=134217728 backing_file=TEST_DIR/1-snapshot-v0.qcow2 backing_fmt=qcow2 cluster_size=65536 lazy_refcounts=off refcount_bits=16
|
|
Formatting 'TEST_DIR/2-snapshot-v1.qcow2', fmt=qcow2 size=134217728 backing_file=TEST_DIR/t.qcow2.2 backing_fmt=qcow2 cluster_size=65536 lazy_refcounts=off refcount_bits=16
|
|
{"return": {}}
|
|
{ 'execute': 'transaction', 'arguments': {'actions': [ { 'type': 'blockdev-snapshot-sync', 'data' : { 'device': 'virtio0', 'snapshot-file': 'TEST_DIR/3-snapshot-v0.IMGFMT' } }, { 'type': 'blockdev-snapshot-sync', 'data' : { 'device': 'virtio1', 'snapshot-file': 'TEST_DIR/3-snapshot-v1.IMGFMT' } } ] } }
|
|
Formatting 'TEST_DIR/3-snapshot-v0.qcow2', fmt=qcow2 size=134217728 backing_file=TEST_DIR/2-snapshot-v0.qcow2 backing_fmt=qcow2 cluster_size=65536 lazy_refcounts=off refcount_bits=16
|
|
Formatting 'TEST_DIR/3-snapshot-v1.qcow2', fmt=qcow2 size=134217728 backing_file=TEST_DIR/2-snapshot-v1.qcow2 backing_fmt=qcow2 cluster_size=65536 lazy_refcounts=off refcount_bits=16
|
|
{"return": {}}
|
|
{ 'execute': 'transaction', 'arguments': {'actions': [ { 'type': 'blockdev-snapshot-sync', 'data' : { 'device': 'virtio0', 'snapshot-file': 'TEST_DIR/4-snapshot-v0.IMGFMT' } }, { 'type': 'blockdev-snapshot-sync', 'data' : { 'device': 'virtio1', 'snapshot-file': 'TEST_DIR/4-snapshot-v1.IMGFMT' } } ] } }
|
|
Formatting 'TEST_DIR/4-snapshot-v0.qcow2', fmt=qcow2 size=134217728 backing_file=TEST_DIR/3-snapshot-v0.qcow2 backing_fmt=qcow2 cluster_size=65536 lazy_refcounts=off refcount_bits=16
|
|
Formatting 'TEST_DIR/4-snapshot-v1.qcow2', fmt=qcow2 size=134217728 backing_file=TEST_DIR/3-snapshot-v1.qcow2 backing_fmt=qcow2 cluster_size=65536 lazy_refcounts=off refcount_bits=16
|
|
{"return": {}}
|
|
{ 'execute': 'transaction', 'arguments': {'actions': [ { 'type': 'blockdev-snapshot-sync', 'data' : { 'device': 'virtio0', 'snapshot-file': 'TEST_DIR/5-snapshot-v0.IMGFMT' } }, { 'type': 'blockdev-snapshot-sync', 'data' : { 'device': 'virtio1', 'snapshot-file': 'TEST_DIR/5-snapshot-v1.IMGFMT' } } ] } }
|
|
Formatting 'TEST_DIR/5-snapshot-v0.qcow2', fmt=qcow2 size=134217728 backing_file=TEST_DIR/4-snapshot-v0.qcow2 backing_fmt=qcow2 cluster_size=65536 lazy_refcounts=off refcount_bits=16
|
|
Formatting 'TEST_DIR/5-snapshot-v1.qcow2', fmt=qcow2 size=134217728 backing_file=TEST_DIR/4-snapshot-v1.qcow2 backing_fmt=qcow2 cluster_size=65536 lazy_refcounts=off refcount_bits=16
|
|
{"return": {}}
|
|
{ 'execute': 'transaction', 'arguments': {'actions': [ { 'type': 'blockdev-snapshot-sync', 'data' : { 'device': 'virtio0', 'snapshot-file': 'TEST_DIR/6-snapshot-v0.IMGFMT' } }, { 'type': 'blockdev-snapshot-sync', 'data' : { 'device': 'virtio1', 'snapshot-file': 'TEST_DIR/6-snapshot-v1.IMGFMT' } } ] } }
|
|
Formatting 'TEST_DIR/6-snapshot-v0.qcow2', fmt=qcow2 size=134217728 backing_file=TEST_DIR/5-snapshot-v0.qcow2 backing_fmt=qcow2 cluster_size=65536 lazy_refcounts=off refcount_bits=16
|
|
Formatting 'TEST_DIR/6-snapshot-v1.qcow2', fmt=qcow2 size=134217728 backing_file=TEST_DIR/5-snapshot-v1.qcow2 backing_fmt=qcow2 cluster_size=65536 lazy_refcounts=off refcount_bits=16
