mirror of
https://github.com/xemu-project/xemu.git
synced 2024-11-23 19:49:43 +00:00
55c57023b7
This introduces a really basic PECI controller that responses to commands by always setting the response code to success and then raising an interrupt to indicate the command is done. This helps avoid getting hit with constant errors if the driver continuously attempts to send a command and keeps timing out. The AST2400 and AST2500 only included registers up to 0x5C, not 0xFC. They supported PECI 1.1, 2.0, and 3.0. The AST2600 and AST1030 support PECI 4.0, which includes more read/write buffer registers from 0x80 to 0xFC to support 64-byte mode. This patch doesn't attempt to handle that, or to create a different version of the controller for the different generations, since it's only implementing functionality that is common to all generations. The basic sequence of events is that the firmware will read and write to various registers and then trigger a command by setting the FIRE bit in the command register (similar to the I2C controller). Then the firmware waits for an interrupt from the PECI controller, expecting the interrupt status register to be filled in with info on what happened. If the command was transmitted and received successfully, then response codes from the host CPU will be found in the data buffer registers. Signed-off-by: Peter Delevoryas <pdel@fb.com> Reviewed-by: Cédric Le Goater <clg@kaod.org> Message-Id: <20220630045133.32251-12-me@pjd.dev> [ clg: s/sysbus_mmio_map/aspeed_mmio_map/ ] Signed-off-by: Cédric Le Goater <clg@kaod.org>
651 lines
22 KiB
C
651 lines
22 KiB
C
/*
|
|
* ASPEED SoC family
|
|
*
|
|
* Andrew Jeffery <andrew@aj.id.au>
|
|
* Jeremy Kerr <jk@ozlabs.org>
|
|
*
|
|
* Copyright 2016 IBM Corp.
|
|
*
|
|
* This code is licensed under the GPL version 2 or later. See
|
|
* the COPYING file in the top-level directory.
|
|
*/
|
|
|
|
#include "qemu/osdep.h"
|
|
#include "qemu/units.h"
|
|
#include "qapi/error.h"
|
|
#include "hw/misc/unimp.h"
|
|
#include "hw/arm/aspeed_soc.h"
|
|
#include "hw/char/serial.h"
|
|
#include "qemu/module.h"
|
|
#include "qemu/error-report.h"
|
|
#include "hw/i2c/aspeed_i2c.h"
|
|
#include "net/net.h"
|
|
#include "sysemu/sysemu.h"
|
|
|
|
#define ASPEED_SOC_IOMEM_SIZE 0x00200000
|
|
|
|
static const hwaddr aspeed_soc_ast2400_memmap[] = {
|
|
[ASPEED_DEV_IOMEM] = 0x1E600000,
|
|
[ASPEED_DEV_FMC] = 0x1E620000,
|
|
[ASPEED_DEV_SPI1] = 0x1E630000,
|
|
[ASPEED_DEV_EHCI1] = 0x1E6A1000,
|
|
[ASPEED_DEV_VIC] = 0x1E6C0000,
|
|
[ASPEED_DEV_SDMC] = 0x1E6E0000,
|
|
[ASPEED_DEV_SCU] = 0x1E6E2000,
|
|
[ASPEED_DEV_HACE] = 0x1E6E3000,
|
|
[ASPEED_DEV_XDMA] = 0x1E6E7000,
|
|
[ASPEED_DEV_VIDEO] = 0x1E700000,
|
|
[ASPEED_DEV_ADC] = 0x1E6E9000,
|
|
[ASPEED_DEV_SRAM] = 0x1E720000,
|
|
