mirror of
https://github.com/xemu-project/xemu.git
synced 2024-11-26 04:50:24 +00:00
96dd9aac37
This patch carries a complete rewrite of the usb descriptor parser. Changes / improvements: * We are using the USBDescriptor struct instead of hard-coded offsets now to access descriptor data. * (debug) printfs are all gone, tracepoints have been added instead. * We don't try (and fail) to skip over unneeded descriptors. We parse them all one by one. We keep track of which configuration, interface and altsetting we are looking at and use this information to figure which desciptors are in use and which we can ignore. * On parse errors we clear all endpoint information, which will disallow any communication with the device, except control endpoint messages. This makes sure we don't end up with a silly device state where half of the endpoints got enabled and the other half was left disabled. * Some sanity checks have been added. The new parser is more robust and also leaves complete device information in the trace log if you enable the ush_host_parse_* tracepoints. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
809 lines
51 KiB
Plaintext
809 lines
51 KiB
Plaintext
# Trace events for debugging and performance instrumentation
|
|
#
|
|
# This file is processed by the tracetool script during the build.
|
|
#
|
|
# To add a new trace event:
|
|
#
|
|
# 1. Choose a name for the trace event. Declare its arguments and format
|
|
# string.
|
|
#
|
|
# 2. Call the trace event from code using trace_##name, e.g. multiwrite_cb() ->
|
|
# trace_multiwrite_cb(). The source file must #include "trace.h".
|
|
#
|
|
# Format of a trace event:
|
|
#
|
|
# [disable] <name>(<type1> <arg1>[, <type2> <arg2>] ...) "<format-string>"
|
|
#
|
|
# Example: g_malloc(size_t size) "size %zu"
|
|
#
|
|
# The "disable" keyword will build without the trace event.
|
|
#
|
|
# The <name> must be a valid as a C function name.
|
|
#
|
|
# Types should be standard C types. Use void * for pointers because the trace
|
|
# system may not have the necessary headers included.
|
|
#
|
|
# The <format-string> should be a sprintf()-compatible format string.
|
|
|
|
# qemu-malloc.c
|
|
g_malloc(size_t size, void *ptr) "size %zu ptr %p"
|
|
g_realloc(void *ptr, size_t size, void *newptr) "ptr %p size %zu newptr %p"
|
|
g_free(void *ptr) "ptr %p"
|
|
|
|
# osdep.c
|
|
qemu_memalign(size_t alignment, size_t size, void *ptr) "alignment %zu size %zu ptr %p"
|
|
qemu_vmalloc(size_t size, void *ptr) "size %zu ptr %p"
|
|
qemu_vfree(void *ptr) "ptr %p"
|
|
|
|
# hw/virtio.c
|
|
virtqueue_fill(void *vq, const void *elem, unsigned int len, unsigned int idx) "vq %p elem %p len %u idx %u"
|
|
virtqueue_flush(void *vq, unsigned int count) "vq %p count %u"
|
|
virtqueue_pop(void *vq, void *elem, unsigned int in_num, unsigned int out_num) "vq %p elem %p in_num %u out_num %u"
|
|
virtio_queue_notify(void *vdev, int n, void *vq) "vdev %p n %d vq %p"
|
|
virtio_irq(void *vq) "vq %p"
|
|
virtio_notify(void *vdev, void *vq) "vdev %p vq %p"
|
|
virtio_set_status(void *vdev, uint8_t val) "vdev %p val %u"
|
|
|
|
# hw/virtio-serial-bus.c
|
|
virtio_serial_send_control_event(unsigned int port, uint16_t event, uint16_t value) "port %u, event %u, value %u"
|
|
virtio_serial_throttle_port(unsigned int port, bool throttle) "port %u, throttle %d"
|
|
virtio_serial_handle_control_message(uint16_t event, uint16_t value) "event %u, value %u"
|
|
virtio_serial_handle_control_message_port(unsigned int port) "port %u"
|
|
|
|
# hw/virtio-console.c
|
|
virtio_console_flush_buf(unsigned int port, size_t len, ssize_t ret) "port %u, in_len %zu, out_len %zd"
|
|
virtio_console_chr_read(unsigned int port, int size) "port %u, size %d"
|
|
virtio_console_chr_event(unsigned int port, int event) "port %u, event %d"
|
|
|
|
# block.c
|
|
bdrv_open_common(void *bs, const char *filename, int flags, const char *format_name) "bs %p filename \"%s\" flags %#x format_name \"%s\""
|
|
multiwrite_cb(void *mcb, int ret) "mcb %p ret %d"
|
|
bdrv_aio_multiwrite(void *mcb, int num_callbacks, int num_reqs) "mcb %p num_callbacks %d num_reqs %d"
|
|
bdrv_aio_discard(void *bs, int64_t sector_num, int nb_sectors, void *opaque) "bs %p sector_num %"PRId64" nb_sectors %d opaque %p"
|
|
bdrv_aio_flush(void *bs, void *opaque) "bs %p opaque %p"
|
|
bdrv_aio_readv(void *bs, int64_t sector_num, int nb_sectors, void *opaque) "bs %p sector_num %"PRId64" nb_sectors %d opaque %p"
|
|
bdrv_aio_writev(void *bs, int64_t sector_num, int nb_sectors, void *opaque) "bs %p sector_num %"PRId64" nb_sectors %d opaque %p"
|
|
bdrv_lock_medium(void *bs, bool locked) "bs %p locked %d"
|
|
bdrv_co_readv(void *bs, int64_t sector_num, int nb_sector) "bs %p sector_num %"PRId64" nb_sectors %d"
|
|
bdrv_co_copy_on_readv(void *bs, int64_t sector_num, int nb_sector) "bs %p sector_num %"PRId64" nb_sectors %d"
|
|
bdrv_co_writev(void *bs, int64_t sector_num, int nb_sector) "bs %p sector_num %"PRId64" nb_sectors %d"
|
|
bdrv_co_write_zeroes(void *bs, int64_t sector_num, int nb_sector) "bs %p sector_num %"PRId64" nb_sectors %d"
|
|
bdrv_co_io_em(void *bs, int64_t sector_num, int nb_sectors, int is_write, void *acb) "bs %p sector_num %"PRId64" nb_sectors %d is_write %d acb %p"
|
|
bdrv_co_do_copy_on_readv(void *bs, int64_t sector_num, int nb_sectors, int64_t cluster_sector_num, int cluster_nb_sectors) "bs %p sector_num %"PRId64" nb_sectors %d cluster_sector_num %"PRId64" cluster_nb_sectors %d"
|
|
|
|
# block/stream.c
|
|
stream_one_iteration(void *s, int64_t sector_num, int nb_sectors, int is_allocated) "s %p sector_num %"PRId64" nb_sectors %d is_allocated %d"
|
|
stream_start(void *bs, void *base, void *s, void *co, void *opaque) "bs %p base %p s %p co %p opaque %p"
|
|
|
|
# blockdev.c
|
|
qmp_block_job_cancel(void *job) "job %p"
|
|
block_stream_cb(void *bs, void *job, int ret) "bs %p job %p ret %d"
|
|
qmp_block_stream(void *bs, void *job) "bs %p job %p"
|
|
|
|
# hw/virtio-blk.c
|
|
virtio_blk_req_complete(void *req, int status) "req %p status %d"
|
|
virtio_blk_rw_complete(void *req, int ret) "req %p ret %d"
|
|
virtio_blk_handle_write(void *req, uint64_t sector, size_t nsectors) "req %p sector %"PRIu64" nsectors %zu"
|
|
virtio_blk_handle_read(void *req, uint64_t sector, size_t nsectors) "req %p sector %"PRIu64" nsectors %zu"
|
|
|
|
# posix-aio-compat.c
|
|
paio_submit(void *acb, void *opaque, int64_t sector_num, int nb_sectors, int type) "acb %p opaque %p sector_num %"PRId64" nb_sectors %d type %d"
|
|
paio_complete(void *acb, void *opaque, int ret) "acb %p opaque %p ret %d"
|
|
paio_cancel(void *acb, void *opaque) "acb %p opaque %p"
|
|
|
|
# ioport.c
|
|
cpu_in(unsigned int addr, unsigned int val) "addr %#x value %u"
|
|
cpu_out(unsigned int addr, unsigned int val) "addr %#x value %u"
