xemu/hw/ppc_chrp.c
balrog 3d878caab9 Set default max_cpus to one.
Clean-up machine definitions.


git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5566 c046a42c-6fe2-441c-8c8c-71466251a162
2008-10-28 10:59:59 +00:00

340 lines
12 KiB
C

/*
* QEMU PowerPC CHRP (currently NewWorld PowerMac) hardware System Emulator
*
* Copyright (c) 2004-2007 Fabrice Bellard
* Copyright (c) 2007 Jocelyn Mayer
*
* Permission is hereby granted, free of charge, to any person obtaining a copy
* of this software and associated documentation files (the "Software"), to deal
* in the Software without restriction, including without limitation the rights
* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
* copies of the Software, and to permit persons to whom the Software is
* furnished to do so, subject to the following conditions:
*
* The above copyright notice and this permission notice shall be included in
* all copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
* THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
* LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
* OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
* THE SOFTWARE.
*/
#include "hw.h"
#include "ppc.h"
#include "ppc_mac.h"
#include "nvram.h"
#include "pc.h"
#include "pci.h"
#include "net.h"
#include "sysemu.h"
#include "boards.h"
#define MAX_IDE_BUS 2
/* UniN device */
static void unin_writel (void *opaque, target_phys_addr_t addr, uint32_t value)
{
}
static uint32_t unin_readl (void *opaque, target_phys_addr_t addr)
{
return 0;
}
static CPUWriteMemoryFunc *unin_write[] = {
&unin_writel,
&unin_writel,
&unin_writel,
};
static CPUReadMemoryFunc *unin_read[] = {
&unin_readl,
&unin_readl,
&unin_readl,
};
/* PowerPC Mac99 hardware initialisation */
static void ppc_core99_init (ram_addr_t ram_size, int vga_ram_size,
const char *boot_device, DisplayState *ds,
const char *kernel_filename,
const char *kernel_cmdline,
const char *initrd_filename,
const char *cpu_model)
{
CPUState *env = NULL, *envs[MAX_CPUS];
char buf[1024];
qemu_irq *pic, **openpic_irqs;
int unin_memory;
int linux_boot, i;
unsigned long bios_offset, vga_bios_offset;
uint32_t kernel_base, kernel_size, initrd_base, initrd_size;
PCIBus *pci_bus;
nvram_t nvram;
#if 0
MacIONVRAMState *nvr;
int nvram_mem_index;
#endif
m48t59_t *m48t59;
int vga_bios_size, bios_size;
qemu_irq *dummy_irq;
int pic_mem_index, dbdma_mem_index, cuda_mem_index;
int ide_mem_index[2];
int ppc_boot_device;
int index;
BlockDriverState *hd[MAX_IDE_BUS * MAX_IDE_DEVS];
linux_boot = (kernel_filename != NULL);
/* init CPUs */
if (cpu_model == NULL)
cpu_model = "default";
for (i = 0; i < smp_cpus; i++) {
env = cpu_init(cpu_model);
if (!env) {
fprintf(stderr, "Unable to find PowerPC CPU definition\n");
exit(1);
}
/* Set time-base frequency to 100 Mhz */
cpu_ppc_tb_init(env, 100UL * 1000UL * 1000UL);
#if 0
env->osi_call = vga_osi_call;
#endif
qemu_register_reset(&cpu_ppc_reset, env);
envs[i] = env;
}
if (env->nip < 0xFFF80000) {
/* Special test for PowerPC 601:
* the boot vector is at 0xFFF00100, then we need a 1MB BIOS.
* But the NVRAM is located at 0xFFF04000...
