xemu-project/xemu
1
0
Fork 0
mirror of https://github.com/xemu-project/xemu.git synced 2024-12-03 00:57:25 +00:00
Code Issues Actions Packages Projects Releases Wiki Activity
938912a866
xemu/hw/display/ati.c
BALATON Zoltan 862b4a291d hw/display: Add basic ATI VGA emulation 
At least two machines, the PPC mac99 and MIPS fulong2e, have an ATI
gfx chip by default (Rage 128 Pro and M6/RV100 respectively) and
guests running on these and the PMON2000 firmware of the fulong2e
expect this to be available. Fortunately these are very similar chips
so they can be mostly emulated in the same device model. This patch
adds basic emulation of these ATI VGA chips.

While this is incomplete and currently only enough to run the MIPS
firmware and get framebuffer output with Linux, it allows the fulong2e
board to work more like the real hardware and having it in QEMU in
this state provides a way to experiment with it and allows others to
contribute to improve it. It is compiled for all archs but only the
fulong2e (which currently has no display output at all) is set to use
it by default (in a separate patch).

Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Acked-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Tested-by: Andrew Randrianasulu <randrianasulu@gmail.com>
Tested-by: Howard Spoelstra <hsp.cat7@gmail.com>
Message-id: 0b1b7c22873a6e37627261b04fb687412b25ff4f.1552152100.git.balaton@eik.bme.hu
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2019-03-11 08:04:55 +01:00

866 lines
28 KiB
C
Raw Blame History

/*
* QEMU ATI SVGA emulation
*
* Copyright (c) 2019 BALATON Zoltan
*
* This work is licensed under the GNU GPL license version 2 or later.
*/
/*
* WARNING:
* This is very incomplete and only enough for Linux console and some
* unaccelerated X output at the moment.
* Currently it's little more than a frame buffer with minimal functions,
* other more advanced features of the hardware are yet to be implemented.
* We only aim for Rage 128 Pro (and some RV100) and 2D only at first,
* No 3D at all yet (maybe after 2D works, but feel free to improve it)
*/
#include "ati_int.h"
#include "ati_regs.h"
#include "vga_regs.h"
#include "qemu/log.h"
#include "qemu/error-report.h"
#include "qapi/error.h"
#include "hw/hw.h"
#include "ui/console.h"
#include "trace.h"
#define ATI_DEBUG_HW_CURSOR 0
static const struct {
const char *name;
uint16_t dev_id;
} ati_model_aliases[] = {
{ "rage128p", PCI_DEVICE_ID_ATI_RAGE128_PF },
{ "rv100", PCI_DEVICE_ID_ATI_RADEON_QY },
};
enum { VGA_MODE, EXT_MODE };
static void ati_vga_switch_mode(ATIVGAState *s)
{
DPRINTF("%d -> %d\n",
s->mode, !!(s->regs.crtc_gen_cntl & CRTC2_EXT_DISP_EN));
if (s->regs.crtc_gen_cntl & CRTC2_EXT_DISP_EN) {
/* Extended mode enabled */
s->mode = EXT_MODE;
if (s->regs.crtc_gen_cntl & CRTC2_EN) {
/* CRT controller enabled, use CRTC values */