|
|
|
|
# balloon.c
|
|
# Since requests are raised via monitor, not many tracepoints are needed.
|
|
balloon_event(void *opaque, unsigned long addr) "opaque %p addr %lu"
|
|
|
|
# hw/apic.c
|
|
apic_local_deliver(int vector, uint32_t lvt) "vector %d delivery mode %d"
|
|
apic_deliver_irq(uint8_t dest, uint8_t dest_mode, uint8_t delivery_mode, uint8_t vector_num, uint8_t trigger_mode) "dest %d dest_mode %d delivery_mode %d vector %d trigger_mode %d"
|
|
cpu_set_apic_base(uint64_t val) "%016"PRIx64
|
|
cpu_get_apic_base(uint64_t val) "%016"PRIx64
|
|
apic_mem_readl(uint64_t addr, uint32_t val) "%"PRIx64" = %08x"
|
|
apic_mem_writel(uint64_t addr, uint32_t val) "%"PRIx64" = %08x"
|
|
# coalescing
|
|
apic_report_irq_delivered(int apic_irq_delivered) "coalescing %d"
|
|
apic_reset_irq_delivered(int apic_irq_delivered) "old coalescing %d"
|
|
apic_get_irq_delivered(int apic_irq_delivered) "returning coalescing %d"
|
|
|
|
# hw/cs4231.c
|
|
cs4231_mem_readl_dreg(uint32_t reg, uint32_t ret) "read dreg %d: 0x%02x"
|
|
cs4231_mem_readl_reg(uint32_t reg, uint32_t ret) "read reg %d: 0x%08x"
|
|
cs4231_mem_writel_reg(uint32_t reg, uint32_t old, uint32_t val) "write reg %d: 0x%08x -> 0x%08x"
|
|
cs4231_mem_writel_dreg(uint32_t reg, uint32_t old, uint32_t val) "write dreg %d: 0x%02x -> 0x%02x"
|
|
|
|
# hw/ds1225y.c
|
|
nvram_read(uint32_t addr, uint32_t ret) "read addr %d: 0x%02x"
|
|
nvram_write(uint32_t addr, uint32_t old, uint32_t val) "write addr %d: 0x%02x -> 0x%02x"
|
|
|
|
# hw/eccmemctl.c
|
|
ecc_mem_writel_mer(uint32_t val) "Write memory enable %08x"
|
|
ecc_mem_writel_mdr(uint32_t val) "Write memory delay %08x"
|
|
ecc_mem_writel_mfsr(uint32_t val) "Write memory fault status %08x"
|
|
ecc_mem_writel_vcr(uint32_t val) "Write slot configuration %08x"
|
|
ecc_mem_writel_dr(uint32_t val) "Write diagnostic %08x"
|
|
ecc_mem_writel_ecr0(uint32_t val) "Write event count 1 %08x"
|
|
ecc_mem_writel_ecr1(uint32_t val) "Write event count 2 %08x"
|
|
ecc_mem_readl_mer(uint32_t ret) "Read memory enable %08x"
|
|
ecc_mem_readl_mdr(uint32_t ret) "Read memory delay %08x"
|
|
ecc_mem_readl_mfsr(uint32_t ret) "Read memory fault status %08x"
|
|
ecc_mem_readl_vcr(uint32_t ret) "Read slot configuration %08x"
|
|
ecc_mem_readl_mfar0(uint32_t ret) "Read memory fault address 0 %08x"
|
|
ecc_mem_readl_mfar1(uint32_t ret) "Read memory fault address 1 %08x"
|
|
ecc_mem_readl_dr(uint32_t ret) "Read diagnostic %08x"
|
|
ecc_mem_readl_ecr0(uint32_t ret) "Read event count 1 %08x"
|
|
ecc_mem_readl_ecr1(uint32_t ret) "Read event count 2 %08x"
|
|
ecc_diag_mem_writeb(uint64_t addr, uint32_t val) "Write diagnostic %"PRId64" = %02x"
|
|
ecc_diag_mem_readb(uint64_t addr, uint32_t ret) "Read diagnostic %"PRId64"= %02x"
|
|
|
|
# hw/jazz-led.c
|
|
jazz_led_read(uint64_t addr, uint8_t val) "read addr=0x%"PRIx64": 0x%x"
|
|
jazz_led_write(uint64_t addr, uint8_t new) "write addr=0x%"PRIx64": 0x%x"
|
|
|
|
# hw/lance.c
|
|
lance_mem_readw(uint64_t addr, uint32_t ret) "addr=%"PRIx64"val=0x%04x"
|
|
lance_mem_writew(uint64_t addr, uint32_t val) "addr=%"PRIx64"val=0x%04x"
|
|
|
|
# hw/slavio_intctl.c
|
|
slavio_intctl_mem_readl(uint32_t cpu, uint64_t addr, uint32_t ret) "read cpu %d reg 0x%"PRIx64" = %x"
|
|
slavio_intctl_mem_writel(uint32_t cpu, uint64_t addr, uint32_t val) "write cpu %d reg 0x%"PRIx64" = %x"
|
|
slavio_intctl_mem_writel_clear(uint32_t cpu, uint32_t val, uint32_t intreg_pending) "Cleared cpu %d irq mask %x, curmask %x"
|
|
slavio_intctl_mem_writel_set(uint32_t cpu, uint32_t val, uint32_t intreg_pending) "Set cpu %d irq mask %x, curmask %x"
|
|
slavio_intctlm_mem_readl(uint64_t addr, uint32_t ret) "read system reg 0x%"PRIx64" = %x"
|
|
slavio_intctlm_mem_writel(uint64_t addr, uint32_t val) "write system reg 0x%"PRIx64" = %x"
|
|
slavio_intctlm_mem_writel_enable(uint32_t val, uint32_t intregm_disabled) "Enabled master irq mask %x, curmask %x"
|
|
slavio_intctlm_mem_writel_disable(uint32_t val, uint32_t intregm_disabled) "Disabled master irq mask %x, curmask %x"
|
|
slavio_intctlm_mem_writel_target(uint32_t cpu) "Set master irq cpu %d"
|
|
slavio_check_interrupts(uint32_t pending, uint32_t intregm_disabled) "pending %x disabled %x"
|
|
slavio_set_irq(uint32_t target_cpu, int irq, uint32_t pil, int level) "Set cpu %d irq %d -> pil %d level %d"
|
|
slavio_set_timer_irq_cpu(int cpu, int level) "Set cpu %d local timer level %d"
|
|
|
|
# hw/slavio_misc.c
|
|
slavio_misc_update_irq_raise(void) "Raise IRQ"
|
|
slavio_misc_update_irq_lower(void) "Lower IRQ"
|
|
slavio_set_power_fail(int power_failing, uint8_t config) "Power fail: %d, config: %d"
|
|
slavio_cfg_mem_writeb(uint32_t val) "Write config %02x"
|
|
slavio_cfg_mem_readb(uint32_t ret) "Read config %02x"
|
|
slavio_diag_mem_writeb(uint32_t val) "Write diag %02x"
|
|
slavio_diag_mem_readb(uint32_t ret) "Read diag %02x"
|
|
slavio_mdm_mem_writeb(uint32_t val) "Write modem control %02x"
|
|
slavio_mdm_mem_readb(uint32_t ret) "Read modem control %02x"
|
|
slavio_aux1_mem_writeb(uint32_t val) "Write aux1 %02x"
|
|
slavio_aux1_mem_readb(uint32_t ret) "Read aux1 %02x"
|
|
slavio_aux2_mem_writeb(uint32_t val) "Write aux2 %02x"
|
|
slavio_aux2_mem_readb(uint32_t ret) "Read aux2 %02x"
|
|
apc_mem_writeb(uint32_t val) "Write power management %02x"
|
|
apc_mem_readb(uint32_t ret) "Read power management %02x"
|
|
slavio_sysctrl_mem_writel(uint32_t val) "Write system control %08x"
|
|
slavio_sysctrl_mem_readl(uint32_t ret) "Read system control %08x"
|
|
slavio_led_mem_writew(uint32_t val) "Write diagnostic LED %04x"
|
|
slavio_led_mem_readw(uint32_t ret) "Read diagnostic LED %04x"
|
|
|
|
# hw/slavio_timer.c
|
|
slavio_timer_get_out(uint64_t limit, uint32_t counthigh, uint32_t count) "limit %"PRIx64" count %x%08x"
|
|
slavio_timer_irq(uint32_t counthigh, uint32_t count) "callback: count %x%08x"
|
|
slavio_timer_mem_readl_invalid(uint64_t addr) "invalid read address %"PRIx64
|
|
slavio_timer_mem_readl(uint64_t addr, uint32_t ret) "read %"PRIx64" = %08x"
|
|
slavio_timer_mem_writel(uint64_t addr, uint32_t val) "write %"PRIx64" = %08x"
|
|
slavio_timer_mem_writel_limit(unsigned int timer_index, uint64_t count) "processor %d user timer set to %016"PRIx64
|
|
slavio_timer_mem_writel_counter_invalid(void) "not user timer"
|
|
slavio_timer_mem_writel_status_start(unsigned int timer_index) "processor %d user timer started"
|
|
slavio_timer_mem_writel_status_stop(unsigned int timer_index) "processor %d user timer stopped"
|
|
slavio_timer_mem_writel_mode_user(unsigned int timer_index) "processor %d changed from counter to user timer"
|
|
slavio_timer_mem_writel_mode_counter(unsigned int timer_index) "processor %d changed from user timer to counter"
|
|
slavio_timer_mem_writel_mode_invalid(void) "not system timer"
|
|
slavio_timer_mem_writel_invalid(uint64_t addr) "invalid write address %"PRIx64
|
|
|
|
# hw/sparc32_dma.c
|
|
ledma_memory_read(uint64_t addr) "DMA read addr 0x%"PRIx64
|
|
ledma_memory_write(uint64_t addr) "DMA write addr 0x%"PRIx64
|
|
sparc32_dma_set_irq_raise(void) "Raise IRQ"
|
|
sparc32_dma_set_irq_lower(void) "Lower IRQ"
|
|