*/
cpu_abort(env, "Mac99 hardware can not handle 1 MB BIOS\n");
}
/* allocate RAM */
cpu_register_physical_memory(0, ram_size, IO_MEM_RAM);
/* allocate and load BIOS */
bios_offset = ram_size + vga_ram_size;
if (bios_name == NULL)
bios_name = BIOS_FILENAME;
snprintf(buf, sizeof(buf), "%s/%s", bios_dir, bios_name);
bios_size = load_image(buf, phys_ram_base + bios_offset);
if (bios_size < 0 || bios_size > BIOS_SIZE) {
cpu_abort(env, "qemu: could not load PowerPC bios '%s'\n", buf);
exit(1);
}
bios_size = (bios_size + 0xfff) & ~0xfff;
if (bios_size > 0x00080000) {
/* As the NVRAM is located at 0xFFF04000, we cannot use 1 MB BIOSes */
cpu_abort(env, "Mac99 hardware can not handle 1 MB BIOS\n");
}
cpu_register_physical_memory((uint32_t)(-bios_size),
bios_size, bios_offset | IO_MEM_ROM);
/* allocate and load VGA BIOS */
vga_bios_offset = bios_offset + bios_size;
snprintf(buf, sizeof(buf), "%s/%s", bios_dir, VGABIOS_FILENAME);
vga_bios_size = load_image(buf, phys_ram_base + vga_bios_offset + 8);
if (vga_bios_size < 0) {
/* if no bios is present, we can still work */
fprintf(stderr, "qemu: warning: could not load VGA bios '%s'\n", buf);
vga_bios_size = 0;
} else {
/* set a specific header (XXX: find real Apple format for NDRV
drivers) */
phys_ram_base[vga_bios_offset] = 'N';
phys_ram_base[vga_bios_offset + 1] = 'D';
phys_ram_base[vga_bios_offset + 2] = 'R';
phys_ram_base[vga_bios_offset + 3] = 'V';
cpu_to_be32w((uint32_t *)(phys_ram_base + vga_bios_offset + 4),
vga_bios_size);
vga_bios_size += 8;
}
vga_bios_size = (vga_bios_size + 0xfff) & ~0xfff;
if (linux_boot) {
kernel_base = KERNEL_LOAD_ADDR;
/* now we can load the kernel */
kernel_size = load_image(kernel_filename, phys_ram_base + kernel_base);
if (kernel_size < 0) {
cpu_abort(env, "qemu: could not load kernel '%s'\n",
kernel_filename);
exit(1);
}
/* load initrd */
if (initrd_filename) {
initrd_base = INITRD_LOAD_ADDR;
initrd_size = load_image(initrd_filename,
phys_ram_base + initrd_base);
if (initrd_size < 0) {
cpu_abort(env, "qemu: could not load initial ram disk '%s'\n",
initrd_filename);
exit(1);
}
} else {
initrd_base = 0;
initrd_size = 0;
}
ppc_boot_device = 'm';
} else {
kernel_base = 0;
kernel_size = 0;
initrd_base = 0;
initrd_size = 0;
ppc_boot_device = '\0';
/* We consider that NewWorld PowerMac never have any floppy drive
* For now, OHW cannot boot from the network.
*/
for (i = 0; boot_device[i] != '\0'; i++) {
if (boot_device[i] >= 'c' && boot_device[i] <= 'f') {
ppc_boot_device = boot_device[i];
break;
}
}
if (ppc_boot_device == '\0') {
fprintf(stderr, "No valid boot device for Mac99 machine\n");
exit(1);
}
}
isa_mem_base = 0x80000000;
/* Register 8 MB of ISA IO space */
isa_mmio_init(0xf2000000, 0x00800000);
/* UniN init */
unin_memory = cpu_register_io_memory(0, unin_read, unin_write, NULL);
cpu_register_physical_memory(0xf8000000, 0x00001000, unin_memory);
openpic_irqs = qemu_mallocz(smp_cpus * sizeof(qemu_irq *));
openpic_irqs[0] =
qemu_mallocz(smp_cpus * sizeof(qemu_irq) * OPENPIC_OUTPUT_NB);
for (i = 0; i < smp_cpus; i++) {
/* Mac99 IRQ connection between OpenPIC outputs pins
* and PowerPC input pins
*/
switch (PPC_INPUT(env)) {
case PPC_FLAGS_INPUT_6xx:
openpic_irqs[i] = openpic_irqs[0] + (i * OPENPIC_OUTPUT_NB);
openpic_irqs[i][OPENPIC_OUTPUT_INT] =
((qemu_irq *)env->irq_inputs)[PPC6xx_INPUT_INT];
openpic_irqs[i][OPENPIC_OUTPUT_CINT] =
((qemu_irq *)env->irq_inputs)[PPC6xx_INPUT_INT];