uint32_t offs = s->regs.crtc_offset & 0x07ffffff;
int stride = (s->regs.crtc_pitch & 0x7ff) * 8;
int bpp = 0;
int h, v;
if (s->regs.crtc_h_total_disp == 0) {
s->regs.crtc_h_total_disp = ((640 / 8) - 1) << 16;
}
if (s->regs.crtc_v_total_disp == 0) {
s->regs.crtc_v_total_disp = (480 - 1) << 16;
}
h = ((s->regs.crtc_h_total_disp >> 16) + 1) * 8;
v = (s->regs.crtc_v_total_disp >> 16) + 1;
switch (s->regs.crtc_gen_cntl & CRTC_PIX_WIDTH_MASK) {
case CRTC_PIX_WIDTH_4BPP:
bpp = 4;
break;
case CRTC_PIX_WIDTH_8BPP:
bpp = 8;
break;
case CRTC_PIX_WIDTH_15BPP:
bpp = 15;
break;
case CRTC_PIX_WIDTH_16BPP:
bpp = 16;
break;
case CRTC_PIX_WIDTH_24BPP:
bpp = 24;
break;
case CRTC_PIX_WIDTH_32BPP:
bpp = 32;
break;
default:
qemu_log_mask(LOG_UNIMP, "Unsupported bpp value\n");
}
assert(bpp != 0);
DPRINTF("Switching to %dx%d %d %d @ %x\n", h, v, stride, bpp, offs);
vbe_ioport_write_index(&s->vga, 0, VBE_DISPI_INDEX_ENABLE);
vbe_ioport_write_data(&s->vga, 0, VBE_DISPI_DISABLED);
/* reset VBE regs then set up mode */
s->vga.vbe_regs[VBE_DISPI_INDEX_XRES] = h;
s->vga.vbe_regs[VBE_DISPI_INDEX_YRES] = v;
s->vga.vbe_regs[VBE_DISPI_INDEX_BPP] = bpp;
/* enable mode via ioport so it updates vga regs */
vbe_ioport_write_index(&s->vga, 0, VBE_DISPI_INDEX_ENABLE);
vbe_ioport_write_data(&s->vga, 0, VBE_DISPI_ENABLED |
VBE_DISPI_LFB_ENABLED | VBE_DISPI_NOCLEARMEM |
(s->regs.dac_cntl & DAC_8BIT_EN ? VBE_DISPI_8BIT_DAC : 0));
/* now set offset and stride after enable as that resets these */
if (stride) {
vbe_ioport_write_index(&s->vga, 0, VBE_DISPI_INDEX_VIRT_WIDTH);
vbe_ioport_write_data(&s->vga, 0, stride);
if (offs % stride == 0) {
vbe_ioport_write_index(&s->vga, 0, VBE_DISPI_INDEX_Y_OFFSET);
vbe_ioport_write_data(&s->vga, 0, offs / stride);
} else {
/* FIXME what to do with this? */
error_report("VGA offset is not multiple of pitch, "
"expect bad picture");
}
}
}
} else {
/* VGA mode enabled */
s->mode = VGA_MODE;
vbe_ioport_write_index(&s->vga, 0, VBE_DISPI_INDEX_ENABLE);
vbe_ioport_write_data(&s->vga, 0, VBE_DISPI_DISABLED);
}
}
/* Used by host side hardware cursor */
static void ati_cursor_define(ATIVGAState *s)
{
uint8_t data[1024];
uint8_t *src;
int i, j, idx = 0;
if ((s->regs.cur_offset & BIT(31)) || s->cursor_guest_mode) {
return; /* Do not update cursor if locked or rendered by guest */
}
/* FIXME handle cur_hv_offs correctly */
src = s->vga.vram_ptr + (s->regs.crtc_offset & 0x07ffffff) +
s->regs.cur_offset - (s->regs.cur_hv_offs >> 16) -
(s->regs.cur_hv_offs & 0xffff) * 16;
for (i = 0; i < 64; i++) {
for (j = 0; j < 8; j++, idx++) {
data[idx] = src[i * 16 + j];
data[512 + idx] = src[i * 16 + j + 8];
}
}
if (!s->cursor) {
s->cursor = cursor_alloc(64, 64);
}
cursor_set_mono(s->cursor, s->regs.cur_color1, s->regs.cur_color0,
&data[512], 1, &data[0]);
dpy_cursor_define(s->vga.con, s->cursor);
}
/* Alternatively support guest rendered hardware cursor */
