mirror of
https://github.com/xemu-project/xemu.git
synced 2024-11-27 05:20:50 +00:00
50f8174c5c
Convert the ACPI NVDIMM spec document to rST. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Message-id: 20210727170414.3368-5-peter.maydell@linaro.org
229 lines
8.3 KiB
ReStructuredText
229 lines
8.3 KiB
ReStructuredText
QEMU<->ACPI BIOS NVDIMM interface
|
|
=================================
|
|
|
|
QEMU supports NVDIMM via ACPI. This document describes the basic concepts of
|
|
NVDIMM ACPI and the interface between QEMU and the ACPI BIOS.
|
|
|
|
NVDIMM ACPI Background
|
|
----------------------
|
|
|
|
NVDIMM is introduced in ACPI 6.0 which defines an NVDIMM root device under
|
|
_SB scope with a _HID of "ACPI0012". For each NVDIMM present or intended
|
|
to be supported by platform, platform firmware also exposes an ACPI
|
|
Namespace Device under the root device.
|
|
|
|
The NVDIMM child devices under the NVDIMM root device are defined with _ADR
|
|
corresponding to the NFIT device handle. The NVDIMM root device and the
|
|
NVDIMM devices can have device specific methods (_DSM) to provide additional
|
|
functions specific to a particular NVDIMM implementation.
|
|
|
|
This is an example from ACPI 6.0, a platform contains one NVDIMM::
|
|
|
|
Scope (\_SB){
|
|
Device (NVDR) // Root device
|
|
{
|
|
Name (_HID, "ACPI0012")
|
|
Method (_STA) {...}
|
|
Method (_FIT) {...}
|
|
Method (_DSM, ...) {...}
|
|
Device (NVD)
|
|
{
|
|
Name(_ADR, h) //where h is NFIT Device Handle for this NVDIMM
|
|
Method (_DSM, ...) {...}
|
|
}
|
|
}
|
|
}
|
|
|
|
Methods supported on both NVDIMM root device and NVDIMM device
|
|
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
|
|
|
|
_DSM (Device Specific Method)
|
|
It is a control method that enables devices to provide device specific
|
|
control functions that are consumed by the device driver.
|
|
The NVDIMM DSM specification can be found at
|
|
http://pmem.io/documents/NVDIMM_DSM_Interface_Example.pdf
|
|
|
|
Arguments:
|
|
|
|
Arg0
|
|
A Buffer containing a UUID (16 Bytes)
|
|
Arg1
|
|
An Integer containing the Revision ID (4 Bytes)
|
|
Arg2
|
|
An Integer containing the Function Index (4 Bytes)
|
|
Arg3
|
|
A package containing parameters for the function specified by the
|
|
UUID, Revision ID, and Function Index
|
|
|
|
Return Value:
|
|
|
|
If Function Index = 0, a Buffer containing a function index bitfield.
|
|
Otherwise, the return value and type depends on the UUID, revision ID
|
|
and function index which are described in the DSM specification.
|
|
|
|
Methods on NVDIMM ROOT Device
|
|
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
|
|
|
|
_FIT(Firmware Interface Table)
|
|
It evaluates to a buffer returning data in the format of a series of NFIT
|
|
Type Structure.
|
|
|
|
Arguments: None
|
|
|
|
Return Value:
|
|
A Buffer containing a list of NFIT Type structure entries.
|
|
|
|
The detailed definition of the structure can be found at ACPI 6.0: 5.2.25
|
|
NVDIMM Firmware Interface Table (NFIT).
|
|
|
|
QEMU NVDIMM Implementation
|
|
--------------------------
|
|
|
|
QEMU uses 4 bytes IO Port starting from 0x0a18 and a RAM-based memory page
|
|
for NVDIMM ACPI.
|
|
|
|
Memory:
|
|
QEMU uses BIOS Linker/loader feature to ask BIOS to allocate a memory
|
|
page and dynamically patch its address into an int32 object named "MEMA"
|
|
in ACPI.
|
|
|
|
This page is RAM-based and it is used to transfer data between _DSM
|
|
method and QEMU. If ACPI has control, this pages is owned by ACPI which
|
|
writes _DSM input data to it, otherwise, it is owned by QEMU which
|
|
emulates _DSM access and writes the output data to it.
|
|
|
|
ACPI writes _DSM Input Data (based on the offset in the page):
|
|
|
|
[0x0 - 0x3]
|
|
4 bytes, NVDIMM Device Handle.
|
|
|
|
The handle is completely QEMU internal thing, the values in
|
|
range [1, 0xFFFF] indicate nvdimm device. Other values are
|
|
reserved for other purposes.
|
|
|
|
Reserved handles:
|
|
|
|
- 0 is reserved for nvdimm root device named NVDR.
|
|
- 0x10000 is reserved for QEMU internal DSM function called on
|
|
the root device.
|
|
|
|
[0x4 - 0x7]
|
|
4 bytes, Revision ID, that is the Arg1 of _DSM method.
