xemu/hw/virtio-balloon.c
Amit Shah 3b86b13ab0 virtio-balloon: Disassociate from the balloon handlers on unplug
Adding a 2nd balloon device after unplugging the first one doesn't work.
Also, the 'info balloon' command should indicate an error mentioning no
balloon device is registered after unplug.

Reproduction steps given by Shaolong Hu:

(qemu) info balloon
Device 'balloon' has not been activated by the guest
(qemu) device_add virtio-balloon-pci,id=balloon1
(qemu) info balloon
balloon: actual=4096
(qemu) balloon 2048
(qemu) info balloon
balloon: actual=2048
(qemu) device_del balloon1
(qemu) info balloon
balloon: actual=4096
(qemu) balloon 2048
(qemu) info balloon
balloon: actual=4096
(qemu) device_del balloon1
Device 'balloon1' not found
(qemu) device_add virtio-balloon-pci,id=balloon1
Another balloon device already registered
Device 'virtio-balloon-pci' could not be initialized
(qemu) device_add virtio-balloon-pci,id=balloon2
Another balloon device already registered
Device 'virtio-balloon-pci' could not be initialized

Reported-by: Shaolong Hu <shu@redhat.com>
Signed-off-by: Amit Shah <amit.shah@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2011-09-09 12:58:16 -05:00