|
|
{"return": {}}
|
|
{ 'execute': 'transaction', 'arguments': {'actions': [ { 'type': 'blockdev-snapshot-sync', 'data' : { 'device': 'virtio0', 'snapshot-file': 'TEST_DIR/7-snapshot-v0.IMGFMT' } }, { 'type': 'blockdev-snapshot-sync', 'data' : { 'device': 'virtio1', 'snapshot-file': 'TEST_DIR/7-snapshot-v1.IMGFMT' } } ] } }
|
|
Formatting 'TEST_DIR/7-snapshot-v0.qcow2', fmt=qcow2 size=134217728 backing_file=TEST_DIR/6-snapshot-v0.qcow2 backing_fmt=qcow2 cluster_size=65536 lazy_refcounts=off refcount_bits=16
|
|
Formatting 'TEST_DIR/7-snapshot-v1.qcow2', fmt=qcow2 size=134217728 backing_file=TEST_DIR/6-snapshot-v1.qcow2 backing_fmt=qcow2 cluster_size=65536 lazy_refcounts=off refcount_bits=16
|
|
{"return": {}}
|
|
{ 'execute': 'transaction', 'arguments': {'actions': [ { 'type': 'blockdev-snapshot-sync', 'data' : { 'device': 'virtio0', 'snapshot-file': 'TEST_DIR/8-snapshot-v0.IMGFMT' } }, { 'type': 'blockdev-snapshot-sync', 'data' : { 'device': 'virtio1', 'snapshot-file': 'TEST_DIR/8-snapshot-v1.IMGFMT' } } ] } }
|
|
Formatting 'TEST_DIR/8-snapshot-v0.qcow2', fmt=qcow2 size=134217728 backing_file=TEST_DIR/7-snapshot-v0.qcow2 backing_fmt=qcow2 cluster_size=65536 lazy_refcounts=off refcount_bits=16
|
|
Formatting 'TEST_DIR/8-snapshot-v1.qcow2', fmt=qcow2 size=134217728 backing_file=TEST_DIR/7-snapshot-v1.qcow2 backing_fmt=qcow2 cluster_size=65536 lazy_refcounts=off refcount_bits=16
|
|
{"return": {}}
|
|
{ 'execute': 'transaction', 'arguments': {'actions': [ { 'type': 'blockdev-snapshot-sync', 'data' : { 'device': 'virtio0', 'snapshot-file': 'TEST_DIR/9-snapshot-v0.IMGFMT' } }, { 'type': 'blockdev-snapshot-sync', 'data' : { 'device': 'virtio1', 'snapshot-file': 'TEST_DIR/9-snapshot-v1.IMGFMT' } } ] } }
|
|
Formatting 'TEST_DIR/9-snapshot-v0.qcow2', fmt=qcow2 size=134217728 backing_file=TEST_DIR/8-snapshot-v0.qcow2 backing_fmt=qcow2 cluster_size=65536 lazy_refcounts=off refcount_bits=16
|
|
Formatting 'TEST_DIR/9-snapshot-v1.qcow2', fmt=qcow2 size=134217728 backing_file=TEST_DIR/8-snapshot-v1.qcow2 backing_fmt=qcow2 cluster_size=65536 lazy_refcounts=off refcount_bits=16
|
|
{"return": {}}
|
|
{ 'execute': 'transaction', 'arguments': {'actions': [ { 'type': 'blockdev-snapshot-sync', 'data' : { 'device': 'virtio0', 'snapshot-file': 'TEST_DIR/10-snapshot-v0.IMGFMT' } }, { 'type': 'blockdev-snapshot-sync', 'data' : { 'device': 'virtio1', 'snapshot-file': 'TEST_DIR/10-snapshot-v1.IMGFMT' } } ] } }
|
|
Formatting 'TEST_DIR/10-snapshot-v0.qcow2', fmt=qcow2 size=134217728 backing_file=TEST_DIR/9-snapshot-v0.qcow2 backing_fmt=qcow2 cluster_size=65536 lazy_refcounts=off refcount_bits=16
|
|
Formatting 'TEST_DIR/10-snapshot-v1.qcow2', fmt=qcow2 size=134217728 backing_file=TEST_DIR/9-snapshot-v1.qcow2 backing_fmt=qcow2 cluster_size=65536 lazy_refcounts=off refcount_bits=16
|
|
{"return": {}}
|
|
|
|
=== Create a couple of snapshots using blockdev-snapshot ===
|
|
|
|
Formatting 'TEST_DIR/11-snapshot-v0.IMGFMT', fmt=IMGFMT size=134217728 backing_file=TEST_DIR/10-snapshot-v0.IMGFMT