[ASPEED_DEV_SDHCI] = 0x1E740000,
|
|
[ASPEED_DEV_GPIO] = 0x1E780000,
|
|
[ASPEED_DEV_RTC] = 0x1E781000,
|
|
[ASPEED_DEV_TIMER1] = 0x1E782000,
|
|
[ASPEED_DEV_WDT] = 0x1E785000,
|
|
[ASPEED_DEV_PWM] = 0x1E786000,
|
|
[ASPEED_DEV_LPC] = 0x1E789000,
|
|
[ASPEED_DEV_IBT] = 0x1E789140,
|
|
[ASPEED_DEV_I2C] = 0x1E78A000,
|
|
[ASPEED_DEV_PECI] = 0x1E78B000,
|
|
[ASPEED_DEV_ETH1] = 0x1E660000,
|
|
[ASPEED_DEV_ETH2] = 0x1E680000,
|
|
[ASPEED_DEV_UART1] = 0x1E783000,
|
|
[ASPEED_DEV_UART2] = 0x1E78D000,
|
|
[ASPEED_DEV_UART3] = 0x1E78E000,
|
|
[ASPEED_DEV_UART4] = 0x1E78F000,
|
|
[ASPEED_DEV_UART5] = 0x1E784000,
|
|
[ASPEED_DEV_VUART] = 0x1E787000,
|
|
[ASPEED_DEV_SDRAM] = 0x40000000,
|
|
};
|
|
|
|
static const hwaddr aspeed_soc_ast2500_memmap[] = {
|
|
[ASPEED_DEV_IOMEM] = 0x1E600000,
|
|
[ASPEED_DEV_FMC] = 0x1E620000,
|
|
[ASPEED_DEV_SPI1] = 0x1E630000,
|
|
[ASPEED_DEV_SPI2] = 0x1E631000,
|
|
[ASPEED_DEV_EHCI1] = 0x1E6A1000,
|
|
[ASPEED_DEV_EHCI2] = 0x1E6A3000,
|
|
[ASPEED_DEV_VIC] = 0x1E6C0000,
|
|
[ASPEED_DEV_SDMC] = 0x1E6E0000,
|
|
[ASPEED_DEV_SCU] = 0x1E6E2000,
|
|
[ASPEED_DEV_HACE] = 0x1E6E3000,
|
|
[ASPEED_DEV_XDMA] = 0x1E6E7000,
|
|
[ASPEED_DEV_ADC] = 0x1E6E9000,
|
|
[ASPEED_DEV_VIDEO] = 0x1E700000,
|
|
[ASPEED_DEV_SRAM] = 0x1E720000,
|
|
[ASPEED_DEV_SDHCI] = 0x1E740000,
|
|
[ASPEED_DEV_GPIO] = 0x1E780000,
|
|
[ASPEED_DEV_RTC] = 0x1E781000,
|
|
[ASPEED_DEV_TIMER1] = 0x1E782000,
|
|
[ASPEED_DEV_WDT] = 0x1E785000,
|
|
[ASPEED_DEV_PWM] = 0x1E786000,
|
|
[ASPEED_DEV_LPC] = 0x1E789000,
|
|
[ASPEED_DEV_IBT] = 0x1E789140,
|
|
[ASPEED_DEV_I2C] = 0x1E78A000,
|
|
[ASPEED_DEV_PECI] = 0x1E78B000,
|
|
[ASPEED_DEV_ETH1] = 0x1E660000,
|
|
[ASPEED_DEV_ETH2] = 0x1E680000,
|
|
[ASPEED_DEV_UART1] = 0x1E783000,
|
|
[ASPEED_DEV_UART2] = 0x1E78D000,
|
|
[ASPEED_DEV_UART3] = 0x1E78E000,
|
|
[ASPEED_DEV_UART4] = 0x1E78F000,
|
|
[ASPEED_DEV_UART5] = 0x1E784000,
|
|
[ASPEED_DEV_VUART] = 0x1E787000,
|
|
[ASPEED_DEV_SDRAM] = 0x80000000,
|
|
};
|
|
|
|
static const int aspeed_soc_ast2400_irqmap[] = {
|
|
[ASPEED_DEV_UART1] = 9,
|
|
[ASPEED_DEV_UART2] = 32,
|
|
[ASPEED_DEV_UART3] = 33,
|
|
[ASPEED_DEV_UART4] = 34,
|
|
[ASPEED_DEV_UART5] = 10,
|
|
[ASPEED_DEV_VUART] = 8,
|
|
[ASPEED_DEV_FMC] = 19,
|
|
[ASPEED_DEV_EHCI1] = 5,
|
|
[ASPEED_DEV_EHCI2] = 13,
|
|
[ASPEED_DEV_SDMC] = 0,
|
|
[ASPEED_DEV_SCU] = 21,
|
|
[ASPEED_DEV_ADC] = 31,
|
|
[ASPEED_DEV_GPIO] = 20,
|
|
[ASPEED_DEV_RTC] = 22,
|
|
[ASPEED_DEV_TIMER1] = 16,
|
|
[ASPEED_DEV_TIMER2] = 17,
|
|
[ASPEED_DEV_TIMER3] = 18,
|
|
[ASPEED_DEV_TIMER4] = 35,
|
|
[ASPEED_DEV_TIMER5] = 36,
|
|
[ASPEED_DEV_TIMER6] = 37,
|
|
[ASPEED_DEV_TIMER7] = 38,
|
|
[ASPEED_DEV_TIMER8] = 39,
|
|
[ASPEED_DEV_WDT] = 27,
|
|
[ASPEED_DEV_PWM] = 28,
|
|
[ASPEED_DEV_LPC] = 8,
|
|
[ASPEED_DEV_I2C] = 12,
|
|
[ASPEED_DEV_PECI] = 15,
|
|
