xemu-project/xemu
1
0
Fork 0
mirror of https://github.com/xemu-project/xemu.git synced 2024-11-23 19:49:43 +00:00
Code Issues Actions Packages Projects Releases Wiki Activity
9f17bfdab4
xemu/hw/arm/aspeed.c
Peter Maydell 761c532ab1 target/arm: Make boards pass base address to armv7m_load_kernel() 
Currently armv7m_load_kernel() takes the size of the block of memory
where it should load the initial guest image, but assumes that it
should always load it at address 0.  This happens to be true of all
our M-profile boards at the moment, but it isn't guaranteed to always
be so: M-profile CPUs can be configured (via init-svtor and
init-nsvtor, which match equivalent hardware configuration signals)
to have the initial vector table at any address, not just zero.  (For
instance the Teeny board has the boot ROM at address 0x0200_0000.)

Add a base address argument to armv7m_load_kernel(), so that
callers now pass in both base address and size. All the current
callers pass 0, so this is not a behaviour change.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20220823160417.3858216-3-peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2022-09-14 11:19:40 +01:00

1594 lines
61 KiB
C
Raw Blame History

/*
* OpenPOWER Palmetto BMC
*
* Andrew Jeffery <andrew@aj.id.au>
*
* Copyright 2016 IBM Corp.
*
* This code is licensed under the GPL version 2 or later. See
* the COPYING file in the top-level directory.
*/
#include "qemu/osdep.h"
#include "qapi/error.h"
#include "hw/arm/boot.h"
#include "hw/arm/aspeed.h"
#include "hw/arm/aspeed_soc.h"
#include "hw/i2c/i2c_mux_pca954x.h"
#include "hw/i2c/smbus_eeprom.h"
#include "hw/misc/pca9552.h"
#include "hw/sensor/tmp105.h"
#include "hw/misc/led.h"
#include "hw/qdev-properties.h"
#include "sysemu/block-backend.h"
#include "sysemu/reset.h"
#include "hw/loader.h"
#include "qemu/error-report.h"
#include "qemu/units.h"
#include "hw/qdev-clock.h"
#include "sysemu/sysemu.h"
static struct arm_boot_info aspeed_board_binfo = {
.board_id = -1, /* device-tree-only board */
};
struct AspeedMachineState {
/* Private */
MachineState parent_obj;
/* Public */
AspeedSoCState soc;
bool mmio_exec;
char *fmc_model;
char *spi_model;
};
/* Palmetto hardware value: 0x120CE416 */
#define PALMETTO_BMC_HW_STRAP1 ( \
SCU_AST2400_HW_STRAP_DRAM_SIZE(DRAM_SIZE_256MB) | \
SCU_AST2400_HW_STRAP_DRAM_CONFIG(2 /* DDR3 with CL=6, CWL=5 */) | \
SCU_AST2400_HW_STRAP_ACPI_DIS | \
SCU_AST2400_HW_STRAP_SET_CLK_SOURCE(AST2400_CLK_48M_IN) | \
SCU_HW_STRAP_VGA_CLASS_CODE | \
SCU_HW_STRAP_LPC_RESET_PIN | \
SCU_HW_STRAP_SPI_MODE(SCU_HW_STRAP_SPI_M_S_EN) | \
SCU_AST2400_HW_STRAP_SET_CPU_AHB_RATIO(AST2400_CPU_AHB_RATIO_2_1) | \
SCU_HW_STRAP_SPI_WIDTH | \
SCU_HW_STRAP_VGA_SIZE_SET(VGA_16M_DRAM) | \
SCU_AST2400_HW_STRAP_BOOT_MODE(AST2400_SPI_BOOT))
/* TODO: Find the actual hardware value */
#define SUPERMICROX11_BMC_HW_STRAP1 ( \
SCU_AST2400_HW_STRAP_DRAM_SIZE(DRAM_SIZE_128MB) | \
SCU_AST2400_HW_STRAP_DRAM_CONFIG(2) | \
SCU_AST2400_HW_STRAP_ACPI_DIS | \
SCU_AST2400_HW_STRAP_SET_CLK_SOURCE(AST2400_CLK_48M_IN) | \
SCU_HW_STRAP_VGA_CLASS_CODE | \
SCU_HW_STRAP_LPC_RESET_PIN | \
SCU_HW_STRAP_SPI_MODE(SCU_HW_STRAP_SPI_M_S_EN) | \
SCU_AST2400_HW_STRAP_SET_CPU_AHB_RATIO(AST2400_CPU_AHB_RATIO_2_1) | \
SCU_HW_STRAP_SPI_WIDTH | \
SCU_HW_STRAP_VGA_SIZE_SET(VGA_16M_DRAM) | \
SCU_AST2400_HW_STRAP_BOOT_MODE(AST2400_SPI_BOOT))
/* AST2500 evb hardware value: 0xF100C2E6 */
#define AST2500_EVB_HW_STRAP1 (( \
AST2500_HW_STRAP1_DEFAULTS | \
SCU_AST2500_HW_STRAP_SPI_AUTOFETCH_ENABLE | \
SCU_AST2500_HW_STRAP_GPIO_STRAP_ENABLE | \
SCU_AST2500_HW_STRAP_UART_DEBUG | \
SCU_AST2500_HW_STRAP_DDR4_ENABLE | \
SCU_HW_STRAP_MAC1_RGMII | \
SCU_HW_STRAP_MAC0_RGMII) & \
~SCU_HW_STRAP_2ND_BOOT_WDT)
/* Romulus hardware value: 0xF10AD206 */
#define ROMULUS_BMC_HW_STRAP1 ( \
AST2500_HW_STRAP1_DEFAULTS | \
SCU_AST2500_HW_STRAP_SPI_AUTOFETCH_ENABLE | \
SCU_AST2500_HW_STRAP_GPIO_STRAP_ENABLE | \
SCU_AST2500_HW_STRAP_UART_DEBUG | \
SCU_AST2500_HW_STRAP_DDR4_ENABLE | \
SCU_AST2500_HW_STRAP_ACPI_ENABLE | \
SCU_HW_STRAP_SPI_MODE(SCU_HW_STRAP_SPI_MASTER))
/* Sonorapass hardware value: 0xF100D216 */
#define SONORAPASS_BMC_HW_STRAP1 ( \
SCU_AST2500_HW_STRAP_SPI_AUTOFETCH_ENABLE | \
SCU_AST2500_HW_STRAP_GPIO_STRAP_ENABLE | \
SCU_AST2500_HW_STRAP_UART_DEBUG | \
SCU_AST2500_HW_STRAP_RESERVED28 | \
SCU_AST2500_HW_STRAP_DDR4_ENABLE | \
SCU_HW_STRAP_VGA_CLASS_CODE | \
SCU_HW_STRAP_LPC_RESET_PIN | \
SCU_HW_STRAP_SPI_MODE(SCU_HW_STRAP_SPI_MASTER) | \
SCU_AST2500_HW_STRAP_SET_AXI_AHB_RATIO(AXI_AHB_RATIO_2_1) | \
SCU_HW_STRAP_VGA_BIOS_ROM | \
SCU_HW_STRAP_VGA_SIZE_SET(VGA_16M_DRAM) | \
SCU_AST2500_HW_STRAP_RESERVED1)
#define G220A_BMC_HW_STRAP1 ( \
SCU_AST2500_HW_STRAP_SPI_AUTOFETCH_ENABLE | \
SCU_AST2500_HW_STRAP_GPIO_STRAP_ENABLE | \
SCU_AST2500_HW_STRAP_UART_DEBUG | \
SCU_AST2500_HW_STRAP_RESERVED28 | \
SCU_AST2500_HW_STRAP_DDR4_ENABLE | \
SCU_HW_STRAP_2ND_BOOT_WDT | \
SCU_HW_STRAP_VGA_CLASS_CODE | \
SCU_HW_STRAP_LPC_RESET_PIN | \
SCU_HW_STRAP_SPI_MODE(SCU_HW_STRAP_SPI_MASTER) | \
SCU_AST2500_HW_STRAP_SET_AXI_AHB_RATIO(AXI_AHB_RATIO_2_1) | \
SCU_HW_STRAP_VGA_SIZE_SET(VGA_64M_DRAM) | \
SCU_AST2500_HW_STRAP_RESERVED1)
/* FP5280G2 hardware value: 0XF100D286 */
#define FP5280G2_BMC_HW_STRAP1 ( \
SCU_AST2500_HW_STRAP_SPI_AUTOFETCH_ENABLE | \
SCU_AST2500_HW_STRAP_GPIO_STRAP_ENABLE | \
SCU_AST2500_HW_STRAP_UART_DEBUG | \
SCU_AST2500_HW_STRAP_RESERVED28 | \
SCU_AST2500_HW_STRAP_DDR4_ENABLE | \
SCU_HW_STRAP_VGA_CLASS_CODE | \
SCU_HW_STRAP_LPC_RESET_PIN | \
SCU_HW_STRAP_SPI_MODE(SCU_HW_STRAP_SPI_MASTER) | \
SCU_AST2500_HW_STRAP_SET_AXI_AHB_RATIO(AXI_AHB_RATIO_2_1) | \
SCU_HW_STRAP_MAC1_RGMII | \
SCU_HW_STRAP_VGA_SIZE_SET(VGA_16M_DRAM) | \
SCU_AST2500_HW_STRAP_RESERVED1)
/* Witherspoon hardware value: 0xF10AD216 (but use romulus definition) */
#define WITHERSPOON_BMC_HW_STRAP1 ROMULUS_BMC_HW_STRAP1
/* Quanta-Q71l hardware value */
#define QUANTA_Q71L_BMC_HW_STRAP1 ( \
SCU_AST2400_HW_STRAP_DRAM_SIZE(DRAM_SIZE_128MB) | \
SCU_AST2400_HW_STRAP_DRAM_CONFIG(2/* DDR3 with CL=6, CWL=5 */) | \
SCU_AST2400_HW_STRAP_ACPI_DIS | \
SCU_AST2400_HW_STRAP_SET_CLK_SOURCE(AST2400_CLK_24M_IN) | \
SCU_HW_STRAP_VGA_CLASS_CODE | \
SCU_HW_STRAP_SPI_MODE(SCU_HW_STRAP_SPI_PASS_THROUGH) | \
SCU_AST2400_HW_STRAP_SET_CPU_AHB_RATIO(AST2400_CPU_AHB_RATIO_2_1) | \
SCU_HW_STRAP_SPI_WIDTH | \
SCU_HW_STRAP_VGA_SIZE_SET(VGA_8M_DRAM) | \
SCU_AST2400_HW_STRAP_BOOT_MODE(AST2400_SPI_BOOT))