311 lines
8.5 KiB
C

/*
* Virtio Balloon Device
*
* Copyright IBM, Corp. 2008
* Copyright (C) 2011 Red Hat, Inc.
* Copyright (C) 2011 Amit Shah <amit.shah@redhat.com>
*
* Authors:
* Anthony Liguori <aliguori@us.ibm.com>
*
* This work is licensed under the terms of the GNU GPL, version 2. See
* the COPYING file in the top-level directory.
*
*/
#include "iov.h"
#include "qemu-common.h"
#include "virtio.h"
#include "pc.h"
#include "cpu.h"
#include "monitor.h"
#include "balloon.h"
#include "virtio-balloon.h"
#include "kvm.h"
#include "qlist.h"
#include "qint.h"
#include "qstring.h"
#if defined(__linux__)
#include <sys/mman.h>
#endif
/* Disable guest-provided stats by now (https://bugzilla.redhat.com/show_bug.cgi?id=623903) */
#define ENABLE_GUEST_STATS 0
typedef struct VirtIOBalloon
{
VirtIODevice vdev;
VirtQueue *ivq, *dvq, *svq;
uint32_t num_pages;
uint32_t actual;
uint64_t stats[VIRTIO_BALLOON_S_NR];
VirtQueueElement stats_vq_elem;
size_t stats_vq_offset;
MonitorCompletion *stats_callback;
void *stats_opaque_callback_data;
DeviceState *qdev;
} VirtIOBalloon;
static VirtIOBalloon *to_virtio_balloon(VirtIODevice *vdev)
{
return (VirtIOBalloon *)vdev;
}
static void balloon_page(void *addr, int deflate)
{
#if defined(__linux__)
if (!kvm_enabled() || kvm_has_sync_mmu())
qemu_madvise(addr, TARGET_PAGE_SIZE,
deflate ? QEMU_MADV_WILLNEED : QEMU_MADV_DONTNEED);
#endif
}
/*
* reset_stats - Mark all items in the stats array as unset
*
* This function needs to be called at device intialization and before
* before updating to a set of newly-generated stats. This will ensure that no
* stale values stick around in case the guest reports a subset of the supported
* statistics.
*/
static inline void reset_stats(VirtIOBalloon *dev)
{
int i;
for (i = 0; i < VIRTIO_BALLOON_S_NR; dev->stats[i++] = -1);
}
static void stat_put(QDict *dict, const char *label, uint64_t val)
{
if (val != -1)
qdict_put(dict, label, qint_from_int(val));
}
static QObject *get_stats_qobject(VirtIOBalloon *dev)
{
QDict *dict = qdict_new();
uint64_t actual = ram_size - ((uint64_t) dev->actual <<
VIRTIO_BALLOON_PFN_SHIFT);
stat_put(dict, "actual", actual);
#if ENABLE_GUEST_STATS
stat_put(dict, "mem_swapped_in", dev->stats[VIRTIO_BALLOON_S_SWAP_IN]);
stat_put(dict, "mem_swapped_out", dev->stats[VIRTIO_BALLOON_S_SWAP_OUT]);
stat_put(dict, "major_page_faults", dev->stats[VIRTIO_BALLOON_S_MAJFLT]);
stat_put(dict, "minor_page_faults", dev->stats[VIRTIO_BALLOON_S_MINFLT]);
stat_put(dict, "free_mem", dev->stats[VIRTIO_BALLOON_S_MEMFREE]);
stat_put(dict, "total_mem", dev->stats[VIRTIO_BALLOON_S_MEMTOT]);
#endif
return QOBJECT(dict);
}
static void virtio_balloon_handle_output(VirtIODevice *vdev, VirtQueue *vq)
{
VirtIOBalloon *s = to_virtio_balloon(vdev);
VirtQueueElement elem;
while (virtqueue_pop(vq, &elem)) {
size_t offset = 0;
uint32_t pfn;
while (iov_to_buf(elem.out_sg, elem.out_num, &pfn, offset, 4) == 4) {
ram_addr_t pa;
ram_addr_t addr;
pa = (ram_addr_t)ldl_p(&pfn) << VIRTIO_BALLOON_PFN_SHIFT;
offset += 4;
addr = cpu_get_physical_page_desc(pa);
if ((addr & ~TARGET_PAGE_MASK) != IO_MEM_RAM)
continue;
/* Using qemu_get_ram_ptr is bending the rules a bit, but
should be OK because we only want a single page. */
balloon_page(qemu_get_ram_ptr(addr), !!(vq == s->dvq));
}
virtqueue_push(vq, &elem, offset);
virtio_notify(vdev, vq);
}
}
static void complete_stats_request(VirtIOBalloon *vb)
{
QObject *stats;
if (!vb->stats_opaque_callback_data)
return;
stats = get_stats_qobject(vb);
vb->stats_callback(vb->stats_opaque_callback_data, stats);
qobject_decref(stats);
vb->stats_opaque_callback_data = NULL;
vb->stats_callback = NULL;
}
static void virtio_balloon_receive_stats(VirtIODevice *vdev, VirtQueue *vq)
{
VirtIOBalloon *s = DO_UPCAST(VirtIOBalloon, vdev, vdev);
VirtQueueElement *elem = &s->stats_vq_elem;
VirtIOBalloonStat stat;
size_t offset = 0;
if (!virtqueue_pop(vq, elem)) {
return;
}
/* Initialize the stats to get rid of any stale values. This is only
* needed to handle the case where a guest supports fewer stats than it
* used to (ie. it has booted into an old kernel).
*/
reset_stats(s);
while (iov_to_buf(elem->out_sg, elem->out_num, &stat, offset, sizeof(stat))
== sizeof(stat)) {
uint16_t tag = tswap16(stat.tag);
uint64_t val = tswap64(stat.val);
offset += sizeof(stat);
if (tag < VIRTIO_BALLOON_S_NR)
s->stats[tag] = val;
}
s->stats_vq_offset = offset;
complete_stats_request(s);
}
static void virtio_balloon_get_config(VirtIODevice *vdev, uint8_t *config_data)
{
VirtIOBalloon *dev = to_virtio_balloon(vdev);
struct virtio_balloon_config config;
config.num_pages = cpu_to_le32(dev->num_pages);
config.actual = cpu_to_le32(dev->actual);
memcpy(config_data, &config, 8);
}
static void virtio_balloon_set_config(VirtIODevice *vdev,
const uint8_t *config_data)
{
VirtIOBalloon *dev = to_virtio_balloon(vdev);
struct virtio_balloon_config config;
memcpy(&config, config_data, 8);
dev->actual = le32_to_cpu(config.actual);
}
static uint32_t virtio_balloon_get_features(VirtIODevice *vdev, uint32_t f)
{
f |= (1 << VIRTIO_BALLOON_F_STATS_VQ);
return f;
}
static void virtio_balloon_stat(void *opaque, MonitorCompletion cb,
void *cb_data)
{
VirtIOBalloon *dev = opaque;
/* For now, only allow one request at a time. This restriction can be
* removed later by queueing callback and data pairs.
*/
if (dev->stats_callback != NULL) {
return;
}
dev->stats_callback = cb;
dev->stats_opaque_callback_data = cb_data;
if (ENABLE_GUEST_STATS
&& (dev->vdev.guest_features & (1 << VIRTIO_BALLOON_F_STATS_VQ))) {
virtqueue_push(dev->svq, &dev->stats_vq_elem, dev->stats_vq_offset);
virtio_notify(&dev->vdev, dev->svq);
return;
}
/* Stats are not supported. Clear out any stale values that might
* have been set by a more featureful guest kernel.
*/
reset_stats(dev);
complete_stats_request(dev);
}
static void virtio_balloon_to_target(void *opaque, ram_addr_t target)
{
VirtIOBalloon *dev = opaque;
if (target > ram_size) {
target = ram_size;
}
if (target) {
dev->num_pages = (ram_size - target) >> VIRTIO_BALLOON_PFN_SHIFT;
virtio_notify_config(&dev->vdev);
}
}
static void virtio_balloon_save(QEMUFile *f, void *opaque)
{
VirtIOBalloon *s = opaque;
virtio_save(&s->vdev, f);
qemu_put_be32(f, s->num_pages);
qemu_put_be32(f, s->actual);
}
static int virtio_balloon_load(QEMUFile *f, void *opaque, int version_id)
{
VirtIOBalloon *s = opaque;
if (version_id != 1)
return -EINVAL;
virtio_load(&s->vdev, f);
s->num_pages = qemu_get_be32(f);
s->actual = qemu_get_be32(f);
return 0;
}
VirtIODevice *virtio_balloon_init(DeviceState *dev)
{
VirtIOBalloon *s;
int ret;
s = (VirtIOBalloon *)virtio_common_init("virtio-balloon",
VIRTIO_ID_BALLOON,
8, sizeof(VirtIOBalloon));
s->vdev.get_config = virtio_balloon_get_config;
s->vdev.set_config = virtio_balloon_set_config;
s->vdev.get_features = virtio_balloon_get_features;
ret = qemu_add_balloon_handler(virtio_balloon_to_target,
virtio_balloon_stat, s);
if (ret < 0) {
virtio_cleanup(&s->vdev);
return NULL;
}
s->ivq = virtio_add_queue(&s->vdev, 128, virtio_balloon_handle_output);
s->dvq = virtio_add_queue(&s->vdev, 128, virtio_balloon_handle_output);
s->svq = virtio_add_queue(&s->vdev, 128, virtio_balloon_receive_stats);
reset_stats(s);
s->qdev = dev;
register_savevm(dev, "virtio-balloon", -1, 1,
virtio_balloon_save, virtio_balloon_load, s);
return &s->vdev;
}
void virtio_balloon_exit(VirtIODevice *vdev)
{
VirtIOBalloon *s = DO_UPCAST(VirtIOBalloon, vdev, vdev);
qemu_remove_balloon_handler(s);
unregister_savevm(s->qdev, "virtio-balloon", s);
virtio_cleanup(vdev);
}