espdma_memory_read(uint32_t addr) "DMA read addr 0x%08x"
|
|
espdma_memory_write(uint32_t addr) "DMA write addr 0x%08x"
|
|
sparc32_dma_mem_readl(uint64_t addr, uint32_t ret) "read dmareg %"PRIx64": 0x%08x"
|
|
sparc32_dma_mem_writel(uint64_t addr, uint32_t old, uint32_t val) "write dmareg %"PRIx64": 0x%08x -> 0x%08x"
|
|
sparc32_dma_enable_raise(void) "Raise DMA enable"
|
|
sparc32_dma_enable_lower(void) "Lower DMA enable"
|
|
|
|
# hw/sun4m.c
|
|
sun4m_cpu_interrupt(unsigned int level) "Set CPU IRQ %d"
|
|
sun4m_cpu_reset_interrupt(unsigned int level) "Reset CPU IRQ %d"
|
|
sun4m_cpu_set_irq_raise(int level) "Raise CPU IRQ %d"
|
|
sun4m_cpu_set_irq_lower(int level) "Lower CPU IRQ %d"
|
|
|
|
# hw/sun4m_iommu.c
|
|
sun4m_iommu_mem_readl(uint64_t addr, uint32_t ret) "read reg[%"PRIx64"] = %x"
|
|
sun4m_iommu_mem_writel(uint64_t addr, uint32_t val) "write reg[%"PRIx64"] = %x"
|
|
sun4m_iommu_mem_writel_ctrl(uint64_t iostart) "iostart = %"PRIx64
|
|
sun4m_iommu_mem_writel_tlbflush(uint32_t val) "tlb flush %x"
|
|
sun4m_iommu_mem_writel_pgflush(uint32_t val) "page flush %x"
|
|
sun4m_iommu_page_get_flags(uint64_t pa, uint64_t iopte, uint32_t ret) "get flags addr %"PRIx64" => pte %"PRIx64", *pte = %x"
|
|
sun4m_iommu_translate_pa(uint64_t addr, uint64_t pa, uint32_t iopte) "xlate dva %"PRIx64" => pa %"PRIx64" iopte = %x"
|
|
sun4m_iommu_bad_addr(uint64_t addr) "bad addr %"PRIx64
|
|
|
|
# hw/usb/core.c
|
|
usb_packet_state_change(int bus, const char *port, int ep, void *p, const char *o, const char *n) "bus %d, port %s, ep %d, packet %p, state %s -> %s"
|
|
usb_packet_state_fault(int bus, const char *port, int ep, void *p, const char *o, const char *n) "bus %d, port %s, ep %d, packet %p, state %s, expected %s"
|
|
|
|
# hw/usb/bus.c
|
|
usb_port_claim(int bus, const char *port) "bus %d, port %s"
|
|
usb_port_attach(int bus, const char *port) "bus %d, port %s"
|
|
usb_port_detach(int bus, const char *port) "bus %d, port %s"
|
|
usb_port_release(int bus, const char *port) "bus %d, port %s"
|
|
|
|
# hw/usb/hcd-ehci.c
|
|
usb_ehci_reset(void) "=== RESET ==="
|
|
usb_ehci_mmio_readl(uint32_t addr, const char *str, uint32_t val) "rd mmio %04x [%s] = %x"
|
|
usb_ehci_mmio_writel(uint32_t addr, const char *str, uint32_t val) "wr mmio %04x [%s] = %x"
|
|
usb_ehci_mmio_change(uint32_t addr, const char *str, uint32_t new, uint32_t old) "ch mmio %04x [%s] = %x (old: %x)"
|
|
usb_ehci_usbsts(const char *sts, int state) "usbsts %s %d"
|
|
usb_ehci_state(const char *schedule, const char *state) "%s schedule %s"
|
|
usb_ehci_qh_ptrs(void *q, uint32_t addr, uint32_t nxt, uint32_t c_qtd, uint32_t n_qtd, uint32_t a_qtd) "q %p - QH @ %08x: next %08x qtds %08x,%08x,%08x"
|
|
usb_ehci_qh_fields(uint32_t addr, int rl, int mplen, int eps, int ep, int devaddr) "QH @ %08x - rl %d, mplen %d, eps %d, ep %d, dev %d"
|
|
usb_ehci_qh_bits(uint32_t addr, int c, int h, int dtc, int i) "QH @ %08x - c %d, h %d, dtc %d, i %d"
|
|
usb_ehci_qtd_ptrs(void *q, uint32_t addr, uint32_t nxt, uint32_t altnext) "q %p - QTD @ %08x: next %08x altnext %08x"
|
|
usb_ehci_qtd_fields(uint32_t addr, int tbytes, int cpage, int cerr, int pid) "QTD @ %08x - tbytes %d, cpage %d, cerr %d, pid %d"
|
|
usb_ehci_qtd_bits(uint32_t addr, int ioc, int active, int halt, int babble, int xacterr) "QTD @ %08x - ioc %d, active %d, halt %d, babble %d, xacterr %d"
|
|
usb_ehci_itd(uint32_t addr, uint32_t nxt, uint32_t mplen, uint32_t mult, uint32_t ep, uint32_t devaddr) "ITD @ %08x: next %08x - mplen %d, mult %d, ep %d, dev %d"
|
|
usb_ehci_sitd(uint32_t addr, uint32_t nxt, uint32_t active) "ITD @ %08x: next %08x - active %d"
|
|
usb_ehci_port_attach(uint32_t port, const char *device) "attach port #%d - %s"
|
|
usb_ehci_port_detach(uint32_t port) "detach port #%d"
|
|
usb_ehci_port_reset(uint32_t port, int enable) "reset port #%d - %d"
|
|
usb_ehci_data(int rw, uint32_t cpage, uint32_t offset, uint32_t addr, uint32_t len, uint32_t bufpos) "write %d, cpage %d, offset 0x%03x, addr 0x%08x, len %d, bufpos %d"
|
|
usb_ehci_queue_action(void *q, const char *action) "q %p: %s"
|
|
|
|
# hw/usb/hcd-uhci.c
|
|
usb_uhci_reset(void) "=== RESET ==="
|
|
usb_uhci_schedule_start(void) ""
|
|
usb_uhci_schedule_stop(void) ""
|
|
usb_uhci_frame_start(uint32_t num) "nr %d"
|
|
usb_uhci_frame_loop_stop_idle(void) ""
|
|
usb_uhci_frame_loop_stop_bandwidth(void) ""
|
|
usb_uhci_frame_loop_continue(void) ""
|
|
usb_uhci_mmio_readw(uint32_t addr, uint32_t val) "addr %04x, ret 0x04%x"
|
|
usb_uhci_mmio_writew(uint32_t addr, uint32_t val) "addr %04x, val 0x04%x"
|
|
usb_uhci_mmio_readl(uint32_t addr, uint32_t val) "addr %04x, ret 0x08%x"
|
|
usb_uhci_mmio_writel(uint32_t addr, uint32_t val) "addr %04x, val 0x08%x"
|
|
usb_uhci_queue_add(uint32_t token) "token 0x%x"
|
|
usb_uhci_queue_del(uint32_t token) "token 0x%x"
|
|
usb_uhci_packet_add(uint32_t token, uint32_t addr) "token 0x%x, td 0x%x"
|
|
usb_uhci_packet_link_async(uint32_t token, uint32_t addr) "token 0x%x, td 0x%x"
|
|
usb_uhci_packet_unlink_async(uint32_t token, uint32_t addr) "token 0x%x, td 0x%x"
|
|
usb_uhci_packet_cancel(uint32_t token, uint32_t addr, int done) "token 0x%x, td 0x%x, done %d"
|
|
usb_uhci_packet_complete_success(uint32_t token, uint32_t addr) "token 0x%x, td 0x%x"
|
|
usb_uhci_packet_complete_shortxfer(uint32_t token, uint32_t addr) "token 0x%x, td 0x%x"
|
|
usb_uhci_packet_complete_stall(uint32_t token, uint32_t addr) "token 0x%x, td 0x%x"
|
|
usb_uhci_packet_complete_babble(uint32_t token, uint32_t addr) "token 0x%x, td 0x%x"
|
|
usb_uhci_packet_complete_error(uint32_t token, uint32_t addr) "token 0x%x, td 0x%x"
|
|
usb_uhci_packet_del(uint32_t token, uint32_t addr) "token 0x%x, td 0x%x"
|
|
usb_uhci_qh_load(uint32_t qh) "qh 0x%x"
|
|
usb_uhci_td_load(uint32_t qh, uint32_t td, uint32_t ctrl, uint32_t token) "qh 0x%x, td 0x%x, ctrl 0x%x, token 0x%x"
|
|
usb_uhci_td_queue(uint32_t td, uint32_t ctrl, uint32_t token) "td 0x%x, ctrl 0x%x, token 0x%x"
|
|
usb_uhci_td_nextqh(uint32_t qh, uint32_t td) "qh 0x%x, td 0x%x"
|
|
usb_uhci_td_async(uint32_t qh, uint32_t td) "qh 0x%x, td 0x%x"
|
|
usb_uhci_td_complete(uint32_t qh, uint32_t td) "qh 0x%x, td 0x%x"
|
|
|
|
# hw/usb/desc.c
|
|
usb_desc_device(int addr, int len, int ret) "dev %d query device, len %d, ret %d"
|
|
usb_desc_device_qualifier(int addr, int len, int ret) "dev %d query device qualifier, len %d, ret %d"
|
|
usb_desc_config(int addr, int index, int len, int ret) "dev %d query config %d, len %d, ret %d"
|
|
usb_desc_other_speed_config(int addr, int index, int len, int ret) "dev %d query config %d, len %d, ret %d"
|
|
usb_desc_string(int addr, int index, int len, int ret) "dev %d query string %d, len %d, ret %d"
|
|
usb_set_addr(int addr) "dev %d"
|
|
usb_set_config(int addr, int config, int ret) "dev %d, config %d, ret %d"
|
|
usb_set_interface(int addr, int iface, int alt, int ret) "dev %d, interface %d, altsetting %d, ret %d"
|
|
usb_clear_device_feature(int addr, int feature, int ret) "dev %d, feature %d, ret %d"
|
|
usb_set_device_feature(int addr, int feature, int ret) "dev %d, feature %d, ret %d"
|
|
|
|
# hw/usb/dev-hub.c
|
|
usb_hub_reset(int addr) "dev %d"