/* AST2600 evb hardware value */
#define AST2600_EVB_HW_STRAP1 0x000000C0
#define AST2600_EVB_HW_STRAP2 0x00000003
/* Tacoma hardware value */
#define TACOMA_BMC_HW_STRAP1 0x00000000
#define TACOMA_BMC_HW_STRAP2 0x00000040
/* Rainier hardware value: (QEMU prototype) */
#define RAINIER_BMC_HW_STRAP1 0x00422016
#define RAINIER_BMC_HW_STRAP2 0x80000848
/* Fuji hardware value */
#define FUJI_BMC_HW_STRAP1 0x00000000
#define FUJI_BMC_HW_STRAP2 0x00000000
/* Bletchley hardware value */
/* TODO: Leave same as EVB for now. */
#define BLETCHLEY_BMC_HW_STRAP1 AST2600_EVB_HW_STRAP1
#define BLETCHLEY_BMC_HW_STRAP2 AST2600_EVB_HW_STRAP2
/* Qualcomm DC-SCM hardware value */
#define QCOM_DC_SCM_V1_BMC_HW_STRAP1 0x00000000
#define QCOM_DC_SCM_V1_BMC_HW_STRAP2 0x00000041
#define AST_SMP_MAILBOX_BASE 0x1e6e2180
#define AST_SMP_MBOX_FIELD_ENTRY (AST_SMP_MAILBOX_BASE + 0x0)
#define AST_SMP_MBOX_FIELD_GOSIGN (AST_SMP_MAILBOX_BASE + 0x4)
#define AST_SMP_MBOX_FIELD_READY (AST_SMP_MAILBOX_BASE + 0x8)
#define AST_SMP_MBOX_FIELD_POLLINSN (AST_SMP_MAILBOX_BASE + 0xc)
#define AST_SMP_MBOX_CODE (AST_SMP_MAILBOX_BASE + 0x10)
#define AST_SMP_MBOX_GOSIGN 0xabbaab00
static void aspeed_write_smpboot(ARMCPU *cpu,
const struct arm_boot_info *info)
{
static const uint32_t poll_mailbox_ready[] = {
/*
* r2 = per-cpu go sign value
* r1 = AST_SMP_MBOX_FIELD_ENTRY
* r0 = AST_SMP_MBOX_FIELD_GOSIGN
*/
0xee100fb0, /* mrc p15, 0, r0, c0, c0, 5 */
0xe21000ff, /* ands r0, r0, #255 */
0xe59f201c, /* ldr r2, [pc, #28] */
0xe1822000, /* orr r2, r2, r0 */
0xe59f1018, /* ldr r1, [pc, #24] */
0xe59f0018, /* ldr r0, [pc, #24] */
0xe320f002, /* wfe */
0xe5904000, /* ldr r4, [r0] */
0xe1520004, /* cmp r2, r4 */
0x1afffffb, /* bne <wfe> */
0xe591f000, /* ldr pc, [r1] */
AST_SMP_MBOX_GOSIGN,
AST_SMP_MBOX_FIELD_ENTRY,
AST_SMP_MBOX_FIELD_GOSIGN,
};
rom_add_blob_fixed("aspeed.smpboot", poll_mailbox_ready,
sizeof(poll_mailbox_ready),
info->smp_loader_start);
}
static void aspeed_reset_secondary(ARMCPU *cpu,
const struct arm_boot_info *info)
{
AddressSpace *as = arm_boot_address_space(cpu, info);
CPUState *cs = CPU(cpu);
/* info->smp_bootreg_addr */
address_space_stl_notdirty(as, AST_SMP_MBOX_FIELD_GOSIGN, 0,
MEMTXATTRS_UNSPECIFIED, NULL);
cpu_set_pc(cs, info->smp_loader_start);
}
#define FIRMWARE_ADDR 0x0
static void write_boot_rom(DriveInfo *dinfo, hwaddr addr, size_t rom_size,
Error **errp)
{
BlockBackend *blk = blk_by_legacy_dinfo(dinfo);
g_autofree void *storage = NULL;
int64_t size;
/* The block backend size should have already been 'validated' by
* the creation of the m25p80 object.
*/
size = blk_getlength(blk);
if (size <= 0) {
error_setg(errp, "failed to get flash size");
return;
}
if (rom_size > size) {
rom_size = size;
}
storage = g_malloc0(rom_size);
if (blk_pread(blk, 0, rom_size, storage, 0) < 0) {
error_setg(errp, "failed to read the initial flash content");
return;
}
rom_add_blob_fixed("aspeed.boot_rom", storage, rom_size, addr);
}
void aspeed_board_init_flashes(AspeedSMCState *s, const char *flashtype,
unsigned int count, int unit0)
{
int i;
if (!flashtype) {
return;
}
for (i = 0; i < count; ++i) {
DriveInfo *dinfo = drive_get(IF_MTD, 0, unit0 + i);
qemu_irq cs_line;
DeviceState *dev;
dev = qdev_new(flashtype);
if (dinfo) {
qdev_prop_set_drive(dev, "drive", blk_by_legacy_dinfo(dinfo));
}
qdev_realize_and_unref(dev, BUS(s->spi), &error_fatal);
cs_line = qdev_get_gpio_in_named(dev, SSI_GPIO_CS, 0);
sysbus_connect_irq(SYS_BUS_DEVICE(s), i + 1, cs_line);
}
}
static void sdhci_attach_drive(SDHCIState *sdhci, DriveInfo *dinfo)
{
DeviceState *card;
if (!dinfo) {
return;
}
card = qdev_new(TYPE_SD_CARD);
qdev_prop_set_drive_err(card, "drive", blk_by_legacy_dinfo(dinfo),
&error_fatal);
qdev_realize_and_unref(card,
qdev_get_child_bus(DEVICE(sdhci), "sd-bus"),
&error_fatal);
}
static void connect_serial_hds_to_uarts(AspeedMachineState *bmc)
{
AspeedMachineClass *amc = ASPEED_MACHINE_GET_CLASS(bmc);
AspeedSoCState *s = &bmc->soc;
AspeedSoCClass *sc = ASPEED_SOC_GET_CLASS(s);
aspeed_soc_uart_set_chr(s, amc->uart_default, serial_hd(0));
for (int i = 1, uart = ASPEED_DEV_UART1; i < sc->uarts_num; i++, uart++) {
if (uart == amc->uart_default) {
continue;
}
aspeed_soc_uart_set_chr(s, uart, serial_hd(i));
}
}
static void aspeed_machine_init(MachineState *machine)
{
AspeedMachineState *bmc = ASPEED_MACHINE(machine);
AspeedMachineClass *amc = ASPEED_MACHINE_GET_CLASS(machine);
AspeedSoCClass *sc;
DriveInfo *drive0 = drive_get(IF_MTD, 0, 0);
int i;
NICInfo *nd = &nd_table[0];
object_initialize_child(OBJECT(machine), "soc", &bmc->soc, amc->soc_name);
sc = ASPEED_SOC_GET_CLASS(&bmc->soc);
/*
* This will error out if the RAM size is not supported by the
* memory controller of the SoC.
*/
object_property_set_uint(OBJECT(&bmc->soc), "ram-size", machine->ram_size,
&error_fatal);
for (i = 0; i < sc->macs_num; i++) {
if ((amc->macs_mask & (1 << i)) && nd->used) {
qemu_check_nic_model(nd, TYPE_FTGMAC100);
qdev_set_nic_properties(DEVICE(&bmc->soc.ftgmac100[i]), nd);
nd++;
}
}
object_property_set_int(OBJECT(&bmc->soc), "hw-strap1", amc->hw_strap1,
&error_abort);
object_property_set_int(OBJECT(&bmc->soc), "hw-strap2", amc->hw_strap2,
&error_abort);
object_property_set_link(OBJECT(&bmc->soc), "memory",
OBJECT(get_system_memory()), &error_abort);
object_property_set_link(OBJECT(&bmc->soc), "dram",
OBJECT(machine->ram), &error_abort);
if (machine->kernel_filename) {
/*
* When booting with a -kernel command line there is no u-boot
* that runs to unlock the SCU. In this case set the default to
* be unlocked as the kernel expects
*/
object_property_set_int(OBJECT(&bmc->soc), "hw-prot-key",
ASPEED_SCU_PROT_KEY, &error_abort);
}
connect_serial_hds_to_uarts(bmc);
qdev_realize(DEVICE(&bmc->soc), NULL, &error_abort);
aspeed_board_init_flashes(&bmc->soc.fmc,
bmc->fmc_model ? bmc->fmc_model : amc->fmc_model,
amc->num_cs, 0);
aspeed_board_init_flashes(&bmc->soc.spi[0],
bmc->spi_model ? bmc->spi_model : amc->spi_model,
1, amc->num_cs);
/* Install first FMC flash content as a boot rom. */
if (drive0) {
AspeedSMCFlash *fl = &bmc->soc.fmc.flashes[0];
MemoryRegion *boot_rom = g_new(MemoryRegion, 1);
uint64_t size = memory_region_size(&fl->mmio);
/*
* create a ROM region using the default mapping window size of
* the flash module. The window size is 64MB for the AST2400
* SoC and 128MB for the AST2500 SoC, which is twice as big as
* needed by the flash modules of the Aspeed machines.