static void ati_cursor_invalidate(VGACommonState *vga)
{
ATIVGAState *s = container_of(vga, ATIVGAState, vga);
int size = (s->regs.crtc_gen_cntl & CRTC2_CUR_EN) ? 64 : 0;
if (s->regs.cur_offset & BIT(31)) {
return; /* Do not update cursor if locked */
}
if (s->cursor_size != size ||
vga->hw_cursor_x != s->regs.cur_hv_pos >> 16 ||
vga->hw_cursor_y != (s->regs.cur_hv_pos & 0xffff) ||
s->cursor_offset != s->regs.cur_offset - (s->regs.cur_hv_offs >> 16) -
(s->regs.cur_hv_offs & 0xffff) * 16) {
/* Remove old cursor then update and show new one if needed */
vga_invalidate_scanlines(vga, vga->hw_cursor_y, vga->hw_cursor_y + 63);
vga->hw_cursor_x = s->regs.cur_hv_pos >> 16;
vga->hw_cursor_y = s->regs.cur_hv_pos & 0xffff;
s->cursor_offset = s->regs.cur_offset - (s->regs.cur_hv_offs >> 16) -
(s->regs.cur_hv_offs & 0xffff) * 16;
s->cursor_size = size;
if (size) {
vga_invalidate_scanlines(vga,
vga->hw_cursor_y, vga->hw_cursor_y + 63);
}
}
}
static void ati_cursor_draw_line(VGACommonState *vga, uint8_t *d, int scr_y)
{
ATIVGAState *s = container_of(vga, ATIVGAState, vga);
uint8_t *src;
uint32_t *dp = (uint32_t *)d;
int i, j, h;
if (!(s->regs.crtc_gen_cntl & CRTC2_CUR_EN) ||
scr_y < vga->hw_cursor_y || scr_y >= vga->hw_cursor_y + 64 ||
scr_y > s->regs.crtc_v_total_disp >> 16) {
return;
}
/* FIXME handle cur_hv_offs correctly */
src = s->vga.vram_ptr + (s->regs.crtc_offset & 0x07ffffff) +
s->cursor_offset + (scr_y - vga->hw_cursor_y) * 16;
dp = &dp[vga->hw_cursor_x];
h = ((s->regs.crtc_h_total_disp >> 16) + 1) * 8;
for (i = 0; i < 8; i++) {
uint32_t color;
uint8_t abits = src[i];
uint8_t xbits = src[i + 8];
for (j = 0; j < 8; j++, abits <<= 1, xbits <<= 1) {
if (abits & BIT(7)) {
if (xbits & BIT(7)) {
color = dp[i * 8 + j] ^ 0xffffffff; /* complement */
} else {
continue; /* transparent, no change */
}
} else {
color = (xbits & BIT(7) ? s->regs.cur_color1 :
s->regs.cur_color0) << 8 | 0xff;
}
if (vga->hw_cursor_x + i * 8 + j >= h) {
return; /* end of screen, don't span to next line */
}
dp[i * 8 + j] = color;
}
}
}
static inline uint64_t ati_reg_read_offs(uint32_t reg, int offs,
unsigned int size)
{
if (offs == 0 && size == 4) {
return reg;
} else {
return extract32(reg, offs * BITS_PER_BYTE, size * BITS_PER_BYTE);
}
}
static uint64_t ati_mm_read(void *opaque, hwaddr addr, unsigned int size)
{
ATIVGAState *s = opaque;
uint64_t val = 0;
switch (addr) {
case MM_INDEX:
val = s->regs.mm_index;
break;
case MM_DATA ... MM_DATA + 3:
/* indexed access to regs or memory */
if (s->regs.mm_index & BIT(31)) {
if (s->regs.mm_index <= s->vga.vram_size - size) {
int i = size - 1;
while (i >= 0) {
val <<= 8;
val |= s->vga.vram_ptr[s->regs.mm_index + i--];
}
}
} else {
val = ati_mm_read(s, s->regs.mm_index + addr - MM_DATA, size);
}
break;
case BIOS_0_SCRATCH ... BUS_CNTL - 1:
{
int i = (addr - BIOS_0_SCRATCH) / 4;
if (s->dev_id == PCI_DEVICE_ID_ATI_RAGE128_PF && i > 3) {
break;
}
val = ati_reg_read_offs(s->regs.bios_scratch[i],
addr - (BIOS_0_SCRATCH + i * 4), size);
break;
}
case CRTC_GEN_CNTL ... CRTC_GEN_CNTL + 3:
val = ati_reg_read_offs(s->regs.crtc_gen_cntl,
addr - CRTC_GEN_CNTL, size);
break;
case CRTC_EXT_CNTL ... CRTC_EXT_CNTL + 3:
val = ati_reg_read_offs(s->regs.crtc_ext_cntl,
addr - CRTC_EXT_CNTL, size);
break;
case DAC_CNTL:
val = s->regs.dac_cntl;
break;
/* case GPIO_MONID: FIXME hook up DDC I2C here */
case PALETTE_INDEX:
/* FIXME unaligned access */
val = vga_ioport_read(&s->vga, VGA_PEL_IR) << 16;
val |= vga_ioport_read(&s->vga, VGA_PEL_IW) & 0xff;
break;
case PALETTE_DATA:
val = vga_ioport_read(&s->vga, VGA_PEL_D);
break;
case CNFG_MEMSIZE:
val = s->vga.vram_size;
break;
case MC_STATUS:
val = 5;
break;
case RBBM_STATUS:
case GUI_STAT:
val = 64; /* free CMDFIFO entries */
break;
case CRTC_H_TOTAL_DISP:
val = s->regs.crtc_h_total_disp;
break;
case CRTC_H_SYNC_STRT_WID:
val = s->regs.crtc_h_sync_strt_wid;
break;
case CRTC_V_TOTAL_DISP:
val = s->regs.crtc_v_total_disp;
break;
case CRTC_V_SYNC_STRT_WID:
val = s->regs.crtc_v_sync_strt_wid;
break;
case CRTC_OFFSET:
val = s->regs.crtc_offset;
break;
case CRTC_OFFSET_CNTL:
val = s->regs.crtc_offset_cntl;
break;
case CRTC_PITCH:
val = s->regs.crtc_pitch;
break;
case 0xf00 ... 0xfff:
val = pci_default_read_config(&s->dev, addr - 0xf00, size);
break;
case CUR_OFFSET:
val = s->regs.cur_offset;
break;
case CUR_HORZ_VERT_POSN:
val = s->regs.cur_hv_pos;
val |= s->regs.cur_offset & BIT(31);
break;
case CUR_HORZ_VERT_OFF:
val = s->regs.cur_hv_offs;
val |= s->regs.cur_offset & BIT(31);
break;
case CUR_CLR0:
val = s->regs.cur_color0;
break;
case CUR_CLR1:
val = s->regs.cur_color1;
break;
case DST_OFFSET:
val = s->regs.dst_offset;
break;
case DST_PITCH:
val = s->regs.dst_pitch;
if (s->dev_id == PCI_DEVICE_ID_ATI_RAGE128_PF) {
val &= s->regs.dst_tile << 16;
}
break;
case DST_WIDTH:
val = s->regs.dst_width;
break;
case DST_HEIGHT:
val = s->regs.dst_height;
break;
case SRC_X:
val = s->regs.src_x;
break;
case SRC_Y:
val = s->regs.src_y;
break;
case DST_X:
val = s->regs.dst_x;
break;
case DST_Y:
val = s->regs.dst_y;
break;
case DP_GUI_MASTER_CNTL:
val = s->regs.dp_gui_master_cntl;
break;
case SRC_OFFSET:
val = s->regs.src_offset;
break;
case SRC_PITCH:
val = s->regs.src_pitch;
if (s->dev_id == PCI_DEVICE_ID_ATI_RAGE128_PF) {
val &= s->regs.src_tile << 16;
}
break;
case DP_BRUSH_BKGD_CLR:
val = s->regs.dp_brush_bkgd_clr;
break;
case DP_BRUSH_FRGD_CLR:
val = s->regs.dp_brush_frgd_clr;
break;
case DP_SRC_FRGD_CLR:
val = s->regs.dp_src_frgd_clr;
break;
case DP_SRC_BKGD_CLR:
val = s->regs.dp_src_bkgd_clr;
break;
case DP_CNTL:
val = s->regs.dp_cntl;
break;
case DP_DATATYPE:
val = s->regs.dp_datatype;
break;
case DP_MIX:
val = s->regs.dp_mix;
break;
case DP_WRITE_MASK:
val = s->regs.dp_write_mask;
break;
case DEFAULT_OFFSET:
val = s->regs.default_offset;
break;
case DEFAULT_PITCH:
val = s->regs.default_pitch;
break;
case DEFAULT_SC_BOTTOM_RIGHT:
val = s->regs.default_sc_bottom_right;
break;
default:
break;
}
if (addr < CUR_OFFSET || addr > CUR_CLR1 || ATI_DEBUG_HW_CURSOR) {
trace_ati_mm_read(size, addr, ati_reg_name(addr & ~3ULL), val);
}
return val;
}
static inline void ati_reg_write_offs(uint32_t *reg, int offs,
uint64_t data, unsigned int size)
{
if (offs == 0 && size == 4) {
*reg = data;
} else {
*reg = deposit32(*reg, offs * BITS_PER_BYTE, size * BITS_PER_BYTE,
data);
}
}
static void ati_mm_write(void *opaque, hwaddr addr,
uint64_t data, unsigned int size)
{
ATIVGAState *s = opaque;
if (addr < CUR_OFFSET || addr > CUR_CLR1 || ATI_DEBUG_HW_CURSOR) {
trace_ati_mm_write(size, addr, ati_reg_name(addr & ~3ULL), data);
}
switch (addr) {
case MM_INDEX:
s->regs.mm_index = data;
break;
case MM_DATA ... MM_DATA + 3:
/* indexed access to regs or memory */
if (s->regs.mm_index & BIT(31)) {
if (s->regs.mm_index <= s->vga.vram_size - size) {
int i = 0;
while (i < size) {
s->vga.vram_ptr[s->regs.mm_index + i] = data & 0xff;
data >>= 8;
}
}
} else {
ati_mm_write(s, s->regs.mm_index + addr - MM_DATA, data, size);
}
break;
case BIOS_0_SCRATCH ... BUS_CNTL - 1:
{
int i = (addr - BIOS_0_SCRATCH) / 4;
if (s->dev_id == PCI_DEVICE_ID_ATI_RAGE128_PF && i > 3) {
break;
}
ati_reg_write_offs(&s->regs.bios_scratch[i],
addr - (BIOS_0_SCRATCH + i * 4), data, size);
break;
}
case CRTC_GEN_CNTL ... CRTC_GEN_CNTL + 3:
{
uint32_t val = s->regs.crtc_gen_cntl;
ati_reg_write_offs(&s->regs.crtc_gen_cntl,
addr - CRTC_GEN_CNTL, data, size);
if ((val & CRTC2_CUR_EN) != (s->regs.crtc_gen_cntl & CRTC2_CUR_EN)) {
if (s->cursor_guest_mode) {
s->vga.force_shadow = !!(s->regs.crtc_gen_cntl & CRTC2_CUR_EN);
} else {
if (s->regs.crtc_gen_cntl & CRTC2_CUR_EN) {
ati_cursor_define(s);
}
dpy_mouse_set(s->vga.con, s->regs.cur_hv_pos >> 16,
s->regs.cur_hv_pos & 0xffff,
(s->regs.crtc_gen_cntl & CRTC2_CUR_EN) != 0);
}
}
if ((val & (CRTC2_EXT_DISP_EN | CRTC2_EN)) !=
(s->regs.crtc_gen_cntl & (CRTC2_EXT_DISP_EN | CRTC2_EN))) {
ati_vga_switch_mode(s);
}
break;
}
case CRTC_EXT_CNTL ... CRTC_EXT_CNTL + 3:
{
uint32_t val = s->regs.crtc_ext_cntl;
ati_reg_write_offs(&s->regs.crtc_ext_cntl,
addr - CRTC_EXT_CNTL, data, size);
if (s->regs.crtc_ext_cntl & CRT_CRTC_DISPLAY_DIS) {
DPRINTF("Display disabled\n");
s->vga.ar_index &= ~BIT(5);
} else {
DPRINTF("Display enabled\n");
s->vga.ar_index |= BIT(5);
ati_vga_switch_mode(s);
}
if ((val & CRT_CRTC_DISPLAY_DIS) !=
(s->regs.crtc_ext_cntl & CRT_CRTC_DISPLAY_DIS)) {
ati_vga_switch_mode(s);
}
break;
}
case DAC_CNTL:
s->regs.dac_cntl = data & 0xffffe3ff;
s->vga.dac_8bit = !!(data & DAC_8BIT_EN);
break;
/* case GPIO_MONID: FIXME hook up DDC I2C here */
case PALETTE_INDEX ... PALETTE_INDEX + 3:
if (size == 4) {
vga_ioport_write(&s->vga, VGA_PEL_IR, (data >> 16) & 0xff);
vga_ioport_write(&s->vga, VGA_PEL_IW, data & 0xff);
} else {
if (addr == PALETTE_INDEX) {
vga_ioport_write(&s->vga, VGA_PEL_IW, data & 0xff);
} else {
vga_ioport_write(&s->vga, VGA_PEL_IR, data & 0xff);
}
}
break;
case PALETTE_DATA ... PALETTE_DATA + 3:
data <<= addr - PALETTE_DATA;
data = bswap32(data) >> 8;
vga_ioport_write(&s->vga, VGA_PEL_D, data & 0xff);
data >>= 8;
vga_ioport_write(&s->vga, VGA_PEL_D, data & 0xff);
data >>= 8;
vga_ioport_write(&s->vga, VGA_PEL_D, data & 0xff);
break;
case CRTC_H_TOTAL_DISP:
s->regs.crtc_h_total_disp = data & 0x07ff07ff;
break;
case CRTC_H_SYNC_STRT_WID:
s->regs.crtc_h_sync_strt_wid = data & 0x17bf1fff;
break;
case CRTC_V_TOTAL_DISP:
s->regs.crtc_v_total_disp = data & 0x0fff0fff;
break;
case CRTC_V_SYNC_STRT_WID:
s->regs.crtc_v_sync_strt_wid = data & 0x9f0fff;
break;
case CRTC_OFFSET:
s->regs.crtc_offset = data & 0xc7ffffff;
break;
case CRTC_OFFSET_CNTL:
s->regs.crtc_offset_cntl = data; /* FIXME */
break;
case CRTC_PITCH:
s->regs.crtc_pitch = data & 0x07ff07ff;
break;
case 0xf00 ... 0xfff:
/* read-only copy of PCI config space so ignore writes */
break;
case CUR_OFFSET:
if (s->regs.cur_offset != (data & 0x87fffff0)) {
s->regs.cur_offset = data & 0x87fffff0;
ati_cursor_define(s);
}
break;
case CUR_HORZ_VERT_POSN:
s->regs.cur_hv_pos = data & 0x3fff0fff;
if (data & BIT(31)) {
s->regs.cur_offset |= data & BIT(31);
} else if (s->regs.cur_offset & BIT(31)) {
s->regs.cur_offset &= ~BIT(31);
ati_cursor_define(s);
}
if (!s->cursor_guest_mode &&
(s->regs.crtc_gen_cntl & CRTC2_CUR_EN) && !(data & BIT(31))) {
dpy_mouse_set(s->vga.con, s->regs.cur_hv_pos >> 16,
s->regs.cur_hv_pos & 0xffff, 1);
}
break;
case CUR_HORZ_VERT_OFF:
s->regs.cur_hv_offs = data & 0x3f003f;
if (data & BIT(31)) {
s->regs.cur_offset |= data & BIT(31);
} else if (s->regs.cur_offset & BIT(31)) {
s->regs.cur_offset &= ~BIT(31);
ati_cursor_define(s);
}
break;
case CUR_CLR0:
if (s->regs.cur_color0 != (data & 0xffffff)) {
s->regs.cur_color0 = data & 0xffffff;
ati_cursor_define(s);
}
break;
case CUR_CLR1:
/*
* Update cursor unconditionally here because some clients set up
* other registers before actually writing cursor data to memory at
* offset so we would miss cursor change unless always updating here
*/
s->regs.cur_color1 = data & 0xffffff;
ati_cursor_define(s);
break;
case DST_OFFSET:
if (s->dev_id == PCI_DEVICE_ID_ATI_RAGE128_PF) {
s->regs.dst_offset = data & 0xfffffff0;
} else {
s->regs.dst_offset = data & 0xfffffc00;
}
break;
case DST_PITCH:
if (s->dev_id == PCI_DEVICE_ID_ATI_RAGE128_PF) {
s->regs.dst_pitch = data & 0x3fff;
s->regs.dst_tile = (data >> 16) & 1;
} else {
s->regs.dst_pitch = data & 0x3ff0;
}
break;
case DST_TILE:
if (s->dev_id == PCI_DEVICE_ID_ATI_RADEON_QY) {
s->regs.dst_tile = data & 3;
}
break;
case DST_WIDTH:
s->regs.dst_width = data & 0x3fff;
ati_2d_blt(s);
break;
case DST_HEIGHT:
s->regs.dst_height = data & 0x3fff;
break;
case SRC_X:
s->regs.src_x = data & 0x3fff;
break;
case SRC_Y:
s->regs.src_y = data & 0x3fff;
break;
case DST_X:
s->regs.dst_x = data & 0x3fff;
break;
case DST_Y:
s->regs.dst_y = data & 0x3fff;
break;
case SRC_PITCH_OFFSET:
if (s->dev_id == PCI_DEVICE_ID_ATI_RAGE128_PF) {
s->regs.src_offset = (data & 0x1fffff) << 5;
s->regs.src_pitch = (data >> 21) & 0x3ff;
s->regs.src_tile = data >> 31;
} else {
s->regs.src_offset = (data & 0x3fffff) << 11;
s->regs.src_pitch = (data & 0x3fc00000) >> 16;
s->regs.src_tile = (data >> 30) & 1;
}
break;
case DST_PITCH_OFFSET:
if (s->dev_id == PCI_DEVICE_ID_ATI_RAGE128_PF) {
s->regs.dst_offset = (data & 0x1fffff) << 5;
s->regs.dst_pitch = (data >> 21) & 0x3ff;
s->regs.dst_tile = data >> 31;
} else {
s->regs.dst_offset = (data & 0x3fffff) << 11;
s->regs.dst_pitch = (data & 0x3fc00000) >> 16;
s->regs.dst_tile = data >> 30;
}
break;
case SRC_Y_X:
s->regs.src_x = data & 0x3fff;
s->regs.src_y = (data >> 16) & 0x3fff;
break;
case DST_Y_X:
s->regs.dst_x = data & 0x3fff;
s->regs.dst_y = (data >> 16) & 0x3fff;
break;
case DST_HEIGHT_WIDTH:
s->regs.dst_width = data & 0x3fff;
s->regs.dst_height = (data >> 16) & 0x3fff;
ati_2d_blt(s);
break;
case DP_GUI_MASTER_CNTL:
s->regs.dp_gui_master_cntl = data & 0xf800000f;
s->regs.dp_datatype = (data & 0x0f00) >> 8 | (data & 0x30f0) << 4 |
(data & 0x4000) << 16;
s->regs.dp_mix = (data & GMC_ROP3_MASK) | (data & 0x7000000) >> 16;
break;
case DST_WIDTH_X:
s->regs.dst_x = data & 0x3fff;
s->regs.dst_width = (data >> 16) & 0x3fff;
ati_2d_blt(s);
break;
case SRC_X_Y:
s->regs.src_y = data & 0x3fff;
s->regs.src_x = (data >> 16) & 0x3fff;
break;
case DST_X_Y:
s->regs.dst_y = data & 0x3fff;
s->regs.dst_x = (data >> 16) & 0x3fff;
break;
case DST_WIDTH_HEIGHT:
s->regs.dst_height = data & 0x3fff;
s->regs.dst_width = (data >> 16) & 0x3fff;
ati_2d_blt(s);
break;
case DST_HEIGHT_Y:
s->regs.dst_y = data & 0x3fff;
s->regs.dst_height = (data >> 16) & 0x3fff;
break;
case SRC_OFFSET:
if (s->dev_id == PCI_DEVICE_ID_ATI_RAGE128_PF) {
s->regs.src_offset = data & 0xfffffff0;
} else {
s->regs.src_offset = data & 0xfffffc00;
}
break;
case SRC_PITCH:
if (s->dev_id == PCI_DEVICE_ID_ATI_RAGE128_PF) {
s->regs.src_pitch = data & 0x3fff;
s->regs.src_tile = (data >> 16) & 1;
} else {
s->regs.src_pitch = data & 0x3ff0;
}
break;
case DP_BRUSH_BKGD_CLR:
s->regs.dp_brush_bkgd_clr = data;
break;
case DP_BRUSH_FRGD_CLR:
s->regs.dp_brush_frgd_clr = data;
break;
case DP_CNTL:
s->regs.dp_cntl = data;
break;
case DP_DATATYPE:
s->regs.dp_datatype = data & 0xe0070f0f;
break;
case DP_MIX:
s->regs.dp_mix = data & 0x00ff0700;
break;
case DP_WRITE_MASK:
s->regs.dp_write_mask = data;
break;
case DEFAULT_OFFSET:
data &= (s->dev_id == PCI_DEVICE_ID_ATI_RAGE128_PF ?
0x03fffc00 : 0xfffffc00);
s->regs.default_offset = data;
break;
case DEFAULT_PITCH:
if (s->dev_id == PCI_DEVICE_ID_ATI_RAGE128_PF) {
s->regs.default_pitch = data & 0x103ff;
}
break;
case DEFAULT_SC_BOTTOM_RIGHT:
s->regs.default_sc_bottom_right = data & 0x3fff3fff;
break;
default:
break;
}
}
static const MemoryRegionOps ati_mm_ops = {
.read = ati_mm_read,
.write = ati_mm_write,
.endianness = DEVICE_LITTLE_ENDIAN,
};
static void ati_vga_realize(PCIDevice *dev, Error **errp)
{
ATIVGAState *s = ATI_VGA(dev);
VGACommonState *vga = &s->vga;
if (s->model) {
int i;
for (i = 0; i < ARRAY_SIZE(ati_model_aliases); i++) {
if (!strcmp(s->model, ati_model_aliases[i].name)) {
s->dev_id = ati_model_aliases[i].dev_id;
break;
}
}
if (i >= ARRAY_SIZE(ati_model_aliases)) {
warn_report("Unknown ATI VGA model name, "
"using default rage128p");
}
}
if (s->dev_id != PCI_DEVICE_ID_ATI_RAGE128_PF &&
s->dev_id != PCI_DEVICE_ID_ATI_RADEON_QY) {
error_setg(errp, "Unknown ATI VGA device id, "
"only 0x5046 and 0x5159 are supported");
return;
}
pci_set_word(dev->config + PCI_DEVICE_ID, s->dev_id);
if (s->dev_id == PCI_DEVICE_ID_ATI_RADEON_QY &&
s->vga.vram_size_mb < 16) {
warn_report("Too small video memory for device id");
s->vga.vram_size_mb = 16;
}
/* init vga bits */
vga_common_init(vga, OBJECT(s));
vga_init(vga, OBJECT(s), pci_address_space(dev),
pci_address_space_io(dev), true);
vga->con = graphic_console_init(DEVICE(s), 0, s->vga.hw_ops, &s->vga);
if (s->cursor_guest_mode) {
vga->cursor_invalidate = ati_cursor_invalidate;
vga->cursor_draw_line = ati_cursor_draw_line;
}
/* mmio register space */
memory_region_init_io(&s->mm, OBJECT(s), &ati_mm_ops, s,
"ati.mmregs", 0x4000);
/* io space is alias to beginning of mmregs */
memory_region_init_alias(&s->io, OBJECT(s), "ati.io", &s->mm, 0, 0x100);
pci_register_bar(dev, 0, PCI_BASE_ADDRESS_MEM_PREFETCH, &vga->vram);
pci_register_bar(dev, 1, PCI_BASE_ADDRESS_SPACE_IO, &s->io);
pci_register_bar(dev, 2, PCI_BASE_ADDRESS_SPACE_MEMORY, &s->mm);
}
static void ati_vga_reset(DeviceState *dev)
{
ATIVGAState *s = ATI_VGA(dev);
/* reset vga */
vga_common_reset(&s->vga);
s->mode = VGA_MODE;
}
static void ati_vga_exit(PCIDevice *dev)
{
ATIVGAState *s = ATI_VGA(dev);
graphic_console_close(s->vga.con);
}
static Property ati_vga_properties[] = {
DEFINE_PROP_UINT32("vgamem_mb", ATIVGAState, vga.vram_size_mb, 16),
DEFINE_PROP_STRING("model", ATIVGAState, model),
DEFINE_PROP_UINT16("x-device-id", ATIVGAState, dev_id,
PCI_DEVICE_ID_ATI_RAGE128_PF),
DEFINE_PROP_BOOL("guest_hwcursor", ATIVGAState, cursor_guest_mode, false),
DEFINE_PROP_END_OF_LIST()
};
static void ati_vga_class_init(ObjectClass *klass, void *data)
{
DeviceClass *dc = DEVICE_CLASS(klass);
PCIDeviceClass *k = PCI_DEVICE_CLASS(klass);
dc->reset = ati_vga_reset;
dc->props = ati_vga_properties;
dc->hotpluggable = false;
set_bit(DEVICE_CATEGORY_DISPLAY, dc->categories);
k->class_id = PCI_CLASS_DISPLAY_VGA;
k->vendor_id = PCI_VENDOR_ID_ATI;
k->device_id = PCI_DEVICE_ID_ATI_RAGE128_PF;
k->romfile = "vgabios-stdvga.bin";
k->realize = ati_vga_realize;
k->exit = ati_vga_exit;
}
static const TypeInfo ati_vga_info = {
.name = TYPE_ATI_VGA,
.parent = TYPE_PCI_DEVICE,
.instance_size = sizeof(ATIVGAState),
.class_init = ati_vga_class_init,
.interfaces = (InterfaceInfo[]) {
{ INTERFACE_CONVENTIONAL_PCI_DEVICE },
{ },
},
};
static void ati_vga_register_types(void)
{
type_register_static(&ati_vga_info);
}
type_init(ati_vga_register_types)
Reference in New Issue View Git Blame Copy Permalink