|
|
usb_hub_control(int addr, int request, int value, int index, int length) "dev %d, req 0x%x, value %d, index %d, langth %d"
|
|
usb_hub_get_port_status(int addr, int nr, int status, int changed) "dev %d, port %d, status 0x%x, changed 0x%x"
|
|
usb_hub_set_port_feature(int addr, int nr, const char *f) "dev %d, port %d, feature %s"
|
|
usb_hub_clear_port_feature(int addr, int nr, const char *f) "dev %d, port %d, feature %s"
|
|
usb_hub_attach(int addr, int nr) "dev %d, port %d"
|
|
usb_hub_detach(int addr, int nr) "dev %d, port %d"
|
|
|
|
# hw/usb/host-linux.c
|
|
usb_host_open_started(int bus, int addr) "dev %d:%d"
|
|
usb_host_open_success(int bus, int addr) "dev %d:%d"
|
|
usb_host_open_failure(int bus, int addr) "dev %d:%d"
|
|
usb_host_disconnect(int bus, int addr) "dev %d:%d"
|
|
usb_host_close(int bus, int addr) "dev %d:%d"
|
|
usb_host_set_address(int bus, int addr, int config) "dev %d:%d, address %d"
|
|
usb_host_set_config(int bus, int addr, int config) "dev %d:%d, config %d"
|
|
usb_host_set_interface(int bus, int addr, int interface, int alt) "dev %d:%d, interface %d, alt %d"
|
|
usb_host_claim_interfaces(int bus, int addr, int config, int nif) "dev %d:%d, config %d, nif %d"
|
|
usb_host_release_interfaces(int bus, int addr) "dev %d:%d"
|
|
usb_host_req_control(int bus, int addr, void *p, int req, int value, int index) "dev %d:%d, packet %p, req 0x%x, value %d, index %d"
|
|
usb_host_req_data(int bus, int addr, void *p, int in, int ep, int size) "dev %d:%d, packet %p, in %d, ep %d, size %d"
|
|
usb_host_req_complete(int bus, int addr, void *p, int status) "dev %d:%d, packet %p, status %d"
|
|
usb_host_req_emulated(int bus, int addr, void *p, int status) "dev %d:%d, packet %p, status %d"
|
|
usb_host_req_canceled(int bus, int addr, void *p) "dev %d:%d, packet %p"
|
|
usb_host_urb_submit(int bus, int addr, void *aurb, int length, int more) "dev %d:%d, aurb %p, length %d, more %d"
|
|
usb_host_urb_complete(int bus, int addr, void *aurb, int status, int length, int more) "dev %d:%d, aurb %p, status %d, length %d, more %d"
|
|
usb_host_urb_canceled(int bus, int addr, void *aurb) "dev %d:%d, aurb %p"
|
|
usb_host_ep_set_halt(int bus, int addr, int ep) "dev %d:%d, ep %d"
|
|
usb_host_ep_clear_halt(int bus, int addr, int ep) "dev %d:%d, ep %d"
|
|
usb_host_ep_start_iso(int bus, int addr, int ep) "dev %d:%d, ep %d"
|
|
usb_host_ep_stop_iso(int bus, int addr, int ep) "dev %d:%d, ep %d"
|
|
usb_host_reset(int bus, int addr) "dev %d:%d"
|
|
usb_host_auto_scan_enabled(void)
|
|
usb_host_auto_scan_disabled(void)
|
|
usb_host_claim_port(int bus, int hub, int port) "bus %d, hub addr %d, port %d"
|
|
usb_host_parse_device(int bus, int addr, int vendor, int product) "dev %d:%d, id %04x:%04x"
|
|
usb_host_parse_config(int bus, int addr, int value, int active) "dev %d:%d, value %d, active %d"
|
|
usb_host_parse_interface(int bus, int addr, int num, int alt, int active) "dev %d:%d, num %d, alt %d, active %d"
|
|
usb_host_parse_endpoint(int bus, int addr, int ep, const char *dir, const char *type, int active) "dev %d:%d, ep %d, %s, %s, active %d"
|
|
usb_host_parse_unknown(int bus, int addr, int len, int type) "dev %d:%d, len %d, type %d"
|
|
usb_host_parse_error(int bus, int addr, const char *errmsg) "dev %d:%d, msg %s"
|
|
|
|
# hw/scsi-bus.c
|
|
scsi_req_alloc(int target, int lun, int tag) "target %d lun %d tag %d"
|
|
scsi_req_data(int target, int lun, int tag, int len) "target %d lun %d tag %d len %d"
|
|
scsi_req_data_canceled(int target, int lun, int tag, int len) "target %d lun %d tag %d len %d"
|
|
scsi_req_dequeue(int target, int lun, int tag) "target %d lun %d tag %d"
|
|
scsi_req_continue(int target, int lun, int tag) "target %d lun %d tag %d"
|
|
scsi_req_parsed(int target, int lun, int tag, int cmd, int mode, int xfer) "target %d lun %d tag %d command %d dir %d length %d"
|
|
scsi_req_parsed_lba(int target, int lun, int tag, int cmd, uint64_t lba) "target %d lun %d tag %d command %d lba %"PRIu64
|
|
scsi_req_parse_bad(int target, int lun, int tag, int cmd) "target %d lun %d tag %d command %d"
|
|
scsi_req_build_sense(int target, int lun, int tag, int key, int asc, int ascq) "target %d lun %d tag %d key %#02x asc %#02x ascq %#02x"
|
|
scsi_report_luns(int target, int lun, int tag) "target %d lun %d tag %d"
|
|
scsi_inquiry(int target, int lun, int tag, int cdb1, int cdb2) "target %d lun %d tag %d page %#02x/%#02x"
|
|
scsi_test_unit_ready(int target, int lun, int tag) "target %d lun %d tag %d"
|
|
scsi_request_sense(int target, int lun, int tag) "target %d lun %d tag %d"
|
|
|
|
# vl.c
|
|
vm_state_notify(int running, int reason) "running %d reason %d"
|
|
|
|
# block/qcow2.c
|
|
qcow2_writev_start_req(void *co, int64_t sector, int nb_sectors) "co %p sector %" PRIx64 " nb_sectors %d"
|
|
qcow2_writev_done_req(void *co, int ret) "co %p ret %d"
|
|
qcow2_writev_start_part(void *co) "co %p"
|
|
qcow2_writev_done_part(void *co, int cur_nr_sectors) "co %p cur_nr_sectors %d"
|
|
qcow2_writev_data(void *co, uint64_t offset) "co %p offset %" PRIx64
|
|
|
|
qcow2_alloc_clusters_offset(void *co, uint64_t offset, int n_start, int n_end) "co %p offet %" PRIx64 " n_start %d n_end %d"
|
|
qcow2_do_alloc_clusters_offset(void *co, uint64_t guest_offset, uint64_t host_offset, int nb_clusters) "co %p guest_offet %" PRIx64 " host_offset %" PRIx64 " nb_clusters %d"
|
|
qcow2_cluster_alloc_phys(void *co) "co %p"
|
|
qcow2_cluster_link_l2(void *co, int nb_clusters) "co %p nb_clusters %d"
|
|
|
|
qcow2_l2_allocate(void *bs, int l1_index) "bs %p l1_index %d"
|
|
qcow2_l2_allocate_get_empty(void *bs, int l1_index) "bs %p l1_index %d"
|
|
qcow2_l2_allocate_write_l2(void *bs, int l1_index) "bs %p l1_index %d"
|
|
qcow2_l2_allocate_write_l1(void *bs, int l1_index) "bs %p l1_index %d"
|
|
qcow2_l2_allocate_done(void *bs, int l1_index, int ret) "bs %p l1_index %d ret %d"
|
|
|
|
qcow2_cache_get(void *co, int c, uint64_t offset, bool read_from_disk) "co %p is_l2_cache %d offset %" PRIx64 " read_from_disk %d"
|
|
qcow2_cache_get_replace_entry(void *co, int c, int i) "co %p is_l2_cache %d index %d"
|
|
qcow2_cache_get_read(void *co, int c, int i) "co %p is_l2_cache %d index %d"
|
|
qcow2_cache_get_done(void *co, int c, int i) "co %p is_l2_cache %d index %d"
|
|
qcow2_cache_flush(void *co, int c) "co %p is_l2_cache %d"
|
|
qcow2_cache_entry_flush(void *co, int c, int i) "co %p is_l2_cache %d index %d"
|
|
|
|
# block/qed-l2-cache.c
|
|
qed_alloc_l2_cache_entry(void *l2_cache, void *entry) "l2_cache %p entry %p"
|
|
qed_unref_l2_cache_entry(void *entry, int ref) "entry %p ref %d"
|
|
qed_find_l2_cache_entry(void *l2_cache, void *entry, uint64_t offset, int ref) "l2_cache %p entry %p offset %"PRIu64" ref %d"
|
|
|
|
# block/qed-table.c
|
|
qed_read_table(void *s, uint64_t offset, void *table) "s %p offset %"PRIu64" table %p"
|
|
qed_read_table_cb(void *s, void *table, int ret) "s %p table %p ret %d"
|
|
qed_write_table(void *s, uint64_t offset, void *table, unsigned int index, unsigned int n) "s %p offset %"PRIu64" table %p index %u n %u"
|
|