[ASPEED_DEV_ETH1] = 2,
|
|
[ASPEED_DEV_ETH2] = 3,
|
|
[ASPEED_DEV_XDMA] = 6,
|
|
[ASPEED_DEV_SDHCI] = 26,
|
|
[ASPEED_DEV_HACE] = 4,
|
|
};
|
|
|
|
#define aspeed_soc_ast2500_irqmap aspeed_soc_ast2400_irqmap
|
|
|
|
static qemu_irq aspeed_soc_ast2400_get_irq(AspeedSoCState *s, int dev)
|
|
{
|
|
AspeedSoCClass *sc = ASPEED_SOC_GET_CLASS(s);
|
|
|
|
return qdev_get_gpio_in(DEVICE(&s->vic), sc->irqmap[dev]);
|
|
}
|
|
|
|
static void aspeed_soc_init(Object *obj)
|
|
{
|
|
AspeedSoCState *s = ASPEED_SOC(obj);
|
|
AspeedSoCClass *sc = ASPEED_SOC_GET_CLASS(s);
|
|
int i;
|
|
char socname[8];
|
|
char typename[64];
|
|
|
|
if (sscanf(sc->name, "%7s", socname) != 1) {
|
|
g_assert_not_reached();
|
|
}
|
|
|
|
for (i = 0; i < sc->num_cpus; i++) {
|
|
object_initialize_child(obj, "cpu[*]", &s->cpu[i], sc->cpu_type);
|
|
}
|
|
|
|
snprintf(typename, sizeof(typename), "aspeed.scu-%s", socname);
|
|
object_initialize_child(obj, "scu", &s->scu, typename);
|
|
qdev_prop_set_uint32(DEVICE(&s->scu), "silicon-rev",
|
|
sc->silicon_rev);
|
|
object_property_add_alias(obj, "hw-strap1", OBJECT(&s->scu),
|
|
"hw-strap1");
|
|
object_property_add_alias(obj, "hw-strap2", OBJECT(&s->scu),
|
|
"hw-strap2");
|
|
object_property_add_alias(obj, "hw-prot-key", OBJECT(&s->scu),
|
|
"hw-prot-key");
|
|
|
|
object_initialize_child(obj, "vic", &s->vic, TYPE_ASPEED_VIC);
|
|
|
|
object_initialize_child(obj, "rtc", &s->rtc, TYPE_ASPEED_RTC);
|
|
|
|
snprintf(typename, sizeof(typename), "aspeed.timer-%s", socname);
|
|
object_initialize_child(obj, "timerctrl", &s->timerctrl, typename);
|
|
|
|
snprintf(typename, sizeof(typename), "aspeed.adc-%s", socname);
|
|
object_initialize_child(obj, "adc", &s->adc, typename);
|
|
|
|
snprintf(typename, sizeof(typename), "aspeed.i2c-%s", socname);
|
|
object_initialize_child(obj, "i2c", &s->i2c, typename);
|
|
|
|
object_initialize_child(obj, "peci", &s->peci, TYPE_ASPEED_PECI);
|
|
|
|
snprintf(typename, sizeof(typename), "aspeed.fmc-%s", socname);
|
|
object_initialize_child(obj, "fmc", &s->fmc, typename);
|
|
|
|
for (i = 0; i < sc->spis_num; i++) {
|
|
snprintf(typename, sizeof(typename), "aspeed.spi%d-%s", i + 1, socname);
|
|
object_initialize_child(obj, "spi[*]", &s->spi[i], typename);
|
|
}
|
|
|
|
for (i = 0; i < sc->ehcis_num; i++) {
|
|
object_initialize_child(obj, "ehci[*]", &s->ehci[i],
|
|
TYPE_PLATFORM_EHCI);
|
|
}
|
|
|
|
snprintf(typename, sizeof(typename), "aspeed.sdmc-%s", socname);
|
|
object_initialize_child(obj, "sdmc", &s->sdmc, typename);
|
|
object_property_add_alias(obj, "ram-size", OBJECT(&s->sdmc),
|
|
"ram-size");
|
|
|
|
for (i = 0; i < sc->wdts_num; i++) {
|
|
snprintf(typename, sizeof(typename), "aspeed.wdt-%s", socname);
|
|
object_initialize_child(obj, "wdt[*]", &s->wdt[i], typename);
|
|
}
|
|
|
|