*/
if (ASPEED_MACHINE(machine)->mmio_exec) {
memory_region_init_alias(boot_rom, NULL, "aspeed.boot_rom",
&fl->mmio, 0, size);
memory_region_add_subregion(get_system_memory(), FIRMWARE_ADDR,
boot_rom);
} else {
memory_region_init_rom(boot_rom, NULL, "aspeed.boot_rom",
size, &error_abort);
memory_region_add_subregion(get_system_memory(), FIRMWARE_ADDR,
boot_rom);
write_boot_rom(drive0, FIRMWARE_ADDR, size, &error_abort);
}
}
if (machine->kernel_filename && sc->num_cpus > 1) {
/* With no u-boot we must set up a boot stub for the secondary CPU */
MemoryRegion *smpboot = g_new(MemoryRegion, 1);
memory_region_init_ram(smpboot, NULL, "aspeed.smpboot",
0x80, &error_abort);
memory_region_add_subregion(get_system_memory(),
AST_SMP_MAILBOX_BASE, smpboot);
aspeed_board_binfo.write_secondary_boot = aspeed_write_smpboot;
aspeed_board_binfo.secondary_cpu_reset_hook = aspeed_reset_secondary;
aspeed_board_binfo.smp_loader_start = AST_SMP_MBOX_CODE;
}
aspeed_board_binfo.ram_size = machine->ram_size;
aspeed_board_binfo.loader_start = sc->memmap[ASPEED_DEV_SDRAM];
if (amc->i2c_init) {
amc->i2c_init(bmc);
}
for (i = 0; i < bmc->soc.sdhci.num_slots; i++) {
sdhci_attach_drive(&bmc->soc.sdhci.slots[i],
drive_get(IF_SD, 0, i));
}
if (bmc->soc.emmc.num_slots) {
sdhci_attach_drive(&bmc->soc.emmc.slots[0],
drive_get(IF_SD, 0, bmc->soc.sdhci.num_slots));
}
arm_load_kernel(ARM_CPU(first_cpu), machine, &aspeed_board_binfo);
}
static void at24c_eeprom_init(I2CBus *bus, uint8_t addr, uint32_t rsize)
{
I2CSlave *i2c_dev = i2c_slave_new("at24c-eeprom", addr);
DeviceState *dev = DEVICE(i2c_dev);
qdev_prop_set_uint32(dev, "rom-size", rsize);
i2c_slave_realize_and_unref(i2c_dev, bus, &error_abort);
}
static void palmetto_bmc_i2c_init(AspeedMachineState *bmc)
{
AspeedSoCState *soc = &bmc->soc;
DeviceState *dev;
uint8_t *eeprom_buf = g_malloc0(32 * 1024);
/* The palmetto platform expects a ds3231 RTC but a ds1338 is
* enough to provide basic RTC features. Alarms will be missing */
i2c_slave_create_simple(aspeed_i2c_get_bus(&soc->i2c, 0), "ds1338", 0x68);
smbus_eeprom_init_one(aspeed_i2c_get_bus(&soc->i2c, 0), 0x50,
eeprom_buf);
/* add a TMP423 temperature sensor */
dev = DEVICE(i2c_slave_create_simple(aspeed_i2c_get_bus(&soc->i2c, 2),
"tmp423", 0x4c));
object_property_set_int(OBJECT(dev), "temperature0", 31000, &error_abort);
object_property_set_int(OBJECT(dev), "temperature1", 28000, &error_abort);
object_property_set_int(OBJECT(dev), "temperature2", 20000, &error_abort);
object_property_set_int(OBJECT(dev), "temperature3", 110000, &error_abort);
}
static void quanta_q71l_bmc_i2c_init(AspeedMachineState *bmc)
{
AspeedSoCState *soc = &bmc->soc;
/*
* The quanta-q71l platform expects tmp75s which are compatible with
* tmp105s.
*/
i2c_slave_create_simple(aspeed_i2c_get_bus(&soc->i2c, 1), "tmp105", 0x4c);
i2c_slave_create_simple(aspeed_i2c_get_bus(&soc->i2c, 1), "tmp105", 0x4e);
i2c_slave_create_simple(aspeed_i2c_get_bus(&soc->i2c, 1), "tmp105", 0x4f);
/* TODO: i2c-1: Add baseboard FRU eeprom@54 24c64 */
/* TODO: i2c-1: Add Frontpanel FRU eeprom@57 24c64 */
/* TODO: Add Memory Riser i2c mux and eeproms. */
i2c_slave_create_simple(aspeed_i2c_get_bus(&soc->i2c, 2), "pca9546", 0x74);
i2c_slave_create_simple(aspeed_i2c_get_bus(&soc->i2c, 2), "pca9548", 0x77);
/* TODO: i2c-3: Add BIOS FRU eeprom@56 24c64 */
/* i2c-7 */
i2c_slave_create_simple(aspeed_i2c_get_bus(&soc->i2c, 7), "pca9546", 0x70);
/* - i2c@0: pmbus@59 */
/* - i2c@1: pmbus@58 */
/* - i2c@2: pmbus@58 */
/* - i2c@3: pmbus@59 */
/* TODO: i2c-7: Add PDB FRU eeprom@52 */
/* TODO: i2c-8: Add BMC FRU eeprom@50 */
}
static void ast2500_evb_i2c_init(AspeedMachineState *bmc)
{
AspeedSoCState *soc = &bmc->soc;
uint8_t *eeprom_buf = g_malloc0(8 * 1024);
smbus_eeprom_init_one(aspeed_i2c_get_bus(&soc->i2c, 3), 0x50,
eeprom_buf);
/* The AST2500 EVB expects a LM75 but a TMP105 is compatible */
i2c_slave_create_simple(aspeed_i2c_get_bus(&soc->i2c, 7),
TYPE_TMP105, 0x4d);
}
static void ast2600_evb_i2c_init(AspeedMachineState *bmc)
{
AspeedSoCState *soc = &bmc->soc;
uint8_t *eeprom_buf = g_malloc0(8 * 1024);
smbus_eeprom_init_one(aspeed_i2c_get_bus(&soc->i2c, 7), 0x50,
eeprom_buf);
/* LM75 is compatible with TMP105 driver */
i2c_slave_create_simple(aspeed_i2c_get_bus(&soc->i2c, 8),
TYPE_TMP105, 0x4d);
}
static void romulus_bmc_i2c_init(AspeedMachineState *bmc)
{
AspeedSoCState *soc = &bmc->soc;
/* The romulus board expects Epson RX8900 I2C RTC but a ds1338 is
* good enough */
i2c_slave_create_simple(aspeed_i2c_get_bus(&soc->i2c, 11), "ds1338", 0x32);
}
static void create_pca9552(AspeedSoCState *soc, int bus_id, int addr)
{
i2c_slave_create_simple(aspeed_i2c_get_bus(&soc->i2c, bus_id),
TYPE_PCA9552, addr);
}
static void sonorapass_bmc_i2c_init(AspeedMachineState *bmc)
{
AspeedSoCState *soc = &bmc->soc;
/* bus 2 : */
i2c_slave_create_simple(aspeed_i2c_get_bus(&soc->i2c, 2), "tmp105", 0x48);
i2c_slave_create_simple(aspeed_i2c_get_bus(&soc->i2c, 2), "tmp105", 0x49);
/* bus 2 : pca9546 @ 0x73 */
/* bus 3 : pca9548 @ 0x70 */
/* bus 4 : */
uint8_t *eeprom4_54 = g_malloc0(8 * 1024);
smbus_eeprom_init_one(aspeed_i2c_get_bus(&soc->i2c, 4), 0x54,
eeprom4_54);
/* PCA9539 @ 0x76, but PCA9552 is compatible */
create_pca9552(soc, 4, 0x76);
/* PCA9539 @ 0x77, but PCA9552 is compatible */
create_pca9552(soc, 4, 0x77);
/* bus 6 : */
i2c_slave_create_simple(aspeed_i2c_get_bus(&soc->i2c, 6), "tmp105", 0x48);
i2c_slave_create_simple(aspeed_i2c_get_bus(&soc->i2c, 6), "tmp105", 0x49);
/* bus 6 : pca9546 @ 0x73 */
/* bus 8 : */
uint8_t *eeprom8_56 = g_malloc0(8 * 1024);
smbus_eeprom_init_one(aspeed_i2c_get_bus(&soc->i2c, 8), 0x56,
eeprom8_56);
create_pca9552(soc, 8, 0x60);
create_pca9552(soc, 8, 0x61);
/* bus 8 : adc128d818 @ 0x1d */
/* bus 8 : adc128d818 @ 0x1f */
/*
* bus 13 : pca9548 @ 0x71
* - channel 3:
* - tmm421 @ 0x4c
* - tmp421 @ 0x4e
* - tmp421 @ 0x4f
*/
}
static void witherspoon_bmc_i2c_init(AspeedMachineState *bmc)
{
static const struct {
unsigned gpio_id;
LEDColor color;
const char *description;
bool gpio_polarity;
} pca1_leds[] = {
{13, LED_COLOR_GREEN, "front-fault-4", GPIO_POLARITY_ACTIVE_LOW},
{14, LED_COLOR_GREEN, "front-power-3", GPIO_POLARITY_ACTIVE_LOW},
{15, LED_COLOR_GREEN, "front-id-5", GPIO_POLARITY_ACTIVE_LOW},
};
AspeedSoCState *soc = &bmc->soc;
uint8_t *eeprom_buf = g_malloc0(8 * 1024);
DeviceState *dev;
LEDState *led;
/* Bus 3: TODO bmp280@77 */
dev = DEVICE(i2c_slave_new(TYPE_PCA9552, 0x60));
qdev_prop_set_string(dev, "description", "pca1");
i2c_slave_realize_and_unref(I2C_SLAVE(dev),
