mirror of
https://github.com/xemu-project/xemu.git
synced 2024-11-25 12:40:08 +00:00
414e9ae345
The premise behind the original behavior is that it would save people
from downloading Avocado (and other dependencies) if already installed
on the system. To be honest, I think it's extremely rare that the
same versions described as dependencies will be available on most
systems. But, the biggest motivations here are that:
1) Hacking on QEMU in the same system used to develop Avocado leads
to confusion with regards to the exact bits that are being used;
2) Not reusing Python packages from system wide installations gives
extra assurance that the same behavior will be seen from tests run
on different machines;
With regards to downloads, pip already caches the downloaded wheels
and tarballs under ~/.cache/pip, so there should not be more than
one download even if the venv is destroyed and recreated.
Signed-off-by: Cleber Rosa <crosa@redhat.com>
Message-Id: <20210415215141.1865467-3-crosa@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Willian Rampazzo <willianr@redhat.com>
Reviewed-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
Signed-off-by: Cleber Rosa <crosa@redhat.com>
159 lines
5.7 KiB
Makefile
159 lines
5.7 KiB
Makefile
# -*- Mode: makefile -*-
|
|
|
|
.PHONY: check-help
|
|
check-help:
|
|
@echo "Regression testing targets:"
|
|
@echo " $(MAKE) check Run block, qapi-schema, unit, softfloat, qtest and decodetree tests"
|
|
@echo " $(MAKE) bench Run speed tests"
|
|
@echo
|
|
@echo "Individual test suites:"
|
|
@echo " $(MAKE) check-qtest-TARGET Run qtest tests for given target"
|
|
@echo " $(MAKE) check-qtest Run qtest tests"
|
|
@echo " $(MAKE) check-unit Run qobject tests"
|
|
@echo " $(MAKE) check-qapi-schema Run QAPI schema tests"
|
|
@echo " $(MAKE) check-block Run block tests"
|
|
ifneq ($(filter $(all-check-targets), check-softfloat),)
|
|
@echo " $(MAKE) check-tcg Run TCG tests"
|
|
@echo " $(MAKE) check-softfloat Run FPU emulation tests"
|
|
endif
|
|
@echo " $(MAKE) check-acceptance Run all acceptance (functional) tests"
|
|
@echo
|
|
@echo " $(MAKE) check-report.tap Generates an aggregated TAP test report"
|
|
@echo " $(MAKE) check-venv Creates a Python venv for tests"
|
|
@echo " $(MAKE) check-clean Clean the tests and related data"
|
|
@echo
|
|
@echo "The following are useful for CI builds"
|
|
@echo " $(MAKE) check-build Build most test binaris"
|
|
@echo " $(MAKE) get-vm-images Downloads all images used by acceptance tests, according to configured targets (~350 MB each, 1.5 GB max)"
|
|
@echo
|
|
@echo
|
|
@echo "The variable SPEED can be set to control the gtester speed setting."
|
|
@echo "Default options are -k and (for $(MAKE) V=1) --verbose; they can be"
|
|
@echo "changed with variable GTESTER_OPTIONS."
|
|
|
|
ifneq ($(wildcard config-host.mak),)
|
|
export SRC_PATH
|
|
|
|
# Get the list of all supported sysemu targets
|
|
SYSEMU_TARGET_LIST := $(subst -softmmu.mak,,$(notdir \
|
|
$(wildcard $(SRC_PATH)/configs/*-softmmu.mak)))
|
|
|
|
SPEED = quick
|
|
|
|
# Build up our target list from the filtered list of ninja targets
|
|
TARGETS=$(patsubst libqemu-%.fa, %, $(filter libqemu-%.fa, $(ninja-targets)))
|
|
|
|
# Per guest TCG tests
|
|
BUILD_TCG_TARGET_RULES=$(patsubst %,build-tcg-tests-%, $(TARGETS))
|
|
CLEAN_TCG_TARGET_RULES=$(patsubst %,clean-tcg-tests-%, $(TARGETS))
|
|
RUN_TCG_TARGET_RULES=$(patsubst %,run-tcg-tests-%, $(TARGETS))
|
|
|
|
# Probe for the Docker Builds needed for each build
|
|
$(foreach PROBE_TARGET,$(TARGET_DIRS), \
|
|
$(eval -include $(SRC_PATH)/tests/tcg/Makefile.prereqs))
|
|
|
|
$(BUILD_TCG_TARGET_RULES): build-tcg-tests-%: $(if $(CONFIG_PLUGIN),test-plugins)
|
|
$(call quiet-command,$(MAKE) $(SUBDIR_MAKEFLAGS) \
|
|
-f $(SRC_PATH)/tests/tcg/Makefile.qemu \
|
|
SRC_PATH=$(SRC_PATH) \
|
|
V="$(V)" TARGET="$*" guest-tests, \
|
|
"BUILD", "TCG tests for $*")
|
|
|
|
$(RUN_TCG_TARGET_RULES): run-tcg-tests-%: build-tcg-tests-% all
|
|
$(call quiet-command,$(MAKE) $(SUBDIR_MAKEFLAGS) \
|
|
-f $(SRC_PATH)/tests/tcg/Makefile.qemu \
|
|
SRC_PATH=$(SRC_PATH) SPEED="$(SPEED)" \
|
|
V="$(V)" TARGET="$*" run-guest-tests, \
|
|
"RUN", "TCG tests for $*")
|
|
|
|
$(CLEAN_TCG_TARGET_RULES): clean-tcg-tests-%:
|
|
$(call quiet-command,$(MAKE) $(SUBDIR_MAKEFLAGS) \
|
|
-f $(SRC_PATH)/tests/tcg/Makefile.qemu \
|
|
SRC_PATH=$(SRC_PATH) TARGET="$*" clean-guest-tests, \
|
|
"CLEAN", "TCG tests for $*")
|
|
|
|
.PHONY: build-tcg
|
|
build-tcg: $(BUILD_TCG_TARGET_RULES)
|
|
|
|
.PHONY: check-tcg
|
|
check-tcg: $(RUN_TCG_TARGET_RULES)
|
|
|
|
.PHONY: clean-tcg
|
|
clean-tcg: $(CLEAN_TCG_TARGET_RULES)