qed_write_table_cb(void *s, void *table, int flush, int ret) "s %p table %p flush %d ret %d"
|
|
|
|
# block/qed.c
|
|
qed_need_check_timer_cb(void *s) "s %p"
|
|
qed_start_need_check_timer(void *s) "s %p"
|
|
qed_cancel_need_check_timer(void *s) "s %p"
|
|
qed_aio_complete(void *s, void *acb, int ret) "s %p acb %p ret %d"
|
|
qed_aio_setup(void *s, void *acb, int64_t sector_num, int nb_sectors, void *opaque, int flags) "s %p acb %p sector_num %"PRId64" nb_sectors %d opaque %p flags %#x"
|
|
qed_aio_next_io(void *s, void *acb, int ret, uint64_t cur_pos) "s %p acb %p ret %d cur_pos %"PRIu64
|
|
qed_aio_read_data(void *s, void *acb, int ret, uint64_t offset, size_t len) "s %p acb %p ret %d offset %"PRIu64" len %zu"
|
|
qed_aio_write_data(void *s, void *acb, int ret, uint64_t offset, size_t len) "s %p acb %p ret %d offset %"PRIu64" len %zu"
|
|
qed_aio_write_prefill(void *s, void *acb, uint64_t start, size_t len, uint64_t offset) "s %p acb %p start %"PRIu64" len %zu offset %"PRIu64
|
|
qed_aio_write_postfill(void *s, void *acb, uint64_t start, size_t len, uint64_t offset) "s %p acb %p start %"PRIu64" len %zu offset %"PRIu64
|
|
qed_aio_write_main(void *s, void *acb, int ret, uint64_t offset, size_t len) "s %p acb %p ret %d offset %"PRIu64" len %zu"
|
|
|
|
# hw/g364fb.c
|
|
g364fb_read(uint64_t addr, uint32_t val) "read addr=0x%"PRIx64": 0x%x"
|
|
g364fb_write(uint64_t addr, uint32_t new) "write addr=0x%"PRIx64": 0x%x"
|
|
|
|
# hw/grlib_gptimer.c
|
|
grlib_gptimer_enable(int id, uint32_t count) "timer:%d set count 0x%x and run"
|
|
grlib_gptimer_disabled(int id, uint32_t config) "timer:%d Timer disable config 0x%x"
|
|
grlib_gptimer_restart(int id, uint32_t reload) "timer:%d reload val: 0x%x"
|
|
grlib_gptimer_set_scaler(uint32_t scaler, uint32_t freq) "scaler:0x%x freq: 0x%x"
|
|
grlib_gptimer_hit(int id) "timer:%d HIT"
|
|
grlib_gptimer_readl(int id, uint64_t addr, uint32_t val) "timer:%d addr 0x%"PRIx64" 0x%x"
|
|
grlib_gptimer_writel(int id, uint64_t addr, uint32_t val) "timer:%d addr 0x%"PRIx64" 0x%x"
|
|
|
|
# hw/grlib_irqmp.c
|
|
grlib_irqmp_check_irqs(uint32_t pend, uint32_t force, uint32_t mask, uint32_t lvl1, uint32_t lvl2) "pend:0x%04x force:0x%04x mask:0x%04x lvl1:0x%04x lvl0:0x%04x"
|
|
grlib_irqmp_ack(int intno) "interrupt:%d"
|
|
grlib_irqmp_set_irq(int irq) "Raise CPU IRQ %d"
|
|
grlib_irqmp_readl_unknown(uint64_t addr) "addr 0x%"PRIx64
|
|
grlib_irqmp_writel_unknown(uint64_t addr, uint32_t value) "addr 0x%"PRIx64" value 0x%x"
|
|
|
|
# hw/grlib_apbuart.c
|
|
grlib_apbuart_event(int event) "event:%d"
|
|
grlib_apbuart_writel_unknown(uint64_t addr, uint32_t value) "addr 0x%"PRIx64" value 0x%x"
|
|
grlib_apbuart_readl_unknown(uint64_t addr) "addr 0x%"PRIx64""
|
|
|
|
# hw/leon3.c
|
|
leon3_set_irq(int intno) "Set CPU IRQ %d"
|
|
leon3_reset_irq(int intno) "Reset CPU IRQ %d"
|
|
|
|
# spice-qemu-char.c
|
|
spice_vmc_write(ssize_t out, int len) "spice wrottn %zd of requested %d"
|
|
spice_vmc_read(int bytes, int len) "spice read %d of requested %d"
|
|
spice_vmc_register_interface(void *scd) "spice vmc registered interface %p"
|
|
spice_vmc_unregister_interface(void *scd) "spice vmc unregistered interface %p"
|
|
|
|
# hw/lm32_pic.c
|
|
lm32_pic_raise_irq(void) "Raise CPU interrupt"
|
|
lm32_pic_lower_irq(void) "Lower CPU interrupt"
|
|
lm32_pic_interrupt(int irq, int level) "Set IRQ%d %d"
|
|
lm32_pic_set_im(uint32_t im) "im 0x%08x"
|
|
lm32_pic_set_ip(uint32_t ip) "ip 0x%08x"
|
|
lm32_pic_get_im(uint32_t im) "im 0x%08x"
|
|
lm32_pic_get_ip(uint32_t ip) "ip 0x%08x"
|
|
|
|
# hw/lm32_juart.c
|
|
lm32_juart_get_jtx(uint32_t value) "jtx 0x%08x"
|
|
lm32_juart_set_jtx(uint32_t value) "jtx 0x%08x"
|
|
lm32_juart_get_jrx(uint32_t value) "jrx 0x%08x"
|
|
lm32_juart_set_jrx(uint32_t value) "jrx 0x%08x"
|
|
|
|
# hw/lm32_timer.c
|
|
lm32_timer_memory_write(uint32_t addr, uint32_t value) "addr 0x%08x value 0x%08x"
|
|
lm32_timer_memory_read(uint32_t addr, uint32_t value) "addr 0x%08x value 0x%08x"
|
|
lm32_timer_hit(void) "timer hit"
|
|
lm32_timer_irq_state(int level) "irq state %d"
|
|
|
|
# hw/lm32_uart.c
|
|
lm32_uart_memory_write(uint32_t addr, uint32_t value) "addr 0x%08x value 0x%08x"
|
|
lm32_uart_memory_read(uint32_t addr, uint32_t value) "addr 0x%08x value 0x%08x"
|
|
lm32_uart_irq_state(int level) "irq state %d"
|
|
|
|
# hw/lm32_sys.c
|
|
lm32_sys_memory_write(uint32_t addr, uint32_t value) "addr 0x%08x value 0x%08x"
|
|
|
|
# hw/milkymist-ac97.c
|
|
milkymist_ac97_memory_read(uint32_t addr, uint32_t value) "addr %08x value %08x"
|
|
milkymist_ac97_memory_write(uint32_t addr, uint32_t value) "addr %08x value %08x"
|
|
milkymist_ac97_pulse_irq_crrequest(void) "Pulse IRQ CR request"
|
|
milkymist_ac97_pulse_irq_crreply(void) "Pulse IRQ CR reply"
|
|
milkymist_ac97_pulse_irq_dmaw(void) "Pulse IRQ DMA write"
|
|
milkymist_ac97_pulse_irq_dmar(void) "Pulse IRQ DMA read"
|
|
milkymist_ac97_in_cb(int avail, uint32_t remaining) "avail %d remaining %u"
|
|
milkymist_ac97_in_cb_transferred(int transferred) "transferred %d"
|
|
milkymist_ac97_out_cb(int free, uint32_t remaining) "free %d remaining %u"
|
|
milkymist_ac97_out_cb_transferred(int transferred) "transferred %d"
|
|
|
|
# hw/milkymist-hpdmc.c
|
|
milkymist_hpdmc_memory_read(uint32_t addr, uint32_t value) "addr=%08x value=%08x"
|
|
milkymist_hpdmc_memory_write(uint32_t addr, uint32_t value) "addr=%08x value=%08x"
|
|
|
|
# hw/milkymist-memcard.c
|
|
milkymist_memcard_memory_read(uint32_t addr, uint32_t value) "addr %08x value %08x"
|
|
milkymist_memcard_memory_write(uint32_t addr, uint32_t value) "addr %08x value %08x"
|
|
|
|
# hw/milkymist-minimac2.c
|
|
milkymist_minimac2_memory_read(uint32_t addr, uint32_t value) "addr %08x value %08x"
|
|
milkymist_minimac2_memory_write(uint32_t addr, uint32_t value) "addr %08x value %08x"
|
|
milkymist_minimac2_mdio_write(uint8_t phy_addr, uint8_t addr, uint16_t value) "phy_addr %02x addr %02x value %04x"
|
|
milkymist_minimac2_mdio_read(uint8_t phy_addr, uint8_t addr, uint16_t value) "phy_addr %02x addr %02x value %04x"
|
|
milkymist_minimac2_tx_frame(uint32_t length) "length %u"
|
|
milkymist_minimac2_rx_frame(const void *buf, uint32_t length) "buf %p length %u"
|
|
milkymist_minimac2_drop_rx_frame(const void *buf) "buf %p"
|
|
milkymist_minimac2_rx_transfer(const void *buf, uint32_t length) "buf %p length %d"
|
|
milkymist_minimac2_raise_irq_rx(void) "Raise IRQ RX"
|
|
milkymist_minimac2_lower_irq_rx(void) "Lower IRQ RX"
|
|
milkymist_minimac2_pulse_irq_tx(void) "Pulse IRQ TX"
|
|
|
|
# hw/milkymist-pfpu.c
|
|
milkymist_pfpu_memory_read(uint32_t addr, uint32_t value) "addr %08x value %08x"
|
|
milkymist_pfpu_memory_write(uint32_t addr, uint32_t value) "addr %08x value %08x"
|
|
milkymist_pfpu_vectout(uint32_t a, uint32_t b, uint32_t dma_ptr) "a %08x b %08x dma_ptr %08x"
|
|
milkymist_pfpu_pulse_irq(void) "Pulse IRQ"
|
|
|
|
# hw/milkymist-softusb.c
|
|
milkymist_softusb_memory_read(uint32_t addr, uint32_t value) "addr %08x value %08x"
|
|
milkymist_softusb_memory_write(uint32_t addr, uint32_t value) "addr %08x value %08x"
|
|
milkymist_softusb_mevt(uint8_t m) "m %d"
|
|
milkymist_softusb_kevt(uint8_t m) "m %d"