for (i = 0; i < sc->macs_num; i++) {
|
|
object_initialize_child(obj, "ftgmac100[*]", &s->ftgmac100[i],
|
|
TYPE_FTGMAC100);
|
|
}
|
|
|
|
snprintf(typename, sizeof(typename), TYPE_ASPEED_XDMA "-%s", socname);
|
|
object_initialize_child(obj, "xdma", &s->xdma, typename);
|
|
|
|
snprintf(typename, sizeof(typename), "aspeed.gpio-%s", socname);
|
|
object_initialize_child(obj, "gpio", &s->gpio, typename);
|
|
|
|
object_initialize_child(obj, "sdc", &s->sdhci, TYPE_ASPEED_SDHCI);
|
|
|
|
object_property_set_int(OBJECT(&s->sdhci), "num-slots", 2, &error_abort);
|
|
|
|
/* Init sd card slot class here so that they're under the correct parent */
|
|
for (i = 0; i < ASPEED_SDHCI_NUM_SLOTS; ++i) {
|
|
object_initialize_child(obj, "sdhci[*]", &s->sdhci.slots[i],
|
|
TYPE_SYSBUS_SDHCI);
|
|
}
|
|
|
|
object_initialize_child(obj, "lpc", &s->lpc, TYPE_ASPEED_LPC);
|
|
|
|
snprintf(typename, sizeof(typename), "aspeed.hace-%s", socname);
|
|
object_initialize_child(obj, "hace", &s->hace, typename);
|
|
|
|
object_initialize_child(obj, "iomem", &s->iomem, TYPE_UNIMPLEMENTED_DEVICE);
|
|
object_initialize_child(obj, "video", &s->video, TYPE_UNIMPLEMENTED_DEVICE);
|
|
}
|
|
|
|
static void aspeed_soc_realize(DeviceState *dev, Error **errp)
|
|
{
|
|
int i;
|
|
AspeedSoCState *s = ASPEED_SOC(dev);
|
|
AspeedSoCClass *sc = ASPEED_SOC_GET_CLASS(s);
|
|
Error *err = NULL;
|
|
|
|
/* IO space */
|
|
aspeed_mmio_map_unimplemented(s, SYS_BUS_DEVICE(&s->iomem), "aspeed.io",
|
|
sc->memmap[ASPEED_DEV_IOMEM],
|
|
ASPEED_SOC_IOMEM_SIZE);
|
|
|
|
/* Video engine stub */
|
|
aspeed_mmio_map_unimplemented(s, SYS_BUS_DEVICE(&s->video), "aspeed.video",
|
|
sc->memmap[ASPEED_DEV_VIDEO], 0x1000);
|
|
|
|
/* CPU */
|
|
for (i = 0; i < sc->num_cpus; i++) {
|
|
object_property_set_link(OBJECT(&s->cpu[i]), "memory",
|
|
OBJECT(s->memory), &error_abort);
|
|
if (!qdev_realize(DEVICE(&s->cpu[i]), NULL, errp)) {
|
|
return;
|
|
}
|
|
}
|
|
|
|
/* SRAM */
|
|
memory_region_init_ram(&s->sram, OBJECT(dev), "aspeed.sram",
|
|
sc->sram_size, &err);
|
|
if (err) {
|
|
error_propagate(errp, err);
|
|
return;
|
|
}
|
|
memory_region_add_subregion(s->memory,
|
|
sc->memmap[ASPEED_DEV_SRAM], &s->sram);
|
|
|
|
/* SCU */
|
|
if (!sysbus_realize(SYS_BUS_DEVICE(&s->scu), errp)) {
|
|
return;
|
|
}
|
|
aspeed_mmio_map(s, SYS_BUS_DEVICE(&s->scu), 0, sc->memmap[ASPEED_DEV_SCU]);
|
|
|
|
/* VIC */
|
|
if (!sysbus_realize(SYS_BUS_DEVICE(&s->vic), errp)) {
|
|
return;
|
|
}
|
|
aspeed_mmio_map(s, SYS_BUS_DEVICE(&s->vic), 0, sc->memmap[ASPEED_DEV_VIC]);
|
|
sysbus_connect_irq(SYS_BUS_DEVICE(&s->vic), 0,
|
|
qdev_get_gpio_in(DEVICE(&s->cpu), ARM_CPU_IRQ));
|
|
sysbus_connect_irq(SYS_BUS_DEVICE(&s->vic), 1,
|
|
qdev_get_gpio_in(DEVICE(&s->cpu), ARM_CPU_FIQ));
|
|
|
|
/* RTC */
|
|