|
|
|
|
# Python venv for running tests
|
|
|
|
.PHONY: check-venv check-acceptance
|
|
|
|
TESTS_VENV_DIR=$(BUILD_DIR)/tests/venv
|
|
TESTS_VENV_REQ=$(SRC_PATH)/tests/requirements.txt
|
|
TESTS_RESULTS_DIR=$(BUILD_DIR)/tests/results
|
|
# Controls the output generated by Avocado when running tests.
|
|
# Any number of command separated loggers are accepted. For more
|
|
# information please refer to "avocado --help".
|
|
AVOCADO_SHOW=app
|
|
AVOCADO_TAGS=$(patsubst %-softmmu,-t arch:%, $(filter %-softmmu,$(TARGETS)))
|
|
|
|
$(TESTS_VENV_DIR): $(TESTS_VENV_REQ)
|
|
$(call quiet-command, \
|
|
$(PYTHON) -m venv $@, \
|
|
VENV, $@)
|
|
$(call quiet-command, \
|
|
$(TESTS_VENV_DIR)/bin/python -m pip -q install -r $(TESTS_VENV_REQ), \
|
|
PIP, $(TESTS_VENV_REQ))
|
|
$(call quiet-command, touch $@)
|
|
|
|
$(TESTS_RESULTS_DIR):
|
|
$(call quiet-command, mkdir -p $@, \
|
|
MKDIR, $@)
|
|
|
|
check-venv: $(TESTS_VENV_DIR)
|
|
|
|
FEDORA_31_ARCHES_TARGETS=$(patsubst %-softmmu,%, $(filter %-softmmu,$(TARGETS)))
|
|
FEDORA_31_ARCHES_CANDIDATES=$(patsubst ppc64,ppc64le,$(FEDORA_31_ARCHES_TARGETS))
|
|
FEDORA_31_ARCHES := x86_64 aarch64 ppc64le s390x
|
|
FEDORA_31_DOWNLOAD=$(filter $(FEDORA_31_ARCHES),$(FEDORA_31_ARCHES_CANDIDATES))
|
|
|
|
# download one specific Fedora 31 image
|
|
get-vm-image-fedora-31-%: check-venv
|
|
$(call quiet-command, \
|
|
$(TESTS_VENV_DIR)/bin/python -m avocado vmimage get \
|
|
--distro=fedora --distro-version=31 --arch=$*, \
|
|
"AVOCADO", "Downloading acceptance tests VM image for $*")
|
|
|
|
# download all vm images, according to defined targets
|
|
get-vm-images: check-venv $(patsubst %,get-vm-image-fedora-31-%, $(FEDORA_31_DOWNLOAD))
|
|
|
|
check-acceptance: check-venv $(TESTS_RESULTS_DIR) get-vm-images
|
|
$(call quiet-command, \
|
|
$(TESTS_VENV_DIR)/bin/python -m avocado \
|
|
--show=$(AVOCADO_SHOW) run --job-results-dir=$(TESTS_RESULTS_DIR) \
|
|
--filter-by-tags-include-empty --filter-by-tags-include-empty-key \
|
|
$(AVOCADO_TAGS) \
|
|
$(if $(GITLAB_CI),,--failfast) tests/acceptance, \
|
|
"AVOCADO", "tests/acceptance")
|
|
|
|
# Consolidated targets
|
|
|
|
.PHONY: check-block check check-clean get-vm-images
|
|
check:
|
|
|
|
ifeq ($(CONFIG_TOOLS)$(CONFIG_POSIX),yy)
|
|
QEMU_IOTESTS_HELPERS-$(CONFIG_LINUX) = tests/qemu-iotests/socket_scm_helper$(EXESUF)
|
|
check: check-block
|
|
export PYTHON
|
|
check-block: $(SRC_PATH)/tests/check-block.sh qemu-img$(EXESUF) \
|
|
qemu-io$(EXESUF) qemu-nbd$(EXESUF) $(QEMU_IOTESTS_HELPERS-y) \
|
|
$(filter qemu-system-%, $(ninja-targets))
|
|
@$<
|
|
endif
|
|
|
|
check-build: $(QEMU_IOTESTS_HELPERS-y)
|
|
|
|
check-clean:
|
|
rm -rf $(TESTS_VENV_DIR) $(TESTS_RESULTS_DIR)
|
|
|
|
clean: check-clean
|
|
|
|
endif
|