openpic_irqs[i][OPENPIC_OUTPUT_MCK] =
((qemu_irq *)env->irq_inputs)[PPC6xx_INPUT_MCP];
/* Not connected ? */
openpic_irqs[i][OPENPIC_OUTPUT_DEBUG] = NULL;
/* Check this */
openpic_irqs[i][OPENPIC_OUTPUT_RESET] =
((qemu_irq *)env->irq_inputs)[PPC6xx_INPUT_HRESET];
break;
#if defined(TARGET_PPC64)
case PPC_FLAGS_INPUT_970:
openpic_irqs[i] = openpic_irqs[0] + (i * OPENPIC_OUTPUT_NB);
openpic_irqs[i][OPENPIC_OUTPUT_INT] =
((qemu_irq *)env->irq_inputs)[PPC970_INPUT_INT];
openpic_irqs[i][OPENPIC_OUTPUT_CINT] =
((qemu_irq *)env->irq_inputs)[PPC970_INPUT_INT];
openpic_irqs[i][OPENPIC_OUTPUT_MCK] =
((qemu_irq *)env->irq_inputs)[PPC970_INPUT_MCP];
/* Not connected ? */
openpic_irqs[i][OPENPIC_OUTPUT_DEBUG] = NULL;
/* Check this */
openpic_irqs[i][OPENPIC_OUTPUT_RESET] =
((qemu_irq *)env->irq_inputs)[PPC970_INPUT_HRESET];
break;
#endif /* defined(TARGET_PPC64) */
default:
cpu_abort(env, "Bus model not supported on mac99 machine\n");
exit(1);
}
}
pic = openpic_init(NULL, &pic_mem_index, smp_cpus, openpic_irqs, NULL);
pci_bus = pci_pmac_init(pic);
/* init basic PC hardware */
pci_vga_init(pci_bus, ds, phys_ram_base + ram_size,
ram_size, vga_ram_size,
vga_bios_offset, vga_bios_size);
/* XXX: suppress that */
dummy_irq = i8259_init(NULL);
/* XXX: use Mac Serial port */
serial_init(0x3f8, dummy_irq[4], 115200, serial_hds[0]);
for(i = 0; i < nb_nics; i++) {
if (!nd_table[i].model)
nd_table[i].model = "ne2k_pci";
pci_nic_init(pci_bus, &nd_table[i], -1);
}
if (drive_get_max_bus(IF_IDE) >= MAX_IDE_BUS) {
fprintf(stderr, "qemu: too many IDE bus\n");
exit(1);
}
for(i = 0; i < MAX_IDE_BUS * MAX_IDE_DEVS; i++) {
index = drive_get_index(IF_IDE, i / MAX_IDE_DEVS, i % MAX_IDE_DEVS);
if (index != -1)
hd[i] = drives_table[index].bdrv;
else
hd[i] = NULL;
}
#if 1
ide_mem_index[0] = pmac_ide_init(&hd[0], pic[0x13]);
ide_mem_index[1] = pmac_ide_init(&hd[2], pic[0x14]);
#else
pci_cmd646_ide_init(pci_bus, &hd[0], 0);
#endif
/* cuda also initialize ADB */
cuda_init(&cuda_mem_index, pic[0x19]);
adb_kbd_init(&adb_bus);
adb_mouse_init(&adb_bus);
dbdma_init(&dbdma_mem_index);
macio_init(pci_bus, 0x0022, 0, pic_mem_index, dbdma_mem_index,
cuda_mem_index, NULL, 2, ide_mem_index);
if (usb_enabled) {
usb_ohci_init_pci(pci_bus, 3, -1);
}
if (graphic_depth != 15 && graphic_depth != 32 && graphic_depth != 8)
graphic_depth = 15;
#if 0 /* XXX: this is ugly but needed for now, or OHW won't boot */
/* The NewWorld NVRAM is not located in the MacIO device */
nvr = macio_nvram_init(&nvram_mem_index, 0x2000);
pmac_format_nvram_partition(nvr, 0x2000);
macio_nvram_map(nvr, 0xFFF04000);
nvram.opaque = nvr;
nvram.read_fn = &macio_nvram_read;
nvram.write_fn = &macio_nvram_write;
#else
m48t59 = m48t59_init(dummy_irq[8], 0xFFF04000, 0x0074, NVRAM_SIZE, 59);
nvram.opaque = m48t59;
nvram.read_fn = &m48t59_read;
nvram.write_fn = &m48t59_write;
#endif
PPC_NVRAM_set_params(&nvram, NVRAM_SIZE, "MAC99", ram_size,
ppc_boot_device, kernel_base, kernel_size,
kernel_cmdline,
initrd_base, initrd_size,
/* XXX: need an option to load a NVRAM image */
0,
graphic_width, graphic_height, graphic_depth);
/* No PCI init: the BIOS will do it */
/* Special port to get debug messages from Open-Firmware */
register_ioport_write(0x0F00, 4, 1, &PPC_debug_write, NULL);
}
QEMUMachine core99_machine = {
.name = "mac99",
.desc = "Mac99 based PowerMAC",
.init = ppc_core99_init,
.ram_require = BIOS_SIZE + VGA_RAM_SIZE,
.max_cpus = MAX_CPUS,
};