aspeed_i2c_get_bus(&soc->i2c, 3),
&error_fatal);
for (size_t i = 0; i < ARRAY_SIZE(pca1_leds); i++) {
led = led_create_simple(OBJECT(bmc),
pca1_leds[i].gpio_polarity,
pca1_leds[i].color,
pca1_leds[i].description);
qdev_connect_gpio_out(dev, pca1_leds[i].gpio_id,
qdev_get_gpio_in(DEVICE(led), 0));
}
i2c_slave_create_simple(aspeed_i2c_get_bus(&soc->i2c, 3), "dps310", 0x76);
i2c_slave_create_simple(aspeed_i2c_get_bus(&soc->i2c, 3), "max31785", 0x52);
i2c_slave_create_simple(aspeed_i2c_get_bus(&soc->i2c, 4), "tmp423", 0x4c);
i2c_slave_create_simple(aspeed_i2c_get_bus(&soc->i2c, 5), "tmp423", 0x4c);
/* The Witherspoon expects a TMP275 but a TMP105 is compatible */
i2c_slave_create_simple(aspeed_i2c_get_bus(&soc->i2c, 9), TYPE_TMP105,
0x4a);
/* The witherspoon board expects Epson RX8900 I2C RTC but a ds1338 is
* good enough */
i2c_slave_create_simple(aspeed_i2c_get_bus(&soc->i2c, 11), "ds1338", 0x32);
smbus_eeprom_init_one(aspeed_i2c_get_bus(&soc->i2c, 11), 0x51,
eeprom_buf);
dev = DEVICE(i2c_slave_new(TYPE_PCA9552, 0x60));
qdev_prop_set_string(dev, "description", "pca0");
i2c_slave_realize_and_unref(I2C_SLAVE(dev),
aspeed_i2c_get_bus(&soc->i2c, 11),
&error_fatal);
/* Bus 11: TODO ucd90160@64 */
}
static void g220a_bmc_i2c_init(AspeedMachineState *bmc)
{
AspeedSoCState *soc = &bmc->soc;
DeviceState *dev;
dev = DEVICE(i2c_slave_create_simple(aspeed_i2c_get_bus(&soc->i2c, 3),
"emc1413", 0x4c));
object_property_set_int(OBJECT(dev), "temperature0", 31000, &error_abort);
object_property_set_int(OBJECT(dev), "temperature1", 28000, &error_abort);
object_property_set_int(OBJECT(dev), "temperature2", 20000, &error_abort);
dev = DEVICE(i2c_slave_create_simple(aspeed_i2c_get_bus(&soc->i2c, 12),
"emc1413", 0x4c));
object_property_set_int(OBJECT(dev), "temperature0", 31000, &error_abort);
object_property_set_int(OBJECT(dev), "temperature1", 28000, &error_abort);
object_property_set_int(OBJECT(dev), "temperature2", 20000, &error_abort);
dev = DEVICE(i2c_slave_create_simple(aspeed_i2c_get_bus(&soc->i2c, 13),
"emc1413", 0x4c));
object_property_set_int(OBJECT(dev), "temperature0", 31000, &error_abort);
object_property_set_int(OBJECT(dev), "temperature1", 28000, &error_abort);
object_property_set_int(OBJECT(dev), "temperature2", 20000, &error_abort);
static uint8_t eeprom_buf[2 * 1024] = {
0x01, 0x00, 0x00, 0x00, 0x01, 0x00, 0x00, 0xfe,
0x01, 0x06, 0x00, 0xc9, 0x42, 0x79, 0x74, 0x65,
0x64, 0x61, 0x6e, 0x63, 0x65, 0xc5, 0x47, 0x32,
0x32, 0x30, 0x41, 0xc4, 0x41, 0x41, 0x42, 0x42,
0xc4, 0x43, 0x43, 0x44, 0x44, 0xc4, 0x45, 0x45,
0x46, 0x46, 0xc4, 0x48, 0x48, 0x47, 0x47, 0xc1,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xa7,
};
smbus_eeprom_init_one(aspeed_i2c_get_bus(&soc->i2c, 4), 0x57,
eeprom_buf);
}
static void aspeed_eeprom_init(I2CBus *bus, uint8_t addr, uint32_t rsize)
{
I2CSlave *i2c_dev = i2c_slave_new("at24c-eeprom", addr);
DeviceState *dev = DEVICE(i2c_dev);
qdev_prop_set_uint32(dev, "rom-size", rsize);
i2c_slave_realize_and_unref(i2c_dev, bus, &error_abort);
}
static void fp5280g2_bmc_i2c_init(AspeedMachineState *bmc)
{
AspeedSoCState *soc = &bmc->soc;
I2CSlave *i2c_mux;
/* The at24c256 */
at24c_eeprom_init(aspeed_i2c_get_bus(&soc->i2c, 1), 0x50, 32768);
/* The fp5280g2 expects a TMP112 but a TMP105 is compatible */
i2c_slave_create_simple(aspeed_i2c_get_bus(&soc->i2c, 2), TYPE_TMP105,
0x48);
i2c_slave_create_simple(aspeed_i2c_get_bus(&soc->i2c, 2), TYPE_TMP105,
0x49);
i2c_mux = i2c_slave_create_simple(aspeed_i2c_get_bus(&soc->i2c, 2),
"pca9546", 0x70);
/* It expects a TMP112 but a TMP105 is compatible */
i2c_slave_create_simple(pca954x_i2c_get_bus(i2c_mux, 0), TYPE_TMP105,
0x4a);
/* It expects a ds3232 but a ds1338 is good enough */
i2c_slave_create_simple(aspeed_i2c_get_bus(&soc->i2c, 4), "ds1338", 0x68);
/* It expects a pca9555 but a pca9552 is compatible */
create_pca9552(soc, 8, 0x30);
}
static void rainier_bmc_i2c_init(AspeedMachineState *bmc)
{
AspeedSoCState *soc = &bmc->soc;
I2CSlave *i2c_mux;
aspeed_eeprom_init(aspeed_i2c_get_bus(&soc->i2c, 0), 0x51, 32 * KiB);
create_pca9552(soc, 3, 0x61);
/* The rainier expects a TMP275 but a TMP105 is compatible */
i2c_slave_create_simple(aspeed_i2c_get_bus(&soc->i2c, 4), TYPE_TMP105,
0x48);
i2c_slave_create_simple(aspeed_i2c_get_bus(&soc->i2c, 4), TYPE_TMP105,
0x49);
i2c_slave_create_simple(aspeed_i2c_get_bus(&soc->i2c, 4), TYPE_TMP105,
0x4a);
i2c_mux = i2c_slave_create_simple(aspeed_i2c_get_bus(&soc->i2c, 4),
"pca9546", 0x70);
aspeed_eeprom_init(pca954x_i2c_get_bus(i2c_mux, 0), 0x50, 64 * KiB);
aspeed_eeprom_init(pca954x_i2c_get_bus(i2c_mux, 1), 0x51, 64 * KiB);
aspeed_eeprom_init(pca954x_i2c_get_bus(i2c_mux, 2), 0x52, 64 * KiB);
create_pca9552(soc, 4, 0x60);
i2c_slave_create_simple(aspeed_i2c_get_bus(&soc->i2c, 5), TYPE_TMP105,
0x48);
i2c_slave_create_simple(aspeed_i2c_get_bus(&soc->i2c, 5), TYPE_TMP105,
0x49);
create_pca9552(soc, 5, 0x60);
create_pca9552(soc, 5, 0x61);
i2c_mux = i2c_slave_create_simple(aspeed_i2c_get_bus(&soc->i2c, 5),
"pca9546", 0x70);
aspeed_eeprom_init(pca954x_i2c_get_bus(i2c_mux, 0), 0x50, 64 * KiB);
aspeed_eeprom_init(pca954x_i2c_get_bus(i2c_mux, 1), 0x51, 64 * KiB);
i2c_slave_create_simple(aspeed_i2c_get_bus(&soc->i2c, 6), TYPE_TMP105,
0x48);
i2c_slave_create_simple(aspeed_i2c_get_bus(&soc->i2c, 6), TYPE_TMP105,
0x4a);
i2c_slave_create_simple(aspeed_i2c_get_bus(&soc->i2c, 6), TYPE_TMP105,
0x4b);
i2c_mux = i2c_slave_create_simple(aspeed_i2c_get_bus(&soc->i2c, 6),
"pca9546", 0x70);
aspeed_eeprom_init(pca954x_i2c_get_bus(i2c_mux, 0), 0x50, 64 * KiB);
aspeed_eeprom_init(pca954x_i2c_get_bus(i2c_mux, 1), 0x51, 64 * KiB);
aspeed_eeprom_init(pca954x_i2c_get_bus(i2c_mux, 2), 0x50, 64 * KiB);
aspeed_eeprom_init(pca954x_i2c_get_bus(i2c_mux, 3), 0x51, 64 * KiB);
create_pca9552(soc, 7, 0x30);
create_pca9552(soc, 7, 0x31);
create_pca9552(soc, 7, 0x32);
create_pca9552(soc, 7, 0x33);
create_pca9552(soc, 7, 0x60);
create_pca9552(soc, 7, 0x61);
i2c_slave_create_simple(aspeed_i2c_get_bus(&soc->i2c, 7), "dps310", 0x76);
/* Bus 7: TODO si7021-a20@20 */
i2c_slave_create_simple(aspeed_i2c_get_bus(&soc->i2c, 7), TYPE_TMP105,
0x48);
i2c_slave_create_simple(aspeed_i2c_get_bus(&soc->i2c, 7), "max31785", 0x52);
aspeed_eeprom_init(aspeed_i2c_get_bus(&soc->i2c, 7), 0x50, 64 * KiB);
aspeed_eeprom_init(aspeed_i2c_get_bus(&soc->i2c, 7), 0x51, 64 * KiB);
i2c_slave_create_simple(aspeed_i2c_get_bus(&soc->i2c, 8), TYPE_TMP105,
0x48);
i2c_slave_create_simple(aspeed_i2c_get_bus(&soc->i2c, 8), TYPE_TMP105,
0x4a);