if (!sysbus_realize(SYS_BUS_DEVICE(&s->rtc), errp)) {
|
|
return;
|
|
}
|
|
aspeed_mmio_map(s, SYS_BUS_DEVICE(&s->rtc), 0, sc->memmap[ASPEED_DEV_RTC]);
|
|
sysbus_connect_irq(SYS_BUS_DEVICE(&s->rtc), 0,
|
|
aspeed_soc_get_irq(s, ASPEED_DEV_RTC));
|
|
|
|
/* Timer */
|
|
object_property_set_link(OBJECT(&s->timerctrl), "scu", OBJECT(&s->scu),
|
|
&error_abort);
|
|
if (!sysbus_realize(SYS_BUS_DEVICE(&s->timerctrl), errp)) {
|
|
return;
|
|
}
|
|
aspeed_mmio_map(s, SYS_BUS_DEVICE(&s->timerctrl), 0,
|
|
sc->memmap[ASPEED_DEV_TIMER1]);
|
|
for (i = 0; i < ASPEED_TIMER_NR_TIMERS; i++) {
|
|
qemu_irq irq = aspeed_soc_get_irq(s, ASPEED_DEV_TIMER1 + i);
|
|
sysbus_connect_irq(SYS_BUS_DEVICE(&s->timerctrl), i, irq);
|
|
}
|
|
|
|
/* ADC */
|
|
if (!sysbus_realize(SYS_BUS_DEVICE(&s->adc), errp)) {
|
|
return;
|
|
}
|
|
aspeed_mmio_map(s, SYS_BUS_DEVICE(&s->adc), 0, sc->memmap[ASPEED_DEV_ADC]);
|
|
sysbus_connect_irq(SYS_BUS_DEVICE(&s->adc), 0,
|
|
aspeed_soc_get_irq(s, ASPEED_DEV_ADC));
|
|
|
|
/* UART */
|
|
aspeed_soc_uart_init(s);
|
|
|
|
/* I2C */
|
|
object_property_set_link(OBJECT(&s->i2c), "dram", OBJECT(s->dram_mr),
|
|
&error_abort);
|
|
if (!sysbus_realize(SYS_BUS_DEVICE(&s->i2c), errp)) {
|
|
return;
|
|
}
|
|
aspeed_mmio_map(s, SYS_BUS_DEVICE(&s->i2c), 0, sc->memmap[ASPEED_DEV_I2C]);
|
|
sysbus_connect_irq(SYS_BUS_DEVICE(&s->i2c), 0,
|
|
aspeed_soc_get_irq(s, ASPEED_DEV_I2C));
|
|
|
|
/* PECI */
|
|
if (!sysbus_realize(SYS_BUS_DEVICE(&s->peci), errp)) {
|
|
return;
|
|
}
|
|
aspeed_mmio_map(s, SYS_BUS_DEVICE(&s->peci), 0,
|
|
sc->memmap[ASPEED_DEV_PECI]);
|
|
sysbus_connect_irq(SYS_BUS_DEVICE(&s->peci), 0,
|
|
aspeed_soc_get_irq(s, ASPEED_DEV_PECI));
|
|
|
|
/* FMC, The number of CS is set at the board level */
|
|
object_property_set_link(OBJECT(&s->fmc), "dram", OBJECT(s->dram_mr),
|
|
&error_abort);
|
|
if (!sysbus_realize(SYS_BUS_DEVICE(&s->fmc), errp)) {
|
|
return;
|
|
}
|
|
aspeed_mmio_map(s, SYS_BUS_DEVICE(&s->fmc), 0, sc->memmap[ASPEED_DEV_FMC]);
|
|
aspeed_mmio_map(s, SYS_BUS_DEVICE(&s->fmc), 1,
|
|
ASPEED_SMC_GET_CLASS(&s->fmc)->flash_window_base);
|
|
sysbus_connect_irq(SYS_BUS_DEVICE(&s->fmc), 0,
|
|
aspeed_soc_get_irq(s, ASPEED_DEV_FMC));
|
|
|
|
/* SPI */
|
|
for (i = 0; i < sc->spis_num; i++) {
|
|
if (!sysbus_realize(SYS_BUS_DEVICE(&s->spi[i]), errp)) {
|
|
return;
|
|
}
|
|
aspeed_mmio_map(s, SYS_BUS_DEVICE(&s->spi[i]), 0,
|
|
sc->memmap[ASPEED_DEV_SPI1 + i]);
|
|
aspeed_mmio_map(s, SYS_BUS_DEVICE(&s->spi[i]), 1,
|
|
ASPEED_SMC_GET_CLASS(&s->spi[i])->flash_window_base);
|
|
}
|
|
|
|
/* EHCI */
|
|
for (i = 0; i < sc->ehcis_num; i++) {
|
|
if (!sysbus_realize(SYS_BUS_DEVICE(&s->ehci[i]), errp)) {
|
|
return;
|
|
}
|
|
aspeed_mmio_map(s, SYS_BUS_DEVICE(&s->ehci[i]), 0,
|
|
sc->memmap[ASPEED_DEV_EHCI1 + i]);
|
|
