xemu/linux-user
Peter Maydell b07cd3e748 ppc patch queue 2018-07-03
Here's a last minue pull request before today's soft freeze.  Ideally
 I would have sent this earlier, but I was waiting for a couple of
 extra fixes I knew were close.  And the freeze crept up on me, like
 always.
 
 Most of the changes here are bugfixes in any case.  There are some
 cleanups as well, which have been in my staging tree for a little
 while.  There are a couple of truly new features (some extensions to
 the sam460ex platform), but these are low risk, since they only affect
 a new and not really stabilized machine type anyway.
 
 Higlights are:
   * Mac platform improvements from Mark Cave-Ayland
   * Sam460ex improvements from BALATON Zoltan et al.
   * XICS interrupt handler cleanups from Cédric Le Goater
   * TCG improvements for atomic loads and stores from Richard
     Henderson
   * Assorted other bugfixes
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCAAdFiEEdfRlhq5hpmzETofcbDjKyiDZs5IFAls7D8oACgkQbDjKyiDZ
 s5Lxmg//YzPfC/nKqTTKkyJPzh/NnSC+kRTMAT3mbxdRIc7yfgMqJtWGGbS1iKgK
 EeJ9hl5Qm0HfscfDuzf0xasU62ZEv3kNdLnWJEIgkqiXrxoO5KCnC0y4D8NN1W03
 mvINNCa8+QDg2OsirGmNUTkriiG3wLIrHTpLZ4+JuC2Bd9H3nTHZgJ0MXON/1VWY
 oRgr6kMZ5+IAzPhvYLFR6l3nPI883fgJOFyRo7YqYrkVBKFrFkfK0Xjw6vpsNxcx
 2dE/YCHhNIriLuBG5noewL7GuqZRtLnl6rjjee5VAKIe1EmFeR+jsXwNjzGOVOJg
 dhjOtsJsQQ3WdEw5uImJzE64kV228WCgmkeXzZd1010JBLr7sUkrd2EuoZ23vvat
 uvZAHVSBrJg5WvzMo1VMEoPU3VeeZQ5HL+MI80iKiU6oUgRK11gVJcebtA0sEKt+
 zhJC4JiUlHtZLTGIpMBmU8DJZ3Tyk1cBEm+Ky+SaPE+dsz16UHI0fazFQXJnXphE
 MLHEGAyQgzWYp7kIcAjUFev0Geq/Uovy4JKIGI6ISop1wRPEQDxkthfkfRyQxQkE
 zuse4EBcEH/Undw9KrmEQa0hCe+8BRkxklVbPesFPPdqH3PKNxtHYuWpSShQF0PW
 XMjw43O2Rbsl8kBUHCpy4pYSugD1hpfgaw/mVUOU1u/M1O6toTw=
 =AHrx
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'remotes/dgibson/tags/ppc-for-3.0-20180703' into staging

ppc patch queue 2018-07-03

Here's a last minue pull request before today's soft freeze.  Ideally
I would have sent this earlier, but I was waiting for a couple of
extra fixes I knew were close.  And the freeze crept up on me, like
always.

Most of the changes here are bugfixes in any case.  There are some
cleanups as well, which have been in my staging tree for a little
while.  There are a couple of truly new features (some extensions to
the sam460ex platform), but these are low risk, since they only affect
a new and not really stabilized machine type anyway.

Higlights are:
  * Mac platform improvements from Mark Cave-Ayland
  * Sam460ex improvements from BALATON Zoltan et al.
  * XICS interrupt handler cleanups from Cédric Le Goater
  * TCG improvements for atomic loads and stores from Richard
    Henderson
  * Assorted other bugfixes

# gpg: Signature made Tue 03 Jul 2018 06:55:22 BST
# gpg:                using RSA key 6C38CACA20D9B392
# gpg: Good signature from "David Gibson <david@gibson.dropbear.id.au>"
# gpg:                 aka "David Gibson (Red Hat) <dgibson@redhat.com>"
# gpg:                 aka "David Gibson (ozlabs.org) <dgibson@ozlabs.org>"
# gpg:                 aka "David Gibson (kernel.org) <dwg@kernel.org>"
# Primary key fingerprint: 75F4 6586 AE61 A66C C44E  87DC 6C38 CACA 20D9 B392

* remotes/dgibson/tags/ppc-for-3.0-20180703: (35 commits)
  ppc: Include vga cirrus card into the compiling process
  target/ppc: Relax reserved bitmask of indexed store instructions
  target/ppc: set is_jmp on ppc_tr_breakpoint_check
  spapr: compute default value of "hpt-max-page-size" later
  target/ppc/kvm: don't pass cpu to kvm_get_smmu_info()
  target/ppc/kvm: get rid of kvm_get_fallback_smmu_info()
  ppc440_uc: Basic emulation of PPC440 DMA controller
  sam460ex: Add RTC device
  hw/timer: Add basic M41T80 emulation
  ppc4xx_i2c: Rewrite to model hardware more closely
  hw/ppc: Give sam46ex its own config option
  fpu_helper.c: fix setting FPSCR[FI] bit
  target/ppc: Implement the rest of gen_st_atomic
  target/ppc: Implement the rest of gen_ld_atomic
  target/ppc: Use atomic min/max helpers
  target/ppc: Use MO_ALIGN for EXIWX and ECOWX
  target/ppc: Split out gen_st_atomic
  target/ppc: Split out gen_ld_atomic
  target/ppc: Split out gen_load_locked
  target/ppc: Tidy gen_conditional_store
  ...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