aspeed_eeprom_init(aspeed_i2c_get_bus(&soc->i2c, 8), 0x50, 64 * KiB);
aspeed_eeprom_init(aspeed_i2c_get_bus(&soc->i2c, 8), 0x51, 64 * KiB);
create_pca9552(soc, 8, 0x60);
create_pca9552(soc, 8, 0x61);
/* Bus 8: ucd90320@11 */
/* Bus 8: ucd90320@b */
/* Bus 8: ucd90320@c */
i2c_slave_create_simple(aspeed_i2c_get_bus(&soc->i2c, 9), "tmp423", 0x4c);
i2c_slave_create_simple(aspeed_i2c_get_bus(&soc->i2c, 9), "tmp423", 0x4d);
aspeed_eeprom_init(aspeed_i2c_get_bus(&soc->i2c, 9), 0x50, 128 * KiB);
i2c_slave_create_simple(aspeed_i2c_get_bus(&soc->i2c, 10), "tmp423", 0x4c);
i2c_slave_create_simple(aspeed_i2c_get_bus(&soc->i2c, 10), "tmp423", 0x4d);
aspeed_eeprom_init(aspeed_i2c_get_bus(&soc->i2c, 10), 0x50, 128 * KiB);
i2c_slave_create_simple(aspeed_i2c_get_bus(&soc->i2c, 11), TYPE_TMP105,
0x48);
i2c_slave_create_simple(aspeed_i2c_get_bus(&soc->i2c, 11), TYPE_TMP105,
0x49);
i2c_mux = i2c_slave_create_simple(aspeed_i2c_get_bus(&soc->i2c, 11),
"pca9546", 0x70);
aspeed_eeprom_init(pca954x_i2c_get_bus(i2c_mux, 0), 0x50, 64 * KiB);
aspeed_eeprom_init(pca954x_i2c_get_bus(i2c_mux, 1), 0x51, 64 * KiB);
create_pca9552(soc, 11, 0x60);
aspeed_eeprom_init(aspeed_i2c_get_bus(&soc->i2c, 13), 0x50, 64 * KiB);
create_pca9552(soc, 13, 0x60);
aspeed_eeprom_init(aspeed_i2c_get_bus(&soc->i2c, 14), 0x50, 64 * KiB);
create_pca9552(soc, 14, 0x60);
aspeed_eeprom_init(aspeed_i2c_get_bus(&soc->i2c, 15), 0x50, 64 * KiB);
create_pca9552(soc, 15, 0x60);
}
static void get_pca9548_channels(I2CBus *bus, uint8_t mux_addr,
I2CBus **channels)
{
I2CSlave *mux = i2c_slave_create_simple(bus, "pca9548", mux_addr);
for (int i = 0; i < 8; i++) {
channels[i] = pca954x_i2c_get_bus(mux, i);
}
}
#define TYPE_LM75 TYPE_TMP105
#define TYPE_TMP75 TYPE_TMP105
#define TYPE_TMP422 "tmp422"
static void fuji_bmc_i2c_init(AspeedMachineState *bmc)
{
AspeedSoCState *soc = &bmc->soc;
I2CBus *i2c[144] = {};
for (int i = 0; i < 16; i++) {
i2c[i] = aspeed_i2c_get_bus(&soc->i2c, i);
}
I2CBus *i2c180 = i2c[2];
I2CBus *i2c480 = i2c[8];
I2CBus *i2c600 = i2c[11];
get_pca9548_channels(i2c180, 0x70, &i2c[16]);
get_pca9548_channels(i2c480, 0x70, &i2c[24]);
/* NOTE: The device tree skips [32, 40) in the alias numbering */
get_pca9548_channels(i2c600, 0x77, &i2c[40]);
get_pca9548_channels(i2c[24], 0x71, &i2c[48]);
get_pca9548_channels(i2c[25], 0x72, &i2c[56]);
get_pca9548_channels(i2c[26], 0x76, &i2c[64]);
get_pca9548_channels(i2c[27], 0x76, &i2c[72]);
for (int i = 0; i < 8; i++) {
get_pca9548_channels(i2c[40 + i], 0x76, &i2c[80 + i * 8]);
}
i2c_slave_create_simple(i2c[17], TYPE_LM75, 0x4c);
i2c_slave_create_simple(i2c[17], TYPE_LM75, 0x4d);
aspeed_eeprom_init(i2c[19], 0x52, 64 * KiB);
aspeed_eeprom_init(i2c[20], 0x50, 2 * KiB);
aspeed_eeprom_init(i2c[22], 0x52, 2 * KiB);
i2c_slave_create_simple(i2c[3], TYPE_LM75, 0x48);
i2c_slave_create_simple(i2c[3], TYPE_LM75, 0x49);
i2c_slave_create_simple(i2c[3], TYPE_LM75, 0x4a);
i2c_slave_create_simple(i2c[3], TYPE_TMP422, 0x4c);
aspeed_eeprom_init(i2c[8], 0x51, 64 * KiB);
i2c_slave_create_simple(i2c[8], TYPE_LM75, 0x4a);
i2c_slave_create_simple(i2c[50], TYPE_LM75, 0x4c);
aspeed_eeprom_init(i2c[50], 0x52, 64 * KiB);
i2c_slave_create_simple(i2c[51], TYPE_TMP75, 0x48);
i2c_slave_create_simple(i2c[52], TYPE_TMP75, 0x49);
i2c_slave_create_simple(i2c[59], TYPE_TMP75, 0x48);
i2c_slave_create_simple(i2c[60], TYPE_TMP75, 0x49);
aspeed_eeprom_init(i2c[65], 0x53, 64 * KiB);
i2c_slave_create_simple(i2c[66], TYPE_TMP75, 0x49);
i2c_slave_create_simple(i2c[66], TYPE_TMP75, 0x48);
aspeed_eeprom_init(i2c[68], 0x52, 64 * KiB);
aspeed_eeprom_init(i2c[69], 0x52, 64 * KiB);
aspeed_eeprom_init(i2c[70], 0x52, 64 * KiB);
aspeed_eeprom_init(i2c[71], 0x52, 64 * KiB);
aspeed_eeprom_init(i2c[73], 0x53, 64 * KiB);
i2c_slave_create_simple(i2c[74], TYPE_TMP75, 0x49);
i2c_slave_create_simple(i2c[74], TYPE_TMP75, 0x48);
aspeed_eeprom_init(i2c[76], 0x52, 64 * KiB);
aspeed_eeprom_init(i2c[77], 0x52, 64 * KiB);
aspeed_eeprom_init(i2c[78], 0x52, 64 * KiB);
aspeed_eeprom_init(i2c[79], 0x52, 64 * KiB);
aspeed_eeprom_init(i2c[28], 0x50, 2 * KiB);
for (int i = 0; i < 8; i++) {
aspeed_eeprom_init(i2c[81 + i * 8], 0x56, 64 * KiB);
i2c_slave_create_simple(i2c[82 + i * 8], TYPE_TMP75, 0x48);
i2c_slave_create_simple(i2c[83 + i * 8], TYPE_TMP75, 0x4b);
i2c_slave_create_simple(i2c[84 + i * 8], TYPE_TMP75, 0x4a);
}
}
#define TYPE_TMP421 "tmp421"
static void bletchley_bmc_i2c_init(AspeedMachineState *bmc)
{
AspeedSoCState *soc = &bmc->soc;
I2CBus *i2c[13] = {};
for (int i = 0; i < 13; i++) {
if ((i == 8) || (i == 11)) {
continue;
}
i2c[i] = aspeed_i2c_get_bus(&soc->i2c, i);
}
/* Bus 0 - 5 all have the same config. */
for (int i = 0; i < 6; i++) {
/* Missing model: ti,ina230 @ 0x45 */
/* Missing model: mps,mp5023 @ 0x40 */
i2c_slave_create_simple(i2c[i], TYPE_TMP421, 0x4f);
/* Missing model: nxp,pca9539 @ 0x76, but PCA9552 works enough */
i2c_slave_create_simple(i2c[i], TYPE_PCA9552, 0x76);
i2c_slave_create_simple(i2c[i], TYPE_PCA9552, 0x67);
/* Missing model: fsc,fusb302 @ 0x22 */
}
/* Bus 6 */
at24c_eeprom_init(i2c[6], 0x56, 65536);
/* Missing model: nxp,pcf85263 @ 0x51 , but ds1338 works enough */
i2c_slave_create_simple(i2c[6], "ds1338", 0x51);
/* Bus 7 */
at24c_eeprom_init(i2c[7], 0x54, 65536);
/* Bus 9 */
i2c_slave_create_simple(i2c[9], TYPE_TMP421, 0x4f);
/* Bus 10 */
i2c_slave_create_simple(i2c[10], TYPE_TMP421, 0x4f);
/* Missing model: ti,hdc1080 @ 0x40 */
i2c_slave_create_simple(i2c[10], TYPE_PCA9552, 0x67);
/* Bus 12 */
/* Missing model: adi,adm1278 @ 0x11 */
i2c_slave_create_simple(i2c[12], TYPE_TMP421, 0x4c);
i2c_slave_create_simple(i2c[12], TYPE_TMP421, 0x4d);
i2c_slave_create_simple(i2c[12], TYPE_PCA9552, 0x67);
}
static void fby35_i2c_init(AspeedMachineState *bmc)
{
AspeedSoCState *soc = &bmc->soc;
I2CBus *i2c[16];
for (int i = 0; i < 16; i++) {
i2c[i] = aspeed_i2c_get_bus(&soc->i2c, i);
}
i2c_slave_create_simple(i2c[2], TYPE_LM75, 0x4f);
i2c_slave_create_simple(i2c[8], TYPE_TMP421, 0x1f);
/* Hotswap controller is actually supposed to be mp5920 or ltc4282. */
i2c_slave_create_simple(i2c[11], "adm1272", 0x44);
i2c_slave_create_simple(i2c[12], TYPE_LM75, 0x4e);
i2c_slave_create_simple(i2c[12], TYPE_LM75, 0x4f);
aspeed_eeprom_init(i2c[4], 0x51, 128 * KiB);
aspeed_eeprom_init(i2c[6], 0x51, 128 * KiB);
aspeed_eeprom_init(i2c[8], 0x50, 32 * KiB);
aspeed_eeprom_init(i2c[11], 0x51, 128 * KiB);
aspeed_eeprom_init(i2c[11], 0x54, 128 * KiB);
/*
* TODO: There is a multi-master i2c connection to an AST1030 MiniBMC on
* buses 0, 1, 2, 3, and 9. Source address 0x10, target address 0x20 on
* each.