sysbus_connect_irq(SYS_BUS_DEVICE(&s->ehci[i]), 0,
|
|
aspeed_soc_get_irq(s, ASPEED_DEV_EHCI1 + i));
|
|
}
|
|
|
|
/* SDMC - SDRAM Memory Controller */
|
|
if (!sysbus_realize(SYS_BUS_DEVICE(&s->sdmc), errp)) {
|
|
return;
|
|
}
|
|
aspeed_mmio_map(s, SYS_BUS_DEVICE(&s->sdmc), 0,
|
|
sc->memmap[ASPEED_DEV_SDMC]);
|
|
|
|
/* Watch dog */
|
|
for (i = 0; i < sc->wdts_num; i++) {
|
|
AspeedWDTClass *awc = ASPEED_WDT_GET_CLASS(&s->wdt[i]);
|
|
|
|
object_property_set_link(OBJECT(&s->wdt[i]), "scu", OBJECT(&s->scu),
|
|
&error_abort);
|
|
if (!sysbus_realize(SYS_BUS_DEVICE(&s->wdt[i]), errp)) {
|
|
return;
|
|
}
|
|
aspeed_mmio_map(s, SYS_BUS_DEVICE(&s->wdt[i]), 0,
|
|
sc->memmap[ASPEED_DEV_WDT] + i * awc->offset);
|
|
}
|
|
|
|
/* RAM */
|
|
if (!aspeed_soc_dram_init(s, errp)) {
|
|
return;
|
|
}
|
|
|
|
/* Net */
|
|
for (i = 0; i < sc->macs_num; i++) {
|
|
object_property_set_bool(OBJECT(&s->ftgmac100[i]), "aspeed", true,
|
|
&error_abort);
|
|
if (!sysbus_realize(SYS_BUS_DEVICE(&s->ftgmac100[i]), errp)) {
|
|
return;
|
|
}
|
|
aspeed_mmio_map(s, SYS_BUS_DEVICE(&s->ftgmac100[i]), 0,
|
|
sc->memmap[ASPEED_DEV_ETH1 + i]);
|
|
sysbus_connect_irq(SYS_BUS_DEVICE(&s->ftgmac100[i]), 0,
|
|
aspeed_soc_get_irq(s, ASPEED_DEV_ETH1 + i));
|
|
}
|
|
|
|
/* XDMA */
|
|
if (!sysbus_realize(SYS_BUS_DEVICE(&s->xdma), errp)) {
|
|
return;
|
|
}
|
|
aspeed_mmio_map(s, SYS_BUS_DEVICE(&s->xdma), 0,
|
|
sc->memmap[ASPEED_DEV_XDMA]);
|
|
sysbus_connect_irq(SYS_BUS_DEVICE(&s->xdma), 0,
|
|
aspeed_soc_get_irq(s, ASPEED_DEV_XDMA));
|
|
|
|
/* GPIO */
|
|
if (!sysbus_realize(SYS_BUS_DEVICE(&s->gpio), errp)) {
|
|
return;
|
|
}
|
|
aspeed_mmio_map(s, SYS_BUS_DEVICE(&s->gpio), 0,
|
|
sc->memmap[ASPEED_DEV_GPIO]);
|
|
sysbus_connect_irq(SYS_BUS_DEVICE(&s->gpio), 0,
|
|
aspeed_soc_get_irq(s, ASPEED_DEV_GPIO));
|
|
|
|
/* SDHCI */
|
|
if (!sysbus_realize(SYS_BUS_DEVICE(&s->sdhci), errp)) {
|
|
return;
|
|
}
|
|
aspeed_mmio_map(s, SYS_BUS_DEVICE(&s->sdhci), 0,
|
|
sc->memmap[ASPEED_DEV_SDHCI]);
|
|
sysbus_connect_irq(SYS_BUS_DEVICE(&s->sdhci), 0,
|
|
aspeed_soc_get_irq(s, ASPEED_DEV_SDHCI));
|
|
|
|
/* LPC */
|
|
if (!sysbus_realize(SYS_BUS_DEVICE(&s->lpc), errp)) {
|
|
return;
|
|
}
|
|
aspeed_mmio_map(s, SYS_BUS_DEVICE(&s->lpc), 0, sc->memmap[ASPEED_DEV_LPC]);
|
|
|
|
/* Connect the LPC IRQ to the VIC */
|
|
sysbus_connect_irq(SYS_BUS_DEVICE(&s->lpc), 0,
|
|
aspeed_soc_get_irq(s, ASPEED_DEV_LPC));
|
|
|
|
/*
|
|
* On the AST2400 and AST2500 the one LPC IRQ is shared between all of the
|
|
* subdevices. Connect the LPC subdevice IRQs to the LPC controller IRQ (by
|
|
* contrast, on the AST2600, the subdevice IRQs are connected straight to
|
|
* the GIC).
|
|
*
|
|
* LPC subdevice IRQ sources are offset from 1 because the shared IRQ output
|
|
* to the VIC is at offset 0.