|
|
milkymist_softusb_mouse_event(int dx, int dy, int dz, int bs) "dx %d dy %d dz %d bs %02x"
|
|
milkymist_softusb_pulse_irq(void) "Pulse IRQ"
|
|
|
|
# hw/milkymist-sysctl.c
|
|
milkymist_sysctl_memory_read(uint32_t addr, uint32_t value) "addr %08x value %08x"
|
|
milkymist_sysctl_memory_write(uint32_t addr, uint32_t value) "addr %08x value %08x"
|
|
milkymist_sysctl_icap_write(uint32_t value) "value %08x"
|
|
milkymist_sysctl_start_timer0(void) "Start timer0"
|
|
milkymist_sysctl_stop_timer0(void) "Stop timer0"
|
|
milkymist_sysctl_start_timer1(void) "Start timer1"
|
|
milkymist_sysctl_stop_timer1(void) "Stop timer1"
|
|
milkymist_sysctl_pulse_irq_timer0(void) "Pulse IRQ Timer0"
|
|
milkymist_sysctl_pulse_irq_timer1(void) "Pulse IRQ Timer1"
|
|
|
|
# hw/milkymist-tmu2.c
|
|
milkymist_tmu2_memory_read(uint32_t addr, uint32_t value) "addr %08x value %08x"
|
|
milkymist_tmu2_memory_write(uint32_t addr, uint32_t value) "addr %08x value %08x"
|
|
milkymist_tmu2_start(void) "Start TMU"
|
|
milkymist_tmu2_pulse_irq(void) "Pulse IRQ"
|
|
|
|
# hw/milkymist-uart.c
|
|
milkymist_uart_memory_read(uint32_t addr, uint32_t value) "addr %08x value %08x"
|
|
milkymist_uart_memory_write(uint32_t addr, uint32_t value) "addr %08x value %08x"
|
|
milkymist_uart_raise_irq(void) "Raise IRQ"
|
|
milkymist_uart_lower_irq(void) "Lower IRQ"
|
|
|
|
# hw/milkymist-vgafb.c
|
|
milkymist_vgafb_memory_read(uint32_t addr, uint32_t value) "addr %08x value %08x"
|
|
milkymist_vgafb_memory_write(uint32_t addr, uint32_t value) "addr %08x value %08x"
|
|
|
|
# hw/mipsnet.c
|
|
mipsnet_send(uint32_t size) "sending len=%u"
|
|
mipsnet_receive(uint32_t size) "receiving len=%u"
|
|
mipsnet_read(uint64_t addr, uint32_t val) "read addr=0x%" PRIx64 " val=0x%x"
|
|
mipsnet_write(uint64_t addr, uint64_t val) "write addr=0x%" PRIx64 " val=0x%" PRIx64 ""
|
|
mipsnet_irq(uint32_t isr, uint32_t intctl) "set irq to %d (%02x)"
|
|
|
|
# xen-all.c
|
|
xen_ram_alloc(unsigned long ram_addr, unsigned long size) "requested: %#lx, size %#lx"
|
|
xen_client_set_memory(uint64_t start_addr, unsigned long size, bool log_dirty) "%#"PRIx64" size %#lx, log_dirty %i"
|
|
|
|
# xen-mapcache.c
|
|
xen_map_cache(uint64_t phys_addr) "want %#"PRIx64
|
|
xen_remap_bucket(uint64_t index) "index %#"PRIx64
|
|
xen_map_cache_return(void* ptr) "%p"
|
|
xen_map_block(uint64_t phys_addr, uint64_t size) "%#"PRIx64", size %#"PRIx64
|
|
xen_unmap_block(void* addr, unsigned long size) "%p, size %#lx"
|
|
|
|
# exec.c
|
|
qemu_put_ram_ptr(void* addr) "%p"
|
|
|
|
# hw/xen_platform.c
|
|
xen_platform_log(char *s) "xen platform: %s"
|
|
|
|
# qemu-coroutine.c
|
|
qemu_coroutine_enter(void *from, void *to, void *opaque) "from %p to %p opaque %p"
|
|
qemu_coroutine_yield(void *from, void *to) "from %p to %p"
|
|
qemu_coroutine_terminate(void *co) "self %p"
|
|
|
|
# qemu-coroutine-lock.c
|
|
qemu_co_queue_next_bh(void) ""
|
|
qemu_co_queue_next(void *nxt) "next %p"
|
|
qemu_co_mutex_lock_entry(void *mutex, void *self) "mutex %p self %p"
|
|
qemu_co_mutex_lock_return(void *mutex, void *self) "mutex %p self %p"
|
|
qemu_co_mutex_unlock_entry(void *mutex, void *self) "mutex %p self %p"
|
|
qemu_co_mutex_unlock_return(void *mutex, void *self) "mutex %p self %p"
|
|
|
|
# hw/escc.c
|
|
escc_put_queue(char channel, int b) "channel %c put: 0x%02x"
|
|
escc_get_queue(char channel, int val) "channel %c get 0x%02x"
|
|
escc_update_irq(int irq) "IRQ = %d"
|
|
escc_update_parameters(char channel, int speed, int parity, int data_bits, int stop_bits) "channel %c: speed=%d parity=%c data=%d stop=%d"
|
|
escc_mem_writeb_ctrl(char channel, uint32_t reg, uint32_t val) "Write channel %c, reg[%d] = %2.2x"
|
|
escc_mem_writeb_data(char channel, uint32_t val) "Write channel %c, ch %d"
|
|
escc_mem_readb_ctrl(char channel, uint32_t reg, uint8_t val) "Read channel %c, reg[%d] = %2.2x"
|
|
escc_mem_readb_data(char channel, uint32_t ret) "Read channel %c, ch %d"
|
|
escc_serial_receive_byte(char channel, int ch) "channel %c put ch %d"
|
|
escc_sunkbd_event_in(int ch) "Untranslated keycode %2.2x"
|
|
escc_sunkbd_event_out(int ch) "Translated keycode %2.2x"
|
|
escc_kbd_command(int val) "Command %d"
|
|
escc_sunmouse_event(int dx, int dy, int buttons_state) "dx=%d dy=%d buttons=%01x"
|
|
|
|
# block/iscsi.c
|
|
iscsi_aio_write10_cb(void *iscsi, int status, void *acb, int canceled) "iscsi %p status %d acb %p canceled %d"
|
|
iscsi_aio_writev(void *iscsi, int64_t sector_num, int nb_sectors, void *opaque, void *acb) "iscsi %p sector_num %"PRId64" nb_sectors %d opaque %p acb %p"
|
|
iscsi_aio_read10_cb(void *iscsi, int status, void *acb, int canceled) "iscsi %p status %d acb %p canceled %d"
|
|
iscsi_aio_readv(void *iscsi, int64_t sector_num, int nb_sectors, void *opaque, void *acb) "iscsi %p sector_num %"PRId64" nb_sectors %d opaque %p acb %p"
|
|
|
|
# hw/esp.c
|
|
esp_raise_irq(void) "Raise IRQ"
|
|
esp_lower_irq(void) "Lower IRQ"
|
|
esp_dma_enable(void) "Raise enable"
|
|
esp_dma_disable(void) "Lower enable"
|
|
esp_get_cmd(uint32_t dmalen, int target) "len %d target %d"
|
|
esp_do_busid_cmd(uint8_t busid) "busid 0x%x"
|
|
esp_handle_satn_stop(uint32_t cmdlen) "cmdlen %d"
|
|
esp_write_response(uint32_t status) "Transfer status (status=%d)"
|
|
esp_do_dma(uint32_t cmdlen, uint32_t len) "command len %d + %d"
|
|
esp_command_complete(void) "SCSI Command complete"
|
|
esp_command_complete_unexpected(void) "SCSI command completed unexpectedly"
|
|
esp_command_complete_fail(void) "Command failed"
|
|
esp_transfer_data(uint32_t dma_left, int32_t ti_size) "transfer %d/%d"
|
|
esp_handle_ti(uint32_t minlen) "Transfer Information len %d"
|
|
esp_handle_ti_cmd(uint32_t cmdlen) "command len %d"
|
|
esp_mem_readb(uint32_t saddr, uint8_t reg) "reg[%d]: 0x%2.2x"
|
|
esp_mem_writeb(uint32_t saddr, uint8_t reg, uint32_t val) "reg[%d]: 0x%2.2x -> 0x%2.2x"
|
|
esp_mem_writeb_cmd_nop(uint32_t val) "NOP (%2.2x)"
|
|
esp_mem_writeb_cmd_flush(uint32_t val) "Flush FIFO (%2.2x)"
|
|
esp_mem_writeb_cmd_reset(uint32_t val) "Chip reset (%2.2x)"
|
|
esp_mem_writeb_cmd_bus_reset(uint32_t val) "Bus reset (%2.2x)"
|
|
esp_mem_writeb_cmd_iccs(uint32_t val) "Initiator Command Complete Sequence (%2.2x)"
|
|
esp_mem_writeb_cmd_msgacc(uint32_t val) "Message Accepted (%2.2x)"
|
|
esp_mem_writeb_cmd_pad(uint32_t val) "Transfer padding (%2.2x)"
|
|
esp_mem_writeb_cmd_satn(uint32_t val) "Set ATN (%2.2x)"
|
|
esp_mem_writeb_cmd_sel(uint32_t val) "Select without ATN (%2.2x)"
|
|
esp_mem_writeb_cmd_selatn(uint32_t val) "Select with ATN (%2.2x)"
|
|
esp_mem_writeb_cmd_selatns(uint32_t val) "Select with ATN & stop (%2.2x)"
|
|
esp_mem_writeb_cmd_ensel(uint32_t val) "Enable selection (%2.2x)"
|
|
|
|
# monitor.c
|
|
handle_qmp_command(void *mon, const char *cmd_name) "mon %p cmd_name \"%s\""
|
|
monitor_protocol_emitter(void *mon) "mon %p"
|
|
|
|
# hw/opencores_eth.c
|
|
open_eth_mii_write(unsigned idx, uint16_t v) "MII[%02x] <- %04x"
|
|
open_eth_mii_read(unsigned idx, uint16_t v) "MII[%02x] -> %04x"
|
|
open_eth_update_irq(uint32_t v) "IRQ <- %x"
|
|
open_eth_receive(unsigned len) "RX: len: %u"
|
|