*/
}
static void qcom_dc_scm_bmc_i2c_init(AspeedMachineState *bmc)
{
AspeedSoCState *soc = &bmc->soc;
i2c_slave_create_simple(aspeed_i2c_get_bus(&soc->i2c, 15), "tmp105", 0x4d);
}
static void qcom_dc_scm_firework_i2c_init(AspeedMachineState *bmc)
{
AspeedSoCState *soc = &bmc->soc;
I2CSlave *therm_mux, *cpuvr_mux;
/* Create the generic DC-SCM hardware */
qcom_dc_scm_bmc_i2c_init(bmc);
/* Now create the Firework specific hardware */
/* I2C7 CPUVR MUX */
cpuvr_mux = i2c_slave_create_simple(aspeed_i2c_get_bus(&soc->i2c, 7),
"pca9546", 0x70);
i2c_slave_create_simple(pca954x_i2c_get_bus(cpuvr_mux, 0), "pca9548", 0x72);
i2c_slave_create_simple(pca954x_i2c_get_bus(cpuvr_mux, 1), "pca9548", 0x72);
i2c_slave_create_simple(pca954x_i2c_get_bus(cpuvr_mux, 2), "pca9548", 0x72);
i2c_slave_create_simple(pca954x_i2c_get_bus(cpuvr_mux, 3), "pca9548", 0x72);
/* I2C8 Thermal Diodes*/
therm_mux = i2c_slave_create_simple(aspeed_i2c_get_bus(&soc->i2c, 8),
"pca9548", 0x70);
i2c_slave_create_simple(pca954x_i2c_get_bus(therm_mux, 0), TYPE_LM75, 0x4C);
i2c_slave_create_simple(pca954x_i2c_get_bus(therm_mux, 1), TYPE_LM75, 0x4C);
i2c_slave_create_simple(pca954x_i2c_get_bus(therm_mux, 2), TYPE_LM75, 0x48);
i2c_slave_create_simple(pca954x_i2c_get_bus(therm_mux, 3), TYPE_LM75, 0x48);
i2c_slave_create_simple(pca954x_i2c_get_bus(therm_mux, 4), TYPE_LM75, 0x48);
/* I2C9 Fan Controller (MAX31785) */
i2c_slave_create_simple(aspeed_i2c_get_bus(&soc->i2c, 9), "max31785", 0x52);
i2c_slave_create_simple(aspeed_i2c_get_bus(&soc->i2c, 9), "max31785", 0x54);
}
static bool aspeed_get_mmio_exec(Object *obj, Error **errp)
{
return ASPEED_MACHINE(obj)->mmio_exec;
}
static void aspeed_set_mmio_exec(Object *obj, bool value, Error **errp)
{
ASPEED_MACHINE(obj)->mmio_exec = value;
}
static void aspeed_machine_instance_init(Object *obj)
{
ASPEED_MACHINE(obj)->mmio_exec = false;
}
static char *aspeed_get_fmc_model(Object *obj, Error **errp)
{
AspeedMachineState *bmc = ASPEED_MACHINE(obj);
return g_strdup(bmc->fmc_model);
}
static void aspeed_set_fmc_model(Object *obj, const char *value, Error **errp)
{
AspeedMachineState *bmc = ASPEED_MACHINE(obj);
g_free(bmc->fmc_model);
bmc->fmc_model = g_strdup(value);
}
static char *aspeed_get_spi_model(Object *obj, Error **errp)
{
AspeedMachineState *bmc = ASPEED_MACHINE(obj);
return g_strdup(bmc->spi_model);
}
static void aspeed_set_spi_model(Object *obj, const char *value, Error **errp)
{
AspeedMachineState *bmc = ASPEED_MACHINE(obj);
g_free(bmc->spi_model);
bmc->spi_model = g_strdup(value);
}
static void aspeed_machine_class_props_init(ObjectClass *oc)
{
object_class_property_add_bool(oc, "execute-in-place",
aspeed_get_mmio_exec,
aspeed_set_mmio_exec);
object_class_property_set_description(oc, "execute-in-place",
"boot directly from CE0 flash device");
object_class_property_add_str(oc, "fmc-model", aspeed_get_fmc_model,
aspeed_set_fmc_model);
object_class_property_set_description(oc, "fmc-model",
"Change the FMC Flash model");
object_class_property_add_str(oc, "spi-model", aspeed_get_spi_model,
aspeed_set_spi_model);
object_class_property_set_description(oc, "spi-model",
"Change the SPI Flash model");
}
static int aspeed_soc_num_cpus(const char *soc_name)
{
AspeedSoCClass *sc = ASPEED_SOC_CLASS(object_class_by_name(soc_name));
return sc->num_cpus;
}
static void aspeed_machine_class_init(ObjectClass *oc, void *data)
{
MachineClass *mc = MACHINE_CLASS(oc);
AspeedMachineClass *amc = ASPEED_MACHINE_CLASS(oc);
mc->init = aspeed_machine_init;
mc->no_floppy = 1;
mc->no_cdrom = 1;
mc->no_parallel = 1;
mc->default_ram_id = "ram";
amc->macs_mask = ASPEED_MAC0_ON;
amc->uart_default = ASPEED_DEV_UART5;
aspeed_machine_class_props_init(oc);
}
static void aspeed_machine_palmetto_class_init(ObjectClass *oc, void *data)
{
MachineClass *mc = MACHINE_CLASS(oc);
AspeedMachineClass *amc = ASPEED_MACHINE_CLASS(oc);
mc->desc = "OpenPOWER Palmetto BMC (ARM926EJ-S)";
amc->soc_name = "ast2400-a1";
amc->hw_strap1 = PALMETTO_BMC_HW_STRAP1;
amc->fmc_model = "n25q256a";
amc->spi_model = "mx25l25635e";
amc->num_cs = 1;
amc->i2c_init = palmetto_bmc_i2c_init;
mc->default_ram_size = 256 * MiB;
mc->default_cpus = mc->min_cpus = mc->max_cpus =
aspeed_soc_num_cpus(amc->soc_name);
};
static void aspeed_machine_quanta_q71l_class_init(ObjectClass *oc, void *data)
{
MachineClass *mc = MACHINE_CLASS(oc);
AspeedMachineClass *amc = ASPEED_MACHINE_CLASS(oc);
mc->desc = "Quanta-Q71l BMC (ARM926EJ-S)";
amc->soc_name = "ast2400-a1";
amc->hw_strap1 = QUANTA_Q71L_BMC_HW_STRAP1;
amc->fmc_model = "n25q256a";
amc->spi_model = "mx25l25635e";
amc->num_cs = 1;
amc->i2c_init = quanta_q71l_bmc_i2c_init;
mc->default_ram_size = 128 * MiB;
mc->default_cpus = mc->min_cpus = mc->max_cpus =
aspeed_soc_num_cpus(amc->soc_name);
}
static void aspeed_machine_supermicrox11_bmc_class_init(ObjectClass *oc,
void *data)
{
MachineClass *mc = MACHINE_CLASS(oc);
AspeedMachineClass *amc = ASPEED_MACHINE_CLASS(oc);
mc->desc = "Supermicro X11 BMC (ARM926EJ-S)";
amc->soc_name = "ast2400-a1";
amc->hw_strap1 = SUPERMICROX11_BMC_HW_STRAP1;
amc->fmc_model = "mx25l25635e";
amc->spi_model = "mx25l25635e";
amc->num_cs = 1;
amc->macs_mask = ASPEED_MAC0_ON | ASPEED_MAC1_ON;
amc->i2c_init = palmetto_bmc_i2c_init;
mc->default_ram_size = 256 * MiB;
}
static void aspeed_machine_ast2500_evb_class_init(ObjectClass *oc, void *data)
{
MachineClass *mc = MACHINE_CLASS(oc);
AspeedMachineClass *amc = ASPEED_MACHINE_CLASS(oc);
mc->desc = "Aspeed AST2500 EVB (ARM1176)";
amc->soc_name = "ast2500-a1";
amc->hw_strap1 = AST2500_EVB_HW_STRAP1;
amc->fmc_model = "mx25l25635e";
amc->spi_model = "mx25l25635e";
amc->num_cs = 1;
amc->i2c_init = ast2500_evb_i2c_init;
mc->default_ram_size = 512 * MiB;
mc->default_cpus = mc->min_cpus = mc->max_cpus =
aspeed_soc_num_cpus(amc->soc_name);
};
static void aspeed_machine_romulus_class_init(ObjectClass *oc, void *data)
{
MachineClass *mc = MACHINE_CLASS(oc);
AspeedMachineClass *amc = ASPEED_MACHINE_CLASS(oc);
mc->desc = "OpenPOWER Romulus BMC (ARM1176)";
amc->soc_name = "ast2500-a1";
amc->hw_strap1 = ROMULUS_BMC_HW_STRAP1;
amc->fmc_model = "n25q256a";
amc->spi_model = "mx66l1g45g";
amc->num_cs = 2;
amc->i2c_init = romulus_bmc_i2c_init;
mc->default_ram_size = 512 * MiB;
mc->default_cpus = mc->min_cpus = mc->max_cpus =
aspeed_soc_num_cpus(amc->soc_name);
};
static void aspeed_machine_sonorapass_class_init(ObjectClass *oc, void *data)
{
MachineClass *mc = MACHINE_CLASS(oc);
AspeedMachineClass *amc = ASPEED_MACHINE_CLASS(oc);
mc->desc = "OCP SonoraPass BMC (ARM1176)";
amc->soc_name = "ast2500-a1";