|
|
*/
|
|
sysbus_connect_irq(SYS_BUS_DEVICE(&s->lpc), 1 + aspeed_lpc_kcs_1,
|
|
qdev_get_gpio_in(DEVICE(&s->lpc), aspeed_lpc_kcs_1));
|
|
|
|
sysbus_connect_irq(SYS_BUS_DEVICE(&s->lpc), 1 + aspeed_lpc_kcs_2,
|
|
qdev_get_gpio_in(DEVICE(&s->lpc), aspeed_lpc_kcs_2));
|
|
|
|
sysbus_connect_irq(SYS_BUS_DEVICE(&s->lpc), 1 + aspeed_lpc_kcs_3,
|
|
qdev_get_gpio_in(DEVICE(&s->lpc), aspeed_lpc_kcs_3));
|
|
|
|
sysbus_connect_irq(SYS_BUS_DEVICE(&s->lpc), 1 + aspeed_lpc_kcs_4,
|
|
qdev_get_gpio_in(DEVICE(&s->lpc), aspeed_lpc_kcs_4));
|
|
|
|
/* HACE */
|
|
object_property_set_link(OBJECT(&s->hace), "dram", OBJECT(s->dram_mr),
|
|
&error_abort);
|
|
if (!sysbus_realize(SYS_BUS_DEVICE(&s->hace), errp)) {
|
|
return;
|
|
}
|
|
aspeed_mmio_map(s, SYS_BUS_DEVICE(&s->hace), 0,
|
|
sc->memmap[ASPEED_DEV_HACE]);
|
|
sysbus_connect_irq(SYS_BUS_DEVICE(&s->hace), 0,
|
|
aspeed_soc_get_irq(s, ASPEED_DEV_HACE));
|
|
}
|
|
static Property aspeed_soc_properties[] = {
|
|
DEFINE_PROP_LINK("memory", AspeedSoCState, memory, TYPE_MEMORY_REGION,
|
|
MemoryRegion *),
|
|
DEFINE_PROP_LINK("dram", AspeedSoCState, dram_mr, TYPE_MEMORY_REGION,
|
|
MemoryRegion *),
|
|
DEFINE_PROP_UINT32("uart-default", AspeedSoCState, uart_default,
|
|
ASPEED_DEV_UART5),
|
|
DEFINE_PROP_END_OF_LIST(),
|
|
};
|
|
|
|
static void aspeed_soc_class_init(ObjectClass *oc, void *data)
|
|
{
|
|
DeviceClass *dc = DEVICE_CLASS(oc);
|
|
|
|
dc->realize = aspeed_soc_realize;
|
|
/* Reason: Uses serial_hds and nd_table in realize() directly */
|
|
dc->user_creatable = false;
|
|
device_class_set_props(dc, aspeed_soc_properties);
|
|
}
|
|
|
|
static const TypeInfo aspeed_soc_type_info = {
|
|
.name = TYPE_ASPEED_SOC,
|
|
.parent = TYPE_DEVICE,
|
|
.instance_size = sizeof(AspeedSoCState),
|
|
.class_size = sizeof(AspeedSoCClass),
|
|
.class_init = aspeed_soc_class_init,
|
|
.abstract = true,
|
|
};
|
|
|
|
static void aspeed_soc_ast2400_class_init(ObjectClass *oc, void *data)
|
|
{
|
|
AspeedSoCClass *sc = ASPEED_SOC_CLASS(oc);
|
|
|
|
sc->name = "ast2400-a1";
|
|
sc->cpu_type = ARM_CPU_TYPE_NAME("arm926");
|
|
sc->silicon_rev = AST2400_A1_SILICON_REV;
|
|
sc->sram_size = 0x8000;
|
|
sc->spis_num = 1;
|
|
sc->ehcis_num = 1;
|
|
sc->wdts_num = 2;
|
|
sc->macs_num = 2;
|
|
sc->uarts_num = 5;
|
|
sc->irqmap = aspeed_soc_ast2400_irqmap;
|
|
sc->memmap = aspeed_soc_ast2400_memmap;
|
|
sc->num_cpus = 1;
|
|
sc->get_irq = aspeed_soc_ast2400_get_irq;
|
|
}
|
|
|
|
static const TypeInfo aspeed_soc_ast2400_type_info = {
|
|
.name = "ast2400-a1",
|
|
.parent = TYPE_ASPEED_SOC,
|
|
.instance_init = aspeed_soc_init,
|
|
.instance_size = sizeof(AspeedSoCState),
|
|
.class_init = aspeed_soc_ast2400_class_init,
|
|
};
|
|
|
|
static void aspeed_soc_ast2500_class_init(ObjectClass *oc, void *data)
|
|
{
|
|
AspeedSoCClass *sc = ASPEED_SOC_CLASS(oc);
|
|
|
|
sc->name = "ast2500-a1";
|
|
sc->cpu_type = ARM_CPU_TYPE_NAME("arm1176");
|
|
sc->silicon_rev = AST2500_A1_SILICON_REV;
|
|
sc->sram_size = 0x9000;
|
|
sc->spis_num = 2;
|
|
sc->ehcis_num = 2;
|
|
sc->wdts_num = 3;
|
|
sc->macs_num = 2;
|
|
sc->uarts_num = 5;
|
|
sc->irqmap = aspeed_soc_ast2500_irqmap;
|
|
sc->memmap = aspeed_soc_ast2500_memmap;
|
|
sc->num_cpus = 1;
|
|
sc->get_irq = aspeed_soc_ast2400_get_irq;