open_eth_receive_mcast(unsigned idx, uint32_t h0, uint32_t h1) "MCAST: idx = %u, hash: %08x:%08x"
|
|
open_eth_receive_reject(void) "RX: rejected"
|
|
open_eth_receive_desc(uint32_t addr, uint32_t len_flags) "RX: %08x, len_flags: %08x"
|
|
open_eth_start_xmit(uint32_t addr, unsigned len, unsigned tx_len) "TX: %08x, len: %u, tx_len: %u"
|
|
open_eth_reg_read(uint32_t addr, uint32_t v) "MAC[%02x] -> %08x"
|
|
open_eth_reg_write(uint32_t addr, uint32_t v) "MAC[%02x] <- %08x"
|
|
open_eth_desc_read(uint32_t addr, uint32_t v) "DESC[%04x] -> %08x"
|
|
open_eth_desc_write(uint32_t addr, uint32_t v) "DESC[%04x] <- %08x"
|
|
|
|
# hw/9pfs/virtio-9p.c
|
|
v9fs_rerror(uint16_t tag, uint8_t id, int err) "tag %d id %d err %d"
|
|
v9fs_version(uint16_t tag, uint8_t id, int32_t msize, char* version) "tag %d id %d msize %d version %s"
|
|
v9fs_version_return(uint16_t tag, uint8_t id, int32_t msize, char* version) "tag %d id %d msize %d version %s"
|
|
v9fs_attach(uint16_t tag, uint8_t id, int32_t fid, int32_t afid, char* uname, char* aname) "tag %u id %u fid %d afid %d uname %s aname %s"
|
|
v9fs_attach_return(uint16_t tag, uint8_t id, int8_t type, int32_t version, int64_t path) "tag %d id %d type %d version %d path %"PRId64""
|
|
v9fs_stat(uint16_t tag, uint8_t id, int32_t fid) "tag %d id %d fid %d"
|
|
v9fs_stat_return(uint16_t tag, uint8_t id, int32_t mode, int32_t atime, int32_t mtime, int64_t length) "tag %d id %d stat={mode %d atime %d mtime %d length %"PRId64"}"
|
|
v9fs_getattr(uint16_t tag, uint8_t id, int32_t fid, uint64_t request_mask) "tag %d id %d fid %d request_mask %"PRIu64""
|
|
v9fs_getattr_return(uint16_t tag, uint8_t id, uint64_t result_mask, uint32_t mode, uint32_t uid, uint32_t gid) "tag %d id %d getattr={result_mask %"PRId64" mode %u uid %u gid %u}"
|
|
v9fs_walk(uint16_t tag, uint8_t id, int32_t fid, int32_t newfid, uint16_t nwnames) "tag %d id %d fid %d newfid %d nwnames %d"
|
|
v9fs_walk_return(uint16_t tag, uint8_t id, uint16_t nwnames, void* qids) "tag %d id %d nwnames %d qids %p"
|
|
v9fs_open(uint16_t tag, uint8_t id, int32_t fid, int32_t mode) "tag %d id %d fid %d mode %d"
|
|
v9fs_open_return(uint16_t tag, uint8_t id, int8_t type, int32_t version, int64_t path, int iounit) "tag %d id %d qid={type %d version %d path %"PRId64"} iounit %d"
|
|
v9fs_lcreate(uint16_t tag, uint8_t id, int32_t dfid, int32_t flags, int32_t mode, uint32_t gid) "tag %d id %d dfid %d flags %d mode %d gid %u"
|
|
v9fs_lcreate_return(uint16_t tag, uint8_t id, int8_t type, int32_t version, int64_t path, int32_t iounit) "tag %d id %d qid={type %d version %d path %"PRId64"} iounit %d"
|
|
v9fs_fsync(uint16_t tag, uint8_t id, int32_t fid, int datasync) "tag %d id %d fid %d datasync %d"
|
|
v9fs_clunk(uint16_t tag, uint8_t id, int32_t fid) "tag %d id %d fid %d"
|
|
v9fs_read(uint16_t tag, uint8_t id, int32_t fid, uint64_t off, uint32_t max_count) "tag %d id %d fid %d off %"PRIu64" max_count %u"
|
|
v9fs_read_return(uint16_t tag, uint8_t id, int32_t count, ssize_t err) "tag %d id %d count %d err %zd"
|
|
v9fs_readdir(uint16_t tag, uint8_t id, int32_t fid, uint64_t offset, uint32_t max_count) "tag %d id %d fid %d offset %"PRIu64" max_count %u"
|
|
v9fs_readdir_return(uint16_t tag, uint8_t id, uint32_t count, ssize_t retval) "tag %d id %d count %u retval %zd"
|
|
v9fs_write(uint16_t tag, uint8_t id, int32_t fid, uint64_t off, uint32_t count, int cnt) "tag %d id %d fid %d off %"PRIu64" count %u cnt %d"
|
|
v9fs_write_return(uint16_t tag, uint8_t id, int32_t total, ssize_t err) "tag %d id %d total %d err %zd"
|
|
v9fs_create(uint16_t tag, uint8_t id, int32_t fid, char* name, int32_t perm, int8_t mode) "tag %d id %d fid %d name %s perm %d mode %d"
|
|
v9fs_create_return(uint16_t tag, uint8_t id, int8_t type, int32_t version, int64_t path, int iounit) "tag %d id %d qid={type %d version %d path %"PRId64"} iounit %d"
|
|
v9fs_symlink(uint16_t tag, uint8_t id, int32_t fid, char* name, char* symname, uint32_t gid) "tag %d id %d fid %d name %s symname %s gid %u"
|
|
v9fs_symlink_return(uint16_t tag, uint8_t id, int8_t type, int32_t version, int64_t path) "tag %d id %d qid={type %d version %d path %"PRId64"}"
|
|
v9fs_flush(uint16_t tag, uint8_t id, int16_t flush_tag) "tag %d id %d flush_tag %d"
|
|
v9fs_link(uint16_t tag, uint8_t id, int32_t dfid, int32_t oldfid, char* name) "tag %d id %d dfid %d oldfid %d name %s"
|
|
v9fs_remove(uint16_t tag, uint8_t id, int32_t fid) "tag %d id %d fid %d"
|
|
v9fs_wstat(uint16_t tag, uint8_t id, int32_t fid, int32_t mode, int32_t atime, int32_t mtime) "tag %u id %u fid %d stat={mode %d atime %d mtime %d}"
|
|
v9fs_mknod(uint16_t tag, uint8_t id, int32_t fid, int mode, int major, int minor) "tag %d id %d fid %d mode %d major %d minor %d"
|
|
v9fs_mknod_return(uint16_t tag, uint8_t id, int8_t type, int32_t version, int64_t path) "tag %d id %d qid={type %d version %d path %"PRId64"}"
|
|
v9fs_lock(uint16_t tag, uint8_t id, int32_t fid, uint8_t type, uint64_t start, uint64_t length) "tag %d id %d fid %d type %d start %"PRIu64" length %"PRIu64""
|
|
v9fs_lock_return(uint16_t tag, uint8_t id, int8_t status) "tag %d id %d status %d"
|
|
v9fs_getlock(uint16_t tag, uint8_t id, int32_t fid, uint8_t type, uint64_t start, uint64_t length)"tag %d id %d fid %d type %d start %"PRIu64" length %"PRIu64""
|
|
v9fs_getlock_return(uint16_t tag, uint8_t id, uint8_t type, uint64_t start, uint64_t length, uint32_t proc_id) "tag %d id %d type %d start %"PRIu64" length %"PRIu64" proc_id %u"
|
|
v9fs_mkdir(uint16_t tag, uint8_t id, int32_t fid, char* name, int mode, uint32_t gid) "tag %u id %u fid %d name %s mode %d gid %u"
|
|
v9fs_mkdir_return(uint16_t tag, uint8_t id, int8_t type, int32_t version, int64_t path, int err) "tag %u id %u qid={type %d version %d path %"PRId64"} err %d"
|
|
v9fs_xattrwalk(uint16_t tag, uint8_t id, int32_t fid, int32_t newfid, char* name) "tag %d id %d fid %d newfid %d name %s"
|
|
v9fs_xattrwalk_return(uint16_t tag, uint8_t id, int64_t size) "tag %d id %d size %"PRId64""
|
|
v9fs_xattrcreate(uint16_t tag, uint8_t id, int32_t fid, char* name, int64_t size, int flags) "tag %d id %d fid %d name %s size %"PRId64" flags %d"
|
|
v9fs_readlink(uint16_t tag, uint8_t id, int32_t fid) "tag %d id %d fid %d"
|
|
v9fs_readlink_return(uint16_t tag, uint8_t id, char* target) "tag %d id %d name %s"
|
|
|
|
# target-sparc/mmu_helper.c
|
|
mmu_helper_dfault(uint64_t address, uint64_t context, int mmu_idx, uint32_t tl) "DFAULT at %"PRIx64" context %"PRIx64" mmu_idx=%d tl=%d"
|
|
mmu_helper_dprot(uint64_t address, uint64_t context, int mmu_idx, uint32_t tl) "DPROT at %"PRIx64" context %"PRIx64" mmu_idx=%d tl=%d"
|
|
mmu_helper_dmiss(uint64_t address, uint64_t context) "DMISS at %"PRIx64" context %"PRIx64""
|
|
mmu_helper_tfault(uint64_t address, uint64_t context) "TFAULT at %"PRIx64" context %"PRIx64""
|
|
mmu_helper_tmiss(uint64_t address, uint64_t context) "TMISS at %"PRIx64" context %"PRIx64""
|
|
mmu_helper_get_phys_addr_code(uint32_t tl, int mmu_idx, uint64_t prim_context, uint64_t sec_context, uint64_t address) "tl=%d mmu_idx=%d primary context=%"PRIx64" secondary context=%"PRIx64" address=%"PRIx64""