amc->hw_strap1 = SONORAPASS_BMC_HW_STRAP1;
amc->fmc_model = "mx66l1g45g";
amc->spi_model = "mx66l1g45g";
amc->num_cs = 2;
amc->i2c_init = sonorapass_bmc_i2c_init;
mc->default_ram_size = 512 * MiB;
mc->default_cpus = mc->min_cpus = mc->max_cpus =
aspeed_soc_num_cpus(amc->soc_name);
};
static void aspeed_machine_witherspoon_class_init(ObjectClass *oc, void *data)
{
MachineClass *mc = MACHINE_CLASS(oc);
AspeedMachineClass *amc = ASPEED_MACHINE_CLASS(oc);
mc->desc = "OpenPOWER Witherspoon BMC (ARM1176)";
amc->soc_name = "ast2500-a1";
amc->hw_strap1 = WITHERSPOON_BMC_HW_STRAP1;
amc->fmc_model = "mx25l25635e";
amc->spi_model = "mx66l1g45g";
amc->num_cs = 2;
amc->i2c_init = witherspoon_bmc_i2c_init;
mc->default_ram_size = 512 * MiB;
mc->default_cpus = mc->min_cpus = mc->max_cpus =
aspeed_soc_num_cpus(amc->soc_name);
};
static void aspeed_machine_ast2600_evb_class_init(ObjectClass *oc, void *data)
{
MachineClass *mc = MACHINE_CLASS(oc);
AspeedMachineClass *amc = ASPEED_MACHINE_CLASS(oc);
mc->desc = "Aspeed AST2600 EVB (Cortex-A7)";
amc->soc_name = "ast2600-a3";
amc->hw_strap1 = AST2600_EVB_HW_STRAP1;
amc->hw_strap2 = AST2600_EVB_HW_STRAP2;
amc->fmc_model = "mx66u51235f";
amc->spi_model = "mx66u51235f";
amc->num_cs = 1;
amc->macs_mask = ASPEED_MAC0_ON | ASPEED_MAC1_ON | ASPEED_MAC2_ON |
ASPEED_MAC3_ON;
amc->i2c_init = ast2600_evb_i2c_init;
mc->default_ram_size = 1 * GiB;
mc->default_cpus = mc->min_cpus = mc->max_cpus =
aspeed_soc_num_cpus(amc->soc_name);
};
static void aspeed_machine_tacoma_class_init(ObjectClass *oc, void *data)
{
MachineClass *mc = MACHINE_CLASS(oc);
AspeedMachineClass *amc = ASPEED_MACHINE_CLASS(oc);
mc->desc = "OpenPOWER Tacoma BMC (Cortex-A7)";
amc->soc_name = "ast2600-a3";
amc->hw_strap1 = TACOMA_BMC_HW_STRAP1;
amc->hw_strap2 = TACOMA_BMC_HW_STRAP2;
amc->fmc_model = "mx66l1g45g";
amc->spi_model = "mx66l1g45g";
amc->num_cs = 2;
amc->macs_mask = ASPEED_MAC2_ON;
amc->i2c_init = witherspoon_bmc_i2c_init; /* Same board layout */
mc->default_ram_size = 1 * GiB;
mc->default_cpus = mc->min_cpus = mc->max_cpus =
aspeed_soc_num_cpus(amc->soc_name);
};
static void aspeed_machine_g220a_class_init(ObjectClass *oc, void *data)
{
MachineClass *mc = MACHINE_CLASS(oc);
AspeedMachineClass *amc = ASPEED_MACHINE_CLASS(oc);
mc->desc = "Bytedance G220A BMC (ARM1176)";
amc->soc_name = "ast2500-a1";
amc->hw_strap1 = G220A_BMC_HW_STRAP1;
amc->fmc_model = "n25q512a";
amc->spi_model = "mx25l25635e";
amc->num_cs = 2;
amc->macs_mask = ASPEED_MAC0_ON | ASPEED_MAC1_ON;
amc->i2c_init = g220a_bmc_i2c_init;
mc->default_ram_size = 1024 * MiB;
mc->default_cpus = mc->min_cpus = mc->max_cpus =
aspeed_soc_num_cpus(amc->soc_name);
};
static void aspeed_machine_fp5280g2_class_init(ObjectClass *oc, void *data)
{
MachineClass *mc = MACHINE_CLASS(oc);
AspeedMachineClass *amc = ASPEED_MACHINE_CLASS(oc);
mc->desc = "Inspur FP5280G2 BMC (ARM1176)";
amc->soc_name = "ast2500-a1";
amc->hw_strap1 = FP5280G2_BMC_HW_STRAP1;
amc->fmc_model = "n25q512a";
amc->spi_model = "mx25l25635e";
amc->num_cs = 2;
amc->macs_mask = ASPEED_MAC0_ON | ASPEED_MAC1_ON;
amc->i2c_init = fp5280g2_bmc_i2c_init;
mc->default_ram_size = 512 * MiB;
mc->default_cpus = mc->min_cpus = mc->max_cpus =
aspeed_soc_num_cpus(amc->soc_name);
};
static void aspeed_machine_rainier_class_init(ObjectClass *oc, void *data)
{
MachineClass *mc = MACHINE_CLASS(oc);
AspeedMachineClass *amc = ASPEED_MACHINE_CLASS(oc);
mc->desc = "IBM Rainier BMC (Cortex-A7)";
amc->soc_name = "ast2600-a3";
amc->hw_strap1 = RAINIER_BMC_HW_STRAP1;
amc->hw_strap2 = RAINIER_BMC_HW_STRAP2;
amc->fmc_model = "mx66l1g45g";
amc->spi_model = "mx66l1g45g";
amc->num_cs = 2;
amc->macs_mask = ASPEED_MAC2_ON | ASPEED_MAC3_ON;
amc->i2c_init = rainier_bmc_i2c_init;
mc->default_ram_size = 1 * GiB;
mc->default_cpus = mc->min_cpus = mc->max_cpus =
aspeed_soc_num_cpus(amc->soc_name);
};
/* On 32-bit hosts, lower RAM to 1G because of the 2047 MB limit */
#if HOST_LONG_BITS == 32
#define FUJI_BMC_RAM_SIZE (1 * GiB)
#else
#define FUJI_BMC_RAM_SIZE (2 * GiB)
#endif
static void aspeed_machine_fuji_class_init(ObjectClass *oc, void *data)
{
MachineClass *mc = MACHINE_CLASS(oc);
AspeedMachineClass *amc = ASPEED_MACHINE_CLASS(oc);
mc->desc = "Facebook Fuji BMC (Cortex-A7)";
amc->soc_name = "ast2600-a3";
amc->hw_strap1 = FUJI_BMC_HW_STRAP1;
amc->hw_strap2 = FUJI_BMC_HW_STRAP2;
amc->fmc_model = "mx66l1g45g";
amc->spi_model = "mx66l1g45g";
amc->num_cs = 2;
amc->macs_mask = ASPEED_MAC3_ON;
amc->i2c_init = fuji_bmc_i2c_init;
amc->uart_default = ASPEED_DEV_UART1;
mc->default_ram_size = FUJI_BMC_RAM_SIZE;
mc->default_cpus = mc->min_cpus = mc->max_cpus =
aspeed_soc_num_cpus(amc->soc_name);
};
static void aspeed_machine_bletchley_class_init(ObjectClass *oc, void *data)
{
MachineClass *mc = MACHINE_CLASS(oc);
AspeedMachineClass *amc = ASPEED_MACHINE_CLASS(oc);
mc->desc = "Facebook Bletchley BMC (Cortex-A7)";
amc->soc_name = "ast2600-a3";
amc->hw_strap1 = BLETCHLEY_BMC_HW_STRAP1;
amc->hw_strap2 = BLETCHLEY_BMC_HW_STRAP2;
amc->fmc_model = "w25q01jvq";
amc->spi_model = NULL;
amc->num_cs = 2;
amc->macs_mask = ASPEED_MAC2_ON;
amc->i2c_init = bletchley_bmc_i2c_init;
mc->default_ram_size = 512 * MiB;
mc->default_cpus = mc->min_cpus = mc->max_cpus =
aspeed_soc_num_cpus(amc->soc_name);
}
static void fby35_reset(MachineState *state)
{
AspeedMachineState *bmc = ASPEED_MACHINE(state);
AspeedGPIOState *gpio = &bmc->soc.gpio;
qemu_devices_reset();
/* Board ID: 7 (Class-1, 4 slots) */
object_property_set_bool(OBJECT(gpio), "gpioV4", true, &error_fatal);
object_property_set_bool(OBJECT(gpio), "gpioV5", true, &error_fatal);
object_property_set_bool(OBJECT(gpio), "gpioV6", true, &error_fatal);
object_property_set_bool(OBJECT(gpio), "gpioV7", false, &error_fatal);
/* Slot presence pins, inverse polarity. (False means present) */
object_property_set_bool(OBJECT(gpio), "gpioH4", false, &error_fatal);
object_property_set_bool(OBJECT(gpio), "gpioH5", true, &error_fatal);
object_property_set_bool(OBJECT(gpio), "gpioH6", true, &error_fatal);
object_property_set_bool(OBJECT(gpio), "gpioH7", true, &error_fatal);
/* Slot 12v power pins, normal polarity. (True means powered-on) */
object_property_set_bool(OBJECT(gpio), "gpioB2", true, &error_fatal);
object_property_set_bool(OBJECT(gpio), "gpioB3", false, &error_fatal);
object_property_set_bool(OBJECT(gpio), "gpioB4", false, &error_fatal);
object_property_set_bool(OBJECT(gpio), "gpioB5", false, &error_fatal);
}
static void aspeed_machine_fby35_class_init(ObjectClass *oc, void *data)
{
MachineClass *mc = MACHINE_CLASS(oc);