|
|
{ 'execute': 'blockdev-add', 'arguments': { 'driver': 'IMGFMT', 'node-name': 'snap_11', 'backing': null, 'file': { 'driver': 'file', 'filename': 'TEST_DIR/11-snapshot-v0.IMGFMT', 'node-name': 'file_11' } } }
|
|
{"return": {}}
|
|
{ 'execute': 'blockdev-snapshot', 'arguments': { 'node': 'virtio0', 'overlay':'snap_11' } }
|
|
{"return": {}}
|
|
Formatting 'TEST_DIR/12-snapshot-v0.IMGFMT', fmt=IMGFMT size=134217728 backing_file=TEST_DIR/11-snapshot-v0.IMGFMT
|
|
{ 'execute': 'blockdev-add', 'arguments': { 'driver': 'IMGFMT', 'node-name': 'snap_12', 'backing': null, 'file': { 'driver': 'file', 'filename': 'TEST_DIR/12-snapshot-v0.IMGFMT', 'node-name': 'file_12' } } }
|
|
{"return": {}}
|
|
{ 'execute': 'blockdev-snapshot', 'arguments': { 'node': 'virtio0', 'overlay':'snap_12' } }
|
|
{"return": {}}
|
|
|
|
=== Invalid command - cannot create a snapshot using a file BDS ===
|
|
|
|
{ 'execute': 'blockdev-snapshot', 'arguments': { 'node':'virtio0', 'overlay':'file_12' } }
|
|
{"error": {"class": "GenericError", "desc": "The overlay is already in use"}}
|
|
|
|
=== Invalid command - snapshot node used as active layer ===
|
|
|
|
{ 'execute': 'blockdev-snapshot', 'arguments': { 'node': 'virtio0', 'overlay':'snap_12' } }
|
|
{"error": {"class": "GenericError", "desc": "The overlay is already in use"}}
|
|
{ 'execute': 'blockdev-snapshot', 'arguments': { 'node':'virtio0', 'overlay':'virtio0' } }
|
|
{"error": {"class": "GenericError", "desc": "The overlay is already in use"}}
|
|
{ 'execute': 'blockdev-snapshot', 'arguments': { 'node':'virtio0', 'overlay':'virtio1' } }
|
|
{"error": {"class": "GenericError", "desc": "The overlay is already in use"}}
|
|
|
|
=== Invalid command - snapshot node used as backing hd ===
|
|
|
|
{ 'execute': 'blockdev-snapshot', 'arguments': { 'node': 'virtio0', 'overlay':'snap_11' } }
|
|
{"error": {"class": "GenericError", "desc": "The overlay is already in use"}}
|
|
|
|
=== Invalid command - snapshot node has a backing image ===
|
|
|
|
Formatting 'TEST_DIR/t.IMGFMT.base', fmt=IMGFMT size=134217728
|
|
Formatting 'TEST_DIR/t.IMGFMT', fmt=IMGFMT size=134217728 backing_file=TEST_DIR/t.IMGFMT.base
|
|
{ 'execute': 'blockdev-add', 'arguments': { 'driver': 'IMGFMT', 'node-name': 'snap_13', 'file': { 'driver': 'file', 'filename': 'TEST_DIR/t.IMGFMT', 'node-name': 'file_13' } } }
|
|
{"return": {}}
|
|
{ 'execute': 'blockdev-snapshot', 'arguments': { 'node': 'virtio0', 'overlay':'snap_13' } }
|
|
{"error": {"class": "GenericError", "desc": "The overlay already has a backing image"}}
|
|
|
|
=== Invalid command - The node does not exist ===
|
|
|
|
{ 'execute': 'blockdev-snapshot', 'arguments': { 'node': 'virtio0', 'overlay':'snap_14' } }
|
|
{"error": {"class": "GenericError", "desc": "Cannot find device=snap_14 nor node_name=snap_14"}}
|
|
{ 'execute': 'blockdev-snapshot', 'arguments': { 'node':'nodevice', 'overlay':'snap_13' } }
|
|
{"error": {"class": "GenericError", "desc": "Cannot find device=nodevice nor node_name=nodevice"}}
|
|
*** done
|