# Conflicts:
#	hw/ppc/spapr.c
2018-07-03 14:59:27 +01:00
..
aarch64 linux-user: move generic signal definitions to generic/signal.h 2018-06-04 01:30:44 +02:00
alpha linux-user/alpha: Fix epoll syscalls 2018-06-11 14:44:22 +02:00
arm linux-user: move generic signal definitions to generic/signal.h 2018-06-04 01:30:44 +02:00
cris linux-user: move generic signal definitions to generic/signal.h 2018-06-04 01:30:44 +02:00
generic linux-user: move generic signal definitions to generic/signal.h 2018-06-04 01:30:44 +02:00
host linux-user: Fix register used for 6th and 7th syscall argument on aarch64 2018-02-18 18:52:32 +01:00
hppa linux-user/hppa: Fix typo in mknodat syscall 2018-06-11 14:45:44 +02:00
i386 linux-user: move generic signal definitions to generic/signal.h 2018-06-04 01:30:44 +02:00
m68k linux-user: move generic signal definitions to generic/signal.h 2018-06-04 01:30:44 +02:00
microblaze linux-user/microblaze: Fix typo in accept4 syscall 2018-06-11 14:47:08 +02:00
mips linux-user: move mips signal definitions to mips/target_signal.h 2018-06-04 01:30:44 +02:00
mips64 linux-user: move mips signal definitions to mips/target_signal.h 2018-06-04 01:30:44 +02:00
nios2 linux-user: move generic signal definitions to generic/signal.h 2018-06-04 01:30:44 +02:00
openrisc linux-user: move openrisc signal definitions to openrisc/target_signal.h 2018-06-04 01:30:44 +02:00
ppc target/ppc: Remove POWERPC_EXCP_STCX 2018-07-03 09:56:52 +10:00
riscv linux-user: move generic signal definitions to generic/signal.h 2018-06-04 01:30:44 +02:00
s390x linux-user: move generic signal definitions to generic/signal.h 2018-06-04 01:30:44 +02:00
sh4 linux-user: move generic signal definitions to generic/signal.h 2018-06-04 01:30:44 +02:00
sparc linux-user: move sparc signal definitions to sparc/target_signal.h 2018-06-04 01:30:44 +02:00
sparc64 linux-user/sparc64: Add inotify_rm_watch and tee syscalls 2018-06-11 14:47:45 +02:00
tilegx linux-user: move generic signal definitions to generic/signal.h 2018-06-04 01:30:44 +02:00
x86_64 linux-user: move generic signal definitions to generic/signal.h 2018-06-04 01:30:44 +02:00
xtensa linux-user: move generic signal definitions to generic/signal.h 2018-06-04 01:30:44 +02:00
cpu_loop-common.h linux-user: create a dummy per arch cpu_loop.c 2018-04-30 09:47:55 +02:00
elfload.c target/arm: Implement ARMv8.2-DotProd 2018-06-29 15:11:15 +01:00
errno_defs.h linux-user: Handle ERFKILL and EHWPOISON 2017-01-22 18:14:10 -08:00
flat.h Support for 32 bit ABI on 64 bit targets (only enabled Sparc64) 2007-10-14 16:27:31 +00:00
flatload.c linux-user: Use is_error() to avoid warnings and make the code clearer 2018-06-11 14:40:11 +02:00
ioctls.h linux-user: Implement ioctl cmd TIOCGPTPEER 2018-02-18 18:52:32 +01:00
linux_loop.h linux-user: Add loop control ioctls 2016-07-19 15:22:33 +03:00
linuxload.c linux-user: Clean up includes 2016-01-29 15:07:22 +00:00
m68k-sim.c linux-user: Clean up includes 2016-01-29 15:07:22 +00:00
main.c linux-user: Use the IEC binary prefix definitions 2018-07-02 15:41:18 +02:00
Makefile.objs linux-user: create a dummy per arch cpu_loop.c 2018-04-30 09:47:55 +02:00
mmap.c move public invalidate APIs out of translate-all.{c,h}, clean up 2018-06-28 19:05:30 +02:00
qemu.h linux-user: Export use is_error(), use it to avoid warnings 2018-06-11 14:40:11 +02:00
safe-syscall.S linux-user: Provide safe_syscall for fixing races between signals and syscalls 2016-05-27 14:49:51 +03:00
signal-common.h linux-user: introduce target_sigsp() and target_save_altstack() 2018-05-03 18:29:15 +02:00
signal.c linux-user: move get_sp_from_cpustate() to target_cpu.h 2018-06-04 01:30:44 +02:00
socket.h linux-user: update ARCH_HAS_SOCKET_TYPES use 2018-05-25 10:10:55 +02:00
strace.c linux-user: fix O_TMPFILE handling 2017-10-16 16:00:56 +03:00
strace.list linux-user/alpha: Fix epoll syscalls 2018-06-11 14:44:22 +02:00
syscall_defs.h linux-user: remove useless #if 2018-06-04 01:30:44 +02:00
syscall_types.h linux-user: Add FICLONE and FICLONERANGE ioctls 2017-02-16 15:29:30 +01:00
syscall.c linux-user: Export use is_error(), use it to avoid warnings 2018-06-11 14:40:11 +02:00
target_flat.h linux-user/FLAT: allow targets to override FLAT processing 2011-02-09 10:33:54 +02:00
trace-events trace-events: fix code style: print 0x before hex numbers 2017-08-01 12:13:07 +01:00
uaccess.c util: move declarations out of qemu-common.h 2016-03-22 22:20:17 +01:00
uname.c linux-user: Clean up includes 2016-01-29 15:07:22 +00:00
uname.h Clean up decorations and whitespace around header guards 2016-07-12 16:20:46 +02:00
vm86.c linux-user: Clean up includes 2016-01-29 15:07:22 +00:00