mirror of
https://github.com/xemu-project/xemu.git
synced 2024-11-24 12:09:58 +00:00
9f08349345
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@2232 c046a42c-6fe2-441c-8c8c-71466251a162
151 lines
4.8 KiB
Plaintext
151 lines
4.8 KiB
Plaintext
qemu target: sh4
|
|
author: Samuel Tardieu <sam@rfc1149.net>
|
|
last modified: Tue Dec 6 07:22:44 CET 2005
|
|
|
|
The sh4 target is not ready at all yet for integration in qemu. This
|
|
file describes the current state of implementation.
|
|
|
|
Most places requiring attention and/or modification can be detected by
|
|
looking for "XXXXX" or "assert (0)".
|
|
|
|
The sh4 core is located in target-sh4/*, while the 7750 peripheral
|
|
features (IO ports for example) are located in hw/sh7750.[ch]. The
|
|
main board description is in hw/shix.c, and the NAND flash in
|
|
hw/tc58128.[ch].
|
|
|
|
All the shortcomings indicated here will eventually be resolved. This
|
|
is a work in progress. Features are added in a semi-random order: if a
|
|
point is blocking to progress on booting the Linux kernel for the shix
|
|
board, it is addressed first; if feedback is necessary and no progress
|
|
can be made on blocking points until it is received, a random feature
|
|
is worked on.
|
|
|
|
Goals
|
|
-----
|
|
|
|
The primary model being worked on is the soft MMU target to be able to
|
|
emulate the Shix 2.0 board by Alexis Polti, described at
|
|
http://perso.enst.fr/~polti/realisations/shix20/
|
|
|
|
Ultimately, qemu will be coupled with a system C or a verilog
|
|
simulator to simulate the whole board functionalities.
|
|
|
|
A sh4 user-mode has also somewhat started but will be worked on
|
|
afterwards. The goal is to automate tests for GNAT (GNU Ada) compiler
|
|
that I ported recently to the sh4-linux target.
|
|
|
|
Registers
|
|
---------
|
|
|
|
16 general purpose registers are available at any time. The first 8
|
|
registers are banked and the non-directly visible ones can be accessed
|
|
by privileged instructions. In qemu, we define 24 general purpose
|
|
registers and the code generation use either [0-7]+[8-15] or
|
|
[16-23]+[8-15] depending on the MD and RB flags in the sr
|
|
configuration register.
|
|
|
|
Instructions
|
|
------------
|
|
|
|
Most sh4 instructions have been implemented. The missing ones at this
|
|
time are:
|
|
- FPU related instructions
|
|
- LDTLB to load a new MMU entry
|
|
- SLEEP to put the processor in sleep mode
|
|
|
|
Most instructions could be optimized a lot. This will be worked on
|
|
after the current model is fully functional unless debugging
|
|
convenience requires that it is done early.
|
|
|
|
Many instructions did not have a chance to be tested yet. The plan is
|
|
to implement unit and regression testing of those in the future.
|
|
|
|
MMU
|
|
---
|
|
|
|
The MMU is implemented in the sh4 core. MMU management has not been
|
|
tested at all yet. In the sh7750, it can be manipulated through memory
|
|
mapped registers and this part has not yet been implemented.
|
|
|
|
Exceptions
|
|
----------
|
|
|
|
Exceptions are implemented as described in the sh4 reference manual
|
|
but have not been tested yet. They do not use qemu EXCP_ features
|
|
yet.
|
|
|
|
IRQ
|
|
---
|
|
|
|
IRQ are not implemented yet.
|
|
|
|
Peripheral features
|
|
-------------------
|
|
|
|
+ Serial ports
|
|
|
|
Configuration and use of the first serial port (SCI) without
|
|
interrupts is supported. Input has not yet been tested.
|
|
|
|
Configuration of the second serial port (SCIF) is supported. FIFO
|
|
handling infrastructure has been started but is not completed yet.
|
|
|
|
+ GPIO ports
|
|
|
|
GPIO ports have been implemented. A registration function allows
|
|
external modules to register interest in some port changes (see
|
|
hw/tc58128.[ch] for an example) and will be called back. Interrupt
|
|
generation is not yet supported but some infrastructure is in place
|
|
for this purpose. Note that in the current model a peripheral module
|
|
cannot directly simulate a H->L->H input port transition and have an
|
|
interrupt generated on the low level.
|
|
|
|
+ TC58128 NAND flash
|
|
|
|
TC58128 NAND flash is partially implemented through GPIO ports. It
|
|
supports reading from flash.
|
|
|
|
GDB
|
|
---
|
|
|
|
GDB remote target support has been implemented and lightly tested.
|
|
|
|
Files
|
|
-----
|
|
|
|
File names are hardcoded at this time. The bootloader must be stored in
|
|
shix_bios.bin in the current directory. The initial Linux image must
|
|
be stored in shix_linux_nand.bin in the current directory in NAND
|
|
format. Test files can be obtained from
|
|
http://perso.enst.fr/~polti/robot/ as well as the various datasheets I
|
|
use.
|
|
|
|
qemu disk parameter on the command line is unused. You can supply any
|
|
existing image and it will be ignored. As the goal is to simulate an
|
|
embedded target, it is not clear how this parameter will be handled in
|
|
the future.
|
|
|
|
To build an ELF kernel image from the NAND image, 16 bytes have to be
|
|
stripped off the end of every 528 bytes, keeping only 512 of them. The
|
|
following Python code snippet does it:
|
|
|
|
#! /usr/bin/python
|
|
|
|
def denand (infd, outfd):
|
|
while True:
|
|
d = infd.read (528)
|
|
if not d: return
|
|
outfd.write (d[:512])
|
|
|
|
if __name__ == '__main__':
|
|
import sys
|
|
denand (open (sys.argv[1], 'rb'),
|
|
open (sys.argv[2], 'wb'))
|
|
|
|
Style isssues
|
|
-------------
|
|
|
|
There is currently a mix between my style (space before opening
|
|
parenthesis) and qemu style. This will be resolved before final
|
|
integration is proposed.
|