AspeedMachineClass *amc = ASPEED_MACHINE_CLASS(oc);
mc->desc = "Facebook fby35 BMC (Cortex-A7)";
mc->reset = fby35_reset;
amc->fmc_model = "mx66l1g45g";
amc->num_cs = 2;
amc->macs_mask = ASPEED_MAC3_ON;
amc->i2c_init = fby35_i2c_init;
/* FIXME: Replace this macro with something more general */
mc->default_ram_size = FUJI_BMC_RAM_SIZE;
}
#define AST1030_INTERNAL_FLASH_SIZE (1024 * 1024)
/* Main SYSCLK frequency in Hz (200MHz) */
#define SYSCLK_FRQ 200000000ULL
static void aspeed_minibmc_machine_init(MachineState *machine)
{
AspeedMachineState *bmc = ASPEED_MACHINE(machine);
AspeedMachineClass *amc = ASPEED_MACHINE_GET_CLASS(machine);
Clock *sysclk;
sysclk = clock_new(OBJECT(machine), "SYSCLK");
clock_set_hz(sysclk, SYSCLK_FRQ);
object_initialize_child(OBJECT(machine), "soc", &bmc->soc, amc->soc_name);
qdev_connect_clock_in(DEVICE(&bmc->soc), "sysclk", sysclk);
object_property_set_link(OBJECT(&bmc->soc), "memory",
OBJECT(get_system_memory()), &error_abort);
connect_serial_hds_to_uarts(bmc);
qdev_realize(DEVICE(&bmc->soc), NULL, &error_abort);
aspeed_board_init_flashes(&bmc->soc.fmc,
bmc->fmc_model ? bmc->fmc_model : amc->fmc_model,
amc->num_cs,
0);
aspeed_board_init_flashes(&bmc->soc.spi[0],
bmc->spi_model ? bmc->spi_model : amc->spi_model,
amc->num_cs, amc->num_cs);
aspeed_board_init_flashes(&bmc->soc.spi[1],
bmc->spi_model ? bmc->spi_model : amc->spi_model,
amc->num_cs, (amc->num_cs * 2));
if (amc->i2c_init) {
amc->i2c_init(bmc);
}
armv7m_load_kernel(ARM_CPU(first_cpu),
machine->kernel_filename,
0,
AST1030_INTERNAL_FLASH_SIZE);
}
static void ast1030_evb_i2c_init(AspeedMachineState *bmc)
{
AspeedSoCState *soc = &bmc->soc;
/* U10 24C08 connects to SDA/SCL Groupt 1 by default */
uint8_t *eeprom_buf = g_malloc0(32 * 1024);
smbus_eeprom_init_one(aspeed_i2c_get_bus(&soc->i2c, 0), 0x50, eeprom_buf);
/* U11 LM75 connects to SDA/SCL Group 2 by default */
i2c_slave_create_simple(aspeed_i2c_get_bus(&soc->i2c, 1), "tmp105", 0x4d);
}
static void aspeed_minibmc_machine_ast1030_evb_class_init(ObjectClass *oc,
void *data)
{
MachineClass *mc = MACHINE_CLASS(oc);
AspeedMachineClass *amc = ASPEED_MACHINE_CLASS(oc);
mc->desc = "Aspeed AST1030 MiniBMC (Cortex-M4)";
amc->soc_name = "ast1030-a1";
amc->hw_strap1 = 0;
amc->hw_strap2 = 0;
mc->init = aspeed_minibmc_machine_init;
amc->i2c_init = ast1030_evb_i2c_init;
mc->default_ram_size = 0;
mc->default_cpus = mc->min_cpus = mc->max_cpus = 1;
amc->fmc_model = "sst25vf032b";
amc->spi_model = "sst25vf032b";
amc->num_cs = 2;
amc->macs_mask = 0;
}
static void aspeed_machine_qcom_dc_scm_v1_class_init(ObjectClass *oc,
void *data)
{
MachineClass *mc = MACHINE_CLASS(oc);
AspeedMachineClass *amc = ASPEED_MACHINE_CLASS(oc);
mc->desc = "Qualcomm DC-SCM V1 BMC (Cortex A7)";
amc->soc_name = "ast2600-a3";
amc->hw_strap1 = QCOM_DC_SCM_V1_BMC_HW_STRAP1;
amc->hw_strap2 = QCOM_DC_SCM_V1_BMC_HW_STRAP2;
amc->fmc_model = "n25q512a";
amc->spi_model = "n25q512a";
amc->num_cs = 2;
amc->macs_mask = ASPEED_MAC2_ON | ASPEED_MAC3_ON;
amc->i2c_init = qcom_dc_scm_bmc_i2c_init;
mc->default_ram_size = 1 * GiB;
mc->default_cpus = mc->min_cpus = mc->max_cpus =
aspeed_soc_num_cpus(amc->soc_name);
};
static void aspeed_machine_qcom_firework_class_init(ObjectClass *oc,
void *data)
{
MachineClass *mc = MACHINE_CLASS(oc);
AspeedMachineClass *amc = ASPEED_MACHINE_CLASS(oc);
mc->desc = "Qualcomm DC-SCM V1/Firework BMC (Cortex A7)";
amc->soc_name = "ast2600-a3";
amc->hw_strap1 = QCOM_DC_SCM_V1_BMC_HW_STRAP1;
amc->hw_strap2 = QCOM_DC_SCM_V1_BMC_HW_STRAP2;
amc->fmc_model = "n25q512a";
amc->spi_model = "n25q512a";
amc->num_cs = 2;
amc->macs_mask = ASPEED_MAC2_ON | ASPEED_MAC3_ON;
amc->i2c_init = qcom_dc_scm_firework_i2c_init;
mc->default_ram_size = 1 * GiB;
mc->default_cpus = mc->min_cpus = mc->max_cpus =
aspeed_soc_num_cpus(amc->soc_name);
};
static const TypeInfo aspeed_machine_types[] = {
{
.name = MACHINE_TYPE_NAME("palmetto-bmc"),
.parent = TYPE_ASPEED_MACHINE,
.class_init = aspeed_machine_palmetto_class_init,
}, {
.name = MACHINE_TYPE_NAME("supermicrox11-bmc"),
.parent = TYPE_ASPEED_MACHINE,
.class_init = aspeed_machine_supermicrox11_bmc_class_init,
}, {
.name = MACHINE_TYPE_NAME("ast2500-evb"),
.parent = TYPE_ASPEED_MACHINE,
.class_init = aspeed_machine_ast2500_evb_class_init,
}, {
.name = MACHINE_TYPE_NAME("romulus-bmc"),
.parent = TYPE_ASPEED_MACHINE,
.class_init = aspeed_machine_romulus_class_init,
}, {
.name = MACHINE_TYPE_NAME("sonorapass-bmc"),
.parent = TYPE_ASPEED_MACHINE,
.class_init = aspeed_machine_sonorapass_class_init,
}, {
.name = MACHINE_TYPE_NAME("witherspoon-bmc"),
.parent = TYPE_ASPEED_MACHINE,
.class_init = aspeed_machine_witherspoon_class_init,
}, {
.name = MACHINE_TYPE_NAME("ast2600-evb"),
.parent = TYPE_ASPEED_MACHINE,
.class_init = aspeed_machine_ast2600_evb_class_init,
}, {
.name = MACHINE_TYPE_NAME("tacoma-bmc"),
.parent = TYPE_ASPEED_MACHINE,
.class_init = aspeed_machine_tacoma_class_init,
}, {
.name = MACHINE_TYPE_NAME("g220a-bmc"),
.parent = TYPE_ASPEED_MACHINE,
.class_init = aspeed_machine_g220a_class_init,
}, {
.name = MACHINE_TYPE_NAME("qcom-dc-scm-v1-bmc"),
.parent = TYPE_ASPEED_MACHINE,
.class_init = aspeed_machine_qcom_dc_scm_v1_class_init,
}, {
.name = MACHINE_TYPE_NAME("qcom-firework-bmc"),
.parent = TYPE_ASPEED_MACHINE,
.class_init = aspeed_machine_qcom_firework_class_init,
}, {
.name = MACHINE_TYPE_NAME("fp5280g2-bmc"),
.parent = TYPE_ASPEED_MACHINE,
.class_init = aspeed_machine_fp5280g2_class_init,
}, {
.name = MACHINE_TYPE_NAME("quanta-q71l-bmc"),
.parent = TYPE_ASPEED_MACHINE,
.class_init = aspeed_machine_quanta_q71l_class_init,
}, {
.name = MACHINE_TYPE_NAME("rainier-bmc"),
.parent = TYPE_ASPEED_MACHINE,
.class_init = aspeed_machine_rainier_class_init,
}, {
.name = MACHINE_TYPE_NAME("fuji-bmc"),
.parent = TYPE_ASPEED_MACHINE,
.class_init = aspeed_machine_fuji_class_init,
}, {
.name = MACHINE_TYPE_NAME("bletchley-bmc"),
.parent = TYPE_ASPEED_MACHINE,
.class_init = aspeed_machine_bletchley_class_init,
}, {
.name = MACHINE_TYPE_NAME("fby35-bmc"),
.parent = MACHINE_TYPE_NAME("ast2600-evb"),
.class_init = aspeed_machine_fby35_class_init,
}, {
.name = MACHINE_TYPE_NAME("ast1030-evb"),
.parent = TYPE_ASPEED_MACHINE,
.class_init = aspeed_minibmc_machine_ast1030_evb_class_init,
}, {
.name = TYPE_ASPEED_MACHINE,
.parent = TYPE_MACHINE,
.instance_size = sizeof(AspeedMachineState),
.instance_init = aspeed_machine_instance_init,
.class_size = sizeof(AspeedMachineClass),
.class_init = aspeed_machine_class_init,
.abstract = true,
}
};
DEFINE_TYPES(aspeed_machine_types)
Reference in New Issue View Git Blame Copy Permalink