|
|
}
|
|
|
|
static const TypeInfo aspeed_soc_ast2500_type_info = {
|
|
.name = "ast2500-a1",
|
|
.parent = TYPE_ASPEED_SOC,
|
|
.instance_init = aspeed_soc_init,
|
|
.instance_size = sizeof(AspeedSoCState),
|
|
.class_init = aspeed_soc_ast2500_class_init,
|
|
};
|
|
static void aspeed_soc_register_types(void)
|
|
{
|
|
type_register_static(&aspeed_soc_type_info);
|
|
type_register_static(&aspeed_soc_ast2400_type_info);
|
|
type_register_static(&aspeed_soc_ast2500_type_info);
|
|
};
|
|
|
|
type_init(aspeed_soc_register_types);
|
|
|
|
qemu_irq aspeed_soc_get_irq(AspeedSoCState *s, int dev)
|
|
{
|
|
return ASPEED_SOC_GET_CLASS(s)->get_irq(s, dev);
|
|
}
|
|
|
|
void aspeed_soc_uart_init(AspeedSoCState *s)
|
|
{
|
|
AspeedSoCClass *sc = ASPEED_SOC_GET_CLASS(s);
|
|
int i, uart;
|
|
|
|
/* Attach an 8250 to the IO space as our UART */
|
|
serial_mm_init(s->memory, sc->memmap[s->uart_default], 2,
|
|
aspeed_soc_get_irq(s, s->uart_default), 38400,
|
|
serial_hd(0), DEVICE_LITTLE_ENDIAN);
|
|
for (i = 1, uart = ASPEED_DEV_UART1; i < sc->uarts_num; i++, uart++) {
|
|
if (uart == s->uart_default) {
|
|
uart++;
|
|
}
|
|
serial_mm_init(s->memory, sc->memmap[uart], 2,
|
|
aspeed_soc_get_irq(s, uart), 38400,
|
|
serial_hd(i), DEVICE_LITTLE_ENDIAN);
|
|
}
|
|
}
|
|
|
|
/*
|
|
* SDMC should be realized first to get correct RAM size and max size
|
|
* values
|
|
*/
|
|
bool aspeed_soc_dram_init(AspeedSoCState *s, Error **errp)
|
|
{
|
|
AspeedSoCClass *sc = ASPEED_SOC_GET_CLASS(s);
|
|
ram_addr_t ram_size, max_ram_size;
|
|
|
|
ram_size = object_property_get_uint(OBJECT(&s->sdmc), "ram-size",
|
|
&error_abort);
|
|
max_ram_size = object_property_get_uint(OBJECT(&s->sdmc), "max-ram-size",
|
|
&error_abort);
|
|
|
|
memory_region_init(&s->dram_container, OBJECT(s), "ram-container",
|
|
max_ram_size);
|
|
memory_region_add_subregion(&s->dram_container, 0, s->dram_mr);
|
|
|
|
/*
|
|
* Add a memory region beyond the RAM region to let firmwares scan
|
|
* the address space with load/store and guess how much RAM the
|
|
* SoC has.
|
|
*/
|
|
if (ram_size < max_ram_size) {
|
|
DeviceState *dev = qdev_new(TYPE_UNIMPLEMENTED_DEVICE);
|
|
|
|
qdev_prop_set_string(dev, "name", "ram-empty");
|
|
qdev_prop_set_uint64(dev, "size", max_ram_size - ram_size);
|
|
if (!sysbus_realize_and_unref(SYS_BUS_DEVICE(dev), errp)) {
|
|
return false;
|
|
}
|
|
|
|
memory_region_add_subregion_overlap(&s->dram_container, ram_size,
|
|
sysbus_mmio_get_region(SYS_BUS_DEVICE(dev), 0), -1000);
|
|
}
|
|
|
|
memory_region_add_subregion(s->memory,
|
|
sc->memmap[ASPEED_DEV_SDRAM], &s->dram_container);
|
|
return true;
|
|
}
|
|
|
|
void aspeed_mmio_map(AspeedSoCState *s, SysBusDevice *dev, int n, hwaddr addr)
|
|
{
|
|
memory_region_add_subregion(s->memory, addr,
|
|
sysbus_mmio_get_region(dev, n));
|
|
}
|
|
|
|
void aspeed_mmio_map_unimplemented(AspeedSoCState *s, SysBusDevice *dev,
|
|
const char *name, hwaddr addr, uint64_t size)
|
|
{
|
|
qdev_prop_set_string(DEVICE(dev), "name", name);
|
|
qdev_prop_set_uint64(DEVICE(dev), "size", size);
|
|
sysbus_realize(dev, &error_abort);
|
|
|
|
memory_region_add_subregion_overlap(s->memory, addr,
|
|
sysbus_mmio_get_region(dev, 0), -1000);
|
|
}
|