|
|
mmu_helper_get_phys_addr_data(uint32_t tl, int mmu_idx, uint64_t prim_context, uint64_t sec_context, uint64_t address) "tl=%d mmu_idx=%d primary context=%"PRIx64" secondary context=%"PRIx64" address=%"PRIx64""
|
|
mmu_helper_mmu_fault(uint64_t address, uint64_t paddr, int mmu_idx, uint32_t tl, uint64_t prim_context, uint64_t sec_context) "Translate at %"PRIx64" -> %"PRIx64", mmu_idx=%d tl=%d primary context=%"PRIx64" secondary context=%"PRIx64""
|
|
|
|
# target-sparc/int_helper.c
|
|
int_helper_set_softint(uint32_t softint) "new %08x"
|
|
int_helper_clear_softint(uint32_t softint) "new %08x"
|
|
int_helper_write_softint(uint32_t softint) "new %08x"
|
|
int_helper_icache_freeze(void) "Instruction cache: freeze"
|
|
int_helper_dcache_freeze(void) "Data cache: freeze"
|
|
|
|
# target-sparc/win_helper.c
|
|
win_helper_gregset_error(uint32_t pstate) "ERROR in get_gregset: active pstate bits=%x"
|
|
win_helper_switch_pstate(uint32_t pstate_regs, uint32_t new_pstate_regs) "change_pstate: switching regs old=%x new=%x"
|
|
win_helper_no_switch_pstate(uint32_t new_pstate_regs) "change_pstate: regs new=%x (unchanged)"
|
|
win_helper_wrpil(uint32_t psrpil, uint32_t new_pil) "old=%x new=%x"
|
|
win_helper_done(uint32_t tl) "tl=%d"
|
|
win_helper_retry(uint32_t tl) "tl=%d"
|
|
|
|
# dma-helpers.c
|
|
dma_bdrv_io(void *dbs, void *bs, int64_t sector_num, bool to_dev) "dbs=%p bs=%p sector_num=%" PRId64 " to_dev=%d"
|
|
dma_aio_cancel(void *dbs) "dbs=%p"
|
|
dma_complete(void *dbs, int ret, void *cb) "dbs=%p ret=%d cb=%p"
|
|
dma_bdrv_cb(void *dbs, int ret) "dbs=%p ret=%d"
|
|
dma_map_wait(void *dbs) "dbs=%p"
|
|
|
|
# console.h
|
|
displaysurface_free(void *display_state, void *display_surface) "state=%p surface=%p"
|
|
displaysurface_resize(void *display_state, void *display_surface, int width, int height) "state=%p surface=%p %dx%d"
|
|
|
|
# vga.c
|
|
ppm_save(const char *filename, void *display_surface) "%s surface=%p"
|
|
|
|
# hw/qxl.c
|
|
disable qxl_interface_set_mm_time(int qid, uint32_t mm_time) "%d %d"
|
|
disable qxl_io_write_vga(int qid, const char *mode, uint32_t addr, uint32_t val) "%d %s addr=%u val=%u"
|
|
qxl_create_guest_primary(int qid, uint32_t width, uint32_t height, uint64_t mem, uint32_t format, uint32_t position) "%d %ux%u mem=%" PRIx64 " %u,%u"
|
|
qxl_create_guest_primary_rest(int qid, int32_t stride, uint32_t type, uint32_t flags) "%d %d,%d,%d"
|
|
qxl_destroy_primary(int qid) "%d"
|
|
qxl_enter_vga_mode(int qid) "%d"
|
|
qxl_exit_vga_mode(int qid) "%d"
|
|
qxl_hard_reset(int qid, int64_t loadvm) "%d loadvm=%"PRId64""
|
|
qxl_interface_async_complete_io(int qid, uint32_t current_async, void *cookie) "%d current=%d cookie=%p"
|
|
qxl_interface_attach_worker(int qid) "%d"
|
|
qxl_interface_get_init_info(int qid) "%d"
|
|
qxl_interface_set_compression_level(int qid, int64_t level) "%d %"PRId64
|
|
qxl_interface_update_area_complete(int qid, uint32_t surface_id, uint32_t dirty_left, uint32_t dirty_right, uint32_t dirty_top, uint32_t dirty_bottom) "%d surface=%d [%d,%d,%d,%d]"
|
|
qxl_interface_update_area_complete_rest(int qid, uint32_t num_updated_rects) "%d #=%d"
|
|
qxl_interface_update_area_complete_overflow(int qid, int max) "%d max=%d"
|
|
qxl_interface_update_area_complete_schedule_bh(int qid, uint32_t num_dirty) "%d #dirty=%d"
|
|
qxl_io_destroy_primary_ignored(int qid, const char *mode) "%d %s"
|
|
qxl_io_read_unexpected(int qid) "%d"
|
|
qxl_io_unexpected_vga_mode(int qid, uint32_t io_port, const char *desc) "%d 0x%x (%s)"
|
|
qxl_io_write(int qid, const char *mode, uint64_t addr, uint64_t val, unsigned size, int async) "%d %s addr=%"PRIu64 " val=%"PRIu64" size=%u async=%d"
|
|
qxl_memslot_add_guest(int qid, uint32_t slot_id, uint64_t guest_start, uint64_t guest_end) "%d %u: guest phys 0x%"PRIx64 " - 0x%" PRIx64
|
|
qxl_post_load(int qid, const char *mode) "%d %s"
|
|
qxl_pre_load(int qid) "%d"
|
|
qxl_pre_save(int qid) "%d"
|
|
qxl_reset_surfaces(int qid) "%d"
|
|
qxl_ring_command_check(int qid, const char *mode) "%d %s"
|
|
qxl_ring_command_get(int qid, const char *mode) "%d %s"
|
|
qxl_ring_command_req_notification(int qid) "%d"
|
|
qxl_ring_cursor_check(int qid, const char *mode) "%d %s"
|
|
qxl_ring_cursor_get(int qid, const char *mode) "%d %s"
|
|
qxl_ring_cursor_req_notification(int qid) "%d"
|
|
qxl_ring_res_push(int qid, const char *mode, uint32_t surface_count, uint32_t free_res, void *last_release, const char *notify) "%d %s s#=%d res#=%d last=%p notify=%s"
|
|
qxl_ring_res_push_rest(int qid, uint32_t ring_has, uint32_t ring_size, uint32_t prod, uint32_t cons) "%d ring %d/%d [%d,%d]"
|
|
qxl_ring_res_put(int qid, uint32_t free_res) "%d #res=%d"
|
|
qxl_set_mode(int qid, int modenr, uint32_t x_res, uint32_t y_res, uint32_t bits, uint64_t devmem) "%d mode=%d [ x=%d y=%d @ bpp=%d devmem=0x%" PRIx64 " ]"
|
|
qxl_soft_reset(int qid) "%d"
|
|
qemu_spice_add_memslot(int qid, uint32_t slot_id, unsigned long virt_start, unsigned long virt_end, int async) "%d %u: host virt 0x%lx - 0x%lx async=%d"
|
|
qemu_spice_del_memslot(int qid, uint32_t gid, uint32_t slot_id) "%d gid=%u sid=%u"
|
|
qemu_spice_create_primary_surface(int qid, uint32_t sid, void *surface, int async) "%d sid=%u surface=%p async=%d"
|
|
qemu_spice_destroy_primary_surface(int qid, uint32_t sid, int async) "%d sid=%u async=%d"
|
|
qemu_spice_wakeup(uint32_t qid) "%d"
|
|
qemu_spice_start(uint32_t qid) "%d"
|
|
qemu_spice_stop(uint32_t qid) "%d"
|
|
qemu_spice_create_update(uint32_t left, uint32_t right, uint32_t top, uint32_t bottom) "lr %d -> %d, tb -> %d -> %d"
|
|
qxl_spice_destroy_surfaces_complete(int qid) "%d"
|
|
qxl_spice_destroy_surfaces(int qid, int async) "%d async=%d"
|
|
qxl_spice_destroy_surface_wait_complete(int qid, uint32_t id) "%d sid=%d"
|
|
qxl_spice_destroy_surface_wait(int qid, uint32_t id, int async) "%d sid=%d async=%d"
|
|
qxl_spice_flush_surfaces_async(int qid, uint32_t surface_count, uint32_t num_free_res) "%d s#=%d, res#=%d"
|
|
qxl_spice_loadvm_commands(int qid, void *ext, uint32_t count) "%d ext=%p count=%d"
|
|
qxl_spice_oom(int qid) "%d"
|
|
qxl_spice_reset_cursor(int qid) "%d"
|
|
qxl_spice_reset_image_cache(int qid) "%d"
|
|
qxl_spice_reset_memslots(int qid) "%d"
|
|
qxl_spice_update_area(int qid, uint32_t surface_id, uint32_t left, uint32_t right, uint32_t top, uint32_t bottom) "%d sid=%d [%d,%d,%d,%d]"
|
|
qxl_spice_update_area_rest(int qid, uint32_t num_dirty_rects, uint32_t clear_dirty_region) "%d #d=%d clear=%d"
|
|
qxl_surfaces_dirty(int qid, int surface, int offset, int size) "%d surface=%d offset=%d size=%d"
|
|
qxl_vga_ioport_while_not_in_vga_mode(int qid) "%d (int qid, reset to VGA mode because of VGA io)"
|
|
|
|
# hw/qxl-render.c
|
|
qxl_render_blit_guest_primary_initialized(void) ""
|
|
qxl_render_blit(int32_t stride, int32_t left, int32_t right, int32_t top, int32_t bottom) "stride=%d [%d, %d, %d, %d]"
|
|
qxl_render_guest_primary_resized(int32_t width, int32_t height, int32_t stride, int32_t bytes_pp, int32_t bits_pp) "%dx%d, stride %d, bpp %d, depth %d"
|
|
qxl_render_update_area_done(void *cookie) "%p"
|