|
|
|
|
[0x8 - 0xB]
|
|
4 bytes. Function Index, that is the Arg2 of _DSM method.
|
|
|
|
[0xC - 0xFFF]
|
|
4084 bytes, the Arg3 of _DSM method.
|
|
|
|
QEMU writes Output Data (based on the offset in the page):
|
|
|
|
[0x0 - 0x3]
|
|
4 bytes, the length of result
|
|
|
|
[0x4 - 0xFFF]
|
|
4092 bytes, the DSM result filled by QEMU
|
|
|
|
IO Port 0x0a18 - 0xa1b:
|
|
ACPI writes the address of the memory page allocated by BIOS to this
|
|
port then QEMU gets the control and fills the result in the memory page.
|
|
|
|
Write Access:
|
|
|
|
[0x0a18 - 0xa1b]
|
|
4 bytes, the address of the memory page allocated by BIOS.
|
|
|
|
_DSM process diagram
|
|
--------------------
|
|
|
|
"MEMA" indicates the address of memory page allocated by BIOS.
|
|
|
|
::
|
|
|
|
+----------------------+ +-----------------------+
|
|
| 1. OSPM | | 2. OSPM |
|
|
| save _DSM input data | | write "MEMA" to | Exit to QEMU
|
|
| to the page +----->| IO port 0x0a18 +------------+
|
|
| indicated by "MEMA" | | | |
|
|
+----------------------+ +-----------------------+ |
|
|
|
|
|
v
|
|
+--------------------+ +-----------+ +------------------+--------+
|
|
| 5 QEMU | | 4 QEMU | | 3. QEMU |
|
|
| write _DSM result | | emulate | | get _DSM input data from |
|
|
| to the page +<------+ _DSM +<-----+ the page indicated by the |
|
|
| | | | | value from the IO port |
|
|
+--------+-----------+ +-----------+ +---------------------------+
|
|
|
|
|
| Enter Guest
|
|
|
|
|
v
|
|
+--------------------------+ +--------------+
|
|
| 6 OSPM | | 7 OSPM |
|
|
| result size is returned | | _DSM return |
|
|
| by reading DSM +----->+ |
|
|
| result from the page | | |
|
|
+--------------------------+ +--------------+
|
|
|
|
NVDIMM hotplug
|
|
--------------
|
|
|
|
ACPI BIOS GPE.4 handler is dedicated for notifying OS about nvdimm device
|
|
hot-add event.
|
|
|
|
QEMU internal use only _DSM functions
|
|
-------------------------------------
|
|
|
|
Read FIT
|
|
^^^^^^^^
|
|
|
|
_FIT method uses _DSM method to fetch NFIT structures blob from QEMU
|
|
in 1 page sized increments which are then concatenated and returned
|
|
as _FIT method result.
|
|
|
|
Input parameters:
|
|
|
|
Arg0
|
|
UUID {set to 648B9CF2-CDA1-4312-8AD9-49C4AF32BD62}
|
|
Arg1
|
|
Revision ID (set to 1)
|
|
Arg2
|
|
Function Index, 0x1
|
|
Arg3
|
|
A package containing a buffer whose layout is as follows:
|
|
|
|
+----------+--------+--------+-------------------------------------------+
|
|
| Field | Length | Offset | Description |
|
|
+----------+--------+--------+-------------------------------------------+
|
|
| offset | 4 | 0 | offset in QEMU's NFIT structures blob to |
|
|
| | | | read from |
|
|
+----------+--------+--------+-------------------------------------------+
|
|
|
|
Output layout in the dsm memory page:
|
|
|
|
+----------+--------+--------+-------------------------------------------+
|
|
| Field | Length | Offset | Description |
|
|
+----------+--------+--------+-------------------------------------------+
|
|
| length | 4 | 0 | length of entire returned data |
|
|
| | | | (including this header) |
|
|
+----------+--------+--------+-------------------------------------------+
|
|
| | | | return status codes |
|
|
| | | | |
|
|
| | | | - 0x0 - success |
|
|
| | | | - 0x100 - error caused by NFIT update |
|
|
| status | 4 | 4 | while read by _FIT wasn't completed |
|
|
| | | | - other codes follow Chapter 3 in |
|
|
| | | | DSM Spec Rev1 |
|
|
+----------+--------+--------+-------------------------------------------+
|
|
| fit data | Varies | 8 | contains FIT data. This field is present |
|
|
| | | | if status field is 0. |
|
|
+----------+--------+--------+-------------------------------------------+
|
|
|
|
The FIT offset is maintained by the OSPM itself, current offset plus
|
|
the size of the fit data returned by the function is the next offset
|
|
OSPM should read. When all FIT data has been read out, zero fit data
|
|
size is returned.
|
|
|
|
If it returns status code 0x100, OSPM should restart to read FIT (read
|
|
from